Connecting to a Novell network

I just ordered a 17" MacBook Pro. (It won't arrive for until the middle of May.) At my job, I need to connect to a Novell network. I looked on the Novell web site and there is no client for the Mac. But I have heard that I can connect to anything with a IP address. Is there any way I can
(a) write some kind of batch file that will set up all my shares (there are ten of them).
(b) get my login script to run?
(c) I am planning to use Parallels. If I install the Netware client in Windows, will Leopard be able to see the drives?
Sorry for the "batch file" terminology -- I'm coming from the Windows world.

nerowolfe wrote:
Congrats
Thanks.
At my job, I need to connect to a Novell network.
To paraphrase Bart Simpson who was referring to the internet, "Wow, is that old thing still around?"
We also have some windows servers; somehow I think connecting to them will be easier.
Is there any Linux client SW? Seems Novel would have something Linux available.
Yes. It specifies SuSE Linux. If I was going to get any Linux (not my plan at the moment), it would be Ubuntu.
I did not know it was possible to use Linux software under Unix. Should I feel stupid?
(c) I am planning to use Parallels. If I install the Netware client in Windows, will Leopard be able to see the drives?
Maybe, but if you use BootCamp I am pretty sure it will work since there is no emulation involved. Basically your Mac turns into a Windows Box.
I understand that, but after having read some about Leopard in _Switching to the Mac_, the Missing manual, I am now interested in using the Mac OS. I had originally intended to use the thing only as a Windows box. If I have to boot to Windows to access the network, I would then not be able to take full advantage of the Leopard features I'm interested in. Although I will be installing Office under Windows, I suspect that I might be able to work on some of the documents under Leopard, and also suspect this will be faster. I am also interested in getting a new mail client if I can find one that has search features comparable to Eudora -- which is in many ways obsolescent. (Obviously until I get the machine, I will not really know which ones I want.)
I am not sure how much help that this is, but I am sure that the BootCamp solution will work. Parallels might, and even Leopard on its own stands a chance.
But without the client... ? I will look in the unix forums you recommended.
To be honest, I am now accessing our network without the client because I hate having my login hijacked and it seems to slow down my machine. So I made a batch file that uses Net Use to set up my shares, but I am unable to open certain types of files from my machine that way, so it is really not an ideal situation. In addition, I had to set a static IP address for my ethernet port and can't access the wireless network in the office. I would like to install the client right away so I don't notice the resulting performance degradation.
<script language="javascript">postamble();</script>

Similar Messages

  • Tecra A10 - Refurbished - unable to get it connected to my home network

    I just got this Tecra A10-104 refurbished Laptop...before I take it back I am asking here just in case theres something I have missed as I am unable to get it connected to my home network.
    I am running a Belkin Wireless Router that has 2 main PC's directly connected (LAN), and another PC wirelessly connected.
    This is my router: http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=9238&scid=0
    All PC's working fine and connected.
    Now I'm trying to setup this laptop to connect.
    I uninstalled the Vista Business and ussed the XP Pro Product Recovery disc that came with the Tecra.
    My WiFi card is: Intel(R) Wireless WiFi Link 5100 (Driver Date: 27/04/2008 - Driver Version: 12.0.0.73)
    It sees the network but no matter what i try just won't connect.
    What I have done so far (read before suggesting stuff I have already tried):
    Reconfigured routers WPS to Shared Key system.
    Made sure the wireless adapter has settings set to 20/40hz (auto)
    Restarted router, cable modem & laptop several times
    Wireless button on side of Laptop is ON.
    FN + F8 to enable WIFI (ON) BLUETOOTH (OFF)
    Added wireless network to Auto Connect settings along with SSID and passcode end encryption method.
    Clicked connect when network appears in network viewer dialogue and retyped passcode.
    Not working.
    I should add the Laptop has no problems connecting via its Gigabit LAN port.
    Anything else I'm missing?
    Thanks in advance.
    EDIT: Dual post removed.

    UPDATE:
    The next thing I tried was to reinstall Vista Business from recovery disc to see if this suffered from the same problem.
    The wireless connection worked fine on Vista and, despite the updates that I was being offered, worked without needing to update any drivers.
    This made me think...so the issue is probably XP DRIVER related.
    What I have done now is backup all the driver updates I was told to download by TEMPRO (BIOS & wireless manager updates included).
    I think part of the problem is that TEMPRO only works in Vista (not XP) so you are not informed of any updates that may be required if you downgrade to XP straight after purchase (which is what I did).

  • Deskjet 3050 not connecting to my wifi network

    Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?

