Connecting sony bravia to home network

Has anyone connected a Sony Bravia TV to their home network so that they can access home photo files, itunes?

Can you please try to put a dollar sign before the password? That works most of the time.

Similar Messages

Ipad will no longer connect to my private home network

i have always had my ipad mini connected to my private home network for over a year and just 3 days ago it no longer connects to my network! Why is that and how can i fix it???
i have no problems with my iphone 4s! it still connects to my wifi!

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

TS1398 My ipad will not connect to other wifi networks. It has connected to my main home network but will not connect to the booster network in my home (it has previously!) It will also not connect to other networks outside my home.

Hi
I just got new router and had to reset my network settings on IPad. Since then, my ipad will connect onto the main home network but will not attach to my extension booster (netgear) which is linked to the home network. It will also not attach to networks outside my home that it has previously worked with. i have reset the settings again, powered off and on again, updated to the latest IOS update, but nothing is working. Please help, as I can only use wifi in a few rooms in my house and i do not have 3G on my my ipad.

Did you try forgetting the network and starting all over again?
Settings>WiFi>Network Name>Tap the blue arrow>Forget this Network. Restart your iPad and then try joining again.
Try rebooting your router. Even though everything else may be connecting to your Network, it might help with the iPad. Unplug the router for about 30 seconds and then plug it in again.
Reset Network settings on the iPad?
Settings>>General>Reset>Reset Network Settings. You will have to start all over again, Tap WiFi in the settings, find your network and enter the password.

TS1398 i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network

IMac won't connect to MBP on home network

I have an iMac and a MacBook Pro at home on the same network. The iMac is connected by ethernet, the MBP by wireless. The MBP can see the iMac under the shared list in Finder. I can select and browse folders. The issue is on the iMac. I can see the MBP but when I try and connect it just hangs. Occasionally I do connect but all the folder I try and browse have a red circles and won't let me access.
I have tried deleting the com.apple.finder.plist file and logging out/logging in on both machines. This did not fix the problem. Any help is appreciated.
Paul

I came on here to post the same - or similar issue.
My iMac G5 sees but fails to connect via airport and home network to my Macbook. Macbook connects to iMac no problem.
I tried connecting them directly via ethernet, same result. iMac sees but fails to connect to Macbook; Macbook connects to iMac.
This has happened before and has worked itself out (although I don't know how).
Yesterday, I did an Onyx clean up and maintenance.

How to connect sony bravia tv wirelessly to internet using apple airport

Hi. I cannot connect my Sony Bravia smart TV wirelessly to internet via my Apple Airport Extreme wireless setup. The TV status is network connection OK, but fails to connect to internet. Apple Laptop connects OK via wireless Can anyone help please.

Hello chowpotluri, thank you for your message. Welcome to SONY Community!
Follow these steps to access the YUPPTV app from the Internet Video menu:
1. Using the supplied remote, press the Home button.
2. Select Internet Video.
NOTE: If the Internet Video option is missing, Select Refresh Internet Content from the Network section of the menu and repeat step one.
3. Select YuppTV.
NOTE: YuppTV requires a device registration. Follow the steps on the screen to register the account. Visit the YuppTVwebsite for account information and answers to usage questions.
Hopefully this post helps you.

Just got a new IPOD Touch and it wont connect to our Wifi home network with a Belken N Router. Our router uses WEP 64 bit security, but had a "blank" password field, which the IPOD did not like. Changing to a 6 char numeric PW didnt help either.

OS is whatever OS ships with current IPOD Touch
I cannot understand why the APPLE engineers have designed this product so that it has SO MANY WIFI problems. This is supposed to be an easy-to-use product. We've had no problems connecting our new laptop, our ROKU box, etc, but it seems impossible to get the IPOD touch to work. NOTHING LIKE SPENDING XMAS MORNING DOING APPLE TECH SUPPORT TROUBLESHOOTING TO LEAVE YOU IN THE CHRISTMAS SPIRIT!!! Argh!
In fact, the only way we have been able to get this expensive brand new IPOD to work on our home network is to DISABLE SECURITY in the router settings. THIS IS ANYTHING BUT A GOOD IDEA.
DON"T KNOW WHY BUT MANY OTHER USERS ARE REPORTING THE SAME KIND OF PROBLEM SO APPLE ENGINEERING NEEDS TO GET BUSY AND FIX THIS PROBLEM SO THAT NEW USERS CAN CONNECT TO THE INTERNET WITHOUT HAVING TO BE TRAINED ROUTER ENGINEERS TO DO IT!!!!
Ok, sorry for the rant, but surely those of you who are experiencing this share my frustration. This is not why I bought an APPLE product.
IS THERE ANY POSSIBILITY THAT APPLE WILL NOT ALLOW A WIFI PASSWORD with more than one identical alphanumeric character? Any ideas? We also tried eliminating the 40 MHZ setting under Bandwidth settings in the router settings for our router, but it made no difference. The router has the latest firmware, too. Running out of ideas, and am ready to box this unit up and send it back!

Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

Can no longer connect to Windows XP Home Network

I recently upgraded to Mavericks and just noticed I can not longer connect to my Windows XP Home Network. Besides sharing files I also print through that network, but it's not just the printer that's afftected. In "Finder" I see the Home>Office Folder but I can't connect to it. I deleted the printer and tried to re-add it but I get a message saying that the server my not exist or is unavailable.
It's been a long time since I set this all up so I don't even know where to look and/or begin.
TIA

There is a problem with connecting to a shared printer on Windows XP from Mavericks. But you should still be able to connect to a shared folder, although my testing was with Windows XP Pro, not Home. One thing you do have to ensure is that the Windows user account has a password. You cannot connect to a shared folder on WinXP if the Windows account has no password.

