Connecting The SBS 580 5.1 System to My SPDIF connection
Just got this new soundsystem for my laptop but i have a problem, my laptop unly has the SPDIF audio out connection and my sound system has 3 different connectors. (Orange-Sub, Black-Rear, Lime-Front)?So i need to convert these three connectors into my SPDIF.Can i get a connector to convert these ?Do i have to get a reviever with all these hookups ?If so, what shuld i get ?Thanks AlotBiles
Hi Biles, Firstly Have you got a free usb port? If so get yourself a "Creative Sound Blaster Live 24bit". Your minimum system requirements need to be....intel PIII or Celeron class 800MHz or faster processor, MicroSoft Windows xp(sp) or 2000(sp4),128mb ram, 340mb hard Disk space, Available USB. port, CD/DVDrom drive required for software installation ,ok so far , this may or maynot cure your problem,but....... I just bought the same system my self finding only half of my speakers were working. Istarted checking on the cheapest remidy "External soundcard" plugs in play you get a cd installation disk for all other needs (sound adjustments,speaker setups ect) but again hope this helps.
.talk soon . Davey.
Similar Messages
-
Hello! At the beginning I would like to apologize for my English.
Returning to the question, I have a speaker Creative SBS 580 and long ago I broke off the plug. Now, it does not have. but I noticed that the same plug as in mouse (PS/2). Can someone tell me how to connect the cable to the plug? I would add that it is a six pin plug. Which cable connect to which pin?
I cordially greet MatthewHey everybody!
I just got my SBS-580 5.1 system. Since I don't have an external 5.1 card for my laptop, I use it as a 2.1 system, with only front left/right output (green one) plugged. The problem is that the front right satellite is not working properly, at the max volume I can hear it only whispering. I'm just wondering if it's the problem of my soundcard and I need a proper 5.1 sound card to get the full effect or is it the problem of particular system and I should contact the seller I've bought the speakers from? Any help is appreciated!
Thanx! -
Creative SBS-580 5.1 Speakers
Hi, I am looking at getting the Creative SBS-580 5.1 speakers for my computer. I was wondering, how do these connect to the computer? Is it through a single 3.5mm cable, or is it through 3 separate 3.5mm cables?
Hey everybody!
I just got my SBS-580 5.1 system. Since I don't have an external 5.1 card for my laptop, I use it as a 2.1 system, with only front left/right output (green one) plugged. The problem is that the front right satellite is not working properly, at the max volume I can hear it only whispering. I'm just wondering if it's the problem of my soundcard and I need a proper 5.1 sound card to get the full effect or is it the problem of particular system and I should contact the seller I've bought the speakers from? Any help is appreciated!
Thanx! -
I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
ToksHi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard
This is a big thank you to Rys Sinnefeldt who posted this fix.
Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
follow this link
http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
Thanks again to Rys. -
Can't connect to the internet on a wireless system at school, but fine when I'm at home. All semester, there was no problem getting on the wireless system at school. I had a problem, put in my school log-in and password and saved it in keychain. Since, that time I have been unable to connect to the wireless system at school. I delete this action out of "Keychain" and went to "Preferences" and deleted the "Keychain" action, but today at school I couldn't log in. Any suggestions would be appreciated. MacBook; OS 10.5.8
I think your best bet is to go to technical support at your school (hopefully you have one) and they will help you out. The only reason I can come up with as to why you are not getting wireless access is that your settings are wrong (need to turn airport on) or your computer is not registered into the university.
Good luck. -
Not enough sound sockets to insert all three jacks of creative speakers sbs 580
Hi Sir,
Model : Creative SBS 580. 5.1 channel sound.
The speaker system provides three jacks to insert into the CPU sound card. However, I just have one socket in my laptop. Could you please help ?
Thanks
MohitHi Administrator,
Could you please let me know the price of the external sound card mentioned above .. I asked in Staples Bangalore where they quote the price to 4k which is more that the cost of my creative SB 580. Does not seem like a viable investment. Could you please advice here ?
Thanks
Mohit -
A Few Questions About The GTX 580 Twin Frozr/OC in SLI
Hi everyone!
I have a few questions if you guys don't mind answering them, first thing though to make it clear this system is not built yet but the build will start soon.
My first question is whether or not this PSU is capable of running two GTX 580 Twin Frozr/OC in SLI:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139015&Tpk=AX850
+3.3V@25A, +5V@25A, +12V1@70A, [email protected], +5VSB@3A
My second question is whether or not the GTX 580 Twin Frozr/OC will come with a SLI bridge connector long enough to accomplish a connection over this distance:
If not where can I buy a bridge capable of accomplishing this?, the reason for this distance is to keep the bottom card from pushing air onto the top one.
