Connecting to a Windows Network with Cisco AnyConnect

Okay so I am beyond stumped here and hope you can help. So I am able to connect to my companies VPN using Cisco AnyConnect with no problem. The network admin can see me in, and I can even access Web based resources. My problem comes when I am trying to ping the domain controller and our DNS server and cannot. In addition when I go to use RDC to connect to our Terminal Server no love.
No for the very weird part. When I do a traceroute to the TS server by name I am getting DNS resolution. So it appears that I am able to hit the DNS server, but not able to ping it for some reason. I have tried everything I can think of short of binding my computer to the network. Any ideas are very welcomed!!!!
Thank you all in advance,
Mike

I am assuming that the windows and Mac appear on the same subnet of your local LAN?
If the PC's are having difficulty finding the Mac and the Mac has a static IP, I would add that listing to your local "hosts" file, the entry would go below your local IP found in that file such as:
127.0.0.1
192.168.1.5 maciscool (where maciscool=NETBIOS name you entered in the Advanced section of Network under WINS), and/or under "Sharing" at the top box entitled "Computer Name:", if it doesn't work with maciscool.local, try removing the ".local" from the computer name. Older versions of whenders had difficulty with upper/lower case machine names, if it is currently lower case, make it UPPERcase.
The local hosts file used to be found under c:\window\system32\drivers\etc, have no ideal where they hid it under Vista but probably the same place.
Windows should search local "hosts" file before going to WINS, before going to DNS, since you most likely don't have a Windows domain with a WINS server it won't look there and of course it won't find computers on your local LAN via DNS, so by adding those to your local hosts it acts as a mini DNS server to resolve machine names and addresses.

Similar Messages

  • Connecting iMac to Windows network with domain

    i tried to connect my new iMac to the windows network at the office.  it would not find the server.  any suggestions

    johnthompson1993 wrote:
    Hi,
    To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
    The encryption should be configured automatically. To use the proxy:
    1. Open System Preferences
    2. Click on Network
    3. Select Airport from the list on the left
    4. Click on Advanced, near the bottom right
    5. One of the tabs will be called Proxy. Configure your settings there.

  • RDC to Windows 7 with Cisco Anyconnect Secure Mobility Client

    Hi
    RDC works perfect as long as I dont start a VPN connection. When that happens RDC is closed down.
    Anyone with ideas to fix this?
    Rgds

    Hi,
    Are you trying to remote connect with IP address or hostname?
    Please try alternatively way and see the result.  It might happens that there are some block setting applied during VPN connection. Is the firewall is properly configured with required port enable during VPN connection. Please check related configuration
    and other setting with below article.
    http://windows.microsoft.com/en-in/windows7/why-can-t-i-connect-using-remote-desktop-connection
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

    I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

    Try:
    - Powering off and then back on your router.
    - Anything else here
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • FAX through HP laser jet 3050 which is connected on a Windows Network. I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

    HOW can i sent FAX through HP laser jet 3050 which is connected on a Windows Network.
    I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

    Welcome to Apple Support Communities.
    Apparently there is no HP software support for the HP 3050 fax or scan functions with OS X 'Lion' 10.7:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A1
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c0292511 4
    Alternatives?
    1) Run a Windows client on the Mac using Boot Camp or one of the available virtualization programs like Parallels, VMware Fusion, and others so you can run the latest Windows print/fax/scan driver.
    2) If your Mac hardware supports an older OS X version, downgrade to one (Snow Leopard?) that still had support for print, fax and scan.
    3) Buy a newer printer. A 2007 model is 5+ years old, and should now be fully depreciated in a business.

  • Connecting to my Windows Network

    Hello everyone. I recently purchased a new 24" iMac, and I'm having trouble connecting to my windows network, and my printer. My Windows Vista Home Premium is connected directly to a router, and my printer (HP Officejet J5780) is connected directly to the computer, so I route through the computer to print from the rest of my house. However, on my iMac, the network itself never pops up. I set the workgroup on the iMac to be exactly the same as the Windows, but I still can't see the network. Does anyone know how to fix this? Thanks!

