Connecting to a Mac on a wireless network.

I run Apple Remote Desktop Administrator on my PowerBook. Several of my clients have Macs which connect to the Internet using a wireless router (the router is connected by ethernet to a cable modem). Is there a setting on NetBarrier that would help me connect to the remote computers behind the router? If not, where can I go to figure out how to set up ARD to make this connection? Thanks

Just like any other service that you want to connect to on a host in the internal network, you need to configure port forwarding on the router to allow the connection to get to the host from the outside world.
There are multiple ports you may need to forward, depending on the services you want to access. If you're just looking for screen control, use 5900, but you may also ned 3283 and 5988 for other ARD features.
Apple maintains a list of port numbers for various applications at http://docs.info.apple.com/article.html?artnum=106439

Similar Messages

"Connection Failed" when trying to connect to another Mac on my wireless network.

Hi,
I am having an intermittent problem with the connectivity between my iMac and Mac Pro - the latter is the media server for our house. Occasionally my Apple TV's seem to lose connectivity to the Mac Pro too which is a real pain. Both Macs are running Mavericks and the Apple TVs are running the latest software too.
If I try to connect to the Mac Pro in Finder on my iMac, the Mac Pro is there but when I click on it I get "Connection Failed". Rebooting both computers seems to fix the problem but is far from ideal when mid way through a film!
The messages in console on my iMac when I try to connect to the Mac Pro in Finder is:
14/03/2014 10:20:33.542 sharingd[253]: SDSharePointBrowser::handleOpenCallBack returned -5999
14/03/2014 10:23:34.180 locationd[82]: could not open write stream for /var/db/locationd/clients.plist
I'm not sure if this provides a clue?
Thanks in anticipation,
Rob

I've managed to connect OK using Connect as. So at least that part is solved. I will see if I can get any diagnostics as to why the Apple TV drops out.

Connect Asus Netbook (PC) to Mac Airport Express wireless network

I'm very happy with my PowerBook G4 but recently bought a Asus Netbook as a light weight travel option. Had problems connecting the Netbook to my home AirPort Express system - it's set up as a wireless connection to PowerBook G4.
The Netbook asked for the AirPort password, but then wouldn't accept it. The Apple phone support people tried to be helpful but thought that changing my Wireless Network password would help. It didn't.
Eventually I found a good article that explained the Netbook actually wanted the Mac/Airport WEP key, even though it asked for a 'password'. The article also explained where to find the WEP key on the Mac, and that I had to uncheck the box on the Netbook that says something like 'The key is provided via 802.1x authentication'.
Not sure if I'm allowed to post the address to that article, but will attempt to do so here:
htpp://www.macwindows.com/airportpc.html
Hope this helps someone else.

Hello MacNet2. Welcome to the Apple Discussions!
PCs, like Macs, can access wireless networks that use a number of encryption standards: WEP, WPA, WPA2, 802.1x.
WEP is the oldest standard and is no longer considered secure. Your new Asus should support the newer WPA & WPA2 standards. Both are not only significantly more secure, but are also easy to work with when using mixed OS clients. Both the older 802.11b/g or newer 802.11n version of the AirPort Express Base Station (AX) support all of these standards.
Is there some reason that you wireless network is still using WEP?

Connecting Time Capsule to existing Netgear wireless network

Hi, hope someone can help please?
Have a MacBook Pro and Time Capsule. Want to use TC just for wireless back up with Time Machine. I'm trying to connect it to my existing Netgear wireless network. I've been through the set up process with Airport Utility. It can find the TC on it's own default Apple network, but when I select add to existing network my Netgear network is not showing from the drop down menu (but my neighbours networks are). If I type it in and add it manually the TC restarts but just continues searching for network (flashing amber) and does not connect. I have administrated my Netgear router to allow access to the TC's airport ID and I can't think what else to try.
Can anyone help please?

Hmmm.
There are several IDs for the TC. AirPort IDs and an ethernet or MAC address.
If you have a dual band TC, there are separate AirPort IDs for 2.4 GHz and 5 GHz. I'm not sure if the TC can join another manufacturer's network at 5 GHz, but it should be able to join at 2.4 GHz.
Is that what you entered? If you entered this ID and it does not connect, then try the MAC address of the Time Capsule. I don't have one handy at the moment, but I'm pretty sure the MAC address is on the bottom of the device. The AirPort ID should be there as well.
Message was edited by: Bob Timmons

