Connecting to any TV always letterboxed - why?

It seems that when I connect to a TV set, whether it's through the DVI (My sony TV has a DVI input), s-video, or RCA, the image is alway letterboxed, so stuff that should play full screen has black bars on the top and sides, making the image smaller. Letterboxed video is double letterboxed, making it even smaller. This happens on any TV set. My boss's 15" Powerbook does not do this.
Is this a common 12" PB problem? I've fooled around with all the external monitor settings, and nothing seems to fix it. It's a little annoying, as I like to play alot of things off the computer, and I don't have the budget for a Mac Mini right now.

Kenneth - I think we have the same problem but I don't think Emperor understands it. At least for me my TV is 16:9 and I would like to be able to fill up the screen without stretching the image. The TV is 1366 X 768 but that choice is not available when detecting and setting up the "second display". (Nor anything in that exact ratio). No matter what I pick there are reversed letterbox lines on the sides of the TV (unless I stretch the image to fill the TV with the remote).
So like Kenneth when I watch a "letterboxed" movie, instead of filling the screen it gets letterboxed within the reverse letterbox and is pretty little. Get it? Can the 12 inch powerbook just not support a 16:9 monitor? Looks like the new minis can (based on photos I have seen of it driving a TV).
Thanks!

Similar Messages

  • Just installed a new Airport Exteme.  Set up was no problem however we have  3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

    Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

    Well, this is interesting,
    Let me tell you coulpe of things I noticed:
    - Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
    - in some AP configurations (AP1 for example) I can see that:
    wlccp authentication-server client any method_Users
    This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
    aaa authentication login method_Users group Users
    This shows us that the method method_Users uses the server group named Users.
    let us see what is configured withe the group Users:
    aaa group server radius Users
    NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
    so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
    Check and let me know if that works.
    Regards,
    Amjad

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why can't i connect to any of my bluetooth devices that i have already paired?

    Why can't I connect to any of my Bluetooth devices i have already paired with?

    You say "I am paired" but unless you are a Bluetooth device yourself, what device are you trying to send files from? A computer? A mobile phone? If the latter, which one?
    To send files Mac to Mac, Bluetooth Sharing needs to be enabled on both Macs in the Sharing system preferences pane.
    If you are trying to send files between a Mac and an iOS device via Bluetooth, then that won't work as iOS devices don't have that functionality.

  • Why can't i connect to any gamecenter on my iPad?

    Why can't i connect to any gamecenter on my iPad?
    When i play,  i use my gamecenter to play with my friends. But it won't work!
    And sometimes when i play a game, my screen get out of the game.
    I really need help to fix this!
    And i use iOS 7 on a iPad 2

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why Does my iPad can't connect to any phone?

    It always failing when I connect to any phone.... Please help me!!!!

    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to tether your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_tethering.html
    How to Connect an iPad to an iPhone Via Bluetooth Tethering
    http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
    Get a Mi-Fi http://en.wikipedia.org/wiki/MiF
     Cheers, Tom

  • I have a problem with safari. It doesn't load any sites, thing that browers like chrome do, so it isn't a problem related to internet connections. The loading always blocks at 1/10

    I have a problem with safari. It doesn't load any sites, thing that browers like chrome do, so it isn't a problem related to internet connection. The loading always blocks at 1/10. I don't know what do to. I CAN'T use it. I have a macbook pro 15 retina late 2013 updated to Yosemite

    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    3. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    4. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click “Remove All Website Data”.

  • Why my MacBook Pro cannot connect to any wifi networks while there was no problem to doing that in the past p?

    I used to connect wifi now I cannot. Why? Need to obtain new IP address and how ?

    Hi Ole, and a warm welcome to the forums!
    It could be a HW problem, but does it get many black bars in the Airport icon?
    See if this helps hers...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select her access point(s) and Remove all her access point with the minus button.
    Launch her keychain access in Utilities and delete her access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

  • Why can't I connect to any Wi-Fi after updating my iPhone 4S to iOS 8.0.2? Please could someone help?

