Connecting solution manager to Hp quality center

Dear friends ,
could someone please give me the steps involved in connecting Solution manager to Hp quality center to be used for testing purposes , any documents or links describing this configuration will be greatly appreciated
thanks
Harsha

Hi Harsha,
Check Note: 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
Here you will find all the steps required.
Thanks & Best Regards,
Raghavendra.

Similar Messages

Are Documents exported or linked from Solution Manager to HP Quality Center

Dear all,
I don't find an answer to this questions out of the documentations of the HP QC neither in the SAP notes.
By example: if I'm marking a project document in a blueprint to be transfered to HP QC, will it be physically copied or will a link (PHIO / LOIO) been created to the content server document and the link will be transferd to the HP QC.
Any help is useful. Thanks in advance.
Detlev

Links are created in QC to the Solution Manager documents; this works fine for files that are actually stored in Solman, however, I am encountering an issue when the Solman doc is a web link. The link in QC produces an error "File does not begin with '%PDF-' and document cannot be viewed

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Connect Solution Manager to Portal search

Hi Experts,
currently we have the requirement to connect our Netweaver Portal Search to SAP Solution Manager. The search should find documents saved in the Solution Manager.
After searching the SDN I found some hints but came to the opinion that there does not exist any standard approach. Is this true?
Following some more details describing my problem:
The Solution Manager is also used to save project related documents like concepts etc. These documents have to be found if the user enters a query in the NetWeaver Portal. The documents should only be saved in the Solution Manager, so it will be no solution to save the documents in KM.
The hints that I currently found:
Indexing documents - SolMan Document-Management Search
SolMan and Portal - Accessing Solution Manager 4.0 documents using KM
Using KM in Solman (the other way around) - KM in Solman
Any suggestions are welcome.
Kind regards,
Jan Tilo

Hi,
I hope below links will help you.
PDF link
https://websmp206.sap-ag.de/~sapidb/011000358700006381312006
SAP Tutor link
https://websmp206.sap-ag.de/~sapidb/011000358700006477102006E.sim
In order to connect solution manager to OSS means you need to configure the systems in solution manager using T-code SMSY.
After configuring you need to configure maintanace optimizer in solution manger.while configuring you need to specify the your S user id.
The above links will help you.
kiran kumar.v

Connect solution manager to OSS - guide

Hi,
I couldn't find any notes or guide for the process. Can someone guide me
to a guide or note of How to connect solution manager to the oss ?
Best regards,
Dimitry haritonov
Message was edited by:
Dimitry Haritonov

Hi,
I hope below links will help you.
PDF link
https://websmp206.sap-ag.de/~sapidb/011000358700006381312006
SAP Tutor link
https://websmp206.sap-ag.de/~sapidb/011000358700006477102006E.sim
In order to connect solution manager to OSS means you need to configure the systems in solution manager using T-code SMSY.
After configuring you need to configure maintanace optimizer in solution manger.while configuring you need to specify the your S user id.
The above links will help you.
kiran kumar.v

Connection Solution Manager - Wily Enterprise Manager

Hi all,
we want to use SOlutionDiagnostics to monitor our abap and java instances. First, we would like to connect a abap system
to our Enterprise-Manager and watch the results in solution manager.
In transaction http//solutionmanagerhost:port/smd we are able to connect manually to our enterprise manager und log in, but solution manager didn't find the enterprise manager. ( we got the message: all the enterprise manager are offline ).
What could be the reason ?
How is an abap system registered in Enterprise Manager ? For java systems you have to add addiontianl java parameters in configtool. But for abap systems ?
is there any howtoguide, how to connect systems to diagnostic and wathc the results in solman_workcenter für E2E ?
the solution manager diagnostic instance ist already installed and registered over http://>SOLMANHOST>:/smd/go/ADMIN_AGENT
kind regards
andreas

Hello,
Are you using versin 8.0? If not use version 8.0.
Regards,
Paul

Connect Solution Manager to which client for SMD

Hi all,
do I have to connect the solution manager to the productive client of the sat. system?
We have systems with more than one productive client. Can we connect the SDM to more than one client? How can we do this?
Thank you
Timm Funke

Hi,
thank you for this quick response!
So it is possible to configure the landscap with client 000.
Then, when all sat. systems are working fine within SMD, I can configure the producitve clients in smsy (the rfc destinations to the producitve clients). then I can access these clients from SMD.
Is this right?
Kinde regards
Timm

How do i start doing SolMan integration with HP Quality Center?

Hi guyz,
I am new in this SAP field with zero knowledge on it and my first task being assigned to me is to integrate SolMan with HP Quality Center. So how do i start? What do i need to know before doing the integration? As iI know by far SolMan need to have QC adapter to communicate with HP Quality Center. What is the adapter anyway? Correct me if i'm wrong. Really need you guyz expertise on this. Thanks.

Hi,
The SAP Solution Manager Adapter for SAP Quality Center by HP is an interface between
SAP Quality Center by HP and SAP Solution Manager. SAP Quality Center by HP extends
SAP Solution Manager testing capabilities u2013 together they achieve a full integration of test
people, test processes and test data in the SAP Solution Manager Application Management
Platform. The integration on SAP Solution Manager side is realized via the SAP Solution
Manager Adapter for SAP Quality Center by HP.
After installing the Adapter, please check the Note: 1285941 for the installation of EIM versions and Solution Manager versions.
Please refer how to guide in Learning Maps.
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706460&_SCENARIO=01100035870000000202&
We have to check for the activation of SM_QC_AD Enterprise Addon from IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate
Solution Manager Enhancements.
Then follow the IMG activity transaction spro: Scenario Specific Settings-> Third Party Integration-> SAP Quality Center by HP-> Integration Test Management & Integration Defect Management.
Hope this helps.
Thanks,
Raghavendra.