Connecting a wrt54g to an existing wireless network

Hi,
I'm wondering if it's possible to create a second wireless network by connecting a wrt54g to our existing wireless network?
Our main router is upstairs, connection in the downstairs office is terrible, plus it's being used by a team that would like their own network anyways. Can I plug the wrt54g into the main router, assign it a static external IP and create a second wireless network?
thanks

great thread toomanydoughnuts, thanks! all the hours I spend googling for an answer are such a waste when I can post a specific question and a human being answers me back :-)
I see that what I was trying to do is possible but before I start let me ask your opinion.
My initial goal for a seperate network was to give Router 2 a static external IP and connect our server to router 2 so external users would always be able to access it at the same address in case Router 1 ever had an IP change (I don't have constant access to router 1 and am not supposed to be fiddling with it!)
The secondary goal was to improve the wireless signal for those of us downstairs and I figure having Router 2 down there would provide a nice strong signal.
I have realized now that dyndns can solve my issue with Router 1's IP changing (even if it's once a month it's an issue for remote users accessing our server). Dyndns will re-point our host name to the new IP if it ever changes.
But I still have the issue of a very weak signal in the downstairs office.
Because I'm seeking the simplest, easiest to manage solution as I'm far from a network guru, do you think a better option may be to get a repeater or something like that for our downstairs office to just boost the signal from Router 1? If so, any recommendations?
thanks in advance for your time
Oh, and if I did go the route of setting up Router 2, could I give Router 2 a static external IP address?
Message Edited by tiphanai on 10-06-2009 07:13 AM

How do I connect my printer to a new wireless network?

I currently have a MacBook Pro and HP Photosmart C4580 All-in-one printer. I have had the printer a long time, and have since lost the cable to connect it to my laptop, and any paperwork or cds recieved with it.
I have been unable to figure out how to change my printer's settings so it is connected to my new house's wireless network, the wireless test report showed it is trying to connect to my old one in another town. I have a usb cable I can borrow to hook the printer up to my laptop, but would like to be able to just print wirelessly. Is there any way to do so?

If you want to change your existing connection to a wireless network, follow these instructions.
Open HP Device Manager.
Figure 5: HP Device Manager icon
From the Information and Settings drop-down menu, click Setup Assistant .
The HP Setup Assistant window opens.
Follow the on-screen instructions to change your connection type to an existing wireless network.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

WRT54GC config to connect a wired-printer on existing wireless network

Hello everyone,
I hope someone can help me with the following issue :
- I have an existing wireless network at home, set up with a wireless router/dsl connection
- I now have been given a wired-printer, and I'd like to connect my printer to the existing wireless network, using a WRT54GC device.
I have been trying for a while, and I believe but can't manage to configure the device do this, and didn't find this in the forum yet.
As anyone already done this successfully ?
Thank you

What is the make and model of your printer? What type of connections does it have -- ethernet port? USB port? Parallel port?
If your printer has an ethernet port, you can wire it directly to your router.
If your printer has only a USB port, you will need a printer server such as the Linksys WPS54G, WPSM54G. These devices will allow you to use the printer as a wired or wireless printer. Both of these devices support USB 1.1 and USB 2.0
I do not recommend the Linksys PSUS4 (wired print server with 4 port switch), because it only supports USB 1.1

Trying to connect our exercise bike to our wireless network. It sees the network, but once pass phrase is put in, it won't connect. Any suggestions? We have an Airport Extreme.

I am trying to connect our exercise bike to our wireless network. It sees the network, but once pass phrase is put in, it won't connect. Their tech support said the problem is with the router and we may need to open ports 80, 443 and 4348. We have an AirPort Extreme and I scanned for open ports and found 80 already open but the others are not. Tried using Port Mapping, putting the port number 443 in both the Public UDP and TCP fields and the Private UDP and TCP fields also. The Private IP address defaulted to 10.0.1.201 which is right outside of the DHCP range. Will this be the IP of the bike or should I change it to something else? Are the values I put in the fields totally wrong? Bike is still not connecting. Thanks for any help!

Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

Can't connect my P1102w printer to my wireless network (using Mac OS 10.6)

I have a vanilla home wireless network (D-Link to a cable modem), and a MacMini running OS 10.6.8. My Mac laptop and 4th. Gen iPad work seamlessly. But my hours-long attempt to connect my new HP P1102w to the network has been totally frustrating, despite close study of the pdf documentation, the printer's self-test/Device configuration sheet, browsing this forum, watching a slew of YouTube/HP videos, and following all manner of directions.
The only consolation is the printer works fine on its USB connection.
Here are some issues I've encountered that have stopped me in my tracks:
Carefully following both the pdf instructions and HP's online how-to video, I get through Step 6 w/ no problemn. but then I go to Step 7, which says:
" Under Communication Mode , click Infrastructure , select your network SSID from the Available Network Names (SSID) list, and then click the << button."
Problem is there's nothing of the kind in that window. All I see is a status of the Wireless: enable or disabled (depending on a choice). And even if I try selecting Enabled, it switches right back to Disabled. Aside: I note the printed instructions show a copyright date of 2011. That's ancient history in the CPU world.
Other issues: The only IP address I can find for the printer is the IPv4 address, but that's only for Direct Print Configuration. Is that the IP address I'm looking for?
The printer's hardward address, I assume, is its MAC ? Boy, I could sure use clearer use of language here.
So, needless to add, I'm stuck. It seems it should be THAT hard, but so far nothing I've been able to find on HP support or the forums seems to help. Thanks for any advice you can provide.
PS. I'd hate to have to return this printer because I'm a two decade HP printer lover, but, alas, I may have to if I can't find a solution.
Northwest John
This question was solved.
View Solution.

