Connecting to an LCD HDTV: DVI to HDMI male or female?

Unwilling to plunk down $40 at Best Buy I bought a cable advertised on eBay for $2 described as HDMI male to DVI male. However, when I got it, it turned out to be DVI male to HDMI FEMALE.
I want to be able to use my LCD HDTV (46" Sharp Aquos, 1080p, if it matters) as a monitor, hopefully to even and edit text using my wireless keyboard and mouse.
Do I have the right cable?

you'll need a male DVI to male HDMI To connect to your HDTV. You'll find good cable prices at monoprice.com , only place I buy cables. My mini is hooked up to my Aquos too and it looks great.

Similar Messages

Cannot Connect Imac 24" via mini dvi to HDMi adapter cable to Sony Bravia 3

Hello Everyone,
I'm having the worst time in trying to connect the following:
1. Imac 24" 3.06 dual with dvi connection
2. Mini dvi to HDMI adapter (this mac with this connection was produced only for a short while!).
3. 10' (foor) HDMI wire
3. Sony Bravia 32" model KDL32L-5000 with 3 HDML connections
i.When I wire everything up, I keep getting"no signal" on my Sony Bravia TV.
ii. It doesn't matter whether I connect the HDMI wire to HDMI 1,2, or 3 on my Sony
iii. On my Imac Hard Drive>>Applications>>System Preferences>>Displays
all I get is a list of different resolutions. There is no mention or mirrors etc.
Nothing happens when I press "Gather Windows" or Detect Displays"
Can someone out there please help!!!!!
Can you also give any solution in very simple and small detailed steps!
Thanks,
Stacey Bindman
Montreal

Majortrout, there is a major disconnect going on here.
1. You are showing an Ebay link with a mini-DVI to HDMI adapter.
2. You report that you have an Early '09 24" iMac.
3. That iMac does not have a mini-DVI port. That iMac has a mini-DispayPort.
4. You need a mini-DisplayPort to HDMI adapter.
It is physically impossible to attach the adapter to which you link at Ebay to your iMac. So you need to take a step back and figure out what you really have; which iMac, which adapter, etc.
Dah•veed

Is the apple mini DVI to DVI 'D' and 'Male' or 'Female'

Hi all,
New to DVI and HDMI... So excuse me if this is an obvious question...
I plan to buy the Apple mini-DVI to DVI cable. My lcd tv only has HDMI... I believe a female input.
I plan to buy a third party DVI to HDMI cable. The one I am looking at is a Male DVI-D to Male HDMI cable.
Will the DVI at the end of the Apple cable work with the DVI-D Male third party cable?
Many thanks.
Regards,
Alan

Just about anywhere has DVI to HDMI cables. The HDMI will plug into your TV with a male end from the cable to the female of the TV. The Mini DVI adapter will plug into you MacBook with a male end to the female of the MB. The cable you have (the DVI to HDMI) should have a male end (the one with the prongs) which is inserted into the Mini DVI to DVI cable you get from Apple.

HDTV won't display as mirror or extra display via mini-dvi to HDMI

Hi
I have a MacBook running 10.5.7 connected to a 1080P-capable Toshishba TV (model 42XV555). I also tried this with 10.5.6 with same results.
They are connected via a "shuttlez" mini-dvi to hdmi dongle and then via a "wegi" hdmi to hmdi cable.
The TV has three HDMI inputs, one designated for computer input via HDMI with a separate input for analogue sound.
THE MB recognizes the TV and displays a separate Toshiba-specific control panel with display control panel is up. It defaults to 1600x90 and 60Hz. The Macbook adjusts every time the tv is connected - there is communication - flashing screen, MB screen re-adjusts.
S-video works fine, via mini-dvi to s-video donglr, then svideo cable.
It has worked twice with the MB and connected with HDMI - just twice. I have spent hour after hour tweaking resolutions, re-booting, changing cables, HDMI ports on the TV etc! When it worked I could mirror and use the screen as a separate, larger display. It worked in clam-shell mode too.
My question is - are there any know problems getting this combination to work (ie MB, mini-dvi to HDMI)? It can work but I am missing some knowledge on the exact combination required.
What are the optimum settings to have this TV display HD from the MB, or come to that any HD 1080p-capable TV??

