Connecting to exchange server via web interface?

Employer's exchange server has IMAP disabled and IT will not consider adding activesync for iPhone 2.0. Using the web interface via Safari is way too hard on an iPhone to be practical except in emergencies.
Question: The new version of Entourage allows for retrieval and sync through a connection to the exchange web interface. It behaves just like it's connected directly to the exchange server, but is hitting exchange's web server.
Is there anything like this for iPhone? Any way to retrieve mail into the native mail application (rather than web app) by polling the exchange web server?

A few things. Neither will give you the functionality you seem to be after.
1) Use Exchange OMA service (text based view via web) very quick compared to the full image web based application. Has read/write functionality but you are not going to want to write an email via this.
2) Outlook 2007 supports http: access. You could use that to pull the data from your work account to say a home PC and sync your iPhone (albeit once a day).
3) Ask them to install iTunes 7.7 on your work PC so you can sync (I think I know how this would go down in a company )

Similar Messages

Connect my Exchange server via Wifi and EA6500

Hello, I have a problem. Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems. My old router, a Dlink dir655, never had this problems. Can anyone help me?

Make sure that you have replicated the settings of your old router to the settings of the new router and then try also to isolate this problem by using a laptop computer and check if it will work. The purpose of using a laptop is order for you to isolate if the problem is with the router’s firmware. Check if opening port 443 on your router will be able to fix this issue. You can also check the links below for further information about this concern.
http://community.spiceworks.com/topic/205984-unable-to-connect-to-exchange-server-from-mobile-device...
https://discussions.apple.com/thread/3413395?start=15&tstart=0

[SOLVED] Connect to Exchange Server via Thunderbird WITHOUT ExQuilla

I'm a free software kinda guy, so it's painful enough to be forced to use an Exchange server for mail at work. I used the 60-day ExQuila trial for Thunderbird, and it worked great, but I'm not about to put money toward a project that goes directly against my wishes.
So, I tried using DavMail (the AUR package), and it was able to connect to the server, but it denied my login credentials (credentials that were accepted when I attempted using the Outlook web client).
Is there a reliable way to connect to Exchange using Thunderbird (or another client on Arch) without spending money?
Preferably, I use as few extensions as possible and get to stick with Thunderbird as my client.
Last edited by 2mac (2014-04-16 17:08:48)

Couldn't stick with Thunderbird.
The 3.12 update to evolution-mapi on the AUR works with the Evolution mail client, though, and I'm really happy with the results.
Evolution isn't as bloated as Thunderbird.

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

Outlook Mac Loses Connection to Exchange Server

Hi All,
I've had this problem pretty since deployment a couple of weeks ago, so I'm hoping some one can point me in the right direction. I'm running Exchange 2013 on a Server 2012 Standard box with the DC running on a different box, every thing up to date.
Mac clients running Outlook 2011 (14.4.2).
Periodically throughout the day, Outlook loses connection to Exchange server. After several minutes, it will connect back up, and seems to operate normally. During the down time, I am able to connect to OWA, and ActiveSync seems to work as well.
If I run the Remote Connectivity Analyzer while Outlook is responding, I get no errors and the "Connectivity Test Successful" message. However, if I run it while Outlook is NOT responding, I get the following:
Exchange Web Services synchronization, notification, availability, and Automatic Replies.
Not all tests of Exchange Web Services tasks completed.
Creating a temporary folder to perform synchronization tests.
Failed to create temporary folder for performing tests.
Exception details:
Message: The request failed. The operation has timed out
Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException
Stack trace:
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet)
at Microsoft.Exchange.Tools.ExRca.Tests.GetOrCreateSyncFolderTest.PerformTestReally()
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Elapsed Time: 100141 ms.
Nothing I've attempted to do so far as had any meaningful impact, and I am fairly new to Exchange.
Following the adice I've seen online so far, I've:
I've made sure the auto discover in DNS points to the Exchange server.
I've disable auto-discover on the client, manually adding accounts, tried using their FQDN, local IP, LAN IP.
I've made exceptions to the proxie on the client.
Just not sure where to look next? Appreciate any advice out there.
Thanks,
Michael