The above is a normal ATX form factor motherboard or to be more specific a ASRock P67 EXTREME6.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157231Quote
EDIT-
I'm looking at the picture right now and it looks like the bridge that comes with the motherboard is not long enough, any suggestions on where to buy one?
nope no idea, ask your reseller
Quote
I didn't mean the Watts I mean the Amps, from other threads in this board it seems that some PSU's aren't up to the task of supplying the card with enough Amps, I was wondering if that PSU could supply enough for both.
Well you can figure from the graph
With one VGA it drains total 447W, where single 580GTX need 40A-42A,
adding second the same VGA to the system drains total 719W
So 719-447=272W, 272W/12=23A, 42A+23A=65A
or simple 719/12=60A
Quote
BTW, I would also like to say I'm currently using a MSI board in my current build and I love it! -
I have moved back from the USA to the UK recently. I brought back with me a SBS 580 speaker system.
Un fortunately i left the power supply in the USA as it is a USA plug.
I need to buy a new UK power supply but i don't have the spec on the old one.
Can anyone help with the spec, i know its 12v AC but i don't know the power output or the plug size.
Any help appreciated.Hi,
Thanks for the reply, however i think you misunderstood me.
I need to know the dimensions of the plug end which goes into the bass speaker.
An electronics store wouldn't know the size as there is nothing to work from to give them and idea. -
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
Error after deploying the application in PI java system
Hi all,
I have created a test web dynpro java application and deployed in PI7.1 java engine. Using the JCO's maintained i hav connected to ECC7.1 system and created a model to call a bapi. After deploying and running the application, I got the following error. Please let me know the solution
Regards
Sagar
500 Internal Server Error SAP NetWeaver Application Server/Java AS
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at com.sap.conn.jco.rt.DefaultDestinationManager.checkProperties(DefaultDestinationManager.java:405)
at com.sap.conn.jco.rt.DefaultDestinationManager.update(DefaultDestinationManager.java:142)
at com.sap.conn.jco.rt.DefaultDestinationManager.searchDestination(DefaultDestinationManager.java:292)
at com.sap.conn.jco.rt.DefaultDestinationManager.getDestinationInstance(DefaultDestinationManager.java:90)
at com.sap.conn.jco.JCoDestinationManager.getDestination(JCoDestinationManager.java:61)
... 82 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB6.3)
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Java Applets enabled
Accessibility mode disabled
Rendering engine: Lightspeed
Inline CSS: enabled
Validate by rendering: enabled
Server
Web Dynpro Runtime vendor: 'sap.com', name: 'tc/wd/webdynpro', location: 'SAP AG', counter: '7.1100.20081021173332.0000', change number: '28470', codeline: NW711_00_REL
J2EE Engine 7.11.3710.27866.20080910102732
System ID (SID) PID
Server Node ID |1698650|16986|Server 00 00_16986|sappidev01.xtium.com/10.255.30.89|SERVER|RUNNING
Java VM SAP Java 64-Bit Server VM, version:5.1.027, vendor: SAP AG
Operating system Windows 2003, version: 5.2, architecture: amd64
Application
Java EE Application (deployable object) demo.sap.com/pegatest
Web Dynpro Application Pegatestappli
Request URI /webdynpro/dispatcher/demo.sap.com/pegatest/Pegatestappli
Version vendor: 'demo.sap.com', name: 'pegatest', location: 'localDevelopment', counter: '20100112141118', change number: 'null'
Session & Other
Session Locale en_US
Session Timezone Pacific Standard Time
Time of Failure Tue Jan 12 00:39:45 PST 2010 (Java Time: 1263285585307)
Session User ClientUser(id=USER.R3_DATASOURCE.J2EE_ADMIN, name=J2EE_ADMIN)
Client Session Id bxuvisJvMVwF2Jn5_M0-ODXALydDRLAhJgFa6xkA_SAP
Client Window Id 09190ac2ff5611dea2480050568315be
Application Session Id 09190ac3ff5611dea70e0050568315be
Web Dynpro Code Generation Infos
demo.sap.com/pegatest
Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session ApplicationSession(id=09190ac3ff5611dea70e0050568315be, name=com.sap.demo.pegatest.pegatestappli.Pegatestappli). The causing exception is nested. RID=09190ac0ff5611deb9b80050568315be
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:680)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:239)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:258)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:457)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.tc.webdynpro.progmodel.context.DictionaryException: InvocationTargetException
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler.getDataType(DictionaryHandler.java:192)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:434)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:978)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:294)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:950)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:954)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:69)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:205)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:552)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1296)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoPreprocessing(AbstractExecutionContextDispatcher.java:146)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppPreprocessing.doService(DispatchHandlerForAppPreprocessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoPreprocessing(ExecutionContextDispatcher.java:100)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:74)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:571)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:602)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:252)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:677)