I'm attempting to connect my MB to a plasma 50 inch Panasonic TV, and am about to purchase the necessary cables from www.monoprice.com.
I've discovered so far that the HDMI connection directly between the MB and the TV (using the appropriate mini DVI adapter of course - product # 4852 at monochrome.com and an Apple HDMI cable which I'll return to get a better price at monochrome) transmits only video/pictures but not audio.
So far, an old, short RCA (red/white) 2-way audio test cable (again using the appropriate adapter to connect to the headphone jack on the MB) does not transmit audio directly to the TV.
1) Could audio be transmitted from the MB to the TV using a "Coax (RCA) to Optical Toslink Digital Audio Converter" (product ID # 2947 at www.monochrome.com) to connect directly to the TV (in which case, what digital audio cable would I need to connect the converter to the TV)? And if so, would it be stereo or mono?
OR...
2) Should I wait until I get my Onkyo surround sound system (later this week) to see if the RCA cable will transmit directly from the MB to the sound system?
Thanks.

Best way- p7-1380t dvi to hdmi connections to a monitor HP w2207h

Have 2 DVI outputs from computer - current hookup using DVI to VGA. Want to hook up DVI to HDMI. Are there any advantages? and, best way to do it?
This question was solved.
View Solution.

GDicker, welcome to the forum.
Here is an explanation of both connection types:
DVI to HDMI
DVI is a digital signal in the same format as the video portion of HDMI. The difference is that DVI doesn't carry the audio signal like HDMI does. This means that if you are only using the video signal you can use a simple DVI to HDMI plug adapter that changes the physical connections. If you want to go from a DVI source with audio, you'll need an active converter to combine the video signal from the DVI source and the audio into the HDMI signal.
As you can see, DVI is a digital video signal and HDMII is a digital video and audio connection. Simply using a DVI to HDMI adapter is only going to give you digital video. Therefore, the advantage of the DVI to HDMI will be to give you a digital signal. VGA is an analog connection.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MSI NX8600GT able to do DVI TO HDMI for PC to TV?

I wanted a Video card could hook up and would look nice on my TV, this card can connect by S-video and I've tested it and it works pretty darn good.
My question is, since it has 2 dvi connections, is able to do DVI to HDMI instead of S-vid to S-vid for the TV.
Or if I wanted to do HDMI to HDMI, I would need a diff card, any recommendations?
Thanks all,
MSI K9N Neo-F V.3 (BIOS 2.1 I think)
AMD Athlon 64 X2 4000+ Brisbane 2.1GHz 2 x 512KB L2 Cache Socket AM2
Seagate Barracuda 250GB 7200 RPM 16MB Cache SATA 3GIG
MSI GeForce 8600GT 256MB 128-bit GDDR3 PCI Express x16
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel
TDK Indi DVD 840G (IDE)
CHIEFTEC ATX-601AE Purple Steel ATX Mid Tower (using old case & stock fans)
Antec TPQ-850 ATX12V / EPS12V 850W Power Supply 100 +3.3V@25A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,
+12V4@18A,[email protected],[email protected] +12V4@18A,[email protected],[email protected]
Acer AL2016WBbd Black 20" 5ms Widescreen
Windows XP PRO SP2