Hi,
Before we go further, I'd like to confirm if your Outlook clients can work well when your Outlook MAC clients come across the issue.
If the issue only happens on your Outlook MAC clients, we can check the IIS log and confirm if there is any error releted to EWS. And you can recreate your EWS virtual directory to have a test.
Thanks,
Angela Shi
TechNet Community Support

Mountain Lion calendar and notes sync problems with exchange server via WLAN

After upgrading to Mountain Lion calendar and notes do not sync anymore with my exchange server via WLAN. There are no syncing problems via ethernet if WLAN is deactivated. Mail works fine with both connection types. Similar problems known? Solutions?
Thanks for any ideas.

Exact same issue ... cropped up in the past 2 weeks. Constantly syncing and re syncing. Watching calendar events show up and disappear. Tried all the normal stuff including deleting and re setting up the entire acct ... no luck. It built out the whole calendar correctly ( from what I could tell) and then started to sync again and appointments randomly appeared and disappeared .....

External Clients cannot connect to Exchange Server

Hello all:
My external clients using outlook cannot connect to Exchange Server 2013. We have on-presmise version updated to Cu3 and after the Cu3 update we lost connectivity with Outlook clients. Many of the settings in IIS were changed after the Cu3 update,
I noticed after my http->https redirect was not applied anymore to the default website. Here is my Get-OutlookAnywhere results:
RunspaceId : 6379fab1-f692-484f-8118-99e48330d4c4
ServerName : EXCHSERV
SSLOffloading : True
ExternalHostname : mail.domain.com
InternalHostname : mail.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHSERV.domain.com/W3SVC/1/ROOT/Rpc
Path : D:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHSERV
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=EXCHSERV,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : EXCHSERV\Rpc (Default Web Site)
Guid : 596ed7a1-ceec-4a36-9cbc-617ac5214463
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/23/2013 2:20:41 AM
WhenCreated : 11/25/2013 2:51:36 PM
WhenChangedUTC : 12/23/2013 7:20:41 AM
WhenCreatedUTC : 11/25/2013 7:51:36 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain.com
IsValid : True
ObjectState : Changed
Thanks in advance

Hi,
According to your description, users cannot connect to Exchange server 2013 both internal and external.
Please run Test E-mail AutoConfiguration in Outlook to check your autodiscover service. Also
reset your Exchange virtual directory to connect correctly. If the issue still continues after all configurations are setting properly, collect some Event logs would be helpful.
If there is any question, please post the results here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Outlook connection to exchange server problem

We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried on other
workstations) will fail to auto discover, fail to connect to exchange even with manual settings. I cant find anything obvious in Group policy.
The server is setup with the latest 2013 Group policy templates with office 2013 templates
Users not logged in with the new AD server can connect to exchange
Users not logged into the domain can access exchange server
My feeling is its a local setting that is missing or needs to be changed in Group Policy but i am at a loss as to what it could be
I have disabled roaming profiles too and it makes no difference.
Any help would be greatly appreciated.
Steve

Hi,
Sorry for my delay. According to your description, I summarize your issue to the following points:
1. No problem when the user logs in Outlook with a local computer account in Cached mode.
2. Can’t connect to Exchange from an cache mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
3. Can connect to Exchange from an online mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
It is right? If I misunderstand, please feel free to point it out. Additionally, I noticed that the server is setup with the latest 2013 Group policy templates with office 2013 templates. Please confirm
if the Outlook cache mode is disabled by OTC or GPO. If there is following registry key applied on the machine:
Software\Microsoft\Office\15.0\Outlook\Cached Mode
Meanwhile, please try to install an Outlook 2013 with a fresh ISO file(Don’t use any template such as OCT template), see if the Cached mode Outlook can connect to Exchange server.
Waiting for your updates.
Regards,
Winnie Liang
TechNet Community Support

