Connecting to disk remotely
After reading the manual I could not find anything on connecting to my hard drive from other locations. I talked with support they said it could be done but it is not supported.
Under the disk tab I have WAN shared checked but don't know what to do after that any one know how this is done or where I can find instructions.
I Called ATT and opened port 548 with TCP and tried to connect again seemingly better results it tries to connect for about 30 sec and then says it cannot connect. Before it instantly said server was not available. The other choice in the router is UDP Tried that and went back to not available so I changed it back to TCP any more ideas. Thanks
Similar Messages
-
DUPLICATE DB : ORA-17629: Cannot connect to the remote database server
[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverWelcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112 -
How to share an airport connected USB Disk over internet
Hi all,
I'm trying to get my AEBS connected USB Disk to be accessible over the internet, so I can access it when I'm not at home.
In Airport Utility I checked both 'Share Disks over WAN' and 'Share Disks over the internet using Bonjour'.
I've also set a few accounts who can connect to it (instead of being guests).
But what's next?
I can connect to the disk in Finder by selecting the menu-option 'Connect to server' and typing in 'afp://ip-address' (where IP-address is for the AEBS) as long as I'm in my home network, but I tried the same at my work but that doesn't work.
Do I have to configure the AEBS in some other way to make this possible?
Any help, advice would be appreciated.Using the AirPort Utility, you will need to both enable File Sharing and configure the AirPort for Port Mapping. (Note: It is assumed that your 802.11n AirPort Extreme Base Station (AEBSn) is the only Internet router in your current network configuration. That is, it is connected directly to a broadband Internet modem, and not another router upstream of it.)
The following are the basic steps to configure an AirPort Disk to be accessed from the Internet:
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect. -
PXE Boot a client to connect to a Remote Desktop Session Host/Terminal Server Farm via SCCM 2007
Hi all,
we've got a bunch of old desktops which are destined for disposal but i was wondering if we couldn't use them as disk-free clients to connect to our Remote Desktop farm. I did some digging and have managed to put together an iso which will boot
the machine into WinPE and then connect to our farm. However, since it's an iso i have to use either a cd or usb for this to work. (This is pretty much what i did: http://www.iammacgyver.com/2011/02/easy-rdp-60-from-winpe-30-simple-boot.html)
What i want to do is to advertise the boot.wim to the client via SCCM so that it boots via PXE and then picks up the WinPE image and connect to the RD farm. I've imported the boot.wim file into SCCM under Boot Images and created an empty Task Sequence
with the boot.wim as its Boot Image. I then advertised this Task Sequence to a collection which contains the old desktop clients. The machine PXE boots ok and loads up WinPE but rather than launch a remote desktop connection, it trundles through the normal
WinPE stages and once it's finished 'Preparing Network Connections' it simply ends and the client reboots.
Is what i'm trying actually possible?
Can anyone tell me why the ISO works yet pushing the boot.wim out as a Boot Image doesn't? I know the boot.wim file (which is the same one present in the ISO) is ok since the client boots into WinPE fine when PXE booted so why doesn't the remote
desktop session conenction launch? How is booting from the ISO different from booting from the PXE boot.wim file?
Slightly long winded problem so many thanks in advance to anyone who can pass some info my way!It doesn't work because importing it into ConfigMgr injects binaries and the task sequence engine along with the process to launch the engine thus suppressing whatever you've got configured.
Perhaps you could use a pre start command (pre-execution hook in 2007 parlance) to launch your RDP process though.
Jason | http://blog.configmgrftw.com | @jasonsandys -
The Finder automaticly try to connect to a remote server then freeze
In fact the title tell it all!
After a restart or after a long periode of sleep mode, my computer always try to connect to a remote server that i was using many year a go when I open a finder window to browse my file. The login and password window appear and if i try to cancel the finder crash. If i make a force quit and i open a window (by clicking on the finder icon on the dock by exemple) the login and password window appear again and the finder freeze. To be able to make my computer work fine I have to desactivate airport and then force-quit the finder, open a finder window and re-activate airport.
I went to the keychain utility panel to try to remove a reference to this old remote server by my computer try to connect automaticly any way. Could any body can help this probleme make me go crazy!I did what you said, it make me think that a was using Synchronize Pro to sync a folder on the remote server with a folder on my computer, so i was sure the this why the computer try to log into this server so i trash a the preference file of synchronize pro and i restart my computer, I was already celebrate then bang! The computer freeze again just after the startup!!!!!!!
So there is the list of thing on the consol, I'm not good whit those kind of thing so i put all the informations. The computer crash at 20:49:??
Feb 21 20:48:35 localhost SystemStarter: Bienvenue sur Macintosh.