    Hello!
    I've just bought an iMac....
    If it's a brand new machine, you should be in this forum area:
    http://discussions.apple.com/category.jspa?categoryID=189
    as you've found the forums for much older iMAcs with G4 processors
    or you can also ask in the Leopard OS Networking sub-forum here:
    http://discussions.apple.com/forum.jspa?forumID=1222
    If your iMac is an older model, then post the model details and we can go from there.
    A

  • Settings to connect to office windows network using wifi

    Hi there,
    I'm trying to connect my MacBook to the office network using Wifi - it's a full windows network with the usual active directory, fileservers and exchange. I can connect using LAN and can get to the network folders and exchanges etc, But I can't work out what settings need to be changed on the Wifi adapter to go wireless. Had a try searching for the answer but no luck.
    I've tried setting up a new user on the Mac with the same name as my network login. Attempted to change the DNS settings to be the network IP and changed the workgroup name under the WINS tab (although that seems to always change back to WORKGROUP automatically). And of course use my network password when asked for a WEP password when trying to connect. It doesn't ask for a username when connecting to the network wifi - just a WEP password.
    Can anyone explain what settings I need to change on the Macs Wifi adapter?
    And what details will need from my PC to get it going e.g. IP address, workgroup etc.
    Not much of a clue with networking. So please speak slowly!
    Thanks for the help,
    Mike

    All you should need is to verify that the correct IP ports - 3283 and 5900, primarily - are open on any applicable routers, and if necessary forwarded to the internal IP address of the Mac mini. Then just set up the Remote Management settings (Sharing system preference) on the Mini and add the mini to the Computers list in ARD.
    Regards.

  • Can't connect to a wifi network with a wep keyid 2

    Hi,
    how do you connect to a wifi network with wep but the keyid is 2, i can't find an option.
    i put the password, in asci and in hexa, and the answer "can't connect to the network" a xp near got connected after changing the key id in configs :((
    did i miss something?
    thanks for help

    I am relatively new to Mac's, as at 40 having had IBM/Windows compatibles since I was 14 (8086 woot!), I am still learning.
    However, I believe the answer is that you must use Key 1. I don't believe OSX offers the chance to use any others. However, in case I am wrong, try putting a $ before the WEP passphrase, but again, I think it only uses Key 1.
    Hope that helps,
    Jesrael
    Macbook 1.8 Core 2 Duo   Mac OS X (10.4.9)   2GB Ram

  • X220: Connected to a 4G network with 21Mbit/sec - A pleasant surprise!

    Yesterday i was at a meeting, where i normally is connected to 3G WAN with 7.2Mbit/sec. - i started the connection as i normally do, but discovered that i connected to a 4G network with 21Mbit/sec.  I didn't even know that the WAN card in my X220 was able to do that.  So i tested the connection immediately and i could download with 1.5Mbyte/sec. effectively.
    It was a pleasant surprise!
    Moderator Note: Edited subject to match content.
    /Henrik - Denmark
    X220 - i7-2620, 8GB, 128GB Samsung 830 SSD (I just LOVE my X220!)
    Solved!
    Go to Solution.

    It seems your modem works at full speed for the 3G networks - HSDPA mode, 14.4 Mbps (Cat 10) downlink speed. Try upload and measure the speed. May be you'll get in the HSUPA mode up to 5.76 Mbps (Cat 6) uplink speed.
    At the same time you see 21 Mbit/sec in the connection status window... Very interesting.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • I can not connect the wi-fi network with my iPad Air

    I can not connect the wi-fi network with my iPad Air

    Hi there maurobats,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Browse windows networks with Thunar

    Hi,
    I am running xfce on arch linux, everything up to date I believe. I would like to be able to browse windows networks with the file manager (Thunar). I do not need to share files or even access password protected content. I am simply looking to be able to browse public folders. (Without having to mount anything manually)
    I found some instructions for installing samba and fusesmb, but then found a note saying fusesmb doesn't work anymore. A search on that showed that most people seem to be using gigolo now, but there is no wiki page for it, and being a noob I am hesitant to try to mess with it on my own.
    If someone could give me very precise instructions on how to do this (samba/gigolo or otherwise, I don't care about the method as long as it's not terribly difficult) I would be very grateful. Thanks!

