Connecting SLD to Sol Man 4.0

Hi all,
I am trying to push my sld data to Sol Man 4.0. I have set up smsy_setup and ran sldcheck and set up sldapicust and everything seems o.k. but when I try to execute the job to pull data (SMSY_SETUP) and I review the update log I see a message stating "the sld server is inactive" and I am not sure why. I can log into sld and it's up an running so I don't know where to turn next.
One thing I do get is when I run sldcheck there is a message saying "No business systems found"?
Thanks,
Rodney Miller

Hi Rodney,
is the SLD brigde also running?
Go into SLD -> Administration -> Data Supplier Bridge, set update local SLD to true and start the bridge.
Business systems are only needed for XI, but not for what Solman is using.
Regards,
Pascal

Similar Messages

Sol Man 7.1 - SLD / LMDB Synchronisation Error

Hi experts,
I am trying to perfom a full synchronisation between LMDB of Sol Man 7.1 and our Central SLD (CIM 1.6.16, SAP_CR 7.3)
Somewhere around 20% - 30% the full synch gets an error and restarts automatically at 0%.
Error message in application log is:
Error in method call SAPExt_EnumerateInstancesNoSubclasses: Failed to leave transaction:
Full sync failed for class SAP_SoftwareFeatureSoftwareComponent
Full sync needs to be repeated after correcting this error
Error message #s:
BL001
LMDB_CS_ERROR023
LMDB_CS_ERROR024
Did raise a call already but no useful response until now.
Anyone else had problems like this?
Thanks

Hi,
[Note 1480419 - Release Restrictions for SAP Solution Manager 7.1|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1480419], this note saying the restriction on LMDB and SLD sync, Moreover they are suggesting to upgrade SP01 to fix the LMDB issue..
Have you tried out?
Thanks,
Jansi

Connecting satellite system through Sol Man

Dear friends,
I am working on Sol Man 4.0 SP 12.
I have properly set the T-RFC roles to users in both satellite system as well as in Sol Man system.
Now i want to execute the transaction MM01 (creation of material master) from Sol Man. If i execute the transaction, i am getting the message that
"The new session will be created in SD1 system".
The SD1 system is my R/3 dev system. But the new session is not at all getting displayed.
I could not find the reason. If there is a problem in RFC, system will clearly tell the message.
Could anyone suggest me reason for this kind of system behaviour?
Regards
Senthil

Dear Senthil,
Have you defined any user for the RFC's specially the Trusted RFC ? If yes is it an Dialog user or an communication user ?
Also does the userid in Satellite system have the authorization to execute MM01 ?
Regards
Amit

Integration SAP Sol Man Service Desk and HP OV Service Desk

Hi!
We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
As I understand, the interaction is realised wia web interface
In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
Desk sad that where no this srvice.
Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?

Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API.
However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.) HP has tested this interface at SAP and recieved certification several months ago.
I would have your HP person escalate this issue higher in HP.

Sol Man HP QC Integration -Install TAO Client

Hi Team,
I am having the requirement to integrate SAP Sol Man with HP QC. In the process, it has been mentioned that, "Install TAO Agents in the SAP Backend systems".
What is TAO clinet? Why this is to be installed?
Backend system means , all the satellite systems which have been conneted with sol Man?
Thanks in advance
Kumar

Hi Kumar,
What is TAO clinet? Why this is to be installed?
This is just another type of application. The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components. Its tight integration with SAP Solution Manager helps in identifying the impacted test cases and components when there are changes in the landscape. The SAP Test Acceleration and Optimization application creates modular test cases, which are easy to maintain, when the test cases are damaged due to functional changes.
The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components for SAP GUIu2013based transactions. Using this application in combination with the SAP Quality Center application by HP, you can modify, compose and execute automated business process tests in SAP software development and test systems. The SAP Test Acceleration and Optimization application also provides a lot of reusable library components, which could be used for test composition.
Backend system means , all the satellite systems which have been conneted with sol Man?
It might be all the systems or the system through which you want to perform, or the systems that you want to test the Business Processes
For more details please check these SAP Notes.
Note: 1391728 SAP TAO 2.0 Release and Upgrade Information.
Note: 1404715 SAP TAO 2 Installation Information.
SAP TAO Agent will be available with the SAP Solution Tools Plug-In ST-PI which has to be implemented on all the managed systems that we are planning to connect to the SolMan and SAP TAO systems.There is a compatibility matrix which you can find in the Note: 1404715.
Also you can find some materials and demos under http://service.sap.com/testing Test Management and Media Library.
Hope this is helpful.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Jul 2, 2010 6:42 AM

