Connecting to Airport Extreme w/ Time Capsule

How can I connect a MacBook Pro to an Airport Extreme w/ Time Capsule?
The computer does not have an ethernet connection.
I would like to perform the first backup to Time Capsule with the computer physically connect to the Airport Extreme.

You'll need Thunderbolt to Gigabit Ethernet Adapter - Apple Store (U.S.)

Similar Messages

Connection of airport extreme mit time capsule

How can i connect a aiportextreme with my time capsule?

Please check out the following Apple Support article to see how you can use your AirPort Extreme with the Time Capsule.

Connect Apple Airport Extreme or Time Capsule to Actiontec MI424-WR Rev. E

I have a Mac mini & a Macbook Pro. I want to bridge the Apple router with the FIOS router. I read in another forum that if the two routers are bridged then I won't be able to use the TV or phone. Needless to say, I don't want that to happen. I want to be able to bridge the two routers and still be able to watch TV & use the phone.
So, how do I bridge the two routers & keep everything else unchanged?
Please explain in layman's terms & step-by-step.

Can I use my wireless or an extra router along with the Verizon provided router

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

What is the best long range wireless router, airport extreme or time capsule? Or?

I need a wireless router that will reach 350--400 feet with a strong enough signal to use Netflix. This will be line of site in a rural area reaching from one trailer to another. Both trailers run on 12volt solar systems but trailer A has an inverter to convert to 120volts for a wireless router. Trailer B only has 12volt power so the Internet signal must come exclusively from the wireless router in Trailer A. There is no electricity available for booster wireless routers in between the two trailers.
We don't need all of the bells and whistles like being able to connect to printers etc. This is just about sending out a strong enough signal to watch Netflix. Which is more powerful for this purpose? Airport Extreme or Time Capsule? If neither of those is strong enough, what is?
Thanks,
SV

The issue you are really facing is the long distance (at the WiFi frequencies) you have to travel. The Extreme has a radiated power of 23 dBm, nominal, which can reach 50-150 feet depending on you you are talking to...and that is measured in a closed test chamber at ideal air temperature and humidity, no obstructions. In the real world that signal will be attenuated significantly just by the air alone, assuming completely obstacle free path, and subject to interference from other sources in the area, such as cell phones and cordless phones, and microwave ovens.
The AirPort units have enclosed antennas that cannot be connected with an external gain antenna. So you are stuck with what is in the box.
Other products, commercial, do use external antennas so you may want to do some research in that area.
Keep in mind that the 802.11n protocol uses two frequency bands, 2.4 GHz and 5 GHz. Signal attenuation increases rapidly as a function of frequency. You will get much less distance if you use the 5 GHz band, so it would be best to restrict operation to 2.4 GHz.
Now, another aspect, at 2.4 GHz you are in the Ultra High Frequency portion of the spectrum...exposure to radio frequency energy at high power should not be considered a safe or desirable thing in the UHF range. Most communication specialialists try to minimize exposure at these frequencies. The reason for saying this is you will need significantly greater radiated power than the Extreme can deliver to reach 400 feet. You might want to do some searches on health effects of the RF energy you will be transmitting.
So, bottom-line, I have difficulty encouraging using wireless tranmission at the WiFi frequencies for the distance you need.

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

How can I tell if my computer (2x2.26 Quad Core Xeon MAC Pro) and my Airport Base station(Airport Extreme 1Tb Time Capsule) are Gigabit compatible?

How can I tell if my computer (2x2.26 Quad Core Xeon
c Pro) and my Airport Base station(Airport Extreme 1Tb Time Capsule) are Gigabit compatible? I want to add a Cisco switch to the network.
Thansk
Tony Breuer

All Mac Pro's ever made have shipped with gigabit ethernet. The last non-gigabit tower desktop Apple made was the very first generation PowerMac G4's back in 1999.
Similarly, all Time Capsules have been gigabit ethernet as well - never been one that was not.

Replacing older airport extreme with time capsule

I am thinking of replacing my airport extreme with time capsule. I had a lot of problems setting up airport extreme a few years ago - now it is very reliable. I don't want to have the same issues with time capsule. Can I simply physically replace the airport extreme with time capsule using the same settings as previously
Advice gratefully anticipated

Welcome to the discussion area, pancuronium!
You will use AirPort Utility on your Mac for this operation:
(Macintosh HD > Applications > Utilities > AirPort Utility)
Open AirPort Utility and click Manual Setup
Click the File menu at the upper left corner of the screen near the Apple icon
Click Export Configuration File
Assign a name to the file and save it to a convenient location like the desktop
When you are ready to install the Time Capsule....
Open AirPort Utility and click Manual Setup
Click the File Menu
Select Import Configuration File
Navigate to locate the file that you exported to import all the settings into a new configuration for the Time Capsule
Message was edited by: Bob Timmons

