Connecting source system in Bi 07
can anyone help to connect the Soure system (mssql) in bi7,
any documents or links please help me.
i tryied to connect but getting error
(When calling a function within the database interface, a return value which cannot be processed by the calling function was provided.)
KARAN.
Hi,
Please find the link which might help you:
http://help.sap.com/saphelp_nw70/helpdata/EN/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Best Regards,
rajani
Similar Messages
-
DB connect source system creation in BI
Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks
Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db -
Not display views/tables on DB connect source system
Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
ThiliniHi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander -
Change a migrated DataSource for DB Connect Source System
Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, MinouschkaHello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick -
Problem in creating DB Connect source system
Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara -
How to create UD Connect Source system and datasources.
I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AMHi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy -
Issue in while connecting Source system
Hi All,
I mistakenly Ran the function module RSAP_BIW_DISCONNECT in BIW, I suppose to run this FM in Source system side,
We observed that Source system in RSA1 (BI) has been deleted), and also one record from the table RSBASIDOC (which is from source connection) has been deleted .
When I try to create he source system in BI, after entering logical system and ALEREMOTE and BWUSER logins, it was asking me to login to source system, after entering the details,
A pop-up message:
RFC destination already exists in source system
Do you want to use this destination, check, or
cancel source system connection?
options: USE, CHECK and Cancel, -> We pressed USE
Then it came back to RSA1 screen and a pop-up message
Connection BA is used in the ERQXXXX
source system as a connection BWQXXXX to BW.
Do you want to delete this connection in the source system?
Connection Is Restored After It Has Been Deleted Successfully
Options: Delete, Do not delete.
When we go for Delete : It is saying that "Error in source system ERQXXXXX"
Thanks in Advance,
TeenaHi,
Please find the link which might help you:
http://help.sap.com/saphelp_nw70/helpdata/EN/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Best Regards,
rajani -
DB Connect Source System Creation
Hi,
I am trying to create source system (DB Connect) to extract data from SQL Server to BI.
I had user id/pwd in DB who is authorised to read view created by DB personnel.
n BW Description of Database Connections Screen
There are two fields
CONN.INFO and PERMANENT
What is the functionality of those 2 fields and from where can i get CONN.INFO
Thanks
KrishnaHi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des. -
Problem While creating DB connect source system to BW
Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
VenkatHi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R -
Error connecting Source System
We are on BI 7.0, just did a system copy of BW production to make a sandbox. Similar activity was done for ECC sandbox. Wehn I do a check on sourcesystem in RSA1. I get below messages.
BI unknown in source system
BI IDoc type ZSBB008 is not the same as source system IDoc type
The following errors occurred in the source system:
Entry in inbound table not found
Entry in outbound table not found
Source system cannot use any of the proposed connection names
I tried to delete the source system, but it doesn't gets deleted and gives below message:
No connection between Warehouse BWXCLNT010 and source system ECXCLNT010
Then I try to recreate the parter functions in WE20 in ECC(source system). When I am making an entry for RSSEND. I am not able to enter the Basic IDoc Type as ZSBB008. It says "Basic IDoc type ZSBB008 not found". I see the table RSBASIDOC has an entry for the source system & BW for this idoc type as active.
Kindly help as to what is wrong?Hi,
Below notes could help you to resolve ur prob..
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184971 Notes on BW source system connections
You can also search in SDN/service.sap ' How to doc... establishing connection betwn BI and ECC.
Thanks, -
Hi,
I am working on BI 7.0 ... I have connected my BI dev client with QA client 630 and have loaded the target. Now the user wants to connect BI dev to another QA client 650 and load the data. Is there any way by which i will have to not create the IP, DTP and Transformation again when connecting to 650. These IP,DTP and Transformation are alread created for source system 630.??? Plz let me know its urgent and imp.
Thanks
PrashantDear
Kindly see the following link
Steps on R/3 Side (Client :230,Dev) :
1. Create user BWALEUSER with usertype as communication and profile : SAP_ALL & SAP_NEW
2. Create Admin ( here we used :Basis) with user type as dialog and profile : SAP_ALL & SAP_NEW
3. Create logical system ZSENDER230 and assign the same to client 230
Steps on BW side ( Client 220,Dev)
4. Create logical system and assign to client ( In our case it was already done by basis during client copy , hence new logical system not created., even though we create and replace in assign client screen, it will throw error in RSA1 screen. Hence not created.)
5. Create BWREMOTE user in spro ( system creates on its own with usertype : system) > BIW>Automated process>create user for b/g processes
6. Also in spro Maintain proposal for R/3 ALE user i.e BWALEUSER
7. Goto SM59 , create RFC connection under R/3 connection with R/3 connecting user as BWALEUSER with RFC destination as ZSENDER230
8. Create source system in RSA1, with Basis as Admin user
Steps on R/3 Side ( Client :230,Dev) :
9. While creating sourcesytem in RSA1 , u will be connected to R/3 and it will take u to SM59 screen on R/3 side
10. RFC destination will be here BW logical system ( step 4) and user for BW login is BWREMOTE
11. Check connection.
shailesh -
Hi,
I am extracting data from oracle data base source system in to BW.
I can see the Table/view in RSDBC transaction .
I can also see data, usually shows 50 data records.
Now when schedule the infopackage it fetches zero records.
I need help with this.
regards,
Rakesh.is DBSL installed??
-- Amit -
Load BW hierarchy from a DB Connect Source System
Hi,
I think I will be able to generate a suitable dataset - the same as for loading BW hierarchies from flatfile - in a database view connected via DB Connect in an external system.
However, it looks like this is not supported. Am I right in thinking you can only load hierchies from flatfile (apart from R/3 of course). Seem odd as it is staged via the PSA anyway.
Can anyone please confirm? Any ideas for workaround as the manual step to create the hierarchy as a flatfile will be a pain.
Regards,
ABHello Andrey,
did you find any solution to your problem?
Regards,
Kai -
Hi Every One,
I am unbale to find the connected source system(ecc 6.0) in visual composer. I have RFC connection between BI 7.0 and Ecc 6.0. Source system column is showing as [None].
could you please tell me how can i configure the connection with my source system.
Thank you,
Regards,
Niru.Hi Niru,
Have you created a
[RFC destination in NW Administrator?|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]. Have you created a [BI System connection?|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
Best regards,
Dharmi
Maybe you are looking for
-
Wireless Printing - HP Laserjet P1006
I have installed the newest HP software package (2.2) and I still cannot print via wireless connection with an Apple Airport. Any suggestions? I am using Snow Leopard. All updates have been installed.
-
How do I open PageMaker 7 files in InDesign CC without buying a previous version of InDesign?
without buying a previous version of InDesign?
-
All media files lost from folder while editing! Entire movie now gone HELP!
After a dozen painstaking hours of editing a movie (iMovie 3.0.3) on my iMac G4 with OS 10.2.8, all of my media files mysteriously vanished from the media folder. The trash is empty both in iMovie and in my desktop trash. Files nowhere to be found. T
-
SORT command in these standard HCM Reports
RHSEMI60, rhssref0, RHVOPOS0 and SAPLRHVL are all standard HR reports. They all initiate a binary search within the code without calling a SORT. (This has something to do with an Oracle upgrade) Do any of you if this has been remediated by SAP yet?
-
How to get iStore template name from jsp filename?
Hi, We have implemented Oracle iStore R12. We have a requirement where we want to get template access name based on jsp file name. e.g. If jsp is ibeCCkdBHdrShip.jsp it should return STORE_CHKOUT_B2B_SHIP_HEADER. Is there any java API available for t