Kreg,
This is the pinout of the different DVI Connectors:
The DVI connector usually contains pins to pass the DVI-native digital video signals. In the case of dual-link systems, additional pins are provided for the second set of data signals.
As well as digital signals, the DVI connector includes pins providing the same analog signals found on a VGA connector, allowing a VGA monitor to be connected with a simple plug adapter. This feature was included in order to make DVI universal, as it allows either type of monitor (analog or digital) to be operated from the same connector.
The DVI connector on a device is therefore given one of three names, depending on which signals it implements:
DVI-D (digital only)
DVI-A (analog only)
DVI-I (integrated, digital & analog)
The connector also includes provision for a second data link for high resolution displays, though many devices do not implement this. In those that do, the connector is sometimes referred to as DVI-DL (dual link).
The long flat pin on a DVI-I connector is wider than the same pin on a DVI-D connector, so it is not possible to connect a male DVI-I to a female DVI-D by removing the 4 analog pins. It is possible, however, to connect a male DVI-D cable to a female DVI-I connector. Many flat screen LCD monitors have only the DVI-D connection so that a DVI-D male to DVI-D male cable will suffice when connecting the monitor to a computer's DVI-I female connector.
DVI is the only widespread video standard that includes analog and digital transmission options in the same connector.[citation needed] Competing standards are exclusively digital: these include a system using low-voltage differential signaling (LVDS), known by its proprietary names FPD (for Flat-Panel Display) Link and FLATLINK; and its successors, the LVDS Display Interface (LDI) and OpenLDI.
Some new DVD players, TV sets (including HDTV sets) and video projectors have DVI/HDCP connectors; these are physically the same as DVI connectors but transmit an encrypted signal using the HDCP protocol for copy protection. Computers with DVI video connectors can use many DVI-equipped HDTV sets as a display; however, due to Digital Rights Management, it is not clear whether such systems will eventually be able to play protected content, as the link is not encrypted.
Specifications
Digital
Minimum clock frequency: 21.76 MHz
Maximum clock frequency in single link mode: Capped at 165 MHz (3.7 Gbit/s)
Maximum clock frequency in dual link mode: Limited only by cable quality (more than 7.4 Gbit/s)
Pixels per clock cycle: 1 (single link) or 2 (dual link)
Bits per pixel: 24
Example display modes (single link):
HDTV (1920 × 1080) @ 60 Hz with 5% LCD blanking (131 MHz)
UXGA (1600 × 1200) @ 60 Hz with GTF blanking (161 MHz)
WUXGA (1920 × 1200) @ 60 Hz (154 MHz)
SXGA (1280 × 1024) @ 85 Hz with GTF blanking (159 MHz)
WXGA+ (1440 x 900) @ 60 Hz (107 MHz)
WQUXGA (3840 × 2400) @ 17 Hz (164 MHz)
Example display modes (dual link):
QXGA (2048 × 1536) @ 75 Hz with GTF blanking (2×170 MHz)
HDTV (1920 × 1080) @ 85 Hz with GTF blanking (2×126 MHz)
WQXGA (2560 × 1600) @ 60 Hz with GTF blanking (2x174 MHz) (30" Apple, Dell, HP, Quinux, and Samsung LCDs)
WQUXGA (3840 × 2400) @ 33 Hz with GTF blanking (2x159 MHz)
GTF (General Timing Formula) is a VESA standard which can easily be calculated with the Linux gtf utility.
Analog
RGB bandwidth: 400 MHz at -3 dB
Take Care,
Richard

Mac mini, macbook + DVI to HDMI + projector = No soup for you!

This is driving me nuts!!! I have tried 3 different macs, 4 completely different cables/adapters and they all do exactly the same thing.
1. I connect the mac to the DVI to HDMI cable and/or adapter combo, then connect to the projector
2. I get 2-30 seconds of wonderful projector screen usage (it works, picture looks crystal clear)
3. Then POOF! No projector signal, though it appears mac recognizes the projector.
I can repeat from 1 using a different adapter and/or cable and I get exactly the same results, but if I re-use the same cable I used previously, I get no signal at all.
What the $%@! is going on here??? Is Apple black-listing my cables or something??? I'm using everything from cheap-o cables to $$$ cables with exactly the same result.I run this projector with absolutely no problem from a dell desktop via DVI to HDMI.
For what it's worth, I'm connecting to a LG HS201 projector.
using Core-2-duo macs either with pure DVI or mini-DVI

samberl wrote:
DVI to HMDI is not supported on the Core 2 Duo Mac Mini.
You need to connect via DVI or VGA to your projector.
I have had Core2Duo Mac minis working with Sony LCD TVs and a Toshiba Plasma via DVI to HDMI cables with no problems. Obviously audio has to be run separately. There have been many reports from others that this works. It should do since both DVI and HDMI support HDCP and both are digital video connections, this after all is why a simple DVI to HDMI cable works.
What can be an issue is if your trying to do things like 3D or YCbCr colour encoding. However standard video works fine. Another common issue is if your are switching inputs to the TV perhaps via an AV Receiver or if the TV is allowed to sleep or be turned off, in these cases the Mac can see the handshake signal disappear. It is for this sort of situation Gefen makes the DVI Detective+ and the HDMI Detective+.
Since in your case the common factor is your projector and not the computer or cables it might be it at fault. Early HDMI products did have HDCP handshaking problems.
People have been using Mac minis as media center computer with HDMI for ages since the Mac mini is small and quiet, this probably goes back as far as G4 models let alone Core2Duo models.