... 48 more
Caused by: com.sap.dictionary.runtime.DdException: InvocationTargetException
at com.sap.dictionary.runtime.ProviderFactory4J7.getProvider(ProviderFactory4J7.java:36)
at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:96)
at com.sap.dictionary.runtime.DdDictionaryPool.makeDictionary(DdDictionaryPool.java:75)
at com.sap.dictionary.runtime.DdDictionaryPool.makeDictionary(DdDictionaryPool.java:63)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:224)
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler._getScalarType(DictionaryHandler.java:462)
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler.getDataType(DictionaryHandler.java:171)
... 67 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.sap.dictionary.runtime.ProviderFactory4J7.getProvider(ProviderFactory4J7.java:21)
... 73 more
Caused by: com.sap.conn.jco.JCoException: (106) JCO_ERROR_RESOURCE: Destination DEV_ECC6_220_METADATA does not exist
at com.sap.mdi.jco7.Factory.makeException(Factory.java:41)
at com.sap.mdi.jco7.Destination.<init>(Destination.java:35)
at com.sap.mdi.jco7.Destination.make(Destination.java:21)
at com.sap.mdi.jco7.Factory.getDestination(Factory.java:28)
at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:115)
... 78 more
Caused by: com.sap.conn.jco.JCoException: (106) JCO_ERROR_RESOURCE: Destination DEV_ECC6_220_METADATA does not exist
at com.sap.conn.jco.rt.DefaultDestinationManager.update(DefaultDestinationManager.java:163)
at com.sap.conn.jco.rt.DefaultDestinationManager.searchDestination(DefaultDestinationManager.java:292)
at com.sap.conn.jco.rt.DefaultDestinationManager.getDestinationInstance(DefaultDestinationManager.java:90)
at com.sap.conn.jco.JCoDestinationManager.getDestination(JCoDestinationManager.java:61)
at com.sap.mdi.jco7.Destination.<init>(Destination.java:32)
... 81 more
Caused by: java.lang.NullPointerException
at com.sap.conn.jco.rt.DefaultDestinationManager.checkProperties(DefaultDestinationManager.java:405)
at com.sap.conn.jco.rt.DefaultDestinationManager.update(DefaultDestinationManager.java:142)
... 85 moreyes, you are getting Cross Origin Problem .So, you need to disable the web security for chrome.
Go to properties of chrome , and add this after path of chrome.
--disable-web-security
After this restart the chrome.
Please follow the below link for reference.
windows - Is it possible to run Chrome with and without web security at the same time? - Super User
Regards
Sridevi -
None of the changes I make to system preference or the dock will hold after restart. I've cleared the RAM, run disk repair and reinstalled the OS. Now what?
MobileMe closed on July 31, 2012.
It is true that the only way to sync your Mac with iCloud is to upgrad. You need to be running OS X Lion 10.7.2 or higher in order to sync your Mac with iCloud. At this point, you can upgrade directly to OS X Mountain Lion from the version of OS X you are now running (10.6.8). You can purchase and download the Mountain Lion upgrade from the Mac App Store for $19.99. After upgrading you will see iCloud in System Preferences. This guide explains how to sync your Mac with iCloud after upgrading: http://www.apple.com/icloud/setup/mac.html.
Once all your devices are signed into the same iCloud account and you have turned on your iCloud data syncing, you will be able to keep them all in sync using iCloud. You will still have to sync with iTunes to manage your iTunes media such as music, movies, podcasts, etc. You will have the option to either continue backing up automatically with your computer when you sync with iTunes, or to back up your iOS devices automatically to iCloud every 24 hours (as long as they are connected to wifi and your chargers). -
How can I get the information of current BW system id?
How can I get the information of current BW system id '0TCTSYSID' or 'LOGSYS'?
thank your attention!Transaction SCC4 will give you the current logical system you are connected to (double click on the current client).
Regards,
Fred -
What's the safest way to reload system software
What's the safest method to reload system software on an intel iMac? My wife's iMac has been behaving erratically. I have run hardware and virus scans and found no issues. Virus software is Saphos and up to date. Problems began after a brief (5 second) power failure in the neighborhood. My Mac Pro seems fine. Both were on and connected to the internet at the time. I've run a full backup on the iMac so all important files are protected. What next?
Also, your system may have been slow because you installed antivirus software.
DO NOT reinstall Sophos Antivirus.
OS X has it's own built-in software tools to help in detecting or blocking of potential malware.
Some anti-virus solutions can slow down your Mac, but to be honest, the best anit-virus is you, the user and your brain.
Don't visit questionable websites or website you are unsure about.
Don't install pirated software or software downloaded from a questionable or unknown websites or sources.
Java is a vulnerability right now, if you do not need it, don't use it.
