Connecting to Exchange works with Intel, but not PPC machines????

I work in an office with several Macs, Intel and PPC. Using Mail.app, we can connect fine to our exchange server with the Intel boxes, but the PPC machines have problems. Connection Doctor actually shows that you are connected, but you don't see anything in the Mail.app UI. The mailbox is grayed out. And if you try sending a message out anyway, it does go out and can be viewed via Web Access. The Mail.app configuration is identical, so the only differences I see are Intel vs. PPC and the version of Mail on Intel is slightly newer. Intel has Mail 2.1.1 (252.3) whereas the PPC machines have Mail 2.1 (252/252.2). All machines run 10.4.8.
Any thoughts?

Hey man I figured it out. If you have too many emails in your inbox its causing the server to timeout or something.
The solution is to move all the emails from your inbox to a temporary folder. Then move back only what you need. Within five minutes push was working for me again and my battery problem went away because it wasn't constantly trying to pull down email.

Similar Messages

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

Make sure you are using the correct user name / password.
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message

Better touch tool works with touchpad but not magic trackpad, better touch tool works with touchpad but not magic trackpad

better touch tool gestures works with touchpad but not magic trackpad, why please ?

this was an error problem solved

Ichat works with wireless, but not ethernet

Just moved into new office and bought new iMac. I can get internet with ethernet or wireless, but iChat works only over wireless. This is true with my intel Macbook as well. Is this a port or firewall problem, and if so, why would wireless work, but not ethernet?
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)

Who is supplying the wireless internet connection?
Who is supplying the wired internet connection? If
it's two different entities, the IT Secret Police may
be blocking ports on the wired side.
TimeWarner comes in from the outside, but a private contractor is involved in the setup of the wireless which is connected to the TW modem. But if the wireless goes into the TW cable, why does it work as wireless, but not directly plugged in? It is as if converting the signal to wireless cures the problem.
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)

New GE70, killer e2200 working with WIFI but not by cable

Hi!
I bought a GE70 today and noticed that I can connect to the internet through WiFi but not with a network cable.
I've tried to upgrade drivers and such, but it still doesn't work. I've no router in this apartment so I'm using WiFi through my old laptop so I can figure this thing out.
What I've done so far:
1. Installed the drivers on the CD which I got with the computer. Although when on BigFoot LAN Driver, it says that I've already another version installed and need to uninstall it).
2. Downloaded the drivers for the network card through MSI homepage and installed. Funny thing, after that not even the WiFi worked.
3. Tried to unplug the power for the modem and wait a while and then plug it back in but that didn't work either.
4. Figured it might've been something wrong with windows so I did a factory recovery but that didn't seem to help either.
All I get when I plug the cable in, I get the "Limited access" (yellow mark) on the LAN icon down in the right side corner.
Has anyone else gotten this problem?
Kind regards,
W

Quote from: Wingu on 20-May-13, 08:15:26
Thank you for your reply.
I think I've got it sorted now. I tried another network cable and it works now.
It's weird however since the cable I've used for about a month now works with my old computer (Win7) but not with my new computer.
Gonna go to an electronic store later and see if it will make any difference if I buy a new cable.
Does the killer e2200 only accept certain sort of network cables?
Thanks again.
W
It really should work with any network cable to be honest, as long as it's not a PATCH cable. Patch cables are wired slightly differently, but they are rare anymore.

Strange on - Wake on LAN (WOL) works with Win2K3, but not Windows 7

Hi,
I have a PC that I originally had Windows 2003 on. With Win2K3, I can send a wakeonlan (magic) packet (WOL) and get it to power on remotely from my home network/LAN.
I just installed Windows 7 Ultimate 64-bit, in a dual-boot configuration, i.e., so I can boot the machine to either Windows 7 Ultimate 64-bit or Win2K3.
As mentioned, I can power the machine up remotely (from my home network/LAN), but if I've LAST booted into Win7, then shutdown, it doesn't respond to the WOL packet.
I've confirmed that if I boot into Win2K3, then shutdown, the WOL works fine.
I have another PC that has both Win2K3 and Windows 7 (also dual boot), and that works fine with WOL.
One difference between the one that doesn't work vs. the one that works is that the one that works is a machine that I just built a couple of weeks ago, which uses an MSI 880gm-E43 motherboard.
The one that doesn't work also has an MSI motherboard, but it's an older one, an MSI K9NBPM2-FID.
I've cross-checked the various Windows power management settings between the one that works, and the one that doesn't work, but I just can't get WOL to work with Win7 on that older machine. I've even turned the Windows Firewall off completely on the machine where WOL isn't working, but no matter what I've tried thus far, no joy :(...
The only thing that I can think of is that the network card driver (it's the MS one, from the Win7 distribution) might not work with WOL, but I've checked, and it's the latest driver from MS (Nvidia Nforce Networking Controller - 10/17/2008 - 1.0.1.211), and MSI doesn't have a specific Win7 64-bit driver for this motherboard.
So, I was wondering if anyone has any ideas about this?
Is there some registry setting or something that might allow WOL to work?
Thanks in advance,
Jim

