Connecting to database in studio 8

I tried to follow the tutorial at
http://www.adobe.com/devnet/coldfusion/articles/connecting_database.html.
I'm used to asp and asp.net but I'm tring to get into cold fusion.
When I specify the database file as described in the tutorial, the
tables come up as
C:\Inetpub\wwwroot\MyColdFusion\data\MySource.Distributor. And, the
final select query is SELECT Distributor_ID, Distributor_Name
FROM
C:\Inetpub\wwwroot\MyColdFusion\data\MySource.Distributor
ORDER BY Distributor_ID ASC
Why is it putting in the full path to the database? I tried
to go to advanced settings and giving it an actual connection
string, but it still asked for a database file path.

The path to Cold Fusion depends on your setup. If you
installed Cold Fusion
to run atop IIS, then it would be
C:\Inetpub\wwwroot\nameofsite. If you
installed Cold Fusion as a standalone, then it would be
C:\CFusionMX7\wwwroot\nameofsite
The query itself would not contain the path to the database
.. that should
be SELECT whatever FROM tablename ..finish query.
In Cold Fusion, you have to have the data source set up in
the Cold Fusion
Administrator .. did you do that?
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"tjones" <[email protected]> wrote in
message
news:eajdse$bqc$[email protected]..
>I tried to follow the tutorial at
>
http://www.adobe.com/devnet/coldfusion/articles/connecting_database.html.
> I'm
> used to asp and asp.net but I'm tring to get into cold
fusion. When I
> specify
> the database file as described in the tutorial, the
tables come up as
>
C:\Inetpub\wwwroot\MyColdFusion\data\MySource.Distributor. And, the
final
> select query is SELECT Distributor_ID, Distributor_Name
> FROM
C:\Inetpub\wwwroot\MyColdFusion\data\MySource.Distributor
> ORDER BY Distributor_ID ASC
> Why is it putting in the full path to the database? I
tried to go to
> advanced
> settings and giving it an actual connection string, but
it still asked for
> a
> database file path.
>

Similar Messages

  • Database connection error in Visual Studio 2013

    I am using Visual Studio 2013 and have installed MS SQL Server 2014. I am trying to generate my database from a model (edmx) but I get the following error: Cannot
    connect to <Database>. An incompatible SQL Server version was detected (Microsoft.VisualStudio.Data.Tool.Sqleditor)
    In the edmx.sql file, is written:
    -- Entity Designer DDL Script for SQL Server 2005, 2008, 2012 and Azure
    I can see that 2014 version is missing from this generated file, and seems that the program tries to connect to the 2012 version .. how can I avoid this and manage visual studio tu use the 2014 version of MS SQL Server? Thanks in advance
    I already updated the SQL Server Data Tools to the newest version.

    Hello,
    Please read the following article:
    http://support.microsoft.com/kb/2858352/en-us
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Get error when connecting SQL 2012 Management studio to SQL Server 2012 database

    I got this error message when I tried to connect to SQL Server 2012 using Management studio 2012.
    Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)

    Did this get this resolved?
    My SSMS 2012 was running without issue for several months until I installed VS2012. After the VS2012 I started getting "Service 'Microsoft.SqlServer.Management.IRegistrationService' not found" when connecting to database in SSMS 2012. I uninstalled VS2012
    and SSMS 2012 started working again. Installed VS2012 and SSMS 2012 is broken again.
    I tried the above suggestions without success. Here are the error details. Any help is greatly appreciated.
    ===================================
    Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)
    Program Location:
       at Microsoft.SqlServer.Management.ServiceProvider.GetService[T](IServiceProvider serviceProvider, Boolean throwIfNotFound)
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.Initialize()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.GetView(String urnPath)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.<GetColumnsFromNavigationService>d__11.MoveNext()
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.AddFields(List`1 list, IEnumerable`1 fields, IDictionary`2 allValidFields, AddFieldsFlags flags)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.GetParentFields(INodeInformation source, Dictionary`2& allValidColumns)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)

  • Compiling with Visual Studio ( connection to Database )

    what is the simplest way to create a new project that I can compile one of Sample source code for connection to database
    (i.e. either Proc or OCI)
    Appriciated your help

    Hello,
    Please provide details such as how are you connecting/working with data, what database is being used and any other details that can provide insight into the issue at hand.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile but do not reply to forum questions.

  • Datareader is not able to connect with database-Urgent

    Hi All,
    All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
    [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
    Module finished after a runtime of 00:00:00.2031339 with exit code -2
    Module failed due to negative exit code of -2
    It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
    It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
    Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
    Subscription:Enterprise,
    LOCATION: East Asia
    Regards,
    Biswajit

    Hi,
    Please check this url:
    https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
    which is an experiment which I created doing save as of the experiment in which the data reader works.
    I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
    Now,the data reader works fine..but the Writer fails:
    Error 0071: Incorrect username "acnadmin" or password is passed
    Strangely,its the same credentials set in the DataReader.
    Looks like all the DataInput/Output components created recently only have the problem.
    Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

  • Can't connect Azure Database in SQL Server

    Hi,
    I completed setting up the database and server on Azure, but when i tried to connect it using SQL Server 2012. I got an error.
    TITLE: Connect to Server
    Cannot connect to tcp:*******.database.windows.net,1433.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
    For help, click:
    http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
    No connection could be made because the target machine actively refused it
    My IP was already added in Azure.
    I also checked that the TCP/IP was enabled on Configuration Manager.
    Any thoughts?
    Thanks!!

