Connecting SBLive 5.1 Digital to Sony 5.1 Home Cinema Sys

Hi,
Anyone know which is the best cable to connect the above. I think I need a Digital DIN to TOSlink cable but cannot find one anywhere in the UK.
There are digital connectors on the daughter card from my soundcard and a TOSlink connector on my Sony HCS.
Can anyone help.
NickMessage Edited by thefunkymunky on 2-06-2005 04:7 PM

Hi Jason,
The Sony HCS also has standard red/white phono inputs and coaxial (looks like a phono input but different colour) as well as the TOSlink.
Whats the best way to connect up to get 5. surround sound from the SBLi've. Should I use the SPDIF output on the SBLi've instead?
Thanks.

Similar Messages

  • APTV2 and Sony DAV-DZ630 Home Cinema

    Hi,
    I have just received my new APTV2 and want to connect it up to make use of my home cinema.
    I have used a HDMI lead to connect APTV2 to my TV, (Sony KDL-37V4000), but no audio/sound is returned through the TV, picture display is fine.
    There is an optical output on APTV2, but there is no optical input on my home cinema (Sony DAV-DZ630), there is just a DMPORT and a red and white AV in connectors.
    I've tried searching on line for a cable which converts from optical to DMPORT but can't see any available, can some one let me know how to get this set-up?
    Thanks!
    SMT.

    I connect the tv to the home home cinema via a HDMI lead. The tv has Bravia Sync, but I don.y think it is set up correctly......
    I don't have very much knowledge of AV gear, which doesn't help in these situation.....
    Thanks!

  • Connecting 30GB to Home cinema system

    Hi
    I have just bought a Samsung TV and Samsung Home cinema system. On the front of the DVD player, there is a USB port. I have tried connecting my ipod to this, but it doesn't seems to work. Does anyone have any idea how I can connect my ipod so that it plays through the home cinema system.

    Hi
    I've successfully managed to do this with my LG Cinema System (Model : LHT760IA - Link via the USB port. However, you can only play none-protected AAC or MP3 encoded files so anything you purchased from iTunes store will not play. I will also admit that the iPod will intermittently disconnect from the DVD player and you have to un-plug and re-plug to re-activate it making continued use a problem so overall not a very good way of using you’re iPod with your system. Consequently I recommend using the iPod Doc and the AV cables plugged in to the AUX Input socket on your DVD/Cinema system for uninterrupted playback as I now do having given up on the USB port. Clearly LG didn’t envisage the use of the USB port for much more than card readers or digital cameras for picture viewing. Incidentally this problem (the random disconnect) also occurs on my XBOX360 if I connect the iPod via the USB socket on that, so may be actually turn out to slightly related to the iPod itself?
    Regards
    Jay

  • Digitally Connecting Soundblaster audigy 2 to sonydav s550 home theatre sys

    Hi, I have a Soundblaster audigy 2 im not sure which model but it has a pink digital out audio socket on the back of it. My sony system has a digital optical in socket on it. I am having problems connecting them. I brought the following
    http://www.maplin.co.uk/Module.aspx?...gital&doy=26m5
    as it has a miniplug adaptor which i thought I could use on one end to connect to my soundcard digital output and connect the other end to my home theatre system. Did I get the wrong wire? If so what wire will I need to connect them, will miniplug not fit on the soundblaster digital out, what does? I have messed around with the control panels with no luck. Anyone have any ideas, by the way Im new to this. Thanks in advance

    Hello all,
    I am having a similar issue. I would like to connect my Audigy 2ZS to a Sony Reciever (STR DE-898) preferably via the digital out. The sound card and reciever are 25 feet apart.
    I have read that the digital out on the Audigy 2ZS is specifically for creative lab speakers, and that if you connect it to a normal reciever that it may damage the reciever is this true?
    Second, the other option that I have is to buy the 7. adaptor and connect RCA extension cables to the reciever.
    The last option is to connect it to the regular headphone jack out, and use an extension cable to connect to the reciever (This is what I am currently using), but the sound quality is terrible.
    Please help, I read the recent post on digital out ,which helped some, but still the question remains... if you connect the digital out on the Audigy 2ZS to a Sony receiver will this damage the receiver?Message Edited by asharabi98 on 05-27-2006 0:38 AMMessage Edited by asharabi98 on 05-27-2006 0:39 AM

  • How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

    How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

  • I bought an HDTV cable to connect my MacBook Pro to my Sony TV via HDMI so I could watch videos from my computer on my TV.  My TV then shows my basic computer background but the videos won't play.  What am I doing wrong?