Connect Fios to Cat5e home network AND Coax connections?

My Verizon fios system was recently installed. My home is wired for a Cat5e home network and standard Coax in all rooms. The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine. Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router. Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both. Any suggestions?
One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal. In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router). Or do I need to get another router from Verizon?

DC_Sox_Fan wrote:
I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections. So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
Depending on how your house is set up this can be accomplished many different ways.
I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
====================================================================================
Error exists between keyboard and chair.

Connecting to windows 7 home network for file and printer sharing

Hi,
I just bought my first Macbook pro (13" 2.66ghz w/ OSX 10.6.4) and it is my first apple product. I was under the impression that it would be able to connect to my home windows network so I could file & printer share. So far I have only been able to connect to the internet wirelessly but have been unable to connect to the home network. All the online help keeps telling me I need to turn on windows sharing but where they tell me to look there is every other type of sharing but windows sharing. Can anyone help?
Adam

On the PC, right click on C: and when the Properties window opens click the Sharing Tab and then check 'Share this drive/folder'
On the Mac open System Preferences/Sharing check File Sharing in the left column then hit the Options button across right, check the third item "Share files and folders using SMB (Windows)"
Then on the Mac Finder Desktop top menu bar select Go/Connect to Server and in the window that pops open enter smb://nameofPC and hit Connect - another window will pop open asking for the username and password of a user on that PC box, once you enter that you'll have the PC appear on your Desktop and can browse it with the Finder.

I'm continuously getting a "connection timeout" on my home network. My iPhone connects without a problem, and I know the password is correct. How do I fix this?

I've never had a problem connecting to my home network until recently. The desktop computer is connected, and my iphone connects as well. It is not a problem with the wireless router, but rather I believe with my computer or airport. How can I fix this?

https://support.mozilla.org/en-US/kb/ask-tb#w_how-to-ask-your-question

Clear net connectivity with time capsule/home network

So Chicago has a new ISP - Clear. It is a wireless provider that boasts download speeds up to 12mbps. I have been using ATT DSL elite pro with time capsule as my wireless hub. I have extended my network via airport express and have two that power speakers/home entertainment system.
I have it up and running and connected directly from their router to my iMac. I would like to attach the motorola wireless router to my current home network that runs between the timecapsule and two airport expresses.
Any help would be appreciated. As well your opinions on choice of wireless ISPs vs home dsl line.
Thanks
Jenn

From your description, it sounds like you could swap the Clear modem and the AT&T modem/router. Power down your entire network for a moment. Then start the Clear modem first and let it run for 3-4 minutes, then start the Time Capsule, then Expresses and computers.
If you get a blinking amber light on the Time Capsule, check your settings as follows using AirPort Utility. It's located as follows: Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup and then click the Internet icon at top of the setup page
At the bottom of the next page, look for the Connection Sharing setting. If I understand the Clear info correctly, you would set this to "Share a public IP address"
I notice that Clear has online tech support, so you make need to refer to them as well. Please post back on your progress.

Can't connect or see me home network, can see/connect to others.

I have a fun one. I can't see or connect to my home network on 3 seperate iphone 3g's.(not 3gS.) I have a laptop, desktop and xbox that connect fine. It was working 4 days ago on this same router with the same settings. my SSID is being broadcast. I have the same security settings I had before, nothing has changed. WEP, channel 11, 802.1 g and b enabled. I can see my nieghbors wireless networks, but not mine at all. I can even connect to one of my neighbors unsecured network if the wind blows right and I get enough bars. I have reset the network settings on one iphone, restarted it, hard reset, complete restore, tried to "find other" networks. Nothing. (My network is on channel 11 because ALL of my neighbors are currently on channel 6 and it causes all my computers to drop due to interference. Worked fine for days on channel 11.)
It's a brand new belkin router. And it was working fine for over a week. And the laptop, desktop, and xbox are still working fine. but none of the iphones in my house (3) can even see the net work on the screen. (And yes, the SSID is being broadcast.)
Has anyone ever seen this issue?

ok. I have a Belkin Wireless N Router. For some reason the settings appear to have become corrupted. I still have no clue why it was able to work with the computers and xbox, but not the iphones. I now have it working.
The solution:
Reset your router back to factory. Then rebuild your network settings, do not "restore" from a file. (Don't know why but it didn't work.) I made sure to connect to the network with the phone after each change and saved the settings on the router each time.
Part of the problem may be with alternate channel settings, after I changed to channel 11 again, (to avoid the competition issue with my neighbors on channel 6) the iphone did lose view of the wireless until I rebooted the router. Make sure your router is connected with a hardline while you make the changes.
All is working now, 3 iphones, 2 computers and an xbox in a pair tree!

After using hotel wifi,cannot connect to internet at home network

after using wifi in the hotels this week, i cannot connect to the internet via my home network. I'm connected to the wifi but, can't connect to the internet.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Lynksys E900 Wireless-N300 Router - Help needed to share internet connection from PC to home network

Hi, I'm hoping someone can help me out with a problem I have:
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?
To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router, although if anyone has any ideas how to do this I'd love to hear!
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE? Any help or suggestions would be greatly appreciated! PS: both PC's are running on Windows 8

I have Cisco Linksys E900 router. I want to make my home Wi-Fi zone. But I don’t have Static IP. One more thing is that Service provider have web page Authentication. I have username and pass.
I am able to make SSID and security for my WI-FI LAN. I can use internet on one device. If I tried from second device again it’s asking me for username and password. While login it’s showing your first session in not logout. (Means I have to logout from 1st device and have to login on 2nd device.)
Is there any option that I can Use my all devices at same time?

Connecting sony bravia to home network

Similar Messages

Maybe you are looking for