DVI to HDMI or VGA to connect to HDTV

Hi I am researching buying a 40-42" LCD or plasma TV and I would like to be able to connect my IMac to the tv. I will mostly be using the TV to watch sports and to watch videos from my IMac.
1. Will 1080p videos played from the IMac produce good 1080p picture on the tv? I have ATI Radeon HD 2400 XT with 128MB memory.
2. Or would I be better off just going with a 720p tv and playing 720p videos from the IMac?
3. Go with a DVI to HDMI or DVI to VGA cable? I understand I'll need to get a Mini DVI to DVI adapter also.
Thank you!

1 and 2. It should work with either a 720p or 1080p HDTV.
3. Mini DVI to (regular) DVI to HDMI. That will keep the signal digital all the way. VGA is analog. There are cables that have DVI on one end and HDMI on the other end. There are several types of DVI connectors, so be sure to get the right one.
NOTE: HDMI carries audio but DVI does not, so you will still have to run audio from the iMac headphones jack to the HDTV audio input separately.

MBP won't connect to external Toshiba LCD, MiniDisplay to DVI to HDMI

Brand new Mac Book Pro, 10.6.4, won't connect to external Toshiba 40" LCD display. I'm using a MiniDisplay to DVI-D adapter coming out of the computer. Then a 10' DVI-D (single link) to HDMI cable running to the display. When I connect the external display the MBP "searches" for a few seconds, but doesn't connect, and the Toshiba display reads: No video signal. This is with the MBP open and display on. BUT, sometimes when the MBP lid is closed, and I connect the display IT WORKS for a about 20 seconds, then the computer "goes to sleep" by itself, and the display shuts off. Strange problem... Also I've tested the computer with a 24" external Planar display (MiniDisplay to DVI-D), and it worked fine. Also the TV and DVI to HDMI setup works fine with my older MBP that has a DVI output. Any ideas...?

The adapter works perfect with other computers (mac pro and dual 24" displays). The problem only seems to happen with this new MBP, Toshiba TV, and the adapter configuration I described. I'm trying to find a friend with a similar new MBP, and try it with theirs. With so many components, it's hard to isolate the problem (especially when all the pieces seem to work properly on their own).

Connecting to a Samsung TX-R3079WH HDTV w/Mini-DVI to HDMI

Greetings, I have a Samsung TX-R3079WH 30" HDTV that has an HDMI input (which works just fine via cable box input), and I have a Rev C Powerbook G4 12" 1.33 GHz with an nVIDIA GeForce FX Go5200 64 MB AGP graphics card with the mini-DVI output (which works with the converter to a 17" CRT via VGA).
I recently purchased a 4 m Radio Shack DVI to HDMI cable to connect the PowerBook to the Samsung TV. I am connecting the DVI cable through the DVI to Mini-DVI converter from Apple to the PowerBook.
At first, when I had the Mini-DVI/DVI connector attached to the laptop, I had the TV turned off and plugged in the HDMI cable to the TV. I turned on the TV, and my computer's display definitely recognized the external display. The problem initially was probably a refresh rate/resolution problem I guess, since the TV was reporting "No Signal" but the laptop definitely recognized an external display, which had its own icon in the System Preferences Displays panel (running at what looked like 640 x 480, definitely smaller than the native res 1024 x 768 of my primary display).
Anyhow, I didn't recognize what the problem was then, but now when I try and connect the DVI/Mini-DVI to the HDMI, all I get is incessant flashing from my primary display as it tries to decide whether or not there's something attached.
Any suggestions on getting this setup to work? Thanks in advance.

never mind found the mirror display function.

My Fall 2009 system DVI output to our HDTV doesn't include audio. Connecting the Macbook headphone output to the TV's RCA plugs works if TV is in AV (PC) mode, but no picture. DVI to HDMI adapter to TV works fine for picture, but no audio.

My Fall 2009 model Macbook Pro DVI output apparently doesn't include audion. Adapting DVI to HDMI works with new LG TV, but doesn't provide sound. Connecting the Macbook headphone output to the TV's RCA jacks give sound with the TV in AV (PC) mode, but no video. Is there a fix for this? Search for a DVI to HDMI adapter that includes a plug for the headphone jack comes up empty, so far.

DVI has never included audio, sorry.
There is also no DVI->HDMI adapter including a plug for audio; such thing cannot work without quite a bit of electronic extra effort.
Instead of much bla-bla, why don't you tell the exact TV model, and we'll try to come up with a solution?
BTW, no home theater AV receiver present, correct? Sound to come from the TV, correct?