SolMan integration with HP Quality Center

Hi Friends,
Is there any way by which we can integrate Solution Manager with Mercury Quality Center?
Please let me know.
Thanks,
Rock

Hi Rock,
The short answer is - yes, you can, after buying a 'Adapter' that SAP sells.
I am not sure if you have already seen some relevant pages and still have this doubt. In any case, I have listed some places where you would find relevant literature.
(1) http://service.sap.com/rkt-solman
In the above link, after supplying your OSS ID and password, you have access to various training documents. One of the links contain SAP Tutor and PDF files on this subject.
(2) For Adapter information, please got to the following link:
http://service.sap.com/upgrade
Click on Product Availability Matrix and then search for Adapter QC in Quick Search for Product Versions box.
You would get a window message that confirms that the Adapter is made available by SAP since 13.03.2008
(3) You also find some more information from 'Online Help' section on Solution Manager
Trust this helps.
Regards,
Srini

Solution Manager and HP Quick Test Connection.

Hello Gurus,
We want to use Solution Manager to make test for our developments, but our corporate tool for this is HP Quick Test.
As far as I know it's possible to connect Solution Manager to HP Quick Test. Does anybody know about it?
Thanks in advance.

Hi,
Are u mentoning about HQ Quality Center? If yes, these documents might help:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Test Management ...
Also check SAP Note 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
Rajeev

RFC Connection Problem between Production Server & Solution Manager

Hi,
I want to make a RFC Connection between Production Server & Solution Manager.
But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
+Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
Thank you.
Edited by: varun@pcl on Jul 31, 2010 4:40 PM

Hi
Mention which Client u login and valid username and password from both PROD Server and Solman .
https://websmp201.sap-ag.de/support under Solman manager .
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Regards

Connection With Solution Manager!!!!

HI all,
01) Could anyone send me docs on How to connect Solution Manager With the ECC 6.0??
02) How to do Issue tracking with solution manager and use as a repository??
Thanks In advance
Regards,
Ami_Eka

Hi,
check following
How to generate EWAu2019s From Satellite Systems:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
SAP Solution Manager service desk:
please refer to the SAP Help Portal (help.sap.com -> SAP Solutions -> SAP Solution Manager -> SAP Solution Manager [current release] [Choose language] -> Service Desk).
https://websmp108.sap-ag.de/~sapdownload/011000358700000509252008E
Maintenance Optimizer:
https://websmp108.sap-ag.de/~sapdownload/011000358700000235502007E
regards,
kaushal
Edited by: kaushal malavia on May 27, 2008 6:12 PM

Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

Hi All,
I have installed Solution Manager 4.0 (OS -Linux ,Database - DB2) .
Now i need to connect solution manager to the R/3 4.6C
Satellite Systems (DEV, QAS ,PRD) for Solution Monitoring
and Service level Reporting .
I have read the configuration guide , but unable to get clear idea .
1) what users (alos type of user -Dialog , Service, Communication etc) do i need create in DEV , and Test in QAS for solution Monitoring .
2) what exact roles /profiles need to be assigned to these users in satellite systems .
3) what users/roles /profiles needs to be done in SOLMAN system
i have applied all the required plug ins and support packs
in satellite systems and solman 40 ..
Please advice . Your response will be a great help for me .
Satish

Hello Satish,
Just clarify, if u have meant connecting the satellite systems for EWA reports to be precise. Early watch Reports. If its is the case, then repond so that i can putin my inputs which may be helpful for you in this config.
Rgds,
Sri

Solution Manager - Error when executing Job SM:EXEC SERVICES

Hi,
I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
The jobs starts but i get an error during is execucion:
Runtime errors         SYNTAX_ERROR
       Occurred on     17.01.2008 at   14:06:28
Syntax error in program "RDSVASAEW_DBMSS____________052 ".
What happened?
The following syntax error occurred in the program
RDSVASAEW_DBMSS____________052 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
Error in ABAP application program.
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
I tried to generate all the function modules and i get this error:
Logical function: MSQ_TEMPDB_DOWNLOAD            :
Error      1 during generation of /1CAGTF/IF_LOGFUNC_000208
Syntax error.
Can you help me on this error?
Best regards,
Nuno Silva

Hi Pedro,
I insert my answer from a similar thread.
As a pitty, that's a well known error.
Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
Basically, these three steps needs to be performed:
1) BDL_DELETE_ALL_TABLES
2) SDCCN - Refresh Service Definitions
3) Generate Logfuncs
SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
OPTION: ALL
It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
-> Activate the Service Data Control Center in the Solution Manager
-> Generate Includes for Service Data Contol Center
With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
Best regards,
Ruediger Stoecker

BI & Solution Manager

Dear Expert,
We are in review of using the BI with solution manager.
I get to know that we have 2 options:
1. to use BI content that come with SAP solution manager (in different client)
2. to connect Solution Manager system to another NetWeaver BI system
Which option is the best, any impact on BI system, performance, system resource?
please advise.
thank you

Hi SH,
thank you for the reply.
Is there any guide that I can refer to setup the BI client in solution manager step by step?
e.g. what to activate in BI client of solution manager, how is the connection suppose to configure, Solution manager as source system for BI client, etc etc.
The SAP Library unfortunately do not contains the technical information that I need.
thank you very much

Connecting solution manager to Hp quality center

Similar Messages

Maybe you are looking for