    HI,
    After updating my iPhone 4S to iOS 8.0.2 I can't connect to any Wi-Fi connections and it just keeps on searching for Wi-Fi networks.
    Can someone please help me with how to resolve this problem?

    The phone's performance is ok but like i know it could be better and when you switch on wi-fi it gets stuck and i have to switch it off and back on if i want to use it.
    How do i degraded to iOS 7? i only got this phone recently but its not my first iphone.

  • I set my Exchange account up and it won't connect to any of the other apps

    I reccently set up my exchange email account on my laptop and I can get and send emails from the account, but the laptop won't let me connect the exchange account with my calender, contacts, reminders, notes, safari, facetime, or any of the other apps on my laptop. It always asks me for my password and when I put it in it still says it can't connect to the exchange account. Why won't it let me connect my exchange account to my laptop apps?

    When ever I try and login to my exchange account on Safari it says it can't connect to the account to the account and to call the administrator, but then i tried tologin again and it worked. Anyway I then tried my contacts and it is still not working.

  • ScreenSharing not connecting randomly while ARD always connects

    So i just started noticing an issue using screensharing between a leopard macbook and a mac pro.. i'm always connecting from the laptop tot he pro.. which has screensharing enabled and occasionaly works without an issue.. I'm on the same LAN using the correct ip information and manually entering the address into screensharing when i start it.. connection box disappears and nothing happens.. ARD on the other hand connects instantly to the same ip and works all the time.
    So basically i'm wondering why screensharing just decides to not work some times.. i'm not sure what the temporary fix is, whether its rebooting the mac pro, or both machines.. but something does indeed fix it once in awhile.. thanks ahead of time for any ideas.. i'm kinda perplexed and screensharing is a very handy app that has a small footprint while ARD is a bit overkill for what i'm doing.

    Tried that, to no avail.
    Tried it on a Mac that's totally clean of added user-stuff i normally would have on there. No go.
    This time after a hard reset of the ipad it will NOT show up in iTunes.
    And my iPhone still works perfectly, syncs every time it has to, no restarts, no resets, no plugging in twice because the first time it didn't connect, it just works.
    So why can't the ipad do the same ?
    Seems to me it's a hardware designflaw or something.
    W.
    Message was edited by: Wallybally

  • My iPhone 5 won't connect to any bluetooth or wifi, What do I do?

    My iPhone 5 won't connect to any bluetooth or wifi, I was going to back it up and restore it but it won't back up to my macbook pro. I'm running Lion 10.7.5. as of right now. I don't know why it stopped working, my itunes is up to date and I cannot back it up to there either. What can I do?

    See if this helps
    http://support.apple.com/kb/TS1559

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

    I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

    "This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
    Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
    System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
    208.67.222.222
    208.67.220.220
    Then click OK, then click Apply.

Maybe you are looking for

  • Problem with Safari and Java

    Hi there, I need help with the above mentioned problem. At first, here is my configuration: iMac G5 17", Mac OS X 10.3.9, QuickTime 7.0.1 PRO, Safari 1.3 (v312), Java - here is the 'answer of the Terminal app - java version "1.4.2_05" Java(TM) 2 Runt

  • How to track changes in table

    hi, I have a table on server with some columns. After few days i added some more columns to it. Now i don't know which columns were added by me. We use common log in so it is also not possible to track by name. Please tell me how could i get the colu

  • PI 7.1 CTS+ - Manually deleted object in PRD system

    Hello, We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported su

  • TREX Configuration for BW or BI server.

    Hello Experts, I need to know the steps for configuring TREX for BI information (BI reports) published in KM content of the portal.. The solution should provide the indexing service for the report published.. Steps for Increased performance in search

  • Multiple Message Selects; How?

    In the Exchange Online Protection, in the Exchange Admin Center, protection, and quarantine area for releasing; how do select a group of messages or the complete selection?  I seem to be able to select only one message of the 300+ as one at a time. B