Connecting to internet via D-Link airplus wireless router?

Hi there,
I bought a macbook pro 17inch yesterday and love it! However, I've tried to set up wireless connection to the home network, which is a D-link wireless router "Airplus G+ 2.4GHZ wireless VPN router"
How do I go about this with the inbuilt wireless options of the macbook?
I am waiting on an airport express which came free with apple care, but that could be a couple of weeks away and I'd like internet connection via my mac before that
Any ideas on what I should be doing, information I might need to get for the router etc?
BTW - It's secured with a password which I have.

OK, open System Preferences/Network
Location: [New Location] and give it a name
Show: [Network Port Configurations] drag Airport to the top and uncheck all others
Show: [Airport]
Airport tab - set [By default join] to Preferred networks
In the pop-down select the D-Link network (and remove any others if there)
TCP/IP tab - set [Configure ipV4] to Using DHCP
Click [Apply Now] bottom right
You should get an IP number allocated by the router ...

Similar Messages

I need to know how to connect to internet using the netgear n150 wireless router

I recently signed up with comcast internet. They supplied a NETGEAR N150 wireless router. After following instructions that came with router, I still cannot use the router to connect to the internet. The computer has to be connected directly to the modem for internet access. HELP!!!!

Here are some of the recommended setting from Apple. Maybe that will help.
http://support.apple.com/kb/HT4199
Regards,
Captfred

Mac Book Pro won't connect to internet via either Ethernet or wireless

A month ago my macbook pro suddenly stops working wirelessly with my virgin media router showing it has connected but no internet access. I have a second computer so i hadn't addressed the issue untill now. On a different virgin media router at my university flat I have exactly the same issue. I can connect to the Wi-Fi but it has no internet access and an IP of 169. so it is being rejected somehow. I have tried several things but they haven't worked. I stress that the ethernet doesnt work either which is unusually of most posts on this topic. If anyone could help me that would be much appreicated.

I had the exact same problem, here is what helped me, hopefully it will help you also...
I have been using my airport disk (edge_diskgo external HD) now for about 3 weeks, it has been rock solid... until tonight after the firmware update.
My macs could not locate the airport disk, but my pc's still could.
(Maybe this was how the security problem was solved? You can no longer access the Airport disk from macs? Brilliant!)
It turns out that all I had to do on my both my macs is go to
Airport disk utility (just type that in spotlight) and check
both boxes: Automatically discover Airport Disks
Show Airport disks in menu bar
Then I went to the top right hand side of the menu bar, and clicked on the airport disk utility icon, clicked on my basestation name and entered my basestation password.
I also had following settings in Airport Utility/Disks/File sharing:
File sharing is enabled
secure shared disks (with base station password)
Guest access (not allowed)
Share disks over ethernet wan port (checked)..
Advertise disks globally using bonjour (not checked)
My drives are back up with all of their contents, working now, we will see how they do tomorrow.
Thanks for all the help on this post, special Thanks to trevinwagner, hope this helps someone else.... its very late, Goodnight all
Here was the original post
http://discussions.apple.com/thread.jspa?threadID=875688&tstart=75

I have a Mac connected to Internet via DSL modem. Just bought iPad (today). What hardware do I need to set up wireless LAN so iPad can be used anywhere in house? Will Linksys work with Apple?

I have a Mac connected to Internet via DSL modem. Just bought an iPad2 and need to know what hardware do I need to add wireless LAN so I can use iPad anywhere in the house. Will a Linksys router work with Apple? Can Mac be "hardwired" and iPad wireless? Probably stupid questions but I need to learn. Thanks.

Bob Timmons wrote:
Thanks for the info. You are correct. I was speaking in general terms here based on my experience with the two devices in day to day use, and not in terms of exact specifications.
A better choice would have been to say that the "coverage" is about the same with the edge going to the Extreme....due to the newer mutliple antenna design.
We sure could use more help on the forums. Hope that you will become a regular.
Hi Bob
RF is a minefield, but one that I have worked in for ages, the most critical factor in my experience is location, location, location!
Better routers have more intelligently designed antenna systems, output power as I said is the same, radiation pattern (coverage) is dependent on antennas and physical location more than all other factors.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Mac connects but PC won't connect to internet via TIme Capsule wireless net

I have my personal Mac and work PC at home. I'm switching from a wireless network using my airport extreme base station to a new time capsule. Had no problems earlier, but now with my new wireless network I have the following problem:
- Both Mac and PC are able to connect to my home wireless network created through Time Capsule
- Only Mac can access the internet via the Time Capsule wireless network
- PC connects fine to the wireless network, but the settings indicate the internet cannot be accessed
I've tried fiddling with configurations etc. but cannot seem to get the PC to connect through to the internet using my Time Capsule.
The PC will connect directly to the net if I plug in the ethernet from my cable modem....What's the problem? Any ideas?