    Ok, I installed samba and smbnetfs and everything looks good, the workgroup shows up in the file manager now. However...
    None of the windows computers show up.
    I installed exactly as the wiki said, using gamin and smbnetfs but not SWAT. I changed the workgroup to the correct name. Some other setting I might have missed that it needs?

  • HP Wireless Printers cannot connect to WPA2-secured WiFi networks with Cisco/Meraki WAPs

    In the last two months, I've had the displeasure of working with two very different HP printers and attempting to make them work on a WPA2-secured wireless network.  All attempts to authenticate fail with "invalid phassphrase". 
    I'm not the first person to encounter this, it's a problem with many different HP wireless printers (I just happen to have physical access to the OfficeJet Pro 8610 & Deskjet 3511). 
    My equipment is a Cisco ASA 5505 Firewall running ASA 9.1x & Cisco Aironet 1142 running IOS 15.3.x. 
    What does work on the WPA2/AES SSID:  Apple MacBook Air running OSX 10.10.2, Three Windows-Based laptops running Windows 8.1 Update 1, an iPhone 5s, Three Windows Phone 8.1 devices, Roku 2, PlayStation 4, PlayStation 3, Sharp Aquos TV, Amazon Streaming Stick, and an Android Tablet (Jellybean).  Basically, everything. 
    What does not work on the WPA2 network:  OfficeJet Pro 8610 & Deskjet 3511.
    To test the theory there is a problem with HP's implementation of WPA2 with regard to Cisco Aironet IOS, I built out a second SSID that only works in WPA/TKIP mode.  This solution works.  Both HP printers will join the WPA/TKIP network.
    So, I'm able to demonstrate there is a certain connectivity issue.  When i look at AAA Debug on the WAP's console, I can observe the HPs attempt to authenticate "Bind I/F" on the WPA2 SSID, however they do not achieve authentication and do not pass the AAA phase.  However, on the WPA SSID, they bind and authenticate successfully. 
    To help illustrate this, here is my WAP running config.  It's about as simple as it can get.  There is no relevant MAC filtering or ACLs bound to any interface.  Noting that I have an ACL on remote access to the WAP (i.e. Locked down to SSH, disabling telnet).  The main point being that the ASA firewall is not a factor in this problem as the issue is at the WAP before WPA2 authentication can complete, therefore the printers never reach the network / when the printers connect to the WPA network, the operate fully & correctly. 
    If anyone at HP can indicate why this particular config is somehow improper or broken, that would be fantastic.  There should be no reason why Cisco / Meraki WAP owners have to lower wireless encryption standards just for a printer, be forced into wired, create separate SSIDs with lower encryption specifically for a device. 
    Building configuration...
    Current configuration : 6064 bytes
    ! Last configuration change at 12:46:47 UTC Fri Aug 20 1993 by admin
    version 15.3
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname 10-10-50-1
    logging buffered 1024768
    logging rate-limit console 9
    aaa new-model
