Connecting the ipad to a data projector when projector is on the ceiling
I am trying to connect the ipad to a data projector when projector is on the ceiling. I have the VGA cord but it is way to short ...is there another cord to connect the both?
It is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.
Similar Messages
-
actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier. -
Hi,
İ have ipad 2, data projector and VGA connection cable. But when i connect my ipad 2 to data projector, and when i press source bottom to search device, i cnat connect, it search about hour. İs there any configuration or what, what am i missing.
Thanks for your support.
Yasar Maasogluhttp://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
http://learninginhand.com/blog/5-ways-to-show-your-ipad-on-a-projector-screen.ht ml -
I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connector. The iPad will not change from slide sorter mode to presentation mode. How do I change the iPad to 'slide show' and get the projector remote to respond to changing slides?
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
-
When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!
Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable. -
Iv been trying to sync new apps I downloaded on my ipad2 and it isnt syncing. when I connect my ipad to itunes on my PC and click on the APPS tab I can see the apps on the PC but they are greyed out
Do you have restrictions enabled on your iPad? Go to Settings>General>Restrictions and see if you have it turned on. If so - see if you have installing apps turned off. If you do, turn restrictions off on your iPad and that may do it for you.
-
when i connect my ipad 2 to my computer it shows up in the devices list but when i click on it it just says ipad on the screen
If you have a photo program on your computer that can handle image downloading then you might be able to use that : http://support.apple.com/kb/HT4083
-
Is it possible to load pictures from a computer to your ipad. When modified my camera pictures and reordered them, I was unable to load them to the ipad. I could copy but not paste. If I reinstalled them on the memory card, the ipad did not recognize them.
The iPad can be pretty picky.
One way, if you sync your iPad to your computer, is to use iTunes to 'sync' the photos onto the iPad. Of course that has the downside of if you sync them on you have to use iTunes to sync them off.
Or you can download the iCloud control panel and use photostream to put the photos onto your iPad. WHen you install the iCloud panel and enable photo stream it'll put a folder on your computer. Import photos into that folder and they'll go onto your iPad (they do transfer via wifi so it's not exactly an instant thing, might take a few minutes depending on your network and file size.
Or, if you have a few, you can e-mail them to yourself, open that mail on your ipad and save them from there.
Or, to use the camera kit, you can import htem onto your iPad, but the camera connection kit requires a very specific naming protocol. There must be a folder named DCIM on your memory card, and then all files on that card must be in that folder and have a name of 8 characters. If you follow the naming convention, once you plug the memory card in the iPad will see it and allow you to import the photos.
there are also third party photo apps I just dont' have any to recommend.
One more thing to bear in mind, even if you rename the files, the ipad persists in organizing the photos by date, so I'd experiment and make sure it doesn't totally rearrange your files before you spend a lot of time on it. (third party apps may respect the name of the photo and organize it that way rather than by date first, then name) -
I've forgotten my ipad passcode but when I try to restore on the computer it won't let me as I have to turn "find your ipad" off but i don't know how when I can't use the ipad itself. How do I do this on the cloud?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
my iPad is disabled.
i connected it to the iTunes, but the iTunes couldn't access it; because the iPad has a pass code.
i can't enter the pass code in the disabled iPad!
do you have any suggestions?You can unlock it on another computer though the content will be wiped and I think that you need to put it into DFU mode e.g. see post https://discussions.apple.com/message/15385719#15385719 in thread https://discussions.apple.com/message/15385641#15385641 .
From http://support.apple.com/kb/HT1212 :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I am getting ready to order a iPad 3 wifi 4g from USA. I need to take it to India. Will the iPAD 3 work ? And when i pre order do i go with the AT&T since it has the gsm ?
Please let me know.
thanks
KunalI would since it is more global than Verizon. AT&T works in more than 200 countries worldwide. Also talk to AT&T about an International Data Plan for it so your wireless statement will not be as high without it.
-
I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?
P.S running software version 4.3.3I have the same problem on an original iPad.
-
I connected my iPad and iPhone to sync just now and got the message, "The iTunes Library cannot be saved. An unknown error occurred (-54)." What does this mean? I clicked "OK" and the sync appears to have worked properly. Thanks - dalebird (MacBook Pro, g4 17in)
Morning dalebird,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Best of luck,
Mario -
When I try to download a software up date for another program in Binary File (eg. C Cleaner or a Microsoft file) in Firefox they all just come up in the download window as 'Canceled'? When I go to the destination folder the download file icon is there with 0 Kb's for size...Then when I click 'RETRY' the download it appears to download fully, but when I go into the destination folder the downloaded file is not there? I need to know if there is something in the Firefox options to resolve this problem or much more!!
If all .exe files are blocked, antivirus software is most likely configured to block them. See if you can download these with your antivirus and/or security software disabled.
Maybe you are looking for
-
I was having problems with iTunes when i plugged in my iPad as all that came up was 'iPad' i stead of the usual summary and called support and no one knew what to do. I figured put how to sync for now but now it freezes when it gets to step 4. It's h
-
Mac equivalent to PC shortcuts
Hi I've been trying to get use to the keyboard shortcuts I used to use on my PC. For word processing I could hit <ctrl> <arrow right or left> and quickly scroll to the beginning of the next work. Is there a Mac equivalent feature? I could also hit <h
-
Switch on classic GL after upgrade to ECC 6.0
We are in the process of upgrading from 4.6c to ECC 6.0. We intended to use the classic GL for the start and switch to the new GL next year. However we inadvertently failed to switch on the classic settings during install. Is there a way to turn o
-
How to block disturbing websites in safari?
How could I block disturbing websites in safari?
-
Hi How can I find out who has imported a request in Production system? I have created a request in Development system and moved it to import queue of the Production system. there is no automatic import set. But I found somebody have imported my reque