Trouble to use Airport Extreme and Time capsule

Hello,
I need help to solve a problem.
I'm using Time capsule and I try to install Airport Extreme to extend my network and to connect a USB printer. Time capsule is working perfectly and Internet works. But here are the troubles.
When I install Airport Extreme, I write my network password and after a reboot, Airport light turns green and can be seen in airport utility. But it doesn't keep on going.
When I want to check my configuration, airport extreme can't be reached. Printer doesn't works. Once I open again airport utility, airport extreme is not present in the left panel anymore.
Thank you for your help.

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

Iphone printing via airport express, airport extreme or time capsule

I see lots of info about air print. What I don't understand is why I cannot print something from my iphone via an airport express or time capsule connected printer. Makes no sense. What is the workaround here? Is the only solution to buy an air print enabled printer?
My current setup is time capsule--2 iphones, 2 Macbook Pros, 1 ipad. One airport express (extending the network of my TC) . The airport express has my printer connected to it.
What the heck? Couldnt Steve fix this before he went to the light?

Hi,
From my own experience - iPhone 3GS X2, iPad 2 all running iOS 4.3.5 to a MacMini running Snow Leopard 10.6.7 - AirPrint Activator works like a charm. It's awesome. But my shiny new iPhone 4S ( running iOS 5 ) refuses to see any printers. I have reinstalled AirPrint Acitvator ( as per their web site ), to no avail. I have tried connecting my printers directly to my AirPort Extreme to see if my 4S would see a network printer. But no joy. DONT UPGRADE TO iOS 5 if printing is important to you!!
Steve

Connecting a StoreJet Cloud to Airport Extreme or Time Capsule

The Transcend StoreJet Cloud is a wireless mobile storage device for use with things such as an iPad or iPhone. It is possible to set it up in a bridged mode (think "pass through"!) so that when an iPad is connected to its network the Internet can stil be accessed. I've had this working successfully with it bridging to D-Link and Huawei 3G Mi-Fi wireless routers but won't play ball at all with either of my Apple units - an Airport Extreme BS and a Time Capsule.
The AEBS & TC are running in bridged mode connected to a trio of Netgear routers that are specially configured to run in a bonded mode using a Sharedband service. One of the Netgears provides DHCP services for the network. NAT is disabled, a requirement in the way they are configured. The TC runs in wireles n mode only for newer stuff in the house with the AEBS running in b/g/n mode for compatibility with older devices.
As the StoreJet uses wireless n I have attempted connecting to both the AEBS and TC. In both cases Airport utility reports that the StoreJet is a connected client (correct MAC address) BUT I am unable to use any Internet services in this "pass through" mode when the iAd is connected to the StoreJet. Airport Utility reports that the StoreJet connection is Excellent but the Data Rate only ever shows as 1 Mb/s with a RSSI of -52 dBm. I am unable to check whether the StoreJet has been assigned an ip address as it is not possible to interrogate it for that and the Netgear router only lists ip addresses given to connected wired clients.
I did try taking the AEBS out of bridged mode and ran the DHCP services from the instead of on the NetGear but still could not make things work. I'm waiting for a response from Transcend Support but thought I'd also post this issue here in case anyone can shed some light on it or provide suggestions of anything else I can try. There clearly seems to be some conflict with my particular Apple setup.

Some more information on this issue:
I managed to pick up another (brand new) wireless router from a local Cash Converters store this morning very cheaply (5GBP!). Its a Netgear DGN1000. I configured this as a wireless access point only, bridged to my main router. Initially I had some problems, similar to my Apple devices, connecting the StoreJet Cloud through it in bridged mode using WPA2. After I switched the Storejet to use WPA rather than WPA2 (the NetGear is configured to mixed WPA/WPA2 mode) I got a successful connection.
I then tried setting my 2 Apple devices to try to emulate this, i.e. use mixed WPA/WPA2 mode + connect the StoreJet using WPA. This did not, however, work.
Seems there may be 2 issues to look at here - connecting via Apple devices + connecting in WPA2 mode.
The bottom line for me is that at least I have a wireless router in the house that the StoreJet will now work with and it cost me next to nothing. Of course, I'd rather be running it via one of my Apple devices so as I don't have to be running yet another wireless network.
If anyone else has, or is considering acquiring one of these handy StoreJet units, I hope my experiences are helpful to them :-)

Connecting to Airport Extreme w/ Time Capsule

Similar Messages

Maybe you are looking for