    aaa authentication login default local
    aaa authorization exec default local
    aaa session-id common
    no ip source-route
    no ip cef
    ip domain name freedom.local
    dot11 syslog
    dot11 vlan-name inside vlan 50
    dot11 vlan-name inside-wpa-only vlan 70
    dot11 ssid inside
       vlan 50
       band-select
       authentication open
       authentication key-management wpa version 2
       mbssid guest-mode
       wpa-psk ascii 7 xxxxxx
       information-element ssidl
    dot11 ssid inside-wpa-only
       vlan 70
       band-select
       authentication open
       authentication key-management wpa
       mbssid guest-mode
       wpa-psk ascii 7 xxxxxx
       information-element ssidl
    dot11 band-select parameters
       cycle-count 3
       cycle-threshold 200
       expire-supression 20
       expire-dual-band 60
       client-rssi 75
    dot11 wpa handshake timeout 500
    dot11 network-map
    username ADMIN privilege 15 secret 5 xxxxxx
    ip ssh version 2
    bridge irb
    interface Dot11Radio0
     no ip address
     no ip route-cache
     encryption vlan 50 mode ciphers aes-ccm
     encryption vlan 70 mode ciphers aes-ccm tkip
     ssid inside
     ssid inside-wpa-only
     antenna gain 0
     mbssid
     speed  basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
     channel 2412
     station-role root
     l2-filter bridge-group-acl
    interface Dot11Radio0.50
     encapsulation dot1Q 50 native
     no ip route-cache
     bridge-group 1
     bridge-group 1 subscriber-loop-control
     bridge-group 1 spanning-disabled
     bridge-group 1 block-unknown-source
     no bridge-group 1 source-learning
     no bridge-group 1 unicast-flooding
    interface Dot11Radio0.70
     encapsulation dot1Q 70
     no ip route-cache
     bridge-group 70
     bridge-group 70 subscriber-loop-control
     bridge-group 70 input-address-list 700
     bridge-group 70 output-address-list 700
     bridge-group 70 spanning-disabled
     bridge-group 70 block-unknown-source
     no bridge-group 70 source-learning
     no bridge-group 70 unicast-flooding
    interface GigabitEthernet0
     no ip address
     no ip route-cache
     duplex auto
     speed auto
    interface GigabitEthernet0.50
     encapsulation dot1Q 50 native
     no ip route-cache
     bridge-group 1
     bridge-group 1 spanning-disabled
     no bridge-group 1 source-learning
    interface GigabitEthernet0.70
     encapsulation dot1Q 70
     no ip route-cache
     bridge-group 70
     bridge-group 70 spanning-disabled
     no bridge-group 70 source-learning
    interface BVI1
     mac-address xxxx.xxxx.xxxx
     ip address 10.10.50.1 255.255.255.0
     no ip route-cache
    ip forward-protocol nd
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip route 0.0.0.0 0.0.0.0 10.10.50.2
    logging history size 100
    access-list 111 permit tcp any any neq telnet
    bridge 1 route ip
    line con 0
     access-class 111 in
    line vty 0 4
     access-class 111 in
     length 0
     transport input ssh
    line vty 5 15
     access-class 111 in
     transport input ssh
    end

