Connecting to Internet from Windows XP

After updating from Leopard (which shipped with my MacBook 4.1) to Snow Leopard, I am unable to connect to the internet while using the Windows side of my computer. Suggestions?

Post where all the Windows experts are.
https://discussions.apple.com/community/windows_software

Similar Messages

Share my WiFi internet (from Windows 10 TP) to Hyper-V

Hi,
Since 1 month I'm using Windows 10 Technical Preview on my laptop.
Before I used Windows 8.1. There I had a Hyper-V. Thank of this blog(http://blog.credera.com/technology-insights/microsoft-solutions/using-your-windows-8-wireless-connection-inside-hyper-v/) I share the Internet of my Laptop to Hyper-V
I copy the hard disk of VM (with Windows Server) which I create at Windows 8.1 and I'm using it in Windows 10. The VM is working but I can't share the WiFi internet to it. I tried the manual from blog but without success.
After that I try to create a External Virtual switch. In this way the internet is not working on the Laptop and on the VM.
--------------------------------------EDIT----------------------------------------
Here is what I'm doing with all settings:
1. Enter to "Hyper-V Manager" > Select "Virtual Switch Manager" > "New virtual network switch" > "Internal" >"Create Virtual Switch" > Set name to "My Virtual switch" > Click
"OK"
2. Open "Network connection"> Select my Wi-Fi adapter and click on "Properties" > Open "Sharing" tab > Check checkbox "Allow other users to connect through this computer's Internet connection" > Select
from dropdown list "vEthernet (My Virtual switch)" > click "OK"
3. Now on my Wi-Fi Adapter I can see "Shared"
4. In "Network and Sharing Center", I have my Wi-Fi Adapter with "Access type: Internet" and "vEthernet (My Virtual switch)" with "Access type: No network access"
4.1 In "vEthernet (My Virtual switch)" Properties: "Hyper-V extensible Virtual Switch" and "Microsoft Network Adapter Multiplexor Protocol" are unchecked. The rest are checked. In "IPv4" is selected "Use
the following IP address" but they are blank. The same with DNS server addresses
5. In "Hyper-v Manager" I'm selecting my VM and opening "Settings"
5.1. "Add Hardware" > "Legacy Network Adapter" > "Add" > In "Virtual Switch" dropdown I select "My Virtual switch" (The "Enable virtual LAN identification" checkbox is unchecked ) > "OK"
6. Now I'm starting my virtual machine and I don't have access to Internet
I see that MAC of my "vEthernet (My Virtual switch)" is different than this of my Adapter in VM
Do you have some idea how can I share the WiFi Internet from Windows 10 Technical Preview to Hyper-V? It will be brilliant if I can have Internet on both machines?

On Tue, 20 Jan 2015 09:41:59 +0000, ko5monaft wrote:
I'm using client version of Windows 10.
Yesterday this question was in Hyper-V. I don't know why it's now in "Windows Server Technical Preview"
A Hyper-V moderator moved your question and has moved it to the wrong
forum. Although your question is about Hyper-V the Hyper-V forum is only
for released versions of Hyper-V. Since you're asking a question about
Client Hyper-V on Windows 10 then the correct forum to move it to would
have been one of the client Windows 10 forums.
Paul Adare - FIM CM MVP
Fachbegriffe der Informatik, Pull:
Das Notebook ruckartig am Kabel vom Tisch ziehen.
http://www-605.ibm.com/misc_includes/en_SG/drop_test.pdf

How connect to internet from domain created in Hyper-V

How connect to internet from domain created in Hyper-V
Host = Win8 Pro
Connection to internet done using WI-FI
Internet seeting
Home router with secury connection -> cable internet
Network name set on router = "Mtl2014"
Host setting
TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
Obtain address automaticly
Obtain DNS server address automaticly
I can connect and browse internet from host
In Hyper-V
1.created 2 private virtual switches SW1 and SW2
2.installed 2 VM HA1 and DC with Win2012 server eval edition
3.assigned stations HA1 and DC to virtual switch SW1
on Host
WI-FI network connection
Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
in Hyper-V
choose Activate windows on HA1 and DC
open browser on HA1 and DC ,
At this point I am able to see and browse and search in google from HA1 and DC
In Hyper-V
assined virtual switch SW2 to DC and HA1
created Domain controler on DC and domain Alex1.com
TCP/IPv4 Seeting on DC
IP = 192.165.1.8
subnet = 255.255.255.0
default getaway = empty
Prefered DNS server = 192.165.1.8
TCP/IPv4 Seeting on HA1
IP = 192.165.1.11
subnet = 255.255.255.0
default getaway = 192.165.1.8
Prefered DNS server = 192.165.1.8
added HA1 to domain Alex1.com
Question
What seeting on SW2, DC, HA1 and Wi-FI should I change in order to have access to internet from Alex1\DC and Alex1\HA1?
I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
I plan to build 6 more Win 2012 server eval and join then to Alex1\
Thank you
Alex

