Connecting to ipod touch model router WRT160N

WRT160N does not have PW capabilities, so how can I connect my ipod touch. Also can not get to the site to change setting with IP address 192.1689.1 It does not let me continue pass the PW screen. Very frustrating I hope someone can help me 

The default password for the Linksys router is admin, leave the user name blank.
If the admin password is not working then you might have changed the router password.
If you are not sure about the router password then you will need to reset the router and reconfigure it.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.

Similar Messages

  • HT4972 I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH  MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS.

    I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH  MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE 10.6.3 DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS."DEVICE LIST" IS NOT DISPLAYING IN LEFT HAND SIDE WINDOW OF I TUNE. BEFORE IT WAS WORKING IN ITUNES 9 AND I WAS USING IT. BUT NOW IT IS  NOT DETECTIN AT ALL. SO PLEASE HELP ME WHAT TO DO?

    Have you tried here:
    iOS: Device not recognized in iTunes for Windows

  • Wierd!!! wireless router toasted when connecting to ipod touch...

    this is sooo wierd... everytime when i connect my ipod touch to my wifi , it toasted my wifi router and i have to reboot the router to get it to work again. And if i connect my ipod again, my router will go dead again. (it said it can't release an ip address).
    Also same thing happened if i connect my ipod via USb cable.
    any ideas???

    it happens if you connect your ipod touch to your computer using usb ?
    sounds very strange as connecting it to usb should not affect tcp/ip to the router at all
    but i would try upgrading the firmware of the router anyway

  • MacBook loses wireless connection when iPod touch connects to network

    hi
    ever since upgrading to 10.5.5. on my MacBook i've had the "intermittent network connection" problems that have been described and discussed (without any real solution from what i can see) in another thread.
    PROBLEM: every couple of minutes my MacBook loses connectivity to the network - the AirPort icon still says that i'm connected, albeit with one less bar than before, but i can't connect to anywhere, not even to the wireless router - and to re-establish a connection i need to switch off AirPort, switch it back on, it will then reconnect, and after two minutes or so i have to do it all over again because the network connection drops again.
    NOVEL OBSERVATION 1: reinstalling the 10.5.5. combo system updater helped somewhat. i used to get an error in system.log about there being too many state transitions on the wireless network and about network traffic reduction measures being taken to overcome this problem, but after reinstalling the 10.5.5. combo system updater this message never appears in the logs and I get kicked off only sometimes (see what i say in point 2 below)
    NOVEL OBSERVATION 2: now my MacBook will only lose its connection to the net if i switch on my iPod Touch and switch its wireless interface on. in fact, the only way to avoid the MacBook getting constantly disconnected is to make sure that the wireless interface on the Touch is switched off in the Touch's system preferences; if I just sleep the Touch (top button) without switching off its wireless network interface first in its System Preferences, then the MacBook will keep disconnecting even while the Touch is in sleep mode (presumably the Touch keeps polling the network or something, even while it's in sleep mode).
    DIAGNOSTIC NOTE 1: I have another wireless device (my Nokia E51, which has wifi capabilities) and if I connect it to the wireless interface then the MacBook's connection isn't dropped - i.e. the MacBook only loses its wireless connection when my iPod Touch connects to the wireless network.
    DIAGNOSTIC NOTE 2: I have upgraded my wireless router (before I had a Linksys WRT-54GC, now I have a Netgear WGR614v9) but that has made no difference.
    DIAGNOSTIC NOTE 3: I have also tried altering the router's settings (i have played around a_lot with this, trying every combination I could think of - e.g. staple down particular devices to particular ip addresses, use only 802.11g versus automatic b/g, etc) but that has made no difference either.
    RANT:
    The only thing that prevents these disconnections from occurring is to keep the iPod Touch's wireless switched off, which ***** because if I'm in the kitchen I can't have it switched on to monitor my email (yes, I've no life, i hang around waiting for emails), or if I go have a lie down and want to check out stuff on the net, or to browse the iTunes music store or whatever, then I know that my connecting my iPod Touch the computer will be disconnected.
    This obviously *****, right? And a lot of people are having wireless problems with their MacBooks, right? And these problems seem to have been around for over a year, right?
    So why hasn't Apple solved this problem yet? Or am I just being melodramatic?
    Your thoughts on any or all of the above, or flames if that's your preferred method of communicating, are invited. =)
    Cheers
    dr.colekat

    Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
    For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
    If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

  • I am not able to connect my ipod touch 4.3.5 to the computer.

    I am not able to connect my ipod touch 4.3.5 to the computer.
    It is not showing in Itunes. it is asking me to download new mobile app n asking
    me to redownload and install it. I did it and still not able to connect. My firewall is
    also off. So please help me.
    I m using itunes 10.5

    This usually indicates you really have a 2nd gen unit. Check the model number on the back. A1288 is 2nd gen. A1318 is 3rd gen.
    Stedman

  • I get "Reading Error" when using USB connection from Ipod Touch to car radio. Any ideas?

    I am trying to connect an IPOD Touch with my car radio via USB port.  Using proper cable which works.  When I connect the auto radio automatically tries to hook up with the Ipod but then displays "reading error"

    The the car-system manyfacturer say it will work with your model iPod and its iOS?
    Not all do.

  • When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Wireless connection to ipod touch 8G 2nd generation

    I may have to use a different wireless router, (which could be one which uses wireless n), as i am having to change my broadband service provider. So can anyone advise me what wireless does the ipod touch 8G 2nd generation use (ie wireless b/g/n etc) & are they compatible with wireless n/wireless routers, or is wireless n backwards compatible/generic etc with all other wireless/devices.
    THANKS

    All the iPod Touch models are b/g except for the newest 4th generation which is finally now "n"..
    Yes, they are backwards compatible.
    2nd generation (b/g)
    http://support.apple.com/kb/SP496
    3rd generation (b/g)
    http://support.apple.com/kb/SP570
    I have always used all Apple Base station.
    Time Capsule, Airport Extreme, and also the Airport Express of which I have 3...
    I am now using the Dual Band Airport Extreme for the main base station and the 3 Airport Express units for Airplay and one of them to extend the network.
    Works well with the Dual Band.

