Connecting Srm to Ep

I have installed srm 5.5 and ep 6.0, and want to connect both of them, should i be using XI for the same, if yes could you also provide me with the relevant help to achieve the same.
Thanks in anticipation,
Swetha

Hi,
this blog may help you~
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards,
Moorthy

Similar Messages

Issue connecting SRM 7.01 to a R/3 4.5B back-end

Guys,
I need your help with the following. We are currently trying to connect a SRM 7.01 system to a R/3 4.5B back-end. We almost got everything working except for a small problem, maybe you can help. We are using the classic scenario and are creating purchase orders in the back-end based on a SRM SC.
First question did anyone successfully connected a SRM 7.01 system to a R/3 4.5B back-end?
The problem we are encountering is as follows. In customizing in SRM I have selected system type R/3_4.5B as the back-end system type in u2018define system landscapeu2019.This causes for the determination of driver FM B45A_PO_CREATE when SRM wants to create the PO in the back-end (BBP_PD_SC_TRANSFER ).This action succeeds because the PO is created in the back-end.
However, the next action of BBP_PD_SC_TRANSFER is to read the data again from the back-end via FM B45A_PO_GETDETAIL. This synchronous call is done in order to update the SC status in SRM and create the linkages in BUS2121. This last action fails, because at the time the get detail Bapi is executed by SRM, the EKKO table in the back-end is not yet up to date and error u2018W5 107 purchase order does not existsu2019 is issued by the BAPI_PO_GETDETAIL in te back-end. This causes the SC in SRM to get status I1112 (error in process). Even though this status is issued in SRM, the PO is available in the back-end without any errors if I check this via ME23.
What I see is if I debug the SC transfer process and wait 1 or 2 seconds between the B45A_PO_CREATE and B45A_PO_GETDETAIL. The issue is not there. In this case it appears that the EKKO table is updated on time in the back-end and the B45A_PO_GETDETAIL can be processed in SRM without problems in order to update the SC status. I get status I1113 follow-on document created in this case.
Thus my conclusion is there is a timing issue when connecting to a R/3 4.5B system. Does anyone know a solution. Our thought goes to a small enhancement in the B45A_PO_GETDETAIL FM creating a timer to wait a second before the execution and fetching of the data. I tried it and it worked. But of course I prefer a standard SAP solution. Did anyone experienced similar behavior? Or knows a standard SAP solution to this problem?
Appreciate your help.
Best regards,
Skander

Hi Surender,
The code changes in this note only apply if the system type is u201CERP_Xu2019u201D. This is not the case over here, we are trying to connect to a R/3 4.5B system.
Some additional info, we have multiple back-ends connected. All ECC back-end function correctly and for these we do not have the problem. Only for the very very old R/3 4.5B system.
Any way I tried the note but no luck. This because of the above.
Thx.

How to connect SRM - PI - ERP

Hi experts!
I have to connect the mensionated systems and I haven't experience in those scenarios, I just have experience doing interfaces.
Please. Anybody have a link o something to help me?
Thanks in advance.

SAP provides standard content for integration of SRM and PI that can be downloaded from marketplace. There are many threads available in the forum that can help you.
Re: SRM to PI/XI Integration
SRM And XI Integration
Also, refer to this article for more details.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358?quicklink=index&overridelayout=true
Regards,
Sunil Chandra

How to connect SRM 5.5 server to EP 6.0

Hi,
We have installed Ep and srm separately, can someone please help me with connecting both of them.

hi swetha,
Create an URL iView in Portal with the URL http://<srm host>:<srmport>/sap/bc/gui/sap/its/bbpstart?sap-client=<clientno>
if you dont know the procedure for URL creation , go through https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e4bbf0f9-0701-0010-6a8a-e8b2372f76d0
PS: you dont seem to have gone through the "Rules of engagement" post/topic at the top of this forum.
Arul

WHAT IS THE CONNECTION TYPE FOR SRM

HI
WHAT IS THE CONNECTION TYPE IN SRM RFC DESTINATION.
3-R3 ....ETC.