Reg Jobs in Sol Man

hi Experts,
I would like to know if we can create jobs in Solution Manager and monitor it also.
Or does it need a seperate software to create jobs and monitoring only done in Sol Man
Thanks

Preema,
You can create Jobs in Solman as well as monitor jobs of other connected systems.
Thanks
Prince

Error while copy document in Sol Man

Dear friends,
I am working in Sol Man 4.0.
I have loaded the doc 'ABC" in SOLAR02. Now i want to copy the document in RMAMAIN using the option
"Assign Document" ---L> as a copy, i am getting the following error
"FOLDER CLASS IWB4FOLDER is NOT valid for objects of info object class SOLARGEN"
Please guide to solve this..
Regards
Kumar

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

Generation of Configuration document through Sol Man

Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).
How to do this?
regards
Senthil

Dear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil

Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0

Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind Serikar

Hi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo

Latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0

Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan Do

Hi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan

SAP Sol Man 4.0 Config guide

Can some one tell me where i can find SAP Solution Manager 4.0 config guide?
Also can some one send me any material for Sol Man certification exam.
will reward points
thanks
PR

Hi PR,
please have a look at: www.service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 4.0 for the Configuration Guide and other related Guides such as the Master Guide etc... Here you will also find links to other material.
For configuring the Solution Manager you need to go to transaction SPRO in your SolMan. Here you'll find the configuration of the Basic Setting, whcih you need to get it running and the scenariospecific settings, which are relevant for the scenarios.
Best regards,
Annett

SQL 2005 Authentication for Sol Man 4.0

Hi,
I have used the SQL4SAP.VBS to install SQL 2005 Entp Ed for Sol Man 4.0.
I do not know what authentication mode has been setup by this script
How do I know this ?
How can i change the mode to mixed mode as reuqired by Sol Man 4.0
I havent started the SAP Inst yet .
Thanks
Uday

Hi,
This is how you need to check.
1. In the Enterprise Manager, select the server and then choose Action ® Properties.
The SQL Server Properties dialog box opens.
2. Select the Security tab.
Here you can see. Hope this solves your problem. Feel free to revert back.
--Ragu

Sol Man 4.0 and Test Director 8.0

Hi,
We currently run Mercury's Test Director 8.0 (SP2) where we store all of our manual and automated test scripts.
We are also planning to use our Solution Manager 4.0 to create our project, our blueprint/configuration and from there on link our test cases to the process steps.
I've read that there is integration between Test Director.
What I'm looking for is that since all of our test scripts are stored in Test Director, is it possible to link those individual scripts to each process steps.
In the Test Case tab of Sol Man, there is the Test Case Type column with several options. If I select "Test document" and use "Web Link" to link to the test script, it would only bring me to the log-on page of Test Director upon which I would need to log-on and then search the Test lab for my script.
Just wondering if there's a way to accomplish (without downloading all of our scripts from Test Director and then uploading them to Sol Man.
Any thoughts would be appreciated.
Thanks
Danielle

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Sol Man 4.0 and Reporting out to BW

We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in 0CRM_SRV_PROCESS_H and 0CRM_SALES_ACT_1, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney Company

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Digital Signatures in eCATT or Sol Man

Hi All,
How can we include digital signatures feature either in eCATT scripts or in sol man.
Regards,
Justin

HI Justin,
I am afraid I cannot be of much help either as it very much seems like SAP has not extended the digital signature functionality besides it's current support for approvals of test documents and notes in the test management domain.
To be able to use this function:
SAP Solution Manager -> Scenario specific settings -> Implementation -> Document Management -> Digital Signature & Document status
Please note that there is a 'catch' here which might be of help to you : Manual test cases of type - 'Test document' can also use this feature.
I did not find any customizations possible for automated test cases like eCATT
I, myself, am not in a position to try this feature and let you know.
However, if you are interested in the document, please revert with your email id so that I can mail it to you.
Byeeee!

Connecting SLD to Sol Man 4.0

Similar Messages

Maybe you are looking for