    Hi @Rotini 
    A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print 
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My hp c4599 printer will not connect to my wireless network

    My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened. 
    So can someone please help and please dont be too technical

    Hi ..
    Try these support articles  ..
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Mac Basics: Printing in OS X

  • MacBook Pro cannot connect to a wireless network

    I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
    Thanks in advance.

    OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

  • I'm connected to my airport network but can't get online

    2 days ago, i was online and everything was working fine.
    Yesterday, i tried going online and i was told that i was not connected to the internet even though i had full signal bars from my airport. I've restarted my computer a dozen times, checked all my internet connection settings, but nothing worked, i'm still being told that i'm not connected to the internet although internet connect says i am. contrarily, network diagnostics says i am not connected.
    this happened to me once before over the summer. i gave up and didn't use my computer for about a week. when i tried using it again, the internet was just fine. however, i do not have the luxury of waiting a week because my school curriculum requires the use of the internet.
    what's wrong with my computer and how is it that i connected just fine 2 days ago, but cannot since then? please help!
    Message was edited by: kukumuzu
    if relevant, my software versions are as follows:
    Safari 3.1.1
    Internet Connect 1.4.3
    Network Diagnostics 1.0.2

    You might want to update Safari to 3.12. I would empty the safari cache. (Safari>Empty Cache). Then quit Safari. System Preferences>Network>Show:Airport>TCP/IP. Insert the following into the DNS Servers box;
    208.67.222.222
    208.67.220.220
    then hit apply. Now launch Safari. You should also try powering down modem, router and Mac and power up in 2 minute sequence; modem, router, Mac.

  • New 15" MBP will not connect to my wireless network

    This is my first Mac, so I will try to give as much information as possible.
    I have a brand new (got it yesterday) 15" MBP and it refuses to connect to my home wireless network.  It is an older "g" network using a Linksys router and 128bit WEP encryption.  For reference - I have an iPad and 2 iPhones in my household, and those have all connected to the same network without problem, as have the 2 windows laptops that my wife & I use for work so I don't think it's the network.
    Anyway - I fired up the MBP and went through the set up assistant.  When I try to join my wireless network, it detects the network fine.  I select the network and try to connect.  It goes throught the process and then I get a prompt that says "Network conditions have changed".  I click OK and it prompts me to enter the password for the wireless network.  (At this point I have the little exclamation point in the wifi symbol on the top of the screen telling me I have no internet access - which I believe is how it's supposed to look).
    On the password screen, I select "WEP 40/128 Hex" as the password type -  on the security information screen in the router set-up it says "WEP 26 hex 128 bit" as the type, so I believe that's the correct password type for the MBP.  I enter the 26 digit key (the same one that I used to connect the iPad/iPhones) and after trying to connect for a couple minutes I get the "Network conditions have changed" prompt again.  I click OK, and then it tells me it failed to connect to the network.
    I have tried entering the WEP key with a "$" in front of it and entering it with "0x" or "0X" in front of it and the same thing happens.  I've also tried changing the password type to "WEP Password" and entering the password I used in the router to generate the hex key, and the same thing - it tries to connect and then I get the "Network conditions have changed" prompt and it tells me it failed to connect.
    I am at a loss.  I haven't touched the router's settings because everything else I have (Apple and non-Apple products) have all connected just fine - all I've had to do is enter the WEP key and they have connected.
    What am I doing wrong?  Is the MBP somehow different and I need to change something in the router settings?  Any assistance would be greatly appreciated.

    Yeah, BT Hubs do not play well with HP printers, probably because they do not strictly follow wifi standards.
    One thing to try is to change your encryption to WPA ONLY.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Not able to connect to wifi wpa2 networks in lenovo vibe x2

    Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

    Are you trying to connect to a 2.4GHz or a 5GHz network?
    What encryption is your router set to use : AES,TKIP/AES,..?
    Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How to connect my iMac G4 to my network, it wont let me something about the password but I connect to a open network???Ask your question.

    Hello I have been trying to connect my iMac G4 to my network but I can't. I have a secure network with a password and is not let me in but I can connect to an open network with no password??? anybody can help???

    AirPort card in iMac G4 does not support strong WiFi encryption.
    I think WPA is the maximum for that WiFi card.
    If you have WPA2 in your WiFi network, you need to downgrade (not recommended)or wired connect the iMac G4.

