Connecting to internet with iPad wifi

I have an ipad that my high school gave to me. For some reason I can't connect to the wifi in my house. My ipad can pick up the signal that the wifi that is giving off, but when I enter the wifi password. It keeps saying that I am unable to connect to the wifi. I know the password is correct and that I'm not mixing up my wifi with my neighbors wifi. Does anyone think they can help me with my problem or do I need to go to able and get the inside of my ipad looked at? The ipad is a 3 generation with the latest software for it.

It may be helpful to change the password of your wifi network to be absolutely sure you are entering it correctly.  Also, make sure the network name is a unique name (Linksys default is NOT a unique name). 

Similar Messages

  • I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

    I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

    Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
    On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
    Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
    If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
    (3) Start up in Safe Mode
    http://support.apple.com/kb/HT1455
    I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
    (4) Create a new admin user account in System Preferences Accounts pane
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Log out and log in to the new account. Try connecting with AirPort in the new account.
    (5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
    That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

  • Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn)

    Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.

    Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
    If this is your "modem".......
    http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
    It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
    Does this device appear to be your "modem"?

  • Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

    Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
    It does not recognise my old connection.
    Same case with wifi connection as well.
    Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
    But before it use to display my name now it is coming as Apple I-phone.
    Anyone who can help on this, how to get it resolved.
    - I have update my phone with backup (OLD version of IOS) but issue still presists.
    This is the same issue somone mention on below.
    http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
    Kind Regards
    @ru..

    If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

  • I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
    http://support.apple.com/kb/TS1398
    Regards.

  • How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

  • Can i connect my HDTV with ipad

    Can i connect my HDTV with ipad?

    gyrhead is right - a short video embed to further explain ( hopefully it works )
    Regards.
    Embed did not work as I thought -
    heres a link : http://youtu.be/UnyyCMPyTq8

  • Does ipad air have OTG functions  to connect a USB with ipad air)?

    Does ipad air have OTG function(which means using some device to connect a USB with ipad air)?

    iPads do not have a USB port.

  • Canny connect to internet with airport express

    I was connected to internet with wireless network using airport xpress and D-link DSL-300T cable modemeverything was fine till i did base station fireware update. Now i can only connect wired with usb modem, (my airtunes still works). Airport status is green and states i am connected to internet via ethernet _though safria is unable to find server. Have tried loads of things but to no success. Tried network assist but network password invalid? though it is correct! Also done hard reset on xpress no joy.
    Any mac guru s fancy a challenge!?
    Pls.

    Likely your ISP uses the PPPoE protocol to connect to clients - and PPPoE doesn't work properly with firmware version 6.2 for the Airport Express.
    Downgrade the firmware on your Airport Express back to version 6.1.1 with this software:
    http://www.apple.com/support/downloads/airportexpressfirmware611formacosx.html

  • TS1286 Cannot connect to internet with USB

    I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

    Hi bikernblondie,
    When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
    - O.C.

  • Cannot connect to itunes with ipad 2

    Still having trouble connecting to itunes with ipad. I have tried all the suggestions. What else can I do?

    I've just fixed mine go to settings  general then at bottom of page  click reset and follow on screen this worked for me after everything else failed

  • I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.

    I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.

    GerleMan, Welcome to the discussion area!
    There are two probably causes:
    Your ISP is blocking the port used by Entourage to send mail and the ISP used by the other wireless networks is not.
    OR
    Your ISP doesn't like OS X's default MTU seting of 1500. If this were the case it should also affect any large file transfers you try to make from your Mac to the Internet.

  • Post Moved Unable-to-connect-to-internet-with-spe...

    post moved http://community.bt.com/t5/Other-BB-Queries/Unable-to-connect-to-internet-with-specific-computer/td-...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Ok..So you mean still cannot accessing the website with Internet connection? Try to use nslookup in command prompt to check whether can resolve domain name correctly. Also make sure you can ping the router's LAN IP from computer.
    If not, you can try to use the following DNS servers from OpenDNS.com:
    208.67.220.220
    208.67.222.222
    Hope helps..
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

Maybe you are looking for

  • Report Generation and ActiveX control of MSWord 97

    I had posted this problem sometime ago with no response, but I had a chance to look at it again. I wanted to try some examples using MS Word instead of MS Excel. Well I would always get the attached error. It looks like LabVIEW cannot find MS Word. I

  • 3D Tween Quality Issues

    Hi all, Has anyone noticed how the 3D tween causes a loss in visual quality of the movieclip?  For example, if I have text within a movieclip, and then put a 3D tween on that movieclip, the text becomes almost blurry (even when the tween is complete)

  • CS3 corrupting images

    I am using CS3 in OS X 10.5.  All of a sudden my photos are getting corrupted.  I can see an image in Bridge, but when I click on it the image becomes completely distorted.  It becomes colorful horizontal lines.  I tried removing CS3 and re-installin

  • Copy & Paste Functioning Incorrectly

    All of sudden, the copy & paste functionality within Dreamweaver has gone crazy. Each time I try to highlight some lines of code to copy to my windows clipboard, the entire file gets selected. Or if I am finally able to get to a couple lines of code

  • Apple care protection plan for macbook pro with retina display

    hi!!! i recently purchased macbook pro with retina display. Im curious about the apple care protection plan to extend the warranty of my macbook. I would just like to ask if the apple care protection plan includes battery replacement w/in  the next 2