I see.
1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
2. Internal doesn't allow communications with a physical network either. Only the external type does.
3/4. Your problem is not really with Hyper-V. It's with IP.
Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
use "DC" for the gateway because it's not performing routing services.
You have two choices.
One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
IP subnet with everything else on your home network.
The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
(we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

Remote access VPN clients connected to Internet from VPN

Greetings,
I need to let remote VPN clients to connect to Internet from the same ASA VPN server
" client connects to ASA through VPN tunnel from outside interface then access Internet from the same ASA from outside interface again
thanks

you'll need to configure 'same-security-traffic permit intra-interface' on the ASA .
Also, need to setup the corresponding nat statements for your clients pool range.
i.e.
global (outside) 1 interface
nat (outside) 1 access-list anyconnectacl
where anyconnectacl is the pool for your clients:
access-list anyconnectacl permit ip 172.16.1.0 255.255.255.0 any

Connect to Mac from Windows

I have three Windows systems and one Mac.
Currently, to connect to my Mac (OSX Tiger) from Windows I have to be logged into the Mac as that user on the Windows machine.
I have three users that access the Mac. All are setup on the Mac as users. All are setup on the Windows systems as users.
But if John logs into the Mac and Betty tries to access the Mac from her computer she cannot. If John tries to access the Mac from his Windows system he can.
Does anyone know how to setup the Mac so that any of the three users can connect to it from Windows regardless of who is logged in?
I tried to set the group to staff for all the users public folders but that did not help.

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

CONNECT UNIX MACHINE FROM WINDOWS USING C#

Hi all i have a requirement to connect unix machine from windows using c# code . I have the IP Address of the unix machine and the path too.I have to make a FTP using the c# code from unix to windows and vice versa . Can anybody help me out on this . It
would be great if have a solution for this .

Hi
Balamurali_Mohan,
Please refer to the similar thread
How to connect to unix server using c#
The marked answer said: Use a SSH (secure shell) client wrapper for .NET to connect to the remote UNIX machine and execute commands to run your script.
Have a look at:
http://www.codeproject.com/KB/IP/sharpssh.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

No internet connection after upgrade from windows 8 to windows 8.1

I have upgraded my operating system from windows 8 to windows 8.1, I also updated windows 8.1 after the system upgrated. I found there is no access to internet, although I have full wifi signal. I tried to conncet to the router via ethnet cable, but it still has no internet connection. However, I can see other computers at homenet via wifi. I have seen some questions in the Forum regarding wifi failure after upgrating to windows 8.1, and I tried to uninstall all my drivers (LAN and wireless) of network adapter, and re-install the latest drivers from HP website at http://support.hp.com/gb-en/drivers/selfservice/HP-Pavilion-Sleekbook-15-b000/5296234/model/5311051#Z7_3054ICK0KGTE30AQO5O3KA30R1(I tried the Ralink ones as I remembered the old drivers are Ralink), but it does not work. Please could you help?

Hi @Koala76 , Thank you for visiting the HP Support Forums and Welcome! I have read your post on your HP Pavilion Sleekbook 15-b052ea and Windows 8.1 causing issues for you when trying to connect to the wireless. Try opening Device Manager, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager. In Device Manager, locate the network adapter, and then double-click the device name. Click the Driver tab, and then uninstall everything in the list except the Realtek and the Ralink. Remove any USB devices and Ethernet cables that are connected. Restart the computer. After you restart the computer, please use the HP Support Assistant. The HP Support Assistant has a wireless connectivity troubleshooting tool inside. Here is a screen shot of the Internet and Security tool that will help you diagnose Internet Connectivity. I hope this helps! Thanks.

[solved] sharing internet from windows computer with arch laptop

Title is descriptive I think. Stuck on windows on my desktop because I did a thing and don't feel like fixing it yet
I used ICS but the laptop couldn't access the internet and I read someplace that it only works between a windows client and host, and I couldn't find how to do it between a windows host and linux client of any sort.
If it's relevant I'm using a regular yellow ethernet cable (forget which one that one is) and my desktop has a gigabit ethernet card.
Last edited by kinkinkijkin (2015-01-05 01:49:54)

If you want make your laptop as access point, then see here
Otherwise, from the Arch side, the wiki is the best place to start from.
Or see this topic is of your interests.
If these are none of your intents, please explain which is the computer and OS connected to internet and which is the computer and OS wants to access the internet.
What are the results of your trials, what steps have you done ?
More details of your doing and targetted answers will be the result.
Modern NICs don't need cross cable, the NIC will detect and self adjust the connection. If one of the two PS is less modern then you need a cross CAT5 cable.
Last edited by TheSaint (2014-12-29 02:08:37)

Can't connect to internet from my PC using Nokia N...