Problem in connecting to exchange server

I have generated a certificate as specified in the link http://www.dylanbeattie.net/docs/openssl_iis_ssl_howto.html. It generates an X.509 certificate. I installed this certificate on pop3 server on Microsoft exchange server. I also installed the certificate on client m/c. On client m/c, a Java application is running, which tries to read mails from exchange server using SSL. But this exception occurs when I run my java application:
javax.mail.MessagingException: Connect failed;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
at javax.mail.Service.connect(Service.java:234)
at ci.cryopull.core.PullAction.execute(Unknown Source)
at ci.cryopull.core.PullAgent.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
It seems I am unable to connect to exchange server using this certificate. While I also tried a free trial certificate from thawte, that worked fine. Could u help resolving my problem?
Thanks

Peddard, you will have to be more specific on your settings. It's important to note that the iPhone's host name entry must resolve both internally and externally if it's going to work correctly. So, on your internal DNS server, you must make a mail entry with the same name as what you are publishing externally. In my case, mail.domainname.com is registered on our external DNS server with a public IP address. On the internal DNS server, mail.domainname.com registers to a 192.168.x.x address.
However, you can find in another post that in my situation, the iPhone would not work correctly on our LAN. It worked everywhere else but the issue seems to be that when on the Edge network and the LAN, there is conflicting DNS resolution. This was intermittent and unreliable at best.
Our workaround was to create a second network, simply wirelessly with a couple of Airport Extreme Base stations on a separate external IP address. Now, DNS resolved to the external address and it works like a charm. Not a fix, but a workaround.
JD

SAP PI Connection Microsoft Exchange Server (Scenario Mail -- SAP PI -- File)

Hi experts,
we want to connect Microsoft Exchange Server to SAP PI. POP3 and IMAP4 is not allowed on mail server side.
But the standard mail adapter in SAP PI (configured as sender communication channel) only works with POP3 and IMAP4.
Can anyone help me to solve this problem
Thank you for your help.
Mario

Hi Priyadshini,
The way that you have developed your java program can be different that the way that SAP did it. With pop3 in PI, as far as i know, it is no possible to change the read/delete properties that the mail server has by default, as Amit and Ilya mentioned you should try with the imap solution or to talk to the mail server administrators.
Are you sure that the messages is being deleted?, have you checked other mail folders in the user account?, may be the message is being moved.
Regards.

Can't connect to Report Server via Management Studio

Hi,
I have a local installation of SQL Server 2005 (Developer Edition) on XP Professional SP2, with Reporting Services, Integration Services, and Analysis Server installed.
I can connect to Integration Services and Analysis Server via the SQL Server Management Studio, but not to the Report Server. I can access and use the Report Server installation via http://localhost/Reports and http://localhost/ReportServer, and everything checks out on the Reporting Services Configuration tool, so the server appears to be working fine.
I've uninstalled/re-formatted/reinstalled the services (with all default options, and services running as "Local Service"), but always end up with the following error when connecting to Report Server via Management Studio:
The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------
Program Location:
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
   at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Any hints would be appreciated...
Thanks,
/vijayan

Here is the report server log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>AUS Eastern Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\LogFiles\ReportServerService__06_22_2006_09_34_56.log</Path>
<SystemName>COUNTD2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Reporting Services starting SKU: Enterprise
ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Evaluation copy: 0 days left
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Database Cleanup (NT Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Execution Log Entry Expiration timer enabled: Next Event: 59102 seconds. Cycle: 86400 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: SQM timer timer enabled: Next Event: 62702 seconds. Cycle: 86400 seconds
ReportingServicesService!library!8!22/06/06-09:34:58:: i INFO: Catalog SQL Server Edition = Enterprise
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Initializing crypto as user: OBJECTIVEWARE\s.count
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Exporting public key
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Performing sku validation
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Importing existing encryption key
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: EventPolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: NotificationPolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: SchedulePolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: UpgradePolling polling service started
ReportingServicesService!dbpolling!b!22/06/06-09:34:58:: NotificationPolling heartbeat thread started.
ReportingServicesService!dbpolling!a!22/06/06-09:34:58:: EventPolling heartbeat thread started.
ReportingServicesService!dbpolling!c!22/06/06-09:34:58:: Polling started
Here is the IIS log:
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 00:00:21
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 00:00:21 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 03:50:53
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 03:50:53 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 07:51:41
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 07:51:41 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 23:38:59
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 23:38:59 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:39:16 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:40:13 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:41:26 W3SVC1 203.166.122.177 GET /Reports/home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:41:28 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports/Home.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:43:53 W3SVC1 203.166.122.177 GET /reports/Pages/Folder.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
Thanks,
Roshan.