Hi,
depending on the application to connect to backend SRM system, your connection type may change.
1. If you write Dynpro appliactions to use SRM System, at backend, it'll connect SRM via RFC.
2. If you use ITS to create views of SRM Transactions, then the connection will be Dailog and URL
note 730870 you should find the answer to your question
Also check:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/22/042638488911d189490000e829fbbd/frameset.htm.
Look for TCP/IP RFC destination in it
Reward points
Regards

Tax error while posting an invoice in SRM

We are using SRM 5.5 SP4, ECS and ECC 6.0. We are using vertex for tax caluculation and we configured the tax calculation to always occur in ECC.
One more important point is, client has decided to use invoicing in SRM. Now the problem is we ran in to so many tax related issues and we opened OSS messages for this but SAP did not help. Let me explain the problem in detail.
1) We used to get "Tax jurisdiction code could not be determined" error while creating shopping cart, but we implemented note 436760 and hardcoded a value and got rid of that error.
2) When we create a SC, the copy of PO is created in ECC and vertex is called for tax calculation and tax is calculated properly based on the tax hierarchy except when you use the Shipping Address (external), so when I used the delivery address other than plant, it should calculate based on that address but it was not doing that, its calculating based on the cost object's jurisdiction code. For this problem, we have implemented ME_ADDRESS BADI in ECC, but with this BADI, it is always taking delivery address's jurisdiction code, which is also wrong.
The tax jurisdiction determination should be from 1) Delivery address if its different from plant, else it should look in to the cost object, else storage location then plant.
So we implemented the above logic in that BADI and there is no problem with PO taxes.
3) When we create an invoice with reference to PO, the invoice verification program is always determining the tax jurisdiction code from plant even though the taxes on PO are calculated based on cost object, hence the IDOC is erroring out by saying there is a difference in tax.
So we implemented the user exit and used the same logic of tax determination and its fixed now.
4) Finally, we are trying to create invoices without PO's in SRM, here no tax calculation is happending in SRM, but when we try to post the invoice in to ECC, we are getting the following error
"SAX processing failed on input stream#SAX processing failed when attempting to add child element to parent. (parent element=com.vertexinc.tps.common.domain.LineItem, child element=com.vertexinc.tps.x.."
So I am not sure how to fix this, we are at the dead end now out of ideas, so trying to get some help from experts like you about looking at this problem in a different angle. Now there are a couple of questions I can ask you
1) Did we do something wrong by selecting R/3 as the tax calculation system, if not is it difficult to fix this error and move forward?
2) What if we need to change the design and start calculating the taxes in SRM by connecting SRM to Vertex, will there be any new challenges? and do you have any config doc for this? Also we are implementing this rollout for US, Canada and Mexico companies.
I would really appreciate if you can reply me with your valuable input. You can also email me if @ [email protected]
Thanks a lot,
Sreedhar

Hi
It's recommended to have the same Tax related configuration data replicated in SRM system from R/3 as well.
I don't recommeded you to go with Hard-coding of tax codes.
We have faced similar issues with Delivery address and we have to solve it using our custom logic inside the BBP_DOC_CHANGE_BADI and BBP_CREATE_PO_BACK BADIs.
Anyways, send the detailed business requirements to my mail which are already having with you. )
I will definitely help you out.
Please refer to following threads as well.
sales tax gurus
How to display country related tax codes in SRM
e-Invoice tax calculation.
Tax code T1 does not exist for jurisdiction code error in shopping basket
Drill down facility not working for Tax codes ....Urgent!!!!!
Tax Issue
Tax Calculation
Tax setting in Extended Classic Scenario
Withholding Tax in SRM5.0
IDOCS for Tax Information
Taxes in Bid Invitation
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Error in SRM iView calling https screen from R/3 backend.

Hello All,
I have deployed on SRM Bussiness Package on EP and connected R/3 SRM Server with Ep vis system.
When i check connection test for system it shows connectioin successfull, But when i navigated to one of the Role present in BP and tried to a preview on iView which in turn calling screen from R/3.
That screen is working fine in R/3 that use https:// connection in Bckend and working fine there.
But when i click on iView in Ep it is throwing error .
I have pasted Error Log from NWA under.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Full Message Text
06:15_06/08/09_0093_205774451
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL ':///sap/bc/bsp/sap/srmsus/default.htm' is not valid! Please check the protocol and host entries for system 'SAP_BW'.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks in advance.
Vinit

Hello Sandeep,
Thanks for ur fast reply.
i have navigated to the path you told in SICf but i cant find any node under srmsum .
srmsum is the only node, no subnode in it.
I have deactivated and activated srmsum node i can test it success fully in SICF but it does not have default.htm page in SICf but it does in SE80.
And other thing is regarding SAp_BW system that i am useing is the aliase that i have used for system connecting SRm server SA_BW is just the aliase name and nothing have to do with Bi functionality.
Pls suggest.
Thanks in advance.
Vinit.