Hello.
I bought a Nokia N8 recently. Its awesome but I still couldn't solve this problem.
I can't connect to the internet from my PC using N8 as a modem.
When I use Ovi Suite, it says "Failed to establish a network connection".
When I use the "Conn. PC to net." mode.. the application says "Valid connection could not be found". But I'm confident my operator's plans and settings/destinations are correct as I can connect and browse the internet from the phone. (Pls still say something if applicable)
When I try to connect to the internet using Windows Network and Sharing Center, it says "A device or driver is not functioning properly" or something similar
Pls help me with this problem. Its really, really urgent
thanks

You haven't establized a connection to the network, so you can't use MS network sharing which means you are sharing the PC connection to others. What you wanted is to use the N8 modem to connect to the network.
Uninstall Ovi Suites & install PC suites for your N8. Make sure all drivers are loaded properly. Run pcsuite & just click the network menu to connect to internet. By the way what's the version of your MS OS; XPsp3, Vista or Windows 7 ?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Can't connect to internet on Windows partition

Since last week I can't connect to the Internet with Windows XP partition and BootCamp. I use DSL RCA Broadband to connect directly. I received message "No viable connection or impossible to connect"
I call my IP provider a couple of times without result. They said signal is good but I can't get a IP address.
Any ideas?
Best regards

Problem coming from Windows XP after Windows XP erased and reboot on an other partition. Problem is resolved.

Unable to Connect to Internet from OEL 5.6 for chinese language

Hi,
I've just installed OEL 5.6 for chinese language,I wasn't able to connect to internet. but for same way install OEL 5.6 for english language is OK.
who tell me why?
# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0
# cat /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=majin150
GATEWAY=192.168.100.1
ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=none
BROADCAST=192.168.100.255
HWADDR=00:0c:29:ee:8f:ae
IPADDR=192.168.100.150
NETMASK=255.255.255.0
NETWORK=192.168.100.0
ONBOOT=yes
GATEWAY=192.168.100.1
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes

I have never heard of any Linux OS geographical limitations. How did you determine that the installation using Chinese was not able to connect to the Internet. Did you properly configure DNS? Any chance of a typing mistake in the previous configuration, or perhaps temporary networking problems from you provider or network side?

HT203210 Connecting to Internet from Pro

I recently bought a Mac Pro with Lion.
I want to connect to internet through Base station from my mac. I could do it in my old macbook but I m not able to make a successful connection in my pro.
In order to make a connection, I must enter User id and Password.
How can i do it?
Step by step guide would be very help ful.

Post where all the Windows experts are.
https://discussions.apple.com/community/windows_software

Lenovo Y50 Not connecting to Internet after windows 10 update

Just as the title says.
I was able to install some windows 10 updates with wifi as my usb modem would not work
After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device manager

Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
JC

Time Capsule via Internet from Windows

Frnds,
I couldnt find solve for my problem. Could anyone help me, pls?
I have TC. It work as router. TC connect via Ethernet cable. I want to connect to it from anyplace of the world via internet and use files on it. I switched on Share files in Airport Utility. I have stat IP. All should be work. But it is not working. When i check ports(137-139, 455) then i see that ports is closed. When i try to mapping ports then i have warning message that they is using and to turn it on i need to switch off Share files.
I try to connect via FTP. I opened 21 port and it is realy open. But i still could not to connect.
One more thing - i could to connect to TC via afp:// from Macbook. But i need to connect from other places using Windows.
I NEED PROFESSIONAL HELP. All eligible information and screens im ready to provide. HELPDESK CONNECTED UP!!!
sry for my english

The TC does not offer FTP and ISP do not allow SMB connection via internet due to risk. Nor apparently does the TC allow wan connection using SMB.
So the simple answer is, you will have to figure out another way in.
http://apple.stackexchange.com/questions/3178/how-to-connect-to-an-afp-server-fr om-a-windows-pc
There are no AFP client support for windows available.
https://discussions.apple.com/thread/2627410?start=0&tstart=0
Buy a vpn router and place it infront of the TC which should be bridged.. vpn to the network and then you can access the TC.. but you should understand the TC was not made to be used as a NAS nor to serve PC's.

Connect to Mac from Windows Vista issue

Hi I want to view some files that are on my Mac from my PC (Windows Vista). Here's what I did so far: On my Mac I enabled file sharing, I selected the folders that I want to share.
Now here's the part that confuses me, it asks me to add the users to share the folder with. but do I enter the username and password for my mac or is it the username and password for my PC? What I did was add all the accounts that are on my mac.
I then went on my PC, clicked on network, I can see the mac computer, I can also see my username and folder, I click on it, I then see the drop box but when I click on it I get a network error message that says "Windows cannot access Users public folder drop box".
I don't know what setting I need to enable since I'm very new to this. I can access the files that are on my PC from my Mac just fine. but I can't access the files that are on my Mac from my PC. Do I need to create a new mac account?
I also noticed that when I click on the mac computer from my PC in Network, it doesn't ask me to enter a username and password, could that be the reason I can't connect? Please help.
Message was edited by: Stuart Lawrence

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

Connecting to Internet from Windows XP

Similar Messages

Maybe you are looking for