Connecting to 3G wireless?

Spending a month in the Colorado mountains in a cabin that does have cell phone coverage, but no DSL/Satellite/landline. What product do I need that will allow me to access the web via 3G wireless on my MacBookPro???

What kind of VPN client are you using? You can try the following suggestion for a test.
1) Get into VPN Properties
2) Select "Security" tab
3) Click "Allow these protocols" radio button and check the "Microsoft CHAP Version 2 (MS-CHAP v2)" box
4) Select Networking Tab; select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties"
5) Click "Advanced"
6) Uncheck box for "Use default gateway on remote network"
Niki Han
TechNet Community Support

Similar Messages

Can no longer connect to encripted wireless.

Hello,
I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP. There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.
Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
I look forward to any help.
Thanks,
Martin

First of all, re-download and re-install the latest firmware for your router. After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast. Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router. I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
As a test, turn off all your 2.4 GHz devices and unplug them from the wall. This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc. Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band. See if this makes a difference.
Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption. Please explain. Are you saying that the Windows software was doing the WPA for you?
Update you computers with the latest drivers for your wireless adapters.
As infinityx mentioned, update Windows XP to at least SP2.
It sounds like you may have the Intel Pro Wireless 2200bg card. If so, this card is known to have connection problems. The problems with this card worsened with a recent Windows update, but were fixed with the latest driver. Go to the Intel web site and download and install the latest drivers.
Also, you can try another channel on your router. Since you have a neighbor on 11, try any channel 1 thru 6. (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
Message Edited by toomanydonuts on 03-16-200704:01 AM

My HP OfficeJet Pro 8600 won't connect to my wireless router

This is bizarre. I have had my HP OfficeJet Pro 8600 for about 6 months. It has generally worked fine, and we have used it wirelessly only. But now it refuses to connect to the router. It can FIND the router, and it can find other networks in the area, but it won't connect to the router. I ran the Wireless Network Test, and the results say:
Wireless On - Pass // Wireless Working - Pass //
Network Name (SSID) found - Pass // Wireless Networks Detected - 9
Printer Settings Consistent with Wireless Router Settings - Pass / No Filtering - FAIL //
So it recommends solution as follows: "1 If MAC Address filtering is enabled, and you would like to keep it enabled, you must add the Mac address of your printer to the list of permitted devices for your router before continuing."
Except, guess what, I don't have MAC Address filtering enabled. I wouldn't know how to do that, much less check for it.
Also, before today, this was never a problem. HELP!
Thanks....
If you are interested, here's more detail and background.
Before today, the only problem we have had is that frequently our Apple laptop (OS X 10.6) has trouble connecting to the printer. This has been odd because the printer is connected to the network, and so is the laptop, but the laptop can't find the printer - it thinks the printer is "offline" (even though it's not). Usually, if I wait a while, it will find the printer, and it will resolve itself work fine. If not, we sometimes have found that it can fix itself if you restart the laptop -- restarting the printer does not make a difference. In fact, I did exactly that today, and it resolved itself. And I printed. Fine, right?
But then I wanted to do more printing, and the problem of the laptop not finding the printer came up again, so I decided to really "get to the bottom of this." I don't remember exactly what I did, but somehow I was persuaded by the online help, that the correct solution would be to go into my System Preferences / Print and Fax, and click on the "-", which de-installs the printer, with the idea of re-installing the printer. But then when I tried to re-install the printer, it could not find the printer. Ugh! Wierdly, it found an 8600 Scanner, but not an 8600 printers. After installing and de-installing the 8600 scanner a few times, I eventually deinstalled everything, and I decided to start from scratch. I got my HP disk, and installed all the software again from the beginning (even though it was already there), and then it looked for my printer, but couldn't find it. So then I got a USB cord, and plugged that in.
So, now I have a situation where I do have a working printer via the USB cord, but no wireless connection at all. In particular, since the Office Jet Pro 8600 won't connect to the router, I don't know what else to do. My Apple MacBook pro is 2 feet away from the printer, and it is connected to the router just fine (as is my blackberry), and I have never before had a problem connecting to the wireless router by the printer.
Any suggestions?

There are two things that can trip the mac filtering test to fail: actual MAC address filtering setup (sounds like this is not the case) and using wireless channel 6 or automatic for wireless channel in the wireless network settings (in the router). Since it does show failed for MAC filtering and you do not use this option, try changing the wireless channel in the router to 1 or 11. Those two channels provide the best compatibility with printers due to less interference. Almost everything defaults to auto or 6 for the channel and this causes a lot of interference. This change should not affect anything at all. To do this, you may need to contact the router manufacturer as the process differs from router to router.
What brand and model is the router?
Has anything in the network settings changed at all?
What version is the Mac OS X? There may be additional steps to take as it sounds like there are two separate issues involved and this could be revisited later.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My hp c4599 printer will not connect to my wireless network

My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technical

Hi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

MacBook Pro cannot connect to a wireless network

I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.

OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

How to connect a E1200 wireless router to a machine tool network for wireless communications

Hello all, I am new to the forum, hope someone can help me out. I am wanting to connect my E1200 wireless router to a machine tool in our factory that has programmable controllers and is connected to the machine components via ethernet connections. This is so we can troubleshoot the machine without having a wired laptop. We have several ethernet switches on the machine and a range of IP addresses say from 192.16.1.1 through 192.16.1.150, and 192.16.17.1 through 192.16.17.150, all of the addresses are not used but random addresses in the range. I would like to be able to connect my E1200 to either one of the networks without having to make a change in the router setup. I can make it work on either network but when I switch my cable to the other network it has to be reconfigured. I am currently connecting my data cable to a ethernet port on the router and changing my router address from 192.168.1.1 to 192.16.1.1 and selecting a range of 150 so it will assign numbers as needed. This works great until I change to the other network and I have to change my router address to 192.16.17.1, I know this can be done on some routers because the technicians from the machine builder use them when working on the machines. thanks

On the basic setup tab make the changes shown below:
This basically make the router disappear off the existing networks and turns it into a wireless AP.
Then when you set your laptop's wireless adapter to whatever IP network you want to connect to.
If you need to connect to your router again change the laptop's adapter IP to something like 192.168.200.2
Keep in mind nothing ever gets plugged into the Internet Port on the router.
What I do with these manufacturing machine's is put them on the company network with static IP's. Then so operators can transfer programs and view drawings I place ELO touchscreens at each location. For the Laser cutter operators that do nesting they have a desktop workstation for the CAD software and put the nests on a network share or direct to the laser cutters.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

My ipad nor my iphone will connect to the wireless router, and i have no internet connection

In my previous place I had all my Mac Book, iphone and iPad connected through the wireless router. Now in my new place my macbook is connecting occasionally, and my iphone and ipad are not connecting at all, although in "settings" it looks that they are, but when I open the browser it says "safari cannot open page because it is not connected to the internet" What is wrong?

nandasaboia wrote:
The networks show up, but since I haven't been able to connect, I don't get the "forget this network" option.
Yes, other users are iphone users.
Where the network shows up settings >>>wifi >>>Office network >>>click the small i in a blue circle click and you will find option to forget network

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Upgraded 4s to iOS8 and can't connect to certain wireless networks anymore

I have an iPhone 4s that I updated to iOS 8. Prior to update, I was using iOS 7 (whatever the latest iteration was), and was able to connect to various wireless networks. Following the update, I am no longer able to connect to the wireless network at my place of work. It tries to connect, does so briefly, and give me an authentication request (screenshot attached). Blank username/passwords don't work, neither does the network name/password combo. Choosing cancel will revert the connection back to 3G.
To try and fix the problem, I have "forgotten" the connection, re-started the phone, and neither has worked I have reset my network connections, and it worked immediately after the reset. The phone was inactive for a while, and upon unlocking, it had reverted to 3G. When I tried to re-connect, it gave the same errors already stated.
I no longer have a back-up from before the upgrade, so I can't go back to 7. My wireless connection on my home network is fine. Nothing has changed with the work wireless since it was working with my iOS 7. It uses a WPA-Personal security, and there are several repeaters for the signal throughout the building.
What is going on and how can I fix it?
http://www.pinterest.com/pin/create/extension/

Set it up as new device, make sure all the apps are updated in the iTunes library and try to use iTunes to restore it again from the latest backup:
iOS: How to back up your data and set up your device as a new device

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Using AEBS with non-wireless Mac mini to connect with modem wirelessly

Daughter has a Mac mini w/o wifi on 2nd floor and DSL wifi modem which must be located on 1st floor. Due to other old computer, modem is configured to 64-bit WEP for wireless. Want to add mini to her network. (I've discovered that 40-bit mode on AEBS is really 64-bit mode.)
I'm trying to use a new Airport Extreme Base station by connecting mini to AEBS via Ethernet cable. Then I'm hoping to configure AEBS to connect to the DSL modem wirelessly - don't know if that is possible. I tried setting AEBS to "join a wireless network". It finds the DSL network, so I enter the modem's password. I've then gone through a number of configurations on AEBS but each time, when AEBS restarts, it doesn't get out of yellow blinking light or (on one try if I recall correctly) I got the green light - but then Airport Utility is never able to find AEBS and I end up starting from scratch by resetting AEBS.
1) Can I even use AEBS to connect to a wireless network and have a Mac wired to it so the Mac can reach the Internet?
2) if yes, what wireless mode should I set AEBS to? What other settings do I need to get right?
Thanks

This is a "n" version of AEBS.
Please refer back to the previous posts. I was talking about an AirPort Express (AX) as the device that has this special feature.
Ironically, the less expensive AirPort Express will do what you want with a special feature that allows it to "join" a wireless network and then enable the Ethernet port.
If you have an AirPort Express 802.11n, I will post the steps for you if you want them.

Unable to connect to home wireless network with my iPod touch

I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
Thank you for all suggestions and your help.

I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Connecting to 3G wireless?

Similar Messages

Maybe you are looking for