    I get the same behavior with a laserjet m451nw. I need to enable tkip to get the printer working, it doesn't support pure aes-ccm (every other device here supports pure aes-ccm, even cheap ones), although it's advertised as working.
    The following snippet of config works, but I still think it should work without the tkip "hack".
    dot11 ssid whatever
    vlan 1
    band-select
    authentication open
    authentication key-management wpa version 2
    interface Dot11Radio0
    encryption vlan 1 mode ciphers aes-ccm tkip

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • Trouble with Cisco Anyconnect VPN Client

    Hello,
    our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciated

    you may want to try the OS X networking forums:
    http://discussions.apple.com/forum.jspa?forumID=733

  • Setting up IPsec VPNs to use with Cisco Anyconnect

    So I've been having trouble setting up vpns on our ASA 5510. I would like to use IPsec VPNs so that we don't have to worry about licensing issues, but from what I've read you can do this with and still use Cisco Anyconnect. My knowledge on how to set up VPNs especially in iOS verion 8.4 is limited so I've been using a combination of command line and ASDM.
    I'm finally able to connect from a remote location but once I connect, nothing else works. From what I've read, you can use IPsec for client-to-lan connections. I've been using a preshared key for this. Documentation is limited on what should happen after you connect? Shouldn't I be able to access computers that are local to the vpn connection? I'm trying to set this up from work. If I VPN from home, shouldn't I be able to access all resources at work? I think because I've used the command line as well as ASDM I've confused some of the configuration. Plus I think some of the default policies are confusing me too. So I probably need a lot of help. Below is my current configuration with IP address altered and stuff that is completely non-related to vpns removed.
    NOTE: We are still testing this ASA and it isn't in production.
    Any help you can give me is much appreciated.
    ASA Version 8.4(2)
    hostname ASA
    domain-name domain.com
    interface Ethernet0/0
    nameif inside
    security-level 100
    ip address 192.168.0.1 255.255.255.0
    interface Ethernet0/1
    nameif outside
    security-level 0
    ip address 50.1.1.225 255.255.255.0
    interface Ethernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface Ethernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    no nameif
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    boot system disk0:/asa842-k8.bin
    ftp mode passive
    dns domain-lookup outside
    dns server-group DefaultDNS
    same-security-traffic permit intra-interface
    object network NETWORK_OBJ_192.168.0.224_27
    subnet 192.168.0.224 255.255.255.224
    object-group service VPN
    service-object esp
    service-object tcp destination eq ssh
    service-object tcp destination eq https
    service-object udp destination eq 443
    service-object udp destination eq isakmp
    access-list ips extended permit ip any any
    ip local pool VPNPool 192.168.0.225-192.168.0.250 mask 255.255.255.0
    no failover
    failover timeout -1
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-645.bin
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 no-proxy-arp route-lookup
    object network LAN
    nat (inside,outside) dynamic interface
    access-group outside_in in interface outside
    route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
    sysopt noproxyarp inside
    sysopt noproxyarp outside
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ca trustpoint ASDM_TrustPoint0
    enrollment self
    subject-name CN=ASA
    crl configure
    crypto ca server
    shutdown
    crypto ca certificate chain ASDM_TrustPoint0
    certificate d2c18c4e
        308201f3 3082015c a0030201 020204d2 c18c4e30 0d06092a 864886f7 0d010105
        0500303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
        f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
        6f6d301e 170d3131 31303036 31393133 31365a17 0d323131 30303331 39313331
        365a303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
        f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
        6f6d3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100b2
        8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
        37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
        234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c51782
        3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
        03010001 300d0609 2a864886 f70d0101 05050003 8181009d d2d4228d 381112a1
        cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
        18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
        beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
        af72e31f a1c4a892 d0acc618 888b53d1 9b888669 70e398
      quit
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside client-services port 443
    crypto ikev2 remote-access trustpoint ASDM_TrustPoint0
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 65535
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 10
    console timeout 0
    management-access inside
    ssl trust-point ASDM_TrustPoint0 outside
    webvpn
    enable outside
    anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
    anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
    anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
    anyconnect profiles VPN disk0:/devpn.xml
    anyconnect enable
    tunnel-group-list enable
    group-policy VPN internal
    group-policy VPN attributes
    wins-server value 50.1.1.17 50.1.1.18
    dns-server value 50.1.1.17 50.1.1.18
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client
    default-domain value digitalextremes.com
    webvpn
      anyconnect profiles value VPN type user
      always-on-vpn profile-setting
    username administrator password xxxxxxxxx encrypted privilege 15
    username VPN1 password xxxxxxxxx encrypted
    tunnel-group VPN type remote-access
    tunnel-group VPN general-attributes
    address-pool (inside) VPNPool
    address-pool VPNPool
    authorization-server-group LOCAL
    default-group-policy VPN
    tunnel-group VPN webvpn-attributes
    group-alias VPN enable
    tunnel-group VPN ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    class-map ips
    match access-list ips
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
      inspect http
    class ips
      ips inline fail-open
    class class-default
      user-statistics accounting

    Hi Marvin, thanks for the quick reply.
    It appears that we don't have Anyconnect Essentials.
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has an ASA 5510 Security Plus license.
    So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license?

Maybe you are looking for