Use a browser filter and pop-up blocker
Don't open email attachments from email addresses that you do not recognize.
Install security updates when they become available
Educate yourself as to what threats are common and active.
In effect, use your brain as the AV filter.
Follow that advice and in MOST cases, you will be fine and won't feel the need to have to install antivirus software. -
How to play the music in a HIFI system using bluetooth or WIFI
How to throw music from Sony Xperia Tablet S to another device, I have tried without success to throwthe music to Windows Media Player 11 (in a Windows Vista and in a Windows 7 computer), using DLNA/DRM, and also to Bluetooth. What I want is to listen the music in a HIFI system, without the need to be connected by a cable. Both DLNA/DRM and Bluetooth tecnologies should support this.
I have configured DLNA and I can play in the tablet music that is in the both windows computers, but the next step I am trying is to be free to play the music from the servers in the Xperia tablet using any HIFI system at home.I have found the solution: check "Allow remote control of my player" option is checked in the Streaming menu (Alt + r) of WMP..
Here is the full explanation, I am able now to throw the music from the tablet to the laptop and I will connect the laptop to the HIFI system.
DLNA in Windows 7
I used the Windows Media Player in Windows 7 for initial testing. It does not comply to all DLNA specifications for all components, but it uses the same underlying protocols. It does have a "Play To" feature, which is an implementation of the capability I need.
Windows Media Player (WMP) is easily able to see all of the Media Servers on my network. If you can get to the beginning of the breadcrumb bar near the top of the window, all servers are easily selected. The breadcrumb bar is an easy way to switch between media servers and drill down to get to the media you want to search or browse for. The Search field is the only location in WMP I can easily locate. Just press Control + 1, to switch to Library view, then Control + e, to place you in the Search edit field. Here is a list of WMP keyboard shortcuts I have compiled, Windows Media Player To DLNA Devices in Word .docx format. I have not found easy ways to get to most controls, including the Playlist, other than pressing Tab many times. The exceptions to this are few. The Search results can easily be found just by using the Down Arrow key. Particularly, useful for streaming media around the house are two control accellerators; the Streaming menu (Alt + r) at the top of the window, and the Play to drop down (Alt + t) above the Playlist. It saves a lot of Tabbing around. They only work if in a list, like the Search or Playlist. Strangely, the Alt + t accellerator everywhere else brings up the Tools menu. The Streaming menu is needed to set up permissions of the Player to share media, act as a renderer to other Windows 7 players, set Parental controls, allow / deny devices on the network, and to allow media on this server to be piped out to your computer anywhere on the Internet. To assure that your Media Library is available to others on your home network anytime the computer is turned on, make sure the "Automatically allow others to play my media" option is checked in the Streaming menu (Alt + r). To assure that other devices (Android phone, another Windows 7 / 8 computer, or XBox) can play media on this computer, make sure the "Allow remote control of my player" option is checked in the Streaming menu (Alt + r). Note that Windows Media Player must be open on this computer for other devices to be able to select and Play to this player. The Play To drop down menu lists all devices on your networkk capable of rendering, more simply said Play, the selected media. In most cases, WMP will direct all network traffic and transcode formats to the format accepted by the renderer.
The "Play to" menu above the Playlist in Windows Media Player is also available as an option in the Applications (right click) context menu in Windows Explorer. This is probably one of my most used and favorite Windows 7 features! It displays a submenu of all of the current active DLNA Renderer devices at that moment. If there are none available at this time, the "Play to" feature is not in the context menu.
Maybe you are looking for
-
ITunes Can't Find Podcasts on my iPod Touch
Since I upgraded to OS3.0 on my Touch, I have been unable to keep track of my Podcasts in iTunes (both 8 & 9). This has persisted despite upgrading my Touch to 3.1.1 and iTunes to 9.0.1.8. iTunes only finds 16 podcasts, even though I have 76 - so I c
-
13" MacBook Pro 2009 Spontaneously Shuts Down
For the past few days, my MacBook has been shutting down without warning while plugged in and fully charged. I initially thought it was due to an old battery, since the battery life had been unpredictable enough to cause sudden shut downs at around ~
-
How to find out System Status of WBS Elements?
Hi PS Experts! Please help me on my query. I want to get a list of WBS elements whose status is Released and can be used. If I try to search the table PRPS, it can only help me in finding WBS elements without deletion flag, with RA Key and so on. But
-
We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user) Did a connection test and it was successful! Tried the URL (maybe it needs more): https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest Th
-
Recommended LCD monitor for Mac Minin 1.42
I'm trying to find a LCD monitor in the 20"-22" range for my Mac Mini 1.42 that is known to work out of the box using DVI without having to tweak things (i.e. SwitchResX). I have already purchased and returned a HP w2007. My next choice was a ViewSon