Feb 21 20:48:35 localhost kernel: UniNEnet: Ethernet address 00:03:93:91:48:da
Feb 21 20:48:35 localhost kernel: AirPortDriver: Ethernet address 00:30:65:03:6b:85
Feb 21 20:48:35 localhost kernel: IOFireWireIP: FireWire address 00:03:93:ff:fe:91:48:da
Feb 21 20:48:35 localhost lookupd[129]: lookupd (version 324.13) starting - Wed Feb 21 20:48:35 2007
Feb 21 20:48:40 localhost ConsoleMessage: Selecting SymDC Extension
Feb 21 20:48:40 localhost ConsoleMessage: Starting SecurityServer
Feb 21 20:48:40 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
Feb 21 20:48:40 localhost ConsoleMessage: Starting kernel event agent
Feb 21 20:48:40 localhost ConsoleMessage: Starting Virtual PC OS Services
Feb 21 20:48:40 localhost ConsoleMessage: Starting timed execution services
Feb 21 20:48:40 localhost ConsoleMessage: Initializing network
Feb 21 20:48:43 localhost diskarbitrationd[91]: disk0s5 hfs 73F314A9-9918-3ED8-83E7-27E8805BA20C Macintosh HD /
Feb 21 20:48:43 localhost SystemStarter: Selecting SymDC Extension
Feb 21 20:48:43 localhost SystemStarter: Starting SecurityServer
Feb 21 20:48:43 localhost SystemStarter: D?marrage du r?pondeur DNS multi-diffusion Apple
Feb 21 20:48:43 localhost SystemStarter: D?marrage de l?agent d??v?nement du kernel
Feb 21 20:48:43 localhost SystemStarter: Starting Virtual PC OS Services
Feb 21 20:48:44 localhost mDNSResponder[174]: mDNSResponder-58.8.1 (Jan 31 2005 21:11:41) starting
Feb 21 20:48:44 localhost mDNSResponder[174]: SetupAddr invalid sa_family 0
Feb 21 20:48:47 localhost kernel: ATY,Stone_A: vram [bc000000:01000000]
Feb 21 20:48:47 localhost kernel: ATY,Stone_B: vram [b8000000:01000000]
Feb 21 20:48:47 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
Feb 21 20:48:47 localhost ConsoleMessage: Checking disks
Feb 21 20:48:47 localhost syslogd: /dev/console: Input/output error
Feb 21 20:48:47 localhost init: kernel security level changed from 0 to 1
Feb 21 20:48:47 localhost ConsoleMessage: Starting Norton Volume Assist services
Feb 21 20:48:47 localhost ConsoleMessage: Starting File Deletion Tracking services
Feb 21 20:48:48 localhost DirectoryService[204]: Launched version 1.8.4 (v258.2)
Feb 21 20:48:48 localhost loginwindow[191]: Sent launch request message to DirectoryService mach_init port
aped[181]: Attach denied: super-user process, for SecurityAgent[207]
Feb 21 20:48:52 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/libexec/fix_prebinding": exited with non-zero status 1 [pid 216]
Feb 21 20:48:55 localhost SystemStarter: Attente de initialisation du r?seau
Feb 21 20:48:58 localhost ConsoleMessage: Loading Shared IP extension
Feb 21 20:48:58 localhost SystemStarter: Chargement de l?extension de l?adresse IP partag?e
Feb 21 20:48:58 localhost SystemStarter: Start up Flexlm License Server for AW Apps (233) did not complete successfully.
Feb 21 20:48:58 localhost NUMCompatibilityCheck[248]: OS version 0790 accepted as okay.
Feb 21 20:48:59 localhost ConsoleMessage: Starting Apple File Service
Feb 21 20:48:59 localhost ConsoleMessage: Starting printing services
Feb 21 20:48:59 localhost ConsoleMessage: Starting KeyAccess
Feb 21 20:48:59 localhost SystemStarter: D?marrage du service de fichiers Apple
Feb 21 20:48:59 localhost SystemStarter: D?marrage des services d?impression
Feb 21 20:48:59 localhost SystemStarter: Starting KeyAccess
Feb 21 20:48:59 localhost KeyAccess: started
Feb 21 20:49:04 localhost SystemStarter: Attente de Extensions du r?seau
Feb 21 20:49:05 localhost ConsoleMessage: Loading IP Firewall extension
Feb 21 20:49:05 localhost SystemStarter: Chargement de l?extension du coupe-feu IP
aped[181]: Attach denied: super-user process, for KeyAccess[293]
Feb 21 20:49:07 localhost kernel: IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
Feb 21 20:49:07 localhost kernel: IPv6 packet filtering initialized, default to accept, logging disabled
Feb 21 20:49:07 localhost kernel: IP firewall loaded
Feb 21 20:49:07 localhost SystemStarter: Attente de Extensions du r?seau
Feb 21 20:49:08 localhost ConsoleMessage: Starting internet services
Feb 21 20:49:08 localhost SystemStarter: D?marrage des services internet
Feb 21 20:49:09 localhost xinetd[309]: xinetd Version 2.3.11 started with libwrap options compiled in.