  • Can't connect my ipod touch to wifi tried everything!

    I am trying to connect my ipod touch to my home network.
    I have typed in the ssid and the password correct and it connects but i havent got any internet! Please help.

    You should not have to type anything in (except maybe the first time you connect) to connect to WiFi.
    How do you have your home network set up? Suggestions for settings follow:
    SSID - On
    DHCP - On
    MAC address filtering - OFF
    Encryption - 128 bit WEP or, preferably, WPA or WPA2
    If your network resembles those settings above, then do the following on the touch:
    Go to the network connection, tap the blue >, and tap Forget Network
    Go to Settings > General > Reset > Reset Network Settings and tap that.
    Once your iPod restarts, go to Settings > WiFi and log into your network again. You can select Other Network and type in the name if the touch doesn't discover the network on its own. If you are using encryption, you will be prompted with a question about the type being used. Tell your touch the correct one. Enter your password or WEP hex key. Note: on WEP networks, you must enter the key and not the password. You must have 128 bit encryption enabled on your router.
    When you are connected, you should see a check mark next to your network name, a lock symbol if you are logged into an encrypted network, and a blue >. Tap the blue > and you should see your touch IP address, subnet mask, Router IP, and DNS IPs. At that point you should be good to go.

  • How do I connect an iPod touch to Internet using an Ethernet cable

    My daughter,s college has no WiFi in the dorms, but each room has an Ethernet connection. WiFi routers are not allowed.  Can we connect the iPod touch to the Internet using the Ethernet cable and some sort of hardware or patch cord

    No. The iPod will only connect to the internet via wifi. The USB connection provides NO internet connectivity.
    Maybe you can cheat and setup a laptop with an wifi card as a hotspot
    Connectify Hotspot - The Wi-Fi Software Router for Windows PCs

  • How do i up date my ipod touch model number MB531LL

    how do i upgrade my ipod touch model number MB531LL

    You have a 2G iPod. Thoase can only go to iOS 4.2.1
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
      A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.

  • Is the ipod touch model MA627LL blue tooth?

    Connecting to a car with blue tooth? Is the ipod touch model MA627LL blue tooth?

    You really should call the closest Apple Store and ask.

  • So, i just connected my ipod touch 4g to my laptop and there is an update 4.3.3  available  i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!

    i just connected my ipod touch 4g to my laptop and there is an update 4.3.3  available  i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!

    Try a direct download:
    iPod, iPhone and iPad Firmware Download
    Manually install it by holding your "Option" key down when clicking on the "Restore" button in iTunes and select the firmware file you downloaded.

  • How can I get a list of apps which are supported on ipod touch model ma623zo?

    How can I get a list of apps which are supported on ipod touch model ma623zo?
    It's about 6 years old I think.
    I have put the latest IOS on there (currently 3.1.3 (7E18)).
    I download apps from the app store but they often fail to launch. I assume they're incompatible.
    Is there a way to check which apps will work and which won't before I buy them?
    Thanks!

    I have no idea how my reply could be "misleading". I stated the exact situation: there are millions of apps in the iTunes Store, and providing a comprehensive, accurate list of which apps support which version(s) of iOS would be highly impractical. You can perhaps help with your search by going to AppShopper:
    http://appshopper.com/search/?search=iOS+3
    That will give you at least some starting points, but AppShopper is neither comprehensive nor completely accurate. I've found a number of apps listed there over the time the site has existed that either are no longer offered or which have been updated beyond the iOS version indicated. But it might help.
    Regards.

  • Often, when I connect my iPod Touch to the PC, instead of it showing up as a device in iTunes, a window pops up that says I have connected a camera, and asks what to do.  It is really annoying when this happens, because sometimes I cannot update my iPod

    Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do.  This device doesn't have a camera in it.  When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it.  I have an old Nano that has never had this problem at all.  Can anyone tell me what to do about this?

    Try here:
    iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

Maybe you are looking for

  • MR11 report

    Hello Experts, MR11 report (SAPRCKM_MR11 program) doesn't have the ALV grid display and hence we are not able to download the report into excel. I have seen few posts saying to change the 'Scope of list' from BEST to ALV in the config. Will this real

  • Creative mediasource and Burning Di

    I got Creative Mediasource with my Creative Nomad MuVo2 Player. I have "auto upgraded" the software and the plugins through the site. There doesn't seem to be any burn option, although the help file tells how to do it. I know that there are better bu

  • Error when sending data from Cube to ODS

    HI, I am extracting data from 2lis_02_itm & I stored the data in 0pur_o01(ODS) tha data is fine in ODS but when I am trying to send data from ODS to Cube 0pur_c07 it is giving the above error InfoSource 80PUR_O01 is not defined in the source system E

  • How do you share a Guest's file to the owner's files - detailed instructions needed

    Previously I asked how to save a file created by a Guest user into the owner's files.  Matt Clifton answered "Put files in the Users/Shared folder, they will not be deleted when guest signs out."  I can't see how to do that.  I am creating a recordin

  • IM DESPERATE!!! ANYTHING i will rate as helpful. just please help me.

    Hello. CAn anyone pleaase help me!!?I had my ipod video for a while now. I never really had trouble with it. Today..I was downloading some new music to it. I click on my ipod from the source menu and i looked at all the songs that I have on it. SO fa