    Hi Aaron,
    If you are trying to manage your database through SSMS - make sure that the TCP/IP protocol is enabled.
    1) SQL server configuration manager
    2) In 'SQL server Network configuration'
    3) Enable TCP/IP
    Also try connecting your database through the web based sql azure management studio.
    http://msdn.microsoft.com/en-us/library/azure/ee336282.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/2151.azure-and-sql-database-tutorials-tutorial-2-using-sql-database.aspx
    Girish Prajwal

  • Cannot connect to database master at SQL server at SERVERNAME

    I have installed SQL 2008 R2 in a fresh win 2008 R2. I’m running the sharepoint configuration Wizard using the database server name with the correct domain
    credentials but I get the following error message. “Cannot connect to database master at SQL server at
    SERVERNAME. The database might not exist, or the current user does not have permission to connect”
    I‘m able to login to the new SQL server using the “SQL server management studio” with no problems. I used the sa account and a domain account.
    The sharepoint server is also a new installation. And both servers have the firewall disabled.
    Thanks in advance for your help.
    Simon

    Hi,
    What is your SharePoint server’s version?
    Please make sure you use the farm admin account to launch SharePoint configuration wizard. If not, please log in with this account, then check the effect.
    In addition, check if you create a named instance, such as, servername\sharepoint, however, you only specify the servername in the configuration wizard. If this is
    the case, change to servername\sharepoint, then check the effect.
    Thanks,
    Rock Wang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Regards, Rock Wang Microsoft Online Community Support

  • Connect Oracle Database with help of sql server storedprocedure

    Hii,
              Is there Any way to connect Oracle Database Using sql server storedprocedure.I want access oracle database and take some data and insert into my sql server database.so is there any way to connect in one
    stored procedure to connect oracle database and take some data and insert in to my sql server database.
    Nikunj Nandaniya

    Hello,
    I am getting below error when i kust Clic k on Test Connection in SSMS:
    TITLE: Microsoft SQL Server Management Studio
    The test connection to the linked server failed.
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "test".
    OLE DB provider "OraOLEDB.Oracle" for linked server "test" returned message "ORA-12154: TNS:could not resolve the connect identifier specified". (Microsoft SQL Server, Error: 7303)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.4000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
    BUTTONS:
    OK
    Can you please guide is there any other setting i need to do after install Oracle Client ?
    Best Regards,
    Tushar Malvi

  • Connect ORACLE database with sysdba privileges

    Hi Guru,
    I am connecting to my ORACLE database with my VB application.
    I have problem with connecting to the database with SYSDBA privileges. i.e it is not connecting to the database with SYSDBA privileges.
    If I connect my db from SQLPLUS. Its worked like this..
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    SQL> select Name from v$datafile;
    select Name from v$datafile
    ERROR at line 1:
    ORA-00942: table or view does not exist
    SQL> connect as sysdba;
    Enter user-name: user_1
    Enter password: ****
    Connected.
    SQL> select Name from v$datafile;
    NAME
    C:\NEW\ORADATA\ITPL\SYSTEM01.DBF
    C:\NEW\ORADATA\ITPL\UNDOTBS01.DBF
    C:\NEW\ORADATA\ITPL\CWMLITE01.DBF
    C:\NEW\ORADATA\ITPL\DRSYS01.DBF
    C:\NEW\ORADATA\ITPL\EXAMPLE01.DBF
    C:\NEW\ORADATA\ITPL\INDX01.DBF
    C:\NEW\ORADATA\ITPL\ODM01.DBF
    C:\NEW\ORADATA\ITPL\TOOLS01.DBF
    C:\NEW\ORADATA\ITPL\USERS01.DBF
    C:\NEW\ORADATA\ITPL\XDB01.DBF
    10 rows selected.
    SQL>
    Now in my VB application if I am using following string to connect the database.
    m_adoCnn.ConnectionString = Provider=MSDAORA;Password=pass;User ID=user_1;DBA Privilege=SYSDBA;Data Source=ITPL
    It will connect properly to the database but gives error while executing the query select Name from v$datafile;
    as,
    ORA-00942: table or view does not exist
    Can any body help me in this or provide me proper connection string.