Feb 21 20:49:09 localhost xinetd[309]: Started working: 2 available services
Feb 21 20:49:13 localhost SystemStarter: Attente de Printing Services
Feb 21 20:49:16 localhost SystemStarter: Attente de Printing Services
Feb 21 20:49:17 localhost SystemStarter: The following StartupItems failed to properly start:
Feb 21 20:49:17 localhost SystemStarter: /Library/StartupItems/AW_flexlmStartupItem
Feb 21 20:49:17 localhost SystemStarter: - execution of Startup script failed
Feb 21 20:49:17 localhost SystemStarter:
Feb 21 20:49:17 localhost SystemStarter: D?marrage termin?.
Feb 21 20:49:59 localhost crontab[321]: (root) LIST (Marc) -
Disk Utitlity has "Lost Connection" with Disk Management tool"
[ Edited by Apple Discussions Moderator; please start a new topic about your technical issue. ]
Running OSX10.3.8
I installed:
"iTunes" (6.0.2)
"iPod Updater 2005-11-17" ((null))
"iChat Update" (2.1)
Went to repair disk permissions
I get this error:
Disk Utitlity has "Lost Connection" with Disk Management tool" Please quit Disk Utility.
then it says quitting Disk Utility may render the disk useless. Stopping the scan just gives a "stopped by User" red text message in the DU screen.
Had to Quit. No other way out.
Now it will not repair "or" verify Disk permissions at all.
What to do?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)Getting the same results booting off of the install CD. I even ran fsck -y after a soft boot(command S). Note I also installed the iPod updater and iChat update.
I'm getting a crash log that has to do with DiskManagement
Path: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
I tossed the pref file for Disk utility and tried to locate a pref for the Disk Management but nada...
Is there a prefs file that needs to be tossed?
Anyone do a recent Onyx Maintainence cleaning?
Is there a way to do an iTunes Uninstal and reinstall a previous version?
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8)
Powermac G4 1.25ghz, OS9/OSX Mac OS X (10.3.8) -
How to connect to a Remote Oracle Database
Hi Friends,
The error I encountered while connecting to a remote database is ���DataSource name is too long
String url="jdbc:odbc://abc:1523/test";
con = DriverManager.getConnection(url,"xyz","xyz1");
Here Remote Host-name = abc
Port = 1523
DataSource Name=test
User-name = xyz
Password =xyz1
The DataSource is created Using Oracle ODBC driver on Windows 2000
With following details
DataSource name=test
Service name = xyz (Database Name)
User-id=xyz (User name)
Thanks in advance
HamsaAs suggested you should use a oracle jdbc driver type 2 (JDBC OCI Driver) or 4 (JDBC Thin Driver).
Because the thin driver is written entirely in Java, is platform-independent. It does not require any
additional Oracle software on the client side. It can be used for Oracle JDBC applets or applications.
The OCI driver is targeted for client-server Java applications. It requires an Oracle client installation, so it is Oracle platform-specific and it is not suitable for applets.
To connect to a database using those drivers here you have two examples of establishing a connection:
For OCI driver:
Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:@<dbName>","user","password");
For thin driver:
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@<host>:<port>:<dbName>", "user", "password");
And make sure that the classes12.zip file is included in your CLASSPATH. -
I installed 10, iTunes no longer connects to airport Remote Speakers
Boy, this is real irritating. I just use iTunes to stream internet radio to my stereo. It was all working fine, then I updated to v10 and nothing works anymore.
BIG PROBLEM...the option to choose computer speakers or remote speakers DISAPPEARED. Well, it was there for a second after I ran iTunes 10 for the first time, then the option DISAPPEARED.
Heck, I even unistalled everything and went back to v9.2.1....But the same problem...ITS GONE!
Now even I can't get iTunes to even connect to my Airport Express at all to even play music on the computer speakers.
Grrrrrr. I was all bloody working till v10 came along!!!
BTW, I'm using Comodo firewall. It was all working before, like I said.Well I uninstalled Comodo and turned on Windows firewall. I re-installed iTunes.
I went into firewall settings and iTunes was checked off (allowed) for both home & public networks. Didn't work. I saw Bonjour on there and just 'home' was checked off, so I checked off 'public' to see if it mattered.