Hi,
Unbelievable!
Just for the record, I got WOL working with the older machine, JUST after I posted the original msg.
Here's what I did:
- I was in Device Manager, and did Update Driver, but
- I selected to let me choose, and then I checked the "Show Compatible devices" checkbox
Then, a 2nd, older (10/6/2006 - 6.2.0.127) driver appeared, so I figured, "what the heck?" and tried that. I then shut the machine down, and sent a WOL packet to it, and kind of forgot about it (machines in a different room), but a few minutes later "bing!", the machine had powered up and booted into Win7!!
Anyway, as I said, for the record, and hope that this helps someone in the future.
Jim

XPath query works with CLOB but not with object relational

hi all
i have the following queries,the XQuery work with all, but XPath queries work with XMLType CLOB and Binary XML, but they do not work with XMLType as Object relational,
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "L.Cohen"]/films/film[position()=2]/t')
from xorm;
they shows this message
ORA-00932: inconsistent datatypes: expectd SYSTEM.name683_COLL got CHAR
thanks

Hi Marco
fisrt here is my RO
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL=>'http://......../ORMovies.xsd',
SCHEMADOC=>bfilename('DB','Movies.xsd'),
LOCAL =>false,
GENTYPES=>true,
GENTABLES=>FALSE,
CSID=>nls_charset_id('AL32UTF8'));
END;
create table XORM of xmltype
xmltype store as object relational
XMLSCHEMA "http://......../ORMovies.xsd"
ELEMENT "movies";
INSERT INTO XORM
VALUES(XMLType(BFILENAME('DB','ORMovies.xml'),nls_charset_id('AL32UTF8')));
here the XQuery format that work fine with the OR
A/D
select XMLQuery ('for $a in movies/directorfilms/films/film
          where $a/studios/studio = "Gaumont"
          return $a'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
child element query
select XMLQuery ('for $a in movies/directorfilms/director[dirname = "Feyder"]
          let $b:=$a/../films/film[position()=2]
          return $b/t'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
here is the XPath format which doesn't work
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "Feyder"]/films/film[position()=2]/t')
from xorm;
by the way all queries work fine with the CLOB or Binary XML
many thanx Marco

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

When I click on pictures in eBay or Facebook. It will not show the pictures....Will work with IE but not FF

When I click on pictures on eBay and Facebook...it will not show pictures/enlargements...just blanks....will work with IE. NOT ff

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Airtunes works with music but not with tv show

I have an AE wired to my to my A/V receiver and I play itunes music wirelessly thru the AE and it works fine. Problem: I downloaded a TV show and the audio will not stream via the AE and will only play thru the computer. The video works fine fine in both cases as I have it hooked to my TV via my A/V receiver from my Macbook display port. I am running itunes 8.1 and my AE is on firmware version 7.4.1.
Anyone know why the songs audio works and the tv show audio does not?

Thanks for that fast and definitely a fix at this time. It also works with internet radio, not just the iTunes radio stations. Now my wife will be able to listen to KFOG from San Francisco and I can actually hear my movies, since I am using a MacBook and it is just not loud enough.
Thanks Again Andy.
I love these forums.

Madison Square Garden web site opens but when I click on view all concerts tab at the MSG site it does not open. It works with AOL but not Firefox

I go to '''www.thegarden.com''' I click on the tab '''View Full Calendar'''. It does not open. It works on AOL but not Firefox. And for some reason it also does not work when I use Internet Explorer. The majority of times when I click on that tab (in Firefox) it does not work. On a rare occasion it will open. I am not doing anything differently either time.
Any help would be greatly appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Set up synch with Exchange - works in Entourage but not in Mail!

Hi all,
In Entourage I've been able to connect to my Exchange 2003 server at the office. Apart from the certificate warning it works just ok.
But now, how do I set Mail to accept the same connection?
In other words which settings from Entourage go where in the Mail account settings?
So where's Mail's equivalent of:
- Domain
- The DAV 443 port setting
etc
Mail just keeps reporting that it cannot find the server.
Marco

Entourage uses a connection to Exchange via settings established under OWA (Outlook Web Access). ActiveSync is different than that and so is Blackberry access. Each company can set up ActiveSync differently, so I can't tell you what to configure, but generally you should be able to put in your OWA (Entourage) settings and set up ActiveSync with very minor modifications. For example, your OWA (Entourage) server might be: https://exchange.somecompany.com/owa or similar. It is likely that your IT folks set up ActiveSync access on the same server. In that case, the server entry for the iPhone might be simply: exchange.somecompany.com
Keep in mind that Exchange 2007 has a feature where the email address is used to "find" the server, but if your company is running Exchange 2003, that feature is not available. This is likely confusing some people on how to set things up, too.
OWA (Outlook Web Access), OMA (Outlook Mobile Access) and (EAS) Exchange ActiveSync are all different services. For the iPhone, we will configure for EAS even if all of these products are running on the same server or not.
The other thing that I note in some posts is that people are having issues with certificates. If the company signs their own certificates, then that certificate will need to be installed on the iPhone. If the certificate is purchased from EnTrust, Verisign or other certificate authority (CA), then the iPhone will likely not need the company certificate imported to the device.
I hope this helps someone.
Minor edit made by: LenH