Hi @Northwest-John,
I see by your post that you are unable to setup the printer on the wireless network. I can help you.
Update the printer's firmware by the USB connection just to make sure that isn't causing any issues with the printer's Embedded Web Server (EWS) not allowing the proper changes. HP LaserJet P1102w Firmware Update Utility.
The newest version is 20130703, which you can compare by printing the configuration page.
Power cycle the router and restart the Mac.
The printer won't recognize the network name if there usually is any symbols or spaces in the network name.
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server (EWS) won't open in other browsers. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
(hold down the x button and when the printer makes a noise let go)
Connect the USB cable from the printer to the Mac.
Go to the Apple, system preferences, print and fax.
Double click on the P1102w.
Open the utility.
Click printer setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
(Click Enable if you have this option)
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box, (changes have been saved) click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click system preferences.
Click the print and fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
Let me know if you are still having issues with filling out the EWS for the printer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New Mac Mini - Existing Wireless Network - Can't Connect

I have an existing wireless network that works fine with an iBook G3. I just hooked up my Mac Mini and it can see the network, but it can't connect. The menu of available networks on the Mac Mini is also much more limited than that of the iBook. Is there an interference issue? If yes, why does the iBook working?
Mac Mini 1.66GHz Intel Core Duo Mac OS X (10.4.8) iBook G3

I see a string of discussions under Mac Mini.

I am struggling to connect my macbook pro to a wireless network. Works fine with USB and my Toshiba can print wirelessly but not the MAC. Any ideas?

Hi
I cant print wirelessly on my Mac pro but can via usb. the Toshiba does work wirelessly..any ideas?

If you can use the wireless network properly (surf the web, check email, etc.) then there is probably nothing wrong with your network settings.
When you print from your Mac Pro, does the printer show up in the Printer list at all (in the Print dialog box)?
If not, have you already tried to Add Printer from the bottom of the Printer list?
If you click Add Printer and it can't see the printer, the next thing to do is probably go to the Toshiba printer web site and see if there is a Mac printer driver to download and install so that it shows up in the Printer list.

Can't connect new macbook to D-Link wireless network

Just purchased a new aluminum 13" macbook last weekend. I have an existing D-Link DIR-655 wireless router with 2 Dell laptops, 2 iPhones, and 1 Sirius Stilleto connected with WAP Personal Security and MAC address filtering working just fine. I added the new macbook's MAC address to the router but the macbook will only connect to the wireless network using WEP (with MAC address filtering), but not WAP (with or without the MAC address filtering on). When I try to connect with WAP I get one of two messages - either "connection failed" or "incorrect password". I've verified the password. Any suggestions?

Contacting your ISP would be the best thing to do. If you haven't already, Apple put out the Airport Update 2008-004 which updates a lot of issues with the aluminum Macbooks wireless. I have the new one also and that update fixed a lot of my problems. But if you are still having a problem you are best calling your internet service provider (ISP).
Hope this helps a little.

Running an Intel Mac on a Wireless Network with other Power PC Macs

I know changing the Airport to WPA encryption will allow an intel Mac with either Mac OS or WinXP OS to access the airport.
If you have powerPC Macs also, what encryption will allow both Mac (intel and powerPC) and WinXP to access the airport?
Right now either WEP for all Macas or WPA for intel Mac (Mac & WinXP).
Help
Mac Mini (Intel), iMac, eMac, iBook, G4, & Powerbook (all powerPC) Mac OS X (10.3.9) also 10.4+

Hi Sherwood!
If I recall correctly, an update to Windows XP (assuming you're using Windows XP) added WPA support to the existing WEP support. The same applies to Mac OS X.
Regardless, if both OSes are up-to-date they can use either WEP or WPA. But WEP and WPA should not be used at the same time for the same wireless network. Choose one and set your Airport first (create your infrastructure) and then set all computers to connect using that same security (add computers to your infrastructure). I suggest using WPA becuase it is more secure than WEP.
This link indicates when you can use WPA on your Mac and this link indicates when you can use WPA on your Windows system.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Can't transfer files from my PC to my new Mac over our wireless network

I have a Linksys WRT54G router connected to a cable modem, which is connected to a desktop PC. I have a Dell laptop connected to the internet wirelessly, and my MacBook Pro is also connected to the internet wirelessly. No problem there, the internet works on both.
However, I'm trying to transfer my files from the Dell to my new MacBook, and I get to the point where it asks for my username and password. I've typed in everything I can think of, and the Mac gives me Error -43, 'something or other is not found'.
I don't remember ever assigning myself a username or password when I set up the wireless network. I've had no problem connecting to the Internet with the Dell laptop, but have never been able to share files or a printer with the desktop PC to which the router is connected.
What's going on here?

However, I'm trying to transfer my files from the Dell to my new MacBook, and I get to the point where it asks for my username and password. I've typed in everything I can think of, and the Mac gives me Error -43, 'something or other is not found'.
That would be the username & password of the user account on the Mac.
(ref: http://www.ifelix.co.uk/tech/3020.html)

Connecting to a Mac on a wireless network.

Similar Messages

Maybe you are looking for