Connecting the Xserve to DMZ port
Hi all,
As a security need I need to connect my web server to a DMZ port on our Firewall router. I was wondering if connecting one 1G port to our internal switch and one to the DMZ port is secure enough or do I have to buy an extra server to service our web hosting?
Thanks,
Ziv
There's not enough information in your post to be able to answer your question.
What is it you're trying to achieve?
What is your definition of 'secure'?
No one can tell you whether you are 'secure enough' until they have some idea of what you're trying to do.
If it's a matter of trying to setup the server to handle requests from external clients on the DMZ net while also serving trusted clients on the internal net, then that's what the two ports are designed to do. However, without knowing what services you're running it's impossible to tell what extra steps (if any) you need to take to secure the system.
Similar Messages
-
I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?
I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!
-
It only flashes white with particles on my tv the laptop is fine. Any ideas?
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W8018AN9ATM
Hardware UUID: 68C79A62-88C1-56D2-97E7-59A9E765F80C
Sudden Motion Sensor:
State: EnabledMost likely one of the following:
Loose or bad connections
Bad cable(s) or plug adapter(s)
Faulty Belkin adapter
Which adapter are you using - miniDP to DVI or miniDP to VGA? If DVI, are you connecting to your TV via DVI or HDMI? Are you using any plug adapters in addition to the Belkin adapter (say, DVI-HDMI plug adapter vs. a DVI-HDMI cable)?
Did this work before? Is this a change in behavior?
Can you try connecting to some other external monitor or TV to test? -
What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?
What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?
If you intend to connect your 2008 display to the new macbook then you will need a USB-C VGA Multiport Adapter ($79) as well as a mini display port to VGA port adapter ($29) and also a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable ($5).
http://store.apple.com/us/product/MJ1L2AM/A/usb-c-vga-multiport-adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
http://www.amazon.com/VGA-VGA-Standard-15-Pin-Male-Cable/dp/B0002AHT0M
The 2008 old cinema analogue Apple Cinema Displays were mostly pre-quipped with a mini display port rather than a VGA or HDMI port. So you will have to connect the mini display port to VGA port adapter to your 2008 ACD and the USB-C VGA Multiport Adapter to your new macbook and connect the two female VGA ports with a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable.
But I can't guarantee though that the above setup will work for your new macbook and your 2008 Apple Cinema Display. You should double check with Apple support regarding my suggestion. Just let me know....... -
Port is down down if I connect the cable and its limited connectivity
Dear All,
I have 4506 with WS-X4648-RJ45V+E. If I connect the cable on one port it is showing down down and on PC it is limited connectivity.
Please suggest.
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Sep-11 20:42 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A12B4, data-base: 0x13F29B60
ROM: 15.0(1r)SG3
Jawa Revision 7, Winter Revision 0x0.0x3
DLD-03-4506 uptime is 10 weeks, 2 days, 2 hours, 47 minutes
System returned to ROM by power-on
Running default software
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP7L-E'
License Level: lanbase Type: Permanent
Next reboot license Level: lanbase
cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.
Processor board ID SPE1625010J
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
2 Virtual Ethernet interfaces
244 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Thank You,
Abhisar.Dear Leo,
TAC has suggested to upgrade IOS because of BUG.
https://tools.cisco.com/bugsearch/bug/CSCsv15915/?reffering_site=dumpcr
Thank You,
Abhisar. -
Quad port Gig-e card for the Xserve?
I've been playing with link aggregation and noticed a couple of PC PCI cards with 4 trunkable ports. They say that drivers exist for Linux and Unix boxes. Does anyone know of one that'll work on an Xserve? We're changing the way we work to all open files (1-3GB) from the server, all 7 of us. I want to illiminate network bottlenecks but with the limited PCI slots in an Xserve I want to maximize each slot. We will all be aggregating our Quad's dual ports to a compatible Gigabit router which will support 8 aggregated groups of up to 8 ports each. I'd like to do 4 ports for the server. Thanks
If i may ask,
Are you using the intel cards sold by small tree comm.? or did you purchase the quad port intel cards as an OEM? I purchased the OEM intel Dual port Pro card, and although the card appears to work fine utilizing single gigabit connections, I have NOT had any luck with LINK AGGREGATION, to our Switch. I DO have The Trunks setup on the switch and I believe the switch side is fine since our Xserve is successfully communicating with the switch as a Link Aggregate using the Built in ports of the xServe. Any info would be helpful, Thanks!
jason -
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
FaeveYou might do better on a forum other than this one, which is "Using iPhone"
-
My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
How to connect the macbook with thunderbolt display 27" to TV with RGB port?