It did work. iTunes connected to the remote speakers....but for some reason, only for a very short period, then I get a network error.
This is freaking unbelievable. It was all working fine till I stupidly updtated to 10. Grrrrrrrrr -
I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.
Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting). -
How can I connect to a remote firewire camera?
We have a system that has the following peripherals connected to it:
1 - firewire camera
2 - serial port devices
2 - emulated serial port devices (on VCP USB drivers)
1 - Ethernet device
We have developed an application using CVI 8.1, NI Vision 8.6, and NI-IMAQdx 3.2 (it's an older cam). I would like to make this system accessible remotely (not remote desktop) and was looking for a way to program a server/client setup. Although it will be a lot of work, we can easily take care of a protocol for the Ethernet and serial devices. Where I'm getting stuck is the camera.
I've searched the forums and it seems that people can use the RT software module on specific host hardware to do just that. We don't want to invest in purchasing a separate software module or another piece of hardware, so I was wondering if it was possible to configure MAX or the NI vision server somehow to connect to a remote win7 PC to grab frames and configure the camera OR is there an easy way that I can transfer the stream over TCP/IP?
The only solution I can come up with is the grab a frame, save to .PNG, transmit it, and then load it on the client side. This seems very wasteful (and slow considering the harddrive will constantly buffer the data) and I would need to do a lot of encapsulation for changing camera settings, etc. Further, I'm not sure how well this would work for when we try to calibrate the camera with the IMAQ drivers. Is there a way to get the size and all relevant data structures in memory of the vision server so I can transfer them?
Finally, if there is a simple way of configuring and doing all of this for the camera that I'm missing (through MAX), then is there a similarly easy way of mapping the remote serial ports and of bridging the Ethernet data? I know there are a few pieces of existing software for the serial ports, but was looking to make a single software solution.
Thanks for taking the time!
-StanHi Stan,
Welcome to the NI Discussion forums! Thanks for posting your application here. There certainly are more efficient ways of streaming IMAQ images over a network. One such method would be to convert the IMAQ image type to a 2D array and then pass the data through TCP/IP, as you eluded to. Do you have access to LabVIEW? If so, you can look at this community example and base your CVI code on it. Although it is meant for a Real-time CVS acting as the remote system, you should be able to run the code on a regular PC. If you don't have access to the LabVIEW development system, the overall code structure for the server system is as follows:
- Open IMAQdx reference, initiate a TCP connection, Create IMAQ image buffer
- Initialize an IMAQdx grab
- Loop:
- Call IMAQdx grab
- Use the IMAQ Flatten Image to String to convert the IMAQ image to a string
- Call TCP Write to send the string length first, then again to send the actual string data
- Dispose of the IMAQ image buffer, close the IMAQdx reference, close the TCP connection
On the client end, you just need to open the TCP connection and call TCP read to read the string size and then the string data. Then, you can use the unflatten from string function to convert the string back to an IMAQ image data type. After this, it is up to you how you want to process the data (display it on the screen, write to an AVI file, etc).
If you are not sure how to implement TCP/IP programs in CVI, please take a look at this tutorial. If you have more in-depth questions about implementing the TCP/IP side of the program in CVI, you may wish to post that specific question on the CVI board.
With regards to mapping the serial ports remotely, if you are already using NI-VISA for COM port communication, take a look at this document on Remote Instrument Control with NI-VISA. Essentially, you should be able to access the VISA resource (e.g. a COM port) remotely by enabling the remote NI-VISA server on the client machine. For more specific help with this aspect of your code, please post to the GPIB/VISA board.
Feel free to post again here if you have more IMAQ and vision-related questions. Hope this helps! -
Windows 8 crashes when trying to connect to a Remote Desktop or a VPN
Hello,
When trying to perform a connection to a remote desktop or a VPN the application crashes (either MSTSC.exe or Explorer.exe). I've noticed this happens when credentials are about to be asked (same happens when trying to access a restricted folder on a network
machine).
Useful PC specs:
- i7 3770k, 16GB Ram, GTX460 (2x-SLI) (Intel HD 4000 on board)
> All latest drivers and Windows updates installed.
> Ran Memory Diagnostic. No errors.
