Connecting seconf laptop to my wirelerss router

i cannot get my son's new laptop to receive the signal from my wireless router. he gets limited connection (no internet).
thanks for help

What is the Model no of the Router..?
Make sure that you are typing the correct security key to join your wireless network..Open the setup page of the router by typing 192.168.1.1 in the address bar...Under the Wireless tab,click on the subtab Wireless Security and check the security key..If you are using WEP Security then,use Key1 as the Security Key.

Similar Messages

Trying to connect three laptops to a WRT54G Router

We never had this issue until today but all of a sudden, the router isn't connecting with my two sons' laptops. Mine is okay. I think the problem has something to do with us all sharing the same address. Should we each create our own network or have a unique identity number to differentiate so it will let us all be on at the same time? I'm not sure where to go to fix this. I know all the numbers and passwords to put in but seem to be missing that one piece of the puzzle to make it all work.
Thanks for your assistance.

Try to adjust the wireless settings on the router and try to reconnect the laptop again.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab... Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...Set the Wireless channel to 11-2.462GHz... Wireless SSID broadcast should be Enabled and then click on Save Settings...
Click on the Sub tab under Wireless > Wireless Security...Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey.Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings...Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Connecting a laptop to my wirless router

When I try to connect to my linksys router it fails,
My OS is XP Pro, it tells me "the actions cannot be
completed". I'm going into setting up a new network
wirless connection, is this the right way to do this.
It also saids something about using a flash drive to
load info onto, I tried this but it did not work. Also
went to another page and got enter SSID and WEP
key. Are these two the same? My WEP key is a 26
characters. I can view my wirless connections and see
mine and it show a lock beside it. I try to connect through
here, but it also fails. Any help would be great
Thanks,
Farris

The correct way is to view available wireless network, and try connecting to your network by typing your WEP key. If it is not working that means the WEP key you have is incorrect or you are not typing it correct. Make sure the 26 digit key only has 0-9 and A-F

Connecting a laptop PC to a wireless router on an iMac

I cannot get a laptop PC to connect to the internet through a Linksys wireless router I have connected to my iMac. It was working great for a while, but the network disappeared from the laptop's "available networks" box, and I've been trying for hours to get it to work again. The Mac help desk was of no help and said I had to call Linksys, however, I think it is how I have the network or sharing configured. I've changed so many thinks trying to get it to work, I have probably messed all the configurations up.
This can't be that hard. Can anyone help? Thanks in advance

Since you already have the iMac connected, via Ethernet, to the Linksys router, you'll want to disconnect the modem's USB connection to the iMac.
Which model Linksys to you have? If it has more than one Ethernet port, try connecting the PC to one of the Linksys's Ethernet ports and verify that you can get an Internet connection.

How to connect printer, win laptop, & anroid phone through router

Without knowing the specifics.
Cloud Print.
http://www.google.com/cloudprint/learn/

How to connect printer, win laptop, & android phone through router
This topic first appeared in the Spiceworks Community

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Wireless connection to D-Link DIR-655 router

I just got a MBP and I can't connect wirelessly to my D-link router (WPA password protected; wired connection works great). Aiport sees the router, asks for the password which I enter, and then I get the message "the selected network uses and Access Control List.. and this computer is not on the list." I've tried to add the MBP to my network using the Network Magic process for adding new devices (which worked just fine to wirelessly connect my PC laptop from work), but it can't seem to find the MBP. I tried the steps suggested by iVmichael to someone having a similar problem April 5-6, and also tried disabling my network lock, but so far haven't found the magic combination. Suggestions?
MacBook Pro Mac OS X (10.4.8) D-Link DIR-655 router
MacBook Pro Mac OS X (10.4.8)

I had a similar problem and I needed a second computer (B) using a wired connection to the router to allow the other one (A) in. This is what I did:
1. Using the wired computer (B) I opened up the network so any computer could join the network wirelessly.
2. I joined the network with (A) wirelessly.
3. Once I had successfully joined the network with (A) I used the wired computer (B) to do a search for new computers so (A) could be registered in the Access Control List.
4. Using (B) I closed the network again.
5. Now I could join the network with (A) wirelessly without any trouble.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How to use a second laptop with my old router

Hello, I'm trying to use a second laptop with my old router (model BEFW11S4 v.2) for a work project. I've tried two diff computers and neither will connect, each giving different error messages. The work laptop I have right now will hook up to an unsecured network and will ask me for a network key for other detected secured networks, but tells me to refresh and search for networks again when I try to hook up to my network. My personal laptop hooks up to the internet just fine. Help! Mo

Please go to the wireless tab for all the information you need. Click the link below for instructions. Let us know how it goes.
Checking the Wireless Settings on a Linksys Router
Connecting a Wireless Computer to go Online Using a Linksys Router

Connecting new laptop to DSL

I have a desktop that is currently connected directly to DSL. I now have a new laptop that I want to connect to the same DSL as well. I plan on eventually buying a router to connect both the desktop (direct connection) and the laptop (wireless) to the DSL. First, I want to see if I can connect the laptop directly to the DSL modem via the Ethernet connection so I can download AOL software. When I installed DSL on the desktop I remember there being a CD as part of the installation. I can not find this CD so will I be able to connect the laptop to the DSL without this? Likewise, later when I setup the wirelesss router, will I need this CD?
Thanks.
Dave.

Yes, you will probably need that cd( It wouldn't hurt to try anyways). You could also just get our gateway which is a modem/router and it will probably be a little bit cheaper than actually going out and getting a new router. You can call 1-800-567-6789(8am-6pm) and go into the equipment department.
Message Edited by vztelecom on 04-15-2009 08:00 PM

WRT54G dropping wireless connection on laptop

My laptop (WinXp SP2) is frequently loosing it's wireless connection to my WRT54G router. It seems to happen on a random basis. Sometimes, I'll boot the laptop and I'll have my connection, sometimes I won't have it. When I have the connection, I may loose it for no apparent reason. It may happens even when my laptop is near the router. There's no wireless phone close. Microwave is not working. I'm in an appartment so it might be a wireless channel problem. I have yet to try that.
I have the lastest firmware upgrade (8.00.2). I have activated WPA2 security and MAC filtering. I'm using aes for WPA entryption method. Naturally, I have downloaded the microsoft patch for WPA2 on the portable. I have tried to change the MTU size to 1498 instead of 1500 to see if anything would change. From my tests, the default value was right on anyway. I have tried without WPA2 security (just MAC filtering) and I still got the same problem.
I also have a Wii which is connected wirelessly to my router who experience the same problems. My desktop computer is wired connected to my router and never has any problem. So it's really just a wireless problem.
Has anyone experienced a similar problem?
Thanks

try to change the wireless channel, you could choose from 1-6-11 i suggest 11...and try to check the advnced wireless settings set the beacon interval=50 fragmantation threshold=2304 and RTS threshold=2304
with the mac filtering that you have make sure that the MAC addres of your wireless computer is properly saved there...

I currently use a mifi device to connect my laptops to the internet, can I use the iphone 5c as an internet access point for them

Can the iphone 5c be used as a router to connect my laptop to the internet???

Yes, but it depends on what plan you have.
What plan name do you have as stated on your bill. If it says More Everything, the hotspot functionality is already included.

Connecting seconf laptop to my wirelerss router

Similar Messages

Maybe you are looking for