Connecting/syncing Dell Axim x51v to MacBook

Does anyone know how to sync/connect a Dell Axim that's running Windows Mobile v5.0 to a MacBook that's running Leopeard? I tried doing this with Bluetooth and USB via an application called "The Missing Sync" from MarkSpace and neither of them seem to work. Please help with this if anyone knows how to do it.

I don't think the problem is with Markspace, I think its with the Dell Axim x51v. When I connect the Dell Axim x51v to the MacBook via USB, the MacBook does not even recognize it. When try to connect via Bluetooth, I can create a partnership between the 2, but I cannot transfer files from the Axim to the MacBook even though I have all the intricate settings correct.
Has anyone out there been successful in syncing a Dell Axim x51v to their MacBook?

Similar Messages

Bluetooth connection problems with Dell Axim x51v

I have a Dell Axim x51v and it has Windows Mobile v5.0 on it. I am trying to connect the Axim to my MacBook via Bluetooth, but am experiencing the problem where the devices get paired, but are not connected. Infact, when I add the device, they get connected for about 10 seconds, then they disconnect and remain this way. I do have my MacBook firewall turned off and I enabled Bluetooth sharing. Can anyone help with this?

Does anyone know how to sync a Dell Axim that's running Windows Mobile v5.0 to a MacBook that's running Leopeard? I tried doing this with Bluetooth and USB via an application called "The Missing Sync" from MarkSpace and neither of them seem to work. Please help with this if anyone knows how to do it.

WRT150N to Dell Axim X51V windows mobile 5

Hello, Purchased new Linksys WRT150N. My desktop, my vonage, Dell laptop, and Dell Axim x51v all connected and showing up on my Linksys Easylink Advisor. Everything is working great EXCEPT for Axim handheld running windows mobile 5. According to the Axim's WLAN Utility wireless is on, 150N is connected, signal is good, green bars on front page are up, BUT when I try to access internet I get "Page not found". This is day 3, please help!!
Navchief

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!!

J9 MIDP2 on Dell AXIM x51v

I am trying to run J2ME program on Dell AXIM x51v (on Windows Mobile 5.0)
currently, we tried to use IBM J9 (CLDC1.1/MIDP20) .
I am not able to run a Midlet if it tries to have access to file (read or write).
For example I installed SUN J2ME Wireless ToolKit.
The example PDAPDemo is not running...is there a special configuration for file access?
The same for io access (serial port).
Can anyone help?
Thanks.

Hello,
did you try to access local files or remote ones?
Regards,
Thibaut de Sany. (http://thibaut.desany.eu)
J2SE - J2ME - J2EE certified.

Connecting a Dell 24" to a MacBook Pro

I cannot seem to get my MacBook Pro to display correctly when connected to a Dell 24" monitor. The dell runs at 1920 wide. I can set this on the MacBook when I select Gather Monitors, but there is then no menu. When I select Mirror, the Dell's screen drops down to match the MacBook and shows the desktop - which seems logical when I think about it. But, how do I use the Dell at full resolution as a single monitor? I'm connecting via the DVi to the D-sub as I do not have a spare DVi cable.

The correct proceduce to initiate closed-lid mode:
1.Connect your external monitor.
2.Make you have a USB Keyboard and Mouse connected to your MBP
3.Close the lid and make sure your MBP is in sleep mode(indicator light changing in brightness).
4.Wake your MBP with your USB Keyboard.
After you have done it.......you can open back the lid without affect your display....
Macbook Pro 15.4' Mac OS X (10.4.8) Core 2 Duo 2.16 GHz

Problems connecting a dell u2412m to a macbook pro?

I connected my new MBP to a Dell U2412M that I used on my PC. I used the VGA port on the Display and adapted it to the MBP via DVi port. The display seems connected to the MBP as the cursor works the only pic I get is the screen saver. Any one else have a similar problem?

If you are getting a picture of any kind, your display is working as designed.
The default is to add the second display to an "Extended desktop", and allow the mouse to move across both displays, dragging a window if you wish. Everything in the Arrange pane is moveable, so the displays can be moved in any contiguous orientation to each other and the menuBar can be dragged to either display as well.

Need help connecting Dell U2713HM monitor to MacBook Pro

What is the best way to connect a Dell U2713HM monitor to MacBook Pro OS 10.7.5 to maximize the resolution 2560 x 1440? I was using a VGA adapter on my old Viewsonic monitor that hooked into the Thunderbolt port, I think. When I use my old adapter with the new Dell monitor, it stops my Mac from responding and the monitor says it has no DVI connection. When I unplug the adapter from my Mac, it starts working again. I'm not very good with all these port options and descriptions so talk real slow, please.

1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP
1 DisplayPort 1.2 (DP)
1 High Definition Multimedia Interface (HDMI)
1 Video Graphics Array (VGA)
1 USB 3.0 upstream port
4 USB 3.0 downstream ports
Thank you!