Event Log:
Faulting application name: mstsc.exe, version: 6.2.9200.16384, time stamp: 0x50108ae1
Faulting module name: DUI70.dll, version: 6.2.9200.16384, time stamp: 0x50108e6a
Exception code: 0xc0000005
Fault offset: 0x00000000000027ee
Faulting process ID: 0x994
Faulting application start time: 0x01cdf16f9b46e882
Faulting application path: C:\WINDOWS\system32\mstsc.exe
Faulting module path: C:\WINDOWS\system32\DUI70.dll
Report ID: dadcc27c-5d62-11e2-bf13-bc5ff4390e7a
Faulting package full name:
Faulting package-relative application ID:
WinDbg: (RDP Crash dump with procdump)
Loading unloaded module list
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(994.1118): Access violation - code c0000005 (first/second chance not available)
dui70!DirectUI::Element::_SetValue+0xe:
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
0:000> .ecxr
rax=000007fec5cbbd80 rbx=000000989f3afa28 rcx=0000000000000000
rdx=000007fec5cbbd80 rsi=00000000fffffffd rdi=00000098a3e805b0
rip=000007fec5be27ee rsp=000000989f23a8b0 rbp=0000000000000000
r8=0000000000000001 r9=000000989f3afa28 r10=0000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=00000098a1d29401
iopl=0 nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010200
dui70!DirectUI::Element::_SetValue+0xe:
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
0:000> !analyze -v
* Exception Analysis *
GetPageUrlData failed, server returned HTTP status 404
URL requested: http://watson.microsoft.com/StageOne/mstsc_exe/6_2_9200_16384/50108ae1/dui70_dll/6_2_9200_16384/50108e6a/c0000005/000027ee.htm?Retriage=1
FAULTING_IP:
dui70!DirectUI::Element::_SetValue+e
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx]
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 000007fec5be27ee (dui70!DirectUI::Element::_SetValue+0x000000000000000e)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
DEFAULT_BUCKET_ID: NULL_POINTER_READ
PROCESS_NAME: mstsc.exe
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 0000000000000000
READ_ADDRESS: 0000000000000000
FOLLOWUP_IP:
dui70!DirectUI::Element::_SetValue+e
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx]
MOD_LIST: <ANALYSIS/>
NTGLOBALFLAG: 0
APPLICATION_VERIFIER_FLAGS: 0
FAULTING_THREAD: 0000000000001118
PRIMARY_PROBLEM_CLASS: NULL_POINTER_READ
BUGCHECK_STR: APPLICATION_FAULT_NULL_POINTER_READ
LAST_CONTROL_TRANSFER: from 000007fec5be7db8 to 000007fec5be27ee
STACK_TEXT:
00000098`9f23a8b0 000007fe`c5be7db8 : 00000098`9f23a950 00000098`00000004 00000098`9f23a954 00000098`9f3afa28 : dui70!DirectUI::Element::_SetValue+0xe
00000098`9f23a930 000007fe`b5378a73 : 00000098`a3f11208 00000098`9f23aa70 000007fe`b5418c58 000007fe`c4dc20f5 : dui70!DirectUI::Element::SetLayoutPos+0x98
00000098`9f23a970 000007fe`b53a5f7e : 00000098`a3f154d0 000007fe`b533bd54 00000098`a3ea80e0 00000000`00000000 : authui!UserList::_OnEnumerationSyncReply+0x689
00000098`9f23af80 000007fe`b5332670 : 00000098`a3f111f0 000007fe`b53212d1 00000098`a3f153a0 00000000`00000001 : authui!CCredDialog::UIJobEvent+0x15e
00000098`9f23afc0 000007fe`b533cf1b : 00000000`00000000 00000000`00000000 00000000`00000000 000007fe`cae3545f : authui!CEnumerationSyncReplyJob::DeferredExecute+0x20
00000098`9f23b000 000007fe`b533cfbc : 00000098`a3f111f0 00000000`00000001 00000000`00000000 00000098`0000029e : authui!CDeferredUIThreadJob::Do+0x37
00000098`9f23b030 000007fe`b53a7f42 : 00000098`a1d29350 00000000`000e0602 00000000`00000002 00000000`000e0602 : authui!CCredentialJobQueue::_ProcessJobs+0x69
00000098`9f23b070 000007fe`b53a7e76 : 00000000`00000000 00000000`00000000 00000000`00008003 00000000`00000000 : authui!CCredDialog::DialogProc+0xa2
00000098`9f23b0d0 000007fe`c86ab3b9 : 00000000`00000001 00000098`9f23b241 00000000`00008003 00000000`00000000 : authui!CCredDialog::s_DialogProc+0x66
00000098`9f23b100 000007fe`c86ab108 : 00000098`9f9522d0 00000000`00000000 00000000`00008003 00000000`00000000 : user32!UserCallDlgProcCheckWow+0x135