Welcome to the discussions forum AZR-DC.
The PC will connect directly to the net if I plug in the ethernet from my cable modem...
Make it a habit to power down your modem whenever you connect something different to it. Merely detaching the AEBS and attaching your Time Capsule or your computer directly will confuse most modems, so leave it powered down for a few moments. Power down your other equipment while you're at it.
Then, power up all the equipment as follows:
Modem... wait a few moments for it to complete its startup sequence.
Time Capsule. Wait a few moments again.
Computers.
Be sure your PC and your Mac are getting their addresses "via DHCP".

ITunes content not visible when connected to internet via wireless

I have been having problems with my Apple TV. It did not show any iTunes Store content. After some considerable attempts at reconfiguration, I finally restored to factory settings and I still could not connect to the internet via my airport extreme wireless network. I therefore ran an ethernet cable instead and all the itunes store content appeared and I was able to sync with my Macbook Pro. I then looked at the network configeration using the ethernet recorded the settings and took the cable out. Then reconnected using the wireless connection, initally it could not connect to the internet but then I went through the manual connection and set the settings using DCHP and it then connected but once again there is no iTunes store content, if I reconnect the iTune store content comes back as does the uTube and internet radio both of which also disappear if I try and go wireless. Any thoughts?

are you connecting to the same router for the ethernet and wireless connections?

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Automatically connect the Internet via dial up connection?

Hi all,
I am using LabVIEW 6i. I require to connect the internet via modem. I want this to be done automatically. I read some of the discussion here which discuss some AT protocols. Sorry, but I am not aware of these protocols.
After this auto connection I want to get data from some links. I think this I could using URL property of the windows' browser. If some one has other options please let me know.
Thanking you.
Vishal Shah.

I'm not sure I understand your problem. Do you want to dial up a flow controller and talk to it via
Modbus? I am familiar with Modbus and modem connects.
Alan
"Vishal" wrote in message
news:[email protected]..
> Hi Dennis,
> Thanks for the support.
> In our application we require to make connection of flow controller
> which are connected through modems and using MODBUS protocols. So it
> require to connect different modem (number) at different interval. Due
> to this what ever you have suggested is applied only if I need to
> connect only Internet through it. But which is not our application.
> So if you know about modbus protocols please let us know. Please guide
> us for this.
>
> Thanks.
>
Regards,
> Vishal.

HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple.

Satellite Pro P100 - Can't connect to Internet via LAN

I have a Toshiba Satellite Pro P100. Model No SPSA4A-005002
I used my recovery disk and wiped my computer, because of a virus and now I cant connect to the internet via cable but my wireless internet works perfectly.
Its completely dead there are no lights at the back of the laptop from where I plug the cable in.

Hi
Is your LAN card recognized properly in device manager?
In your case I would try updating the LAN driver. You can get the latest version here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you check the BIOS version. The latest version should be installed and load the default settings there.
In worst case its a hardware problem and you have to exchange the whole mainboard :(

Can't connect to internet via MacBook Pro to Airport Extreme

I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

DirecTV DVR HR20 connect to internet via Time Capsule

Hi Everyone,
I've searched and come across various topics about connecting the DirecTV DVR to the internet via Time Capsule, but none of them seem to provide a solution for wireless connectivity.
Can anyone point me to a topic where it describes the steps and any issues related to getting my DirecTV DVR connected to the internet via the Time Capsule wirelessly.
I have gone through the setup and I get connected to my network, but I get the error when it tries to connect to the internet.
Do I have to do any port forwarding or anything special?
I use to have my Netgear supporting this configuration, just purchased the Time Capsule and now I cannot get my DVR connected.
Thanks for the support
Jeff...

The Direct TV DVR has an Ethernet connection on the back, which is strongly recommended if you intend to download movies or any kind of high definition material.
If you are trying to use the new Whole Home feature, wireless is not supported by Direct TV for this service.
If you are trying to connect to the DVR using wireless from the Time Capsule, you must be using some sort of wireless to Ethernet bridge device.
What device are you trying to use?
Have you verified that this device is compatible with the Time Capsule?
As a test, connect the adapter/bridge to your laptop and turn the wireless off on the laptop. Open your browser to see if you can get an Internet connection.
If you can, you know the network connection is good and the focus shifts to the DVR as the source of the problem.
If you can't, we'll need to figure out if the adapter you are using will work the Time Capsule.

Nokia N8 Can't connect to internet via WIFI

HI!
I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot) with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
Solved!
Go to Solution.

alucard3 wrote:
Resolved by unofficial but efficiently hotfix.
http://www.n8fanclub.com/2012/12/wlan-connectivity-software-update-for.html
Hi am having the same problem but the link above does not work?
Thanks
ledders

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

Connecting to internet via D-Link airplus wireless router?

Similar Messages

Maybe you are looking for