Problems whit Dell Axim x50

Hi..
Im trying to connect my Dell Axim x50 to my new airport Extreme, but for some reason the devise can find the wireless network but the airport never send a message asking for the password, so it never get online. I don't know what to do!
I have been using all types of password, riht i'm using web code!

I have the same problem. The WLAN Utility of the Axim indicates scanning and connecting to network but no connection. I tried this IP addresses [10.0.1.2], have also tried to unlock the Firewall--but no change.
The Wlan Utility is able to recognize different connections but does not go beyond this.
Need help.

How do i connect a dell monitor u2715h to my macbook pro late 2013?

How do I connect a Dell monitor U2715H to my MacBook Pro. The only drivers provided are for Windows.

THanks, James. My daughter suggested I just plug in my new monitor since Macs often don't need as much driver support as Windows machines. Sure enough, that's all I had to do.

I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...

I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP

Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.

Dell AXIM X51 and SunONE Sync

Another somewhat related issue to the last one that I posted... but this time I am simply trying to get my new Dell AXIM X51 to sync with our SunONE calendar. I am not having any luck. The Dell AXIM tells me that the XDNT (I think) program is not supported and to get a new version.
I have done Google searches and not found a new program. I did come across the new SunONE Java Calendar sync, but that did not work for me.
Any suggestions?
John

Great! Is there a Beta of 3.0 available? I am testing the X51 for my techs. Right now it does us no good and we have 20 AXIMs sitting in their boxes waiting for me to deploy. :) If you know where I an get a beta for 3.0 that would be great!
Do you know the name of the new client so after the first of the year I can start searching for it?
John

HP Printer connected to Dell prints junk from my Macbook, lil' help please

Home network w/ HP 832 connected to Dell desktop. When I send a print job to it (wireless connection-not directly connecte), all I get is 3-4 blank pages spit out followed by 5-6 pages of what looks like print code and a bunch of O's and X's. Huge waste of paper.
I'm guessing that I either have it set wrong or the printer is obsolete. The printer works just fine with the Dell.
Help would be appreciated.
Thanks.
John

You need to use a CUPS driver with the CUPS built-in Windows Printing protocol. Check here:
http://www.linux-foundation.org/en/OpenPrinting/macosx

Dell Axim X5 Pocket PC compatibility with Belkin 802.11b PDA card

Hello,
I was recently given a Dell Axim X5 Pocket PC and I'm trying to sync it to my IMAC using my internet connection. I'm running OS X 10.3. Dell's website stipulates that the compact flash card that I need is an 802.11b model. I purchased a Belkin 802.11b Wireless PDA Network Card to satisfy this stipulation, but upon investigation of the software I find that I need to be running at least Windows 98 with Window CE embedded. Is there anyway of me getting around this with my MAC???? To further complicate matters, when I attach the pocket pc to my USB port it isn't even recognized. Is this because it's a Windows device??? Is there any work-around for this?????
Thanks

Prakash,
Thanks for contacting National Instruments. According to hp's website, the 2490 does have a type II slot. Also, if you look at the datasheet for the CF-6004 it states that it is a Type II card. Let us know if you have anymore questions.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

How to sync my iPhone to my MacBook Pro and vice versa as it no longer seems to be doing?

How to sync my iphone to my MacBook Pro and vice versa as it no longer seems to be doing? When I initially set up everything it worked fine; however, now my contacts are not syncing between devices?
I have Icloud and even paid for ectra storage to see if this was the issue but it doesnt seems to be. When I try and view devices on my itunes to sync it will not allow - blank option?
If anyone could please help it would be really appreciated- thanks in advance:)

I don't know how you got to your current position, but you might want to start by replacing your calendar with your MacBook Pro calendar if it is correct (if it isn't, skip this): first disable calendar syncing on your phone (Settings>iCloud>Calendars set to OFF), then prior to syncing open iTunes on your computer and disable automatic syncing (under Preferences>Devices>Disable...from syncing automatically syncing). Next connect your phone and set your sync settings on the Info tab to Syc Calendars with iCal, and below under Advanced choose "Replace Information on this iPhone" and check Calendars. Now sync and this will hopefully replicate your MacBook calendar on your iPhone.
Next, carefully review this to see that you have correctly set up iCloud on both your phone and your MacBook: http://www.apple.com/icloud/setup/, and that your meet the minimum system requirements (latest version of iOS on your phone, latest version of iTunes, OSX Lion 10.7.2 or later).

Can i use iCloud for connecting a mac mini with a macbook?

I want to know if the connection between mac mini and a macbook is possible.
Or do i have to use an i phone as well?

Welcome to the Apple Community.
You can sync calendars, contacts and mail between computers.
Documents requires mobile versions of iWork to work, but If you want to upload documents that aren't for use with iOS devices this User Tip might be of interest.

Connecting/syncing Dell Axim x51v to MacBook

Similar Messages

Maybe you are looking for