Connecting a Mac Pro to an LCD HDTV

It seems that LCD monitors don't come as big as LCD TV's, and I want to use my Mac Pro to watch movies and gaming. A Samsung 35T (30") costs around 1200$ where a 46" lcd HDTV costs about the same price. There is a card you can buy for the Mac Pro which allows you to connect a TV to it through HDMI for the best quality possible: http://www.decklink.com/products/intensity/ (yeah $250 bucks)
What's my best option for an LCD around the $1000-$1500 range that is good for normal day use, gaming and watching movies. Thanks in advance for any suggestions, advice.

Since I can't afford to go out and buy several TVs to try them out is there a list somewhere that can confirm what large screen LCDs (40-50-60") do work with the Mac Pro?
Take your MacBook, a Mini-DVI to DVI adapter
<http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA5OQ&mco=MTI1Njk>
a DVI to HDMI cable
<http://store.apple.com/us/product/TR842LL/A?fnode=MTY1NDA3Ng&mco=MTUwODQxMw>
and a DVI-D (M) to DVD-D (M) cable to the TV store and try various sets. If they won't let you try them, go to another store.
Find a DVI or HDMI port on the TV that supports 1080p and connect it to the MacBook.
In the "Arrangement" tab of "Displays" system preference, turn off Mirroring. Set the resolution of the external display to 1920 x 1080 non-interlaced. Make sure there is no overscan (the pointer should not go off the edges of the screen). In the "Arrangement" tab of "Displays" system preference, drag the picture of the menu bar (aim carefully, so you get just the menu bar, not the whole display) to the picture of the external display. Make sure the entire menu bar and dock show on the TV.
If a TV works well on the MacBook's DVI port, it will work with a Mac Pro.

Connecting MBP with VGA to 32" LCD HDTV?

What's up everyone,
I'm looking at buying the new 15" Macbook Pro and connecting it to my Westinghouse 32" LCD HDTV. My TV does NOT have DVI input, but does have VGA and HDMI. Has the issue with connecting these bad boys been resolved yet? Has anyone successfully connected a Westinghouse HDTV to a MBP using VGA or HDMI? Please let me know, as I don't want to waste money on the new MBP if it isn't able to connect with my large external display (without problems).
Thanks,
Zac

Hi. I wanted your help on choosing the best settings for my external display. I currently have it out to HDMI on my 37" LCD Toshiba.
I tried to display without "mirroring" but if i dont the display on my tv is too large - very simlar to a zoomed in look. When i mirror the screen i can not see the top bar.
Video looks great on the screen.
I want my tv to display similar to a computer monitor!
Many thanks,
Tim

Connecting to LCD HDTV

What cable do I need to connect my emac (ATI graphics model) to my LCD HDTV? The connection on the TV is DVI and the emac is mini-VGA. I also have s-video, component, and composite on my TV, as well as HDMI.

You'll also want to check that the HDYV can actually display a signal as small (in terms of pixels and refresh rates) as the eMac's; compare eMac Video Display to thr owner's manual for the HDTV.

Mini DVI to VGA issues w/ LCD HDTV

I have looked all over and I can't find a solution.
I recently purchased an LCD HDTV, Insignia Brand which is a Best Buy Brand, and I bought a DVI cable to hook up to my Powerbook G4 using the Mini DVI to VGA cable. When I hook it up to my tv it works, but the screen on my Powerbook looks magnified as does the LCD TV. When I launch Safari or any other program it doesn't fit on my screen or the LCD TV and I have to resize it.
After I look at displays in system prefernces it says my max resolution is 1024 x 768.
Any help would be appreciated.
Jeremy

Just guessing - the TV's "VGA" input is limited to 1024x768, which is possible although some "VGA" inputs will work higher. Do the instructions mention a limitation like this?
I think if you turn off mirroring on the Powerbook, at least the Powerbook screen will have normal resolution, and the TV 1024x768. The TV apparently scales up image to fill the screen unless using HDMI, where is leaves the extra 342 pixels blank on the sides (1366-1024). Perhaps the TV has a mode for adjusting how the TV handles lesser resolutions (stretch, dot-by-dot, etc)

Connecting to an LCD HDTV: DVI to HDMI male or female?

Similar Messages

Maybe you are looking for