Hi,
I have the following equipments in hands:
1. Macbook PRO 15 inch with 1 thunderbolt port, OS is Mavericks 10.9.2
2. Apple Thunderbolt display 27" identical to this : http://www.apple.com/displays/
3. A Samsung TV with RGB port, & HDMI port.
I want all these displays ( macbook, Apple thunderbolt display & the Samsung Tv) connected at the same time, I had a trial to connect them using a minidispaly adapter to RGB port & HDMI port in the TV but it didnt worked.
Please help!
Thank you.The Thunderbolt dock adds extra ports:
HDMI (up to 2560x1600 with the Elgato, 1920 x 1200 with the CalDigit)
3 USB 3
Ethernet
Audio in
Audio out
You could also use a Belkin Thunderbolt dock.
<http://www.belkin.com/us/p/P-F4U055/>
It includes a FireWire port, but no HDMI port, so would need a Mini DisplayPort to HDMI adapter (1920 x 1200 max) for the TV. This would use the second Thunderbolt port, so the Belkin dock has to be used with the port on the back of the Thunderbolt display, not between the computer and display.
If you don't need the extra ports, use a Thunderbolt hard drive (with two Thunderbolt ports)
<http://www.seagate.com/external-hard-drives/desktop-hard-drives/backup-plus-desk -mac-thunderbolt/>
This can be your Time Machine drive. Connect the Thunderbolt display to the computer, one port of the drive to the port on the back of the display, and a Mini DisplayPort to HDMI adapter to the second Thunderbolt port on the drive.
You will have three displays with differing resolutions, so mirroring is not going to fill each screen at full resolution. -
I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
No. A TB display can only be connected to a TB source.
Confusing Mini DisplayPort with Thunderbolt
As indicated in that artical a displayport device can be connected to a TB source. But that is not your situation. -
My Samsung TV has a USB port. When I connect the cable from the iPad to the TV I can only show Pictures and Music. Why does the videos not appear and how can I show videos on the TV.
This article should help you with that:
http://www.ehow.com/how_7211806_display-iphone-tv.html
Take care -
Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?
jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing? -
Would connecting the HDMI port of my 15 Macbook Pro Retina to the DVI input port on my Dell UltraSharp 2434 LED HD Monitor work?
Hi Wizard0705,
If you have questions about connecting an external display to your MacBook Pro, you may find the following article helpful:
Apple Support: How to use multiple displays with your Mac
http://support.apple.com/kb/HT5019
Regards,
- Brenden -
I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!
You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.
Maybe you are looking for
-
Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista
I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium). Now it does not work at all. It spins but does not read. Device Manager tells me devi
-
Word attachments in Outlook 2013, Protected Mode broken
I have a client using Office 2013 Pro on Windows Server 2008 R2 (Citrix XenApp). When they try to open Word attachments, the file tries to open in Word's Protected View but crashes with the error: "There is insufficient memory or disk space. Word ca
-
I got a replacement Iphone5 from Apple. I went home and tried to synced it with ITunes but said to register as a new device to do update then I can restore old back up, now can't back up old phone info and can't activate my Apple ID for iMessage
-
Problem with File content conversion and parameters
Hi experts, What is the use of file content conversion that is available in file adapter? For what cases we can use it? What do the different content conversion parameters mean? Kindly help Thanks Gopal
-
Magic Packets with AirPort Extreme base station
Ok, so I would like to be able to wake my iMac with magic packets over the internet. It is connected to the internet via an AirPort Extreme base station, and I know that it won't work over wireless networks, but the iMac is connected and gets interne