00000098`9f23b1d0 000007fe`c86ab02e : 00000000`00000000 00000000`000e0602 00000000`00008003 000007fe`c4dc120b : user32!DefDlgProcWorker+0xb8
00000098`9f23b2a0 000007fe`c869171e : 00000000`00000001 00000000`00000000 00000000`00000000 00000000`00000000 : user32!DefDlgProcW+0x56
00000098`9f23b2e0 000007fe`c86914d7 : 00000098`9f9522d0 00000098`9f23b4e0 000007f7`f30de800 000007fe`cae31b95 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23b3a0 000007fe`c86be067 : 00000098`9f9522d0 00000098`9f9522d0 00000098`9f9522d0 00000000`00000001 : user32!DispatchMessageWorker+0x1a7
00000098`9f23b420 000007fe`c86bc641 : 00000098`9f9522d0 00000098`9f9522d0 00000000`00000000 00000000`0000c000 : user32!IsDialogMessageW+0x242
00000098`9f23b4b0 000007fe`c86bb8a3 : 00000000`00000000 00000000`000909fc 000007fe`b53a7e10 00000098`9f3a6cd0 : user32!DialogBox2+0xfc
00000098`9f23b540 000007fe`c86bb936 : 000007fe`b5320000 00000000`000909fc 000007fe`b53a7e10 000007fe`b53a7df8 : user32!InternalDialogBox+0x113
00000098`9f23b5a0 000007fe`c86bbc1b : 00000000`00000000 000007fe`b5320000 00000098`9f3a6cd0 00000098`9f3a6cd0 : user32!DialogBoxIndirectParamAorW+0x56
00000098`9f23b5e0 000007fe`b53a7c91 : 00000000`00000000 00000000`00000000 00000098`9f3a6cd0 00000098`9f3a6cd0 : user32!DialogBoxIndirectParamW+0x1b
00000098`9f23b620 000007fe`b539d0d0 : 00000098`a1d29350 00000000`00000000 00000098`9f3ec310 000007fe`b7d77987 : authui!CCredDialog::Dialog+0x151
00000098`9f23b670 000007fe`b7d6d268 : 10458c33`00000029 00000098`9f23b800 00000098`9f3ebac0 000007fe`b7d6d370 : authui!CCredUI::CredUIPromptForWindowsCredentialsW+0x1dc
00000098`9f23b700 000007fe`b7d6d503 : 00000098`00000003 00000000`00000000 00000098`9f23ba10 00000098`9f3ebac0 : credui!CredUIPromptForWindowsCredentialsWorker+0x310
00000098`9f23b850 000007fe`ac10c4fd : 00000098`9f3ebac0 00000098`9f23baa0 00000098`9f23ba10 00000098`9f23ba28 : credui!CredUIPromptForWindowsCredentialsW+0x17b
00000098`9f23b8f0 000007fe`ac0a0a85 : 00000000`00000000 00000098`00000000 00000000`00000000 00000000`00000000 : mstscax!CTscCredentialsQueryUi::PromptForCredentialsNew+0x159
00000098`9f23b9c0 000007fe`ac09e8e8 : 00000098`9f362f38 00000000`00000000 00000000`00000000 00000098`a0fed860 : mstscax!CTscCredsAssistant::PromptForTsCredentials+0x4e5
00000098`9f23d050 000007fe`ac0a13f7 : 00000098`9f351050 00000000`00000000 00000000`00000000 00000098`a0f24d50 : mstscax!CTscCredsAssistant::AcquireTsCredentials+0x8f4
00000098`9f23d770 000007fe`ac0716fb : 00000098`a0f24d50 00000098`a0f24d50 00000000`00000000 00000000`00000000 : mstscax!CTscCredsAssistant::OnSecurityLayerNegotiationComplete+0x1af
00000098`9f23e000 000007fe`ac179428 : 00000098`00000002 00000098`a0f5fee0 00000098`a0f5fee0 00000000`00000001 : mstscax!CUI::OnSecurityLayerNegotiationComplete+0x11f
00000098`9f23e060 000007fe`ac179594 : 00000098`a0f1c540 00000000`00000000 00000000`00000000 00000000`00000000 : mstscax!CTSThread::RunQueueEvent+0x104
00000098`9f23e0b0 000007fe`ac17baf2 : 00000098`a0f1c540 000007fe`c8691742 00000098`a0f1bf30 00000000`00000000 : mstscax!CTSThread::RunAllQueueEvents+0xcc
00000098`9f23e110 000007fe`ac17bb28 : 00000098`a0f1bf30 00000000`00000000 00000000`00000000 00000000`00000000 : mstscax!CTSThread::OnNotifyThreadEventQueue+0xa6
00000098`9f23e150 000007fe`abefb451 : 00000000`00000000 00000000`00000000 000061f5`6df98991 ffffffff`ffffffff : mstscax!CTSThread::OnNotifyThreadMessage+0x20
00000098`9f23e180 000007fe`c869171e : 000007fe`c8691742 00000000`00000000 00000000`00035090 00000098`9f919f70 : mstscax!PAL_System_Win32_ThreadWndProc+0x19
00000098`9f23e1b0 000007fe`c86914d7 : 00000098`9f94fb70 00000098`9f23e320 000007f7`f30de800 000007fe`abefb438 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23e270 000007fe`c86bc6c4 : 00000098`9f950eb0 00000098`9f950eb0 00000000`00000001 00000000`0000c000 : user32!DispatchMessageWorker+0x1a7