    I bought an HDTV cable to connect my MacBook Pro to my Sony TV via HDML.  The TV recognizes my computer; I see my basic computer screen on the TV. I tried to watch videos on my TV but got nothing. (tried via my facebook vidoes and Youtube.  What am I doing wrong?

    I've got a similar (but different!) problem: I have a MacBookPro3,1 running Mac OS X 10.6.8. I want to connect to my HD TV using a HDMI to DVI cable but the MBP cannot detect the TV display. What's the solution? Is this a bug in Mac OS X 10.6.8 ? Any ideas what I can do to make things work with the HDMI to DVI cable. (N.B.: I have separate audio cable running from the MBP to amplified speakers for the sound side of things. It’s the video that’s the problem!)

  • How to connect I pad with lap top Sony Vaio

    Hello,
    I have an Ipad and I would like to connect it with my Lap top Sony Vaio with using the bluetooth system. And the problem that I have, my computer ask me to insert the disk and I have not this disk.
    How I can do with out this disk.
    My computer is with Windows Vista
    Thanks for your answer

    To answer your original question, you can connect your Sony Vaio with your iPad using the cable that came with your iPad. Bluetooth connectivity is not supported. You move photos and other documents from your laptop to your iPad with iTunes which can be obtained from the Apple website for free. The iPad is not like another computer or a disk that you can connect to your laptops.

  • Best cable to use to connect an Airport Express to a Sony DE 1075?

    Hi, Does anyone have suggestions on the best kind of cable (RCA etc) to use to connect an Airport Express to a Sony DE 1075 receiver (the receiver was purchased about 10 years ago)...I have the receiver hooked up to a Bose Acoutimass 15 sound system. Thanks,

    If you plan to use the AUX input on the Sony receiver, then you will need a cable that consists of a 3.5 mm Stereo Mini plug on one end and 2 RCA plugs on the other.
    The RCA plugs are almost always color coded red and white to designate the left (white) and right (red) channel.
    Any electronics superstore will have what you need, as will the Radio Shack.
    If you are still not sure what you need, take a picture of the back panel of the Sony receiver using your camera phone and take the AirPort Express with you to the store.

  • I can't import my photos from my digital camera (Sony) this problem is recent. I have imported photos without  problem a problem before.

    I can't import my photos from my digital camera (Sony) to my iPad, this problem is recent. I have imported photos without  problem a problem before. Is this problem due to the IOS 6 update? How can I fix it?

    I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!

  • Digital Connections, SPDIF and Dolby Digital Info

    I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
    Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
    Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
    ) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
    2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
    3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
    PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
    Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
    N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
    More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
    Dolby Surround info: http://www.dolby.com
    I hope that clarifies the issue .
    Message Edited by KokChoy-CL on 07-04-2008 :0 AM

    Digital Connections, SPDIF and Dolby Digital (german revision)
    Options
    03-08-2007 01:52 AM
    Digital Connections, SPDIF and Dolby Digital Info
    Übersetzung + Erweiterungen + Revision 03-08-07
    Der Digitale Anschluß
    Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
    Digitale Anschlüsse – S-PDIF & Toslink
    Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
    Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
    Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
    !! Update !!
    Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
    ( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
    In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
    Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
    Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
    Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
    Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
    !! Der einfache Weg !!
    Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
    - Glasfaser als Trägermaterial
    ( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
    aufwendige Wege
    Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
    (Massetrennung )
    + die elektrische Verbindung der Schirmung wird umgangen
    - aber Leistungs- & und Klangverlust(geringere Dynamik)
    - Verwendung von ( hochwertigen ) symmetrischen Verbindungen
    ( „PLUS“ „MINUS“ „Masse“)
    + Trennung der Schirmung an einer „Seite“ des Kabels möglich
    [bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
    anschließend dieses Kabel wertlos ist ]
    - sehr große Anschlüsse
    - Profibereich
    - Einsatz einer zentralen Spannungsversorgung für alle miteinander
    verbundenen Geräte
    Nachtrag
    Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
    - End - !! Update !!
    Einige Vorbetrachtungen
    Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
    Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
    Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
    Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
    Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
    Drei Varianten der Decodierung sind möglich.
    (1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
    Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
    Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
    In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
    Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
    Bitte merken:
    Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
    (2) - AC3 / DTS mit der Soundkarte decodieren
    Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
    In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
    Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
    ( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
    - die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
    - wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    [ mehr unten ]
    (3) - AC3 / DTS mit einer Software decodieren
    Wenn deine Soundkarte kein DolbyDigital unterstützt
    ( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
    (Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
    Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
    Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
    Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
    ( "SPDIF Pass-through" ) ausgeschaltet ist.
    Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
    Wiedergabeformate möglich.
    In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
    PC Spiele
    PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
    ( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
    Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
    !!! Notiz !!!
    X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
    Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
    Flexi-Jack - DigitalDIN
    Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
    3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
    für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
    - Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
    - Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    - Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    Das digitale E/A-Modul ( Digital I/O – Modul )
    Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
    Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
    Achtung !!
    ( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
    zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
    Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
    Front Panel-Sockel (für Geräte der SB073X-Serie)
    2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
    Anschlusskompatibilität
    Ausschließlich Intel HD Front Panel Audio-Standard
    Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
    Einschränkungen
    Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
    Sound Blaster X-Fi E/A-Konsole
    Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
    So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
    -eof-

  • Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.

    Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.

    Download and install the latest iTunes. Once you  satisfy that requirement the warning will go away.

  • 25 Sony 8mm old Home videos importing as ntsc best import/export settings

    I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
    Thanks for your time.

    I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
    Thanks for your time.
    *((((You will need to convert the analog video to QuickTime using Apple DV-DVCPRO NTSC codec. The normal way to do this is with an analog-digital converter such as the Canopus ADVC-110 or ADVC-300 (not the ADVC-mini). However, if you have a miniDV camcorder that supports analog-digital passthrough then you could use the camcorder as the converter device.)))))*
    I was lucky and found a sony camera that I hooked a four pin firewire to a 9 pin (800) to my mac.
    *(((Keep in mind that DV video requires about 13GB per hour. If your 8mm tapes are all 120 mins (2 hours) long, you will need about 650GB to store all the captured video. Sounds like a 1TB drive to me. BTW - Firewire, not USB.)))*
    I was thinking 2TB
    *(((You need to capture the video in FCE. The proper easy setup is the DV NTSC DV Converter easy setup. Editing will then be done in a DV NTSC sequence.*
    *How you export from FCE depends on what you want to do with the finished video. If you just want to burn DVDs, then export to QuickTime Movie. If you want to save the video at its 'full resolution' then also export as a QuickTime Movie. If you want to post to the web, or do certain other things with the finished video, you would export to QuickTime Conversion.))))*
    I just want to store it on 2 hard drives one connected to a pogo plug so my family can see them and store the second at my brothers house as the back-up. What would be the best format for that?
    Now you know my hardware so should I import the whole 2 hours or batches of like 1/2 hour segments.
    Again thanks for your help this is saving me many trials and errors.

  • 770-c45 connect with Home Cinema via coaxial

    Hi there, I just bought a new computer with the 770-c45 motherboard in. I'm trying to connect it with my Home Cinema amplifier, via coaxial cable just like I already have my old computer. In the rear panel I put the mini jack in the black pin but I can't get any sound. My Home Cinema is Sony dav dz260 and it supports Dolby Digital 5+1.
    I installed the latest drivers for the motherboard but nothing seems to happen. When I connect the cable in the black pin, it recognizes it as an analogue connection. The cable is mini jack at the one end of the cable and at the other one RCA. Could you please help me

    Quote from: satyros on 04-September-09, 05:31:26
    c mon guys.
    THE MONEY IN THE ENVELOPE?
    And..? What wrong you see in this? Also as explained you will have to pay much less by that way.
    Also as they said they can make it by other ways if you prefer , but you have to pay more.
    They are not asking from you to put the money in a bottle and to drop it to a sea to travel to MSI by wave power.. :D
    Quote from: satyros on 04-September-09, 15:15:39
    The point is tha after that answer I don't trust them .
    Nice joke :D MSI is not gonna lie you or trying to steal your money

  • Connecting IMac to home cinema amp

    Hi everyone, basically im looking to connect my IMac to my home cinema amp so that i can listen to audio through decent speakers. It'd be great if you guys could suggest the best way of doing this? Im guessing an optical digital cable would be best but i cant see an optical port on the IMac? i have seen speaker cables that hook into the headphone jack but im not sure if this will diminish the audio quality?
    Thanks
    Bunts

    The headphone jack on your iMac also supports optical out (DD 5.1), you simply have to get the cable with optical connection for your amp the other end to connect to your iMac. Another suggestion based on where your home cinenma is in relationship to your iMac is to do a wirelss connection using an Airport Express. The Airport Express has a connection (the same as your iMac) that allows you to stream your music from your iMac to your home cinema.
    I have my system set up as the latter because I have (what I consider) a nice home theater system, the amp/speaker section is much much much better than my iMac however I don't want wires all over the place.

  • Pairing iphone 5 to a sony home cinema system

    Hi there.
    I recently purchased a sony BDV E3100 home theatre system and tried to pair my iphone 5 to it via bluetooth to enable me to listen to music through it, but it just doesn't seem to find the device. I've spent ages trying but no joy.
    Any suggestions?

    Hi Robby218,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps you can try for issues with your iPhone's bluetooth:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    - Ari

Maybe you are looking for