  • Ibook G4 having  problem with airport connection when using secure network

    Hi,
    I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
    I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
    Thanks a mil
    Message was edited by: omshanti

    Did you reset the wireless router to see if by default, it has a different
    wireless security then, than however it presently is set up?
    The question you pose appears to be marked "answered or solved."
    When you reinstall an OS X, the setup asks if you have an existing
    wireless connection, or if you will be getting a new one; by default,
    the setup will make the existing one the automatic one for OS X.
    You should not have to add passwords or other, unless there has
    been one set in KeyChain or for the specific wireless base in question.
    Tiger 10.4.x does not require you to have a set password for wi-fi,
    but you will find several levels of secure options available in OS X.
    Not sure why your setup and configuration is problematic. Usually,
    a totally new OS X installation is without issue. Sometimes, you
    may have to administer a base station via Ethernet cable before
    some configurations can use it, but an existing network should be
    easy, unless it already has a password security in place.
    The Mac will work without a password-protected wi-fi internet source;
    often it will 'just work' even when moved to a new environment and
    a neighbor's network, if not password protected, will appear among
    other options in your vicinity and it will be automatically available.
    Not sure if any newer OS X update parts, from the Combo update
    files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
    connect better to whatever wireless source of internet available.
    I've not had that issue, as you state, except for when someone has
    a protected network or passwords in place. Mine has passwords to
    keep unauthorized neighbors from easy access; just in case.
    In remote locations where few neighbors exist who could access wi-fi
    from a lone source, no wireless security settings at all, work just fine.
    I've done that; and found a little greater range was gained in signals.
    And in the city (largest town in state) a computer I'd set up for use in
    a password protected wi-fi network - later worked fine and found the
    new owner's own wi-fi network without issues; and I had let the OSX
    setup assistant do its job. If a local network is protected by WEP or
    WPA2, etc with a password, one would be needed to access it. If not,
    then the connection should be automatic.
    Good luck & happy computing!

  • My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

    My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

    Does the iOS devices connect to other networks?
    Does the iOS devices see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Since both iPhone and iPod stopped connecting I suspect a problem with your network.

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • I have the new ipad retina however i connect it to the wifi at work the signal comes and goes, especially as soon as i use an app that requires wifi, my iphone 4s is connected to the same network with no such problems, why is my ipad giving me these probl

    I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
    I have tried resetting the network settings to no avail
    Does anyone have any suggestions?
    Many thanks in advanced. 

    I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
    I have tried resetting the network settings to no avail
    Does anyone have any suggestions?
    Many thanks in advanced. 

  • Trying to connect B209a to wireless network

    Hi, I have a Photosmart Plus B209a-m All in One  printer.  I successfully connected it to my computer (running Windows XP) via usb cable.  I recently added a router (D-Link DI524) to my computer.  I used the cd that came with the printer to try to get the printer on the wireless network.  This is the error I received:
    The PC and the printer are connected to different networks(192.168.15.0 and 192.168.0.0). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
    I wasn't sure how to fix this problem.  The software did see my network name in the list.  I looked in the paperwork that came with my printer, and managed to print a "Wireless Network Test Report directly from the printer.  This doesn't show any errors.  Any suggestions?
    Thank You!

    152.....?  Are you sure it isn't 192?  Your initial post said 152....
    OK, what happens when you type the printer's IP address into a browser (it should be on the Wireless Test Report)?
    Also, download and run this utility.  I should help us.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Upgraded 4s to iOS8 and can't connect to certain wireless networks anymore

    I have an iPhone 4s that I updated to iOS 8.  Prior to update, I was using iOS 7 (whatever the latest iteration was), and was able to connect to various wireless networks. Following the update, I am no longer able to connect to the wireless network at my place of work.  It tries to connect, does so briefly, and give me an authentication request (screenshot attached). Blank username/passwords don't work, neither does the network name/password combo.  Choosing cancel will revert the connection back to 3G. 
    To try and fix the problem, I have "forgotten" the connection, re-started the phone, and neither has worked I have reset my network connections, and it worked immediately after the reset.  The phone was inactive for a while, and upon unlocking, it had reverted to 3G.  When I tried to re-connect, it gave the same errors already stated.
    I no longer have a back-up from before the upgrade, so I can't go back to 7.  My wireless connection on my home network is fine.  Nothing has changed with the work wireless since it was working with my iOS 7. It uses a WPA-Personal security, and there are several repeaters for the signal throughout the building.
    What is going on and how can I fix it?
    http://www.pinterest.com/pin/create/extension/

    Set it up as new device, make sure all the apps are updated in the iTunes library and try to use iTunes to restore it again from the latest backup:
    iOS: How to back up your data and set up your device as a new device

Maybe you are looking for