Connecting TC directly to my macbook via ethernet cable

Question

Folks,
I've looked at a number of posts on this topic but I must be missing a step because it is not working. Simply want to do file transfer via ethernet.
so... I connect a ethernet cable from the TC to my Macbook - what do I do next?

Answer 1

dpm,
This works for me when I have to temporarily connect the TC to my Mac via ethernet.
*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.
Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
Let us know if this resolves your issue.
Cheers!