Cannot connect to Mavericks server via AFP

Yesterday we had our server rebuilt. I have added a couple of users and a group with read/write access.
I can only connect to volumes via SMB://10.XXX.XXX.XX
When I try AFP://10.XXX.XXX.XX
I get the following error:
‘There was a problem connecting to the
server "10.108.172.134".
Check the server name or IP address, and then try
again. If you contintJe to have problems. contact your
system administrator.'
With SMB connection I am getting errors trying to copy files to the server.
The error is:
‘The Finder can’t complete the operation because some data in “e.g File” can’t be read or written.
(Error code -36)’
Any ideas guys?
I can’t get hold of our IT guy today.
Mac Pro 2 x 2.8 GHz Quad-Core Intel Xeon
OSX 10.9.5
Server 3.2.2

Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb

Cannot connect to SGD server via proxy

Hello
We have a recently installed SGD server running.
Some clients have been setup today with accounts to access it but none of them can get on at the moment. The error message presented is as follows:
Cannot connect to the server sgd.ourdomain.co.uk:443
The HTTP proxy "NTLM" at devicename:8080 failed to connect to the server sgd.ourdomain.co.uk:443
The following response was returned:
HTTP/1.1 403 Forbidden
Clearly there's a proxy/firewall getting in the way.
Client has tried to connect from a network that is behind a different firewall and has been sucessful.
I'm hoping to get further details on the proxy/firewall setup but this could take a while.
Has anyone encountered this previously and if so, can any solutions be suggested.
Thanks,
Rob

Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb

Writing client app to connect to Exchange Server 2013 and set OOF for users on vacation

I am coding an C# app that should connect to Exchange Server 2013 on-premise (Servers Location is not in our Company). I`ve got an account (User and Pass) with readonly admin-rights for now and want to read and set OutOfOffice Objects for other users. I
decide to use EWS Managed API over Autodiscovery but I am bit confuse how
I tried to connect with "service.UseDefaultCredentials = true" and read contacts -> this code works:
try
            ExchangeService _service
= new ExchangeService(ExchangeVersion.Exchange2013_SP1);
            _service.Credentials
= new WebCredentials("service.exchange",
"1234", "domain");
            _service.TraceEnabled
= true;
            _service.TraceFlags
= TraceFlags.All; _service.UseDefaultCredentials
= true;
            _service.AutodiscoverUrl("[email protected]",
RedirectionUrlValidationCallback);
            foreach
(Contact contact in _service.FindItems(WellKnownFolderName.Contacts,
new ItemView(2)))
var test = contact;
        catch
(Exception exception)
            Console.WriteLine(exception);
After that I tried the same with _service.UseDefaultCredentials = false; got error -> "The Autodiscover service couldn't be located." I am not shure if this "direct log on" is the right way, On msdn I've read about "delegate access"
and "Impersonation" (NTLM and Basic Authentication) I'am a bit confused. Can anybody help me?

hi,
when you set a credential, you don't have to set the UseDefaultCredentials property (it is already updated).
For autodiscover, you should try to set the property EnableScpLookup to True if you are in the Exchange domain or it is known by the current domain.
Autodiscover uses a domain query (through Active Directory) and/or a dns query (this requires a DNS register for autodiscover.domain.net) to determine the access to the autodiscover service URI.
Regards,
Désiré GOVIN Refresh IT Solutions

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

Connecting to exchange server via web interface?

Similar Messages

Maybe you are looking for