00000098`9f23e2f0 000007fe`c86bb8a3 : 00000000`00000000 00000000`000909fc 000007f7`f331d518 000007fe`c81931b2 : user32!DialogBox2+0x219
00000098`9f23e380 000007fe`c86bb936 : 000007f7`f32c0000 00000000`000909fc 000007f7`f331d518 00000000`000909fc : user32!InternalDialogBox+0x113
00000098`9f23e3e0 000007fe`c86bbbe9 : 000007f7`f32c0000 00000098`9f23e4e0 00000000`000909fc 00000000`00000000 : user32!DialogBoxIndirectParamAorW+0x56
00000098`9f23e420 000007f7`f331d788 : 00000000`000909fc 00000098`9f23e570 00000098`9f23e4e0 ffffffff`ffffffff : user32!DialogBoxParamW+0x69
00000098`9f23e460 000007f7`f331ce9e : 00000098`a0efedc0 000007f7`f32c7ab0 000007f7`f333b420 00000000`00000000 : mstsc!CDlgBase::CreateModalDialog+0x168
00000098`9f23e500 000007f7`f32e2604 : 00000098`a0efedc0 00000098`9f23ead0 000007f7`f32c7ab0 00000000`00000000 : mstsc!CDlgBase::DoModal+0x12
00000098`9f23e540 000007f7`f32dbd6b : 00000098`9f4ec3e0 00000098`9f4ec3e0 000007f7`f32c7ab0 000007f7`f333b420 : mstsc!CDefaultContWndExt::OnConnectionIssued+0xec
00000098`9f23e9d0 000007f7`f3302bd9 : 000007f7`f32cbb00 000007f7`f32cbb00 00000000`00000000 00000098`a0f1f350 : mstsc!CContainerWnd::StartConnection+0x4d7
00000098`9f23ee70 000007f7`f3301feb : 00000000`000909fc 00000000`00000111 00000000`000c09be 00000000`00000001 : mstsc!CMainDlg::DialogBoxProc+0xbb9
00000098`9f23f1b0 000007fe`c86ab3b9 : 00000000`00000001 00000098`9f23f331 00000000`00000111 00000000`00000000 : mstsc!CMainDlg::StaticDialogBoxProc+0x63
00000098`9f23f1f0 000007fe`c86ab108 : 00000098`9f919f70 00000000`00000000 00000000`00000111 00000000`00000001 : user32!UserCallDlgProcCheckWow+0x135
00000098`9f23f2c0 000007fe`c86ab02e : 00000000`000c09be 00000098`9f23f500 00000000`00000111 000007fe`cae31b95 : user32!DefDlgProcWorker+0xb8
00000098`9f23f390 000007fe`c869171e : 00000000`00000001 00000000`00000000 00000000`00000000 000007fe`c8be1535 : user32!DefDlgProcW+0x56
00000098`9f23f3d0 000007fe`c86d22f9 : 00000000`000c09be 00000000`00000111 00000000`80000000 00000000`00000000 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23f490 000007fe`c869487a : 00000000`00000000 00000000`00000000 00000000`00000001 00000098`9f919f70 : user32!SendMessageWorker+0xa72
00000098`9f23f540 000007fe`c86bbdd3 : 00000000`00090a12 00000098`9f919f70 00000000`000909fc 00000000`000909fc : user32!SendMessageW+0x10a
00000098`9f23f5a0 000007f7`f3312409 : 00000098`a0ef0080 00000098`a0ef0080 00000000`00000000 00000000`03260475 : user32!IsDialogMessageW+0x40b
00000098`9f23f630 000007f7`f3312a07 : 000007f7`f32c0000 00000098`9f312374 000007f7`f333b420 000007f7`00000000 : mstsc!TSCMain+0x695
00000098`9f23f6e0 000007f7`f33319c9 : 00000098`9f313100 00000000`00000000 00000000`00000000 00000000`00000000 : mstsc!WinMain+0x42f
00000098`9f23f750 000007fe`c8fe167e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : mstsc!ATL::AtlWinModuleTerm+0x375
00000098`9f23f810 000007fe`cae53501 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x1a
00000098`9f23f840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x1d
STACK_COMMAND: ~0s; .ecxr ; kb
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: dui70!DirectUI::Element::_SetValue+e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: dui70
IMAGE_NAME: dui70.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 50108e6a
FAILURE_BUCKET_ID: NULL_POINTER_READ_c0000005_dui70.dll!DirectUI::Element::_SetValue
BUCKET_ID: X64_APPLICATION_FAULT_NULL_POINTER_READ_dui70!DirectUI::Element::_SetValue+e
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/mstsc_exe/6_2_9200_16384/50108ae1/dui70_dll/6_2_9200_16384/50108e6a/c0000005/000027ee.htm?Retriage=1
Followup: MachineOwner
Any ideas what could be the problem and how to resolve this?Further proof it's something with credentials/authentication. I found a valid workaround, but I think this one's on Microsoft to actually fix.