Determine linked SRM system in ECC

Hi All,
I need to be able to determine the linked SRM system from ECC in order to call a function module in SRM to return the URL for SRM to ECC to allow a workitem in ECC to contain a link to SRM.
Table BBPC_RFC_DEST seems to hold a link but I've never seen this table used, does anyone know what this table is used for? The config help says:
Definition of RFC Connections for Resource-Related Billing
Use
In this IMG activity, you define which connected SRM Systems are relevant for resource-related billing.
Enter the logical system and the RFC destination.
Requirements
The connected SRM System must be Release 5.0 or higher.
but would populating this table alone activate something else?
Alternatively does anyone else have any other suggestions for retreiving the URL for SRM from ECC other than creating a custom table to hold the information.
Regards
Chris

Hi all,
perhaps I need to clairfy my question.
I know how to find the URL in SRM, my requirement is to be able to work out the URL of the linked SRM system from within ECC.
I have a couple of ideas such as call a function mdoule in SRM to read the user arrtibutes which will give me the URL for system. To do this I need to first determine the RFC destination for the linked SRM system, I think I can do this by populated table BBPC_RFC_DEST in ECC. However I sdon't know if popualtign this table in ECC will have any other implications?
Does anyone know what the implications of populating table BBPC_RFC_DEST in ECC arE?
or does anyone have an alternative soltuion for determining the URL for the linked SRM system from within ECC?
Regards
Chris

SRM MDM Catalog ---- SRM

Hi,
Is there a middleware (Pi) required to connect "SRM MDM" with "SRM" ?
Can anyone explain the integration between these two.
Points will be given
Thanks!

Hi,
In the SRM MDM Catalogue bundle provided from SAP, there are 2 SCA files provided along with the other components. So your basis team need to deploy those SCA files through SDM (Software Deployment Manager) in SRM Portal. The files arovided are for background connectivity of MDM+SRM and the second one is for UI(User Interface) Management. So after deploying the same, your basis team will provide you 1 url which is composite of your server name, port etc.
Paste that URL in Internet Explorer and it will route you to that UI Manager. You should have UI Manager role assigned to your user ID so that you can access the UI. By Default there is 1 user created in MDM as Master with blank password which is used to maintain the UI as it has that role assigned to it.
So when you open that link, it will ask you for server name, password of that server and later User ID of SRM repository and Password. When you login into that, it will show you the configuration done for SRM Portal. There is one button named as OCI (Open Catalogue Interface)mapping. So when you press on that, it will open the OCI mapping sheet where the MDM fields will be mapped to corresponding SRM Portal fields to view the data. By this mean only the connectivity is done for SRM MDM Scenario.
XI is required in only case when you need both the functionalities like you need to use SRM MDM and normal MDM scenario in a single repository. For eg you have one catalogue consisting several materials which are displayed as Catalogue and all the materials which are changed, should be sent to XI to send it further.
Once OCI is done, you need to maintain the webservice in SRM System for accessing the catalogues in MDM directly. For that Masks are created and assigned to that particular user id. In web Service, you need to define the URL, Server Name, Repository Name, Password, Mask etc by which you can automate the process and bifercate the users to access the catalogues related to their country or organisation.
Please let me know in case of any issues.
Regards:
Gaurav

SRM 7 EHP1

Hi All,
we would like to connect SRM 7 EHP1 with ECC6 EHP5 using XI.
extended classic
self service procurement.
Pls guide us connecting SRM with ECC using PI. Any Mapping guide for PI and Config settings for SRM side.
Abdul raheem

HI,
Please download the SRM PI content and this will have all the standard required interfaces and mapping for standard SRM scenarios. Also refer solution manager for documentation.
Self service procuremet doesn't use PI even on SRM7.0
Regards
Sam

SRM and SAP DMS Content server integration.

Hi Sap Gurus,
We are having a requirement to maintain the External documents (relating to Shopping Cart and POs) of SRM in the DMS content server,
is this possible? if so what is the methord that should be used to connect SRM and DMS Content server.
please eloborate.
also we would love to make use of DMS funtionality for maintaining documents in SRM, which i tought is not at all possible as we could not run any of the DMS Transaction in SRM like CV01N /2 /3/ 4, is there any way to integrate DMS and SRM.
Points Awaiting for usefull answers.
Thanks and Kind Regards
Priya S