    Hello,
    I am getting below error when i kust Clic k on Test Connection in SSMS:
    TITLE: Microsoft SQL Server Management Studio
    The test connection to the linked server failed.
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "test".
    OLE DB provider "OraOLEDB.Oracle" for linked server "test" returned message "ORA-12154: TNS:could not resolve the connect identifier specified". (Microsoft SQL Server, Error: 7303)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.4000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
    BUTTONS:
    OK
    Can you please guide is there any other setting i need to do after install Oracle Client ?
    Best Regards,
    Tushar Malvi

  • Error connect to database

    Hi There,
    I have Essbase 11.1.1.3, and I just have Reporting Studio installed , then I try to create new Report, insert Grid, then Database Connection property, I put essbase server name (same box), then admin user name and password, Application and database, I got the follwoing error:
    Error connecting to database connection ApplicationName: CubeName
    How can I fix this?
    I did install Reporting Studio first, then found out WoekSpace is not installed, then I installed work space. Does this have anything to do with the connection error?
    Thanks
    Edited by: user8091395 on Jul 15, 2010 3:09 PM

    Thank you for all for the reply.
    This is my test box, which I have all essbase 11.1.1.3 components installed at this box (essbase server, eas, essbase studio), and yes, I can connect fine using Excel Add in from my laptop.
    Essbase has been running for a while, then we need to have reporting tool, so I decide to install Reporting studio now, I download Financial Reporting studio zip file, install successfully at current essbase box. and got error at login, then realize I am missing workspace, then I install workspace, now I can login to reporting studio.
    Only thing now is that I get the error I mention when connecting to essbase app and db.
    Another thing I would like to mention is that I am using native essbase security on my test box, not share service.
    Thanks again
    Edited by: user8091395 on Jul 16, 2010 2:10 PM

  • Code to connect to database in  Webdynpro-- iviews

    Hi All-
    Could you let me know the code to connect to database
    in WebDynPro-->iviews.
    Regards,
    Cris

    Hi,
    Here are the two ways of connecting to a database through coding:
    ////1////
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
              java.sql.Connection conn= java.sql.DriverManager.getConnection("jdbc:microsoft:sqlserver://<IP>:<port>;user=<abc>;password=<xyz>;database=<DB name>");
    ////2////     
    InitialContext initialContext = new InitialContext();
    DataSource dataSource = (DataSource)initialContext.lookup("jdbc/SRI");
    java.sql.Connection conn = dataSource.getConnection();
    Regards
    Srinivasan T

  • How to find the number of users  connected to database from OS level(Linux)

    Hi All,
    Could anyone know , how to find the number of users connected to database without connecting with sql*plus
    is there any command to find it?
    example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
    oracle version:- 10g,11g
    Operating System:- OEL4/OEL5/AIX/Solaris
    any help will be appreciated.
    Thanks in advance.
    Thank you.
    Regards,
    Rajesh.

    Excellent.
    Tested, works as long as you set the ORACLE_SID first ( to change databases )
    ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
    Thanks!
    select OSUSER
        from V$SESSION
    where AUDSID = SYS_CONTEXT('userenv','sessionid')
        and rownum=1;Best Regards
    mseberg

  • I am not able to connect to database in sql developer.how to do?

    I downloaded sqldeveloper 1.5.4.59.40. iam not able to establish connection to database. Can anyone tell me ?

    Have you created a database (or have one you connect to)?
    Have you created the Net Service connections for SQL Developer to use?
    Does SQL Developer have access to this Net Serviice name?
    Have you created the connections from SQL Developer?
    Can you post an error message?
    See
    <br>
    Oracle Database FAQs
    </br>

  • Managed Server can not connect to Database

    I have a WebLogic cluster with three managed Server on 3 different machines.
    ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
    Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
    It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
    ( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
    Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

    JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
    Ravi Jegga

  • Taking too much time (1min) to connect to database

    Hi,
    I have oracle 10.2 and 10g application server.
    Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
    Please share your experience.
    Regards,
    Naseer

    Dear AnaTech,
    i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
    i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
    my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
    now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
    this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
    I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
    Waiting for your great response.
    Regards,
    K.J.J.C

Maybe you are looking for

  • How to Count number of rows

    Hi All If I have 2 tables with records in it, with primary Table A and Foreign key Table B structure.Then how to count the no of occurances of each records of table A in table B and print the values. Thanx

  • Why does a utube video show on my MacBook Pro, but not on my iPad?

    Hello, My MB Pro runs Mavericks, ver.10.9.4, my iPad is an iPad4 ver. 7.1.2 (11D257), Model: MD512B/A, 64GB Retina.  Browser: Firefox ver 32.0.1 I use iWeb 3.0.4 (601) to run my website: http://www.lakesweddingmusic.com On my website, I have three uT

  • Unable to log into websites since Safari 7.1 upgrades

    Ever since I have upgraded to Safari 7.1, I am no longer able to log into my US Airways frequent flier account.  Clicking on the login button won't do anything.  It worked flawlessly with the previous version.  Also, I use TitanTV to look at TV listi

  • Running a jar from the command line

    I am trying to run a Jar from the command line. I have a number of classes in a package called "trainnn". I put all the classes into a jar jar cvf name.jar trainnn\*.classI then creat a file called mainClass.txt with the line (with a blank return lin

  • Where I can get to download the SOA Suite 10.1.3.4.0

    Hi All, In Oracle Downloads, I find only the SOA Suit 10.1.3.1.0 where as I need the latest version of 10.1.3.4.0. So please guide me or send me the link from where I can find the same. It is little urgent, so please get me some idea. Thanks in advan