Itunes doesn't seem to synch "wirelessly" with my iphone. It seems to work with emails but not photos / videos I've taken on my phone. Also, there is no "device" listed on itunes menu bar, only when connected via cables

My computer / iTunes is set up correctly for wireless (account info. all good), and emial is synched wirelessly. BUT not photos / videos or songs. I seem to have to plug my iPhone into my computer for iTunes to recognize my device. Shouldn't iTunes recognize my iphone wirelessly? For example, I have read that "device" should show up in menu bar on iTunes but it doesn't unless I'm cabled in.
Also, when I go to my iPhone to "synch wirelessly with iTunes", the button / tab doesn't light up for me to chose and tells me will synch when "smith - laptop" is available.....
This is my first iPhone, and just got it so may be user error.....
thanks

Did you build Elsa with this package from AUR: elsa-svn-arch
The way your elsa.conf looks like indicates to me that you have not.
Please use the package because you are also missing pam-files.

New shuffle works with Windows but not with Mac

Just got a new 2nd gen shuffle. Initially it was formatted as Fat32 per Disk Utility on Mac. I reformatted to Mac OS (journaled). iTunes was recognizing the new shuffle on the mac and I created a playlist that showed it took up disk space in the "summary" tab. However nothing played on the shuffle when I disconnected it. I was trying to update the software but that function is greyed out. I tried to click "enable disc use" and when I applied it, it says it can't find the ipod. It wont let me update anything. The only thing I can do is create a playlist that the summary says is on the ipod but it doesnt play.
I then connected it to my Windows XP machine and it asked me to reformat the drive, which I did, then everything worked flawlessly. I would really prefer to download things to the shuffle from my Mac than Windows XP but it just won't let me. I tried using "iPod Updater" and the most recent one from the list was 03/2006 and that didn't help anyhting. "iPod Reset Utility" would not recognize the ipod to reset it even after I sucessfully set it to Mac OS journaled in Disk Utility.
I am very frustrated. This also happened to my Nano I purchased a few months ago and I have to organize it on the PC as well.
I am running iTunes 7.2

I have exactly the same problem with my two
computers, both of which are Macs. The shuffle is
recognised on one, but not the other.
Here's a screenshot of iTunes ->
http://www.simongbrown.com/blog/images/2007/shuffle-no
t-recognised.png
BTW, I also have an older white iPod in use on the
Mac that doesn't work.
I've tried a few things (including running iTunes
under a different user account, reinstalling iTunes)
but nothing seems to help. The only thing left to do
is reinstall the OS, but that sounds a little extreme!
That's way too extreme... Use the shuffle Reset Utility.
http://www.apple.com/support/downloads/ipodresetutility10formac.html

Flash Player works with IE7 but not Firefox 2.0.0.4

ahhhhhhhhhhhhhhhh HELP!!!!!!!!!!!!!!!!!!!!!!!
Using Firefox
Plugin icon (like part of a puzzle) required appears at top
of page with message "Click here to download plugin" when I go to
http://www.mclaren.com/ Most of
the page appears but top does not.
Try to download Adobe Flash Player Plugin Setup
Get the following message
'Adobe Flash Player Plugin Setup
The following applications need to be closed before the Adobe
Flash Player Plugin can be installed:
Firefox'
So I closed all programs including Firefox
Opened Internet Explorer and went to site
http://www.mclaren.com/ where
Plugin icon (like part of puzzle) appeared under Firefox. The
Plugin icon (like part of a puzzle) does not appear but a changing
graphic appears
I opened the list of installed programs - Control
Panel/Uninstall
I see that Adobe Flash Player ActiveX as being installed on
16/06/07 but the file size in blank
Using AVG 7.5 anti-virus so Norton Anti-virus is not on the
computer any longer except still have to uninstall Live Update 3.2
which would not install with Norton Anti-virus and requires a
special uninstall program
What do I need to do to get Flash Player to run when I am
using the Firefox browser?
Windows Vista Home Premium Version/Build 6.0 on HP Pavillion
dv6000 (RU698UA#ABL)
Intel T-2250 1.73GHz
BIOS Version: F.12 19/12/2006 Hewlett-Packard
RAM 1014 MB
32 bit Operating System
Firefox 2.0.0.4
Windows Internet Explorer 7 Version 7.0.6000.16473 Update
Version 0

Not works means you get a blank screen as the webpage; works is when you have to allow Flash Player to run "outside of protected" mode several times to get the website to come up.
Try www.wzeconsulting.com on the three browsers to see what I mean. wzeconsulting.com is not some spam site, it is the site for a business in China that I work with.
Thanks,

Connecting to Exchange works with Intel, but not PPC machines????

Similar Messages

Maybe you are looking for