Hi Priya,
If i understand your question correctly you want to transfer documents which are attached at the shopping cart level in SRM to flow in to ECC at PR or PO level? If that the case following steps require to have documents flow into ECC.
SRM Side:
Implement BADI BBP_CREATE_BE_RQ_NEW (If you are on classic scenario i.e. Shopping cart to PR creation) or BBP_CREATE_BE_PO_NEW (For extended classic) with following code:
cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
ECC Side:
-Create new document type for SRM with T.code DC10. Following parameters need to be set for that
a.     Check Use KPro
b.     Check Version Assignment
c.     Check Change Docs
d.     Assign Internal number range as u201C02u201D and external number range as u201C01u201D
e.     Select Number Exit u201CMCDOKZNRu201D
f.     Version number increment u201C1u201D
g.     File Size u201C10000000u201D
-     Assign following Object links to the new created document type u201CSRMu201D.
a.     Type as u201CSRMu201D
b.     Object as u201CEBANu201D and u201CEKPOu201D respectively
c.     Object description as u201CPurchase req. itemu201D and u201CPurchase order itemu201D respectively
d.     Screen number u201C247u201D for EBAN and u201C248u201D for EKPO.
- Request basis to verify DC30 transaction code that all the necessary document type are allowed to x'fer (i.e. .doc, .xls , .jpg etc)
With this setting we were able to successfully transfer document from SRM side to ECC side.
Thanks
Ritesh

Activate CCMS for SAP SRM with SAP DB

Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful system_failure
Name and Server : SRM - olda8002
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : System Error
Error Message : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server : SRM - olda8002
 DBMRFC Function : DBM_CONNECT
 Error : Communication Error
 Error Message : Error when opening an RFC connection
 4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
Thom

Hello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
 Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
 Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
 dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
 <IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
 SAPDB_DBM SAP DB dbmrfc server
 SAPDB_DBM_DAEMON SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
 Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
 & Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
 Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
 /nsm21 -> check the system errors.
 /nst11 -> check the errors in the corresponding dev log of WP.
 Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina

SRM 5.5 upgrade to SRM 7.0 with MDM

Hi,
Pl consider the following scenario and give your views.
Our client has SRM 5.5 running with SRM MDM 2.0 in their landscape. Now they wish to upgrade to SRM 7.0 without upgrading MDM.(We are upgrading through the parallel landscape).
So during the upgrade phase, we wish to connect SRM 5.5 and SRM 7.0 both to their existing MDM system for testing purpose. Is this possible?
PS : Parallel landscape is existing DEV environment will be copied and then upgrade the copied environment. We plan to copy only SRM Server and want to continue using the existing MDM, PI, Portal and TREX setup.
Regards

Hi,
No issue for testing purpose in test landscape. It is not production usage and production system.
Regards,
Masa

SRM--XI--MDM connetivity

Hi,
I have a requirement of connecting SRM-- XI--MDM system.
All the system is newly configure.
We have a Tcode in SRM system(standard ) and when ever that execute the same data need to be updated in MDM system. When I went through the TCODE program I found that Execute Asynchronous method was implemented inside , and concluded that it will trigger proxy ,and assuming that it ll come to xi through standard interface. But when I tryied to open sproxy there is no entries there.
As I am thinking that same standard interface must be present in xi too and must be visible in sproxy at SRM side.
Please tell why things r not visible in sproxy , I checked following RFC connection is maintained ,
1 RFC to XI of type 3
2 HTTP connection to xi
2 SLDAPICUST
4 LCRSAPRFC
Please tell do we required any more connection. And where I ll get those standard interfaces in xi.. if it is not there do I need to ask basis to install that.(sap BASIS component is there in XI side)
Regards,
navneet

>
navneet sumit wrote:
> hi nanduri..
> thanks for ur reply and this document is realy helpful for me..
>
> but can u just please tell that SRM system data is coming using Proxy so what i am thinking that basic proxy setting is required and we should view the SRM-MDM catalog name space or interface in sproxy TCODE at SRM system.
>
> please correct me if i am wrong. if i dont view these interfaces at SRM side than,is data ll come to xi or not?????
>
>
> thanks and regards
> navneet....
the proxy configuration should be active i.e connectivity from SRM to XI for the proxy framework should be enabled so that the systems can communicate.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies

SRM ERP integration

Hi ,
Can somebody please let me know where I can find manul steps to integration ECC 6.0 into SRM 7.0.
I have checked at market place, it has automated steps guide..
Best Regards,
Tushar.

Dear Thusar,
Looks like this is what you're looking for:
http://help.sap.com/saphelp_nwce711core/helpdata/en/15/710890e69a450ea82f5f4f2fa4d308/frameset.htm
I am going to connect SRM 7.0 (NW7 EHP1) to ERP6 (NW7).
What is the version of SRM and ERP that you integrate? Have you successfully integrate them?
Thank you very much.

Connecting Srm to Ep

Similar Messages

Maybe you are looking for