I opened up Remote Desktop Connection, put in my username and clicked the Save Credentials box. Then I edited all the other settings. Saved the RDP connection to my desktop. Then I edited it with notepad, and added the password value. I found a blog that
provides a program that'll hash the password for you. I used it so I can say its safe:
http://www.remkoweijnen.nl/blog/2007/10/18/how-rdp-passwords-are-encrypted/
I put the hashed password in, saved the file. Then used it to connect and it worked. So by bypassing RDP having to ask for credentials, it didn't crash since it doesn't ask. Kind of inconvenient if you have many computers you have to connect in to. But for
those in a bind this will work for you.
This one worked for me, no update or installation of software before it broke, but had a "wife-poweroutage" (cable taken out) I'm just not in the mood to reinstall for this. But the above fixed it for me. Thank you! -
SSRS 2012 with SharePoint 2010: Unable to connect to the remote server
We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to connect to a remote database in a lan??
Hey guys......! I need to connect to a remote msaccess database in a lan and import its data into my mysql database.I know how to connect to a msaccess database using ODBC.But I don't know how to connect to a remote database without creating dsn in the machine where database is.One thing more...I want to know, how can I import data into my mysql database?? Is there any query for that or simply I have to select data from msaccess database and insert into tables of my database??Please, send me the source code in the forum itself and explain also.This is the last feature of my project.So I need to do it as soon as possible.
If the mdb file in LAN, Just map the network drive.[Windows Explorer/Tools/Map Network Drive] in your system from which we need to access the remote mdb. Then go to ODBC Data Source Admin.. and create a new data source[Microsoft Access Driver] . After clicking the Select button, you will find a Network Drive will be visible on your Drives drop down. Select the map Drive, If not visible then just click the Network button there and map the network path where the mdb files reside. And use the JdbdOdbcDriver class to connect from java.
-
Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Launcher Service Event ID: 6102Date: 11/27/2007Time: 8:22:17 AMUser: N/AComputer: MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog -
JMS - Unable to connect to a remote server
Hi All
I am trying to point my WL7.0 to a JMS QUEUE on ORACLE FUSION WL10.3
I am getting the following error message on myserver.log: (I deleted the port and ip)
<Unable to connect to a remote server on address ### and port ###
with protocol t3. The Exception is java.net.ConnectException: Connection refused>
I have seen a post that implied that there is a bug in WL7.0 , but I am not sure that this is the case.
When the JMS queues are on the same server .i.e WL7.0 to WL7.0 it is fine.
Can anyone help ?There could be compatibility issues. Refer to "WebLogic Server Compatibility".
Link: [http://download.oracle.com/docs/cd/E12839_01/web.1111/e14529/compatibility.htm#INRMP118]
Are you using a JMS bridge between the two domains?
Edited by: Manish Chellappan on Sep 3, 2009 3:35 PM
Maybe you are looking for
-
HT204053 can I set up 2 separate icloud accounts on one computer
Can I use 2 apple IDs linked to two sepeare iClouds on a single computer?
-
I had Premier pro given me by the college I attend and do no use wi fi and do not use cloud. My laptop completely died and will be sent back to Apple for exchange. How can I reinstall Premier Pro on a new Apple computer since the old one is completly
-
Buying Advice Needed! What set-up for 1080P?
Hi. I need some insight from you actual users out there. I am about to upgrade from my nearly 3-year old iMac (which was top of the line at the time). The vast majority of my usage will be for general computing work. I generally keep a lot of applica
-
S Drive does NOT return to navigate
Hi All, While trying out S Voice "Drive", I get the following bahaviour. If I am navigating, and then I get a call or text, the screen displays whatever necessary to handle the call or text. So far so good. But now when you complete the call or
-
Export iso master from DVDSP for duplication
How do I export iso's from DVDSP that I can use for duplication purposes without having to convert img's one at a time within Disk Utility?