Connecting to Motorola Bluetooth H300

I have paired my Blackberry 8100 to a Motorola H300 bluetooth device.  The pairing was ssuccessful but when I try to connect a message stays on the screen 'waiting for Motorola H300'.  I cannot connect to the H300.  I can connect the H300 to another phone so I know it works.

You need to set your H500 into "discovery mode" also:
From the Off status, hold its button down for about 10 seconds until you see a sold blue light, then go to the iphone's Bluetooth settings do the pairing.
My iphone automatically paired without having to enter the H500's default PIN "0000".

Similar Messages

  • Ttrying to connect a Motorola bluetooth ear piece to my iPhone 5S

    I am trying to connect a Motorola bluetooth ear piece to my iPhone 5S. It was connected once before and I told the phone to forget it. Now I cannot get it to recognize the earpiece again. Any suggestions? The earpiece has only 3 buttons. on/off, hang up, initiate a call. I've powered it on and off as well as powering off the phone.  I've even installed iOS 7.1.1 to see if it made a difference and it didn't. Suggestions?

    You need to put the earpiece into discovery/pairing mode. Since you tapped on forget the device, the phone needs to see it again, and that will not happen unless the phone is in discovery/pairing mode. If you are unsure how to do this, then check the documentation for the earpiece. Generally it involves holding a button down for a short period of time causing the light to blink, then checking the phone with Bluetooth turned on.

  • 8520 curve Not able to connect with Motorola Bluetooth headset

    Dear All,
    Kindly assist me to connect my BB8520 curve with my motorola bluetooth headset. I hv tried but BB displays no device around.
    Thanks in advance
    Brgds
    G.Suresh

    hello, what is your device model? Can you write down step by step how you are trying to pair the two devices?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • 6230i connectivity to Motorola Bluetooth device

    I am trying to get my new 6230i to connect to my Motorola Bluetooth device. The phone sees the Bluetooth in my Audi A6 and works fine. And, my prior phone, a 6230, sees both the Audi and the Motorola earpiece just fine. But the 6230i doesn't find/pair with the Motorola unit...any suggestions would be much appreciated...
    John

    Hi insightfulone
    Did you go to Menu > Settings > Connectivity > Bluetooth > Bluetooth = On and then Search for audio enhancements?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

    Why does not connect properly macpro my motorola bluetooth headphones S10?     I get a connection error message and there is no sound.                         (I want to use headphones to listen to music via bluetooth from my macpro)   
    the s10 works perfectly on my ipod touch 4g. 

    this is   
    ERROR HAS OCCURRED Bluetooth audio.
    It failed to establish connection with their
    audio device. make sure it is on and
    in the range. you may need to restart the
      audio section of the program you were using
    STOP USING THE HEADSET WITH MICROPHONE.
    ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

  • My iPhone 5 won't connect to any bluetooth or wifi, What do I do?

    My iPhone 5 won't connect to any bluetooth or wifi, I was going to back it up and restore it but it won't back up to my macbook pro. I'm running Lion 10.7.5. as of right now. I don't know why it stopped working, my itunes is up to date and I cannot back it up to there either. What can I do?

    See if this helps
    http://support.apple.com/kb/TS1559

  • New to the iphone, I cannot connect with the bluetooth to other devices, any help?

    I have a new IPhone 4, I cannot connect with other bluetooth devices - any help??

    What, exactly, are you trying to pair your phone with? These are the only supported bluetooth profiles:
    http://support.apple.com/kb/ht3647

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

    When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

    I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

  • My Droid Razor HD updated yesterday. Now it will no longer connect to the bluetooth in my car

    Yesterday I accepted the update for my Droid Razor HD. Now it will not connect to the Bluetooth in my car (worked for the previous 8 months).

    Christin - Generally your pairings will still be in a list under BT on your phone. Unless of course, you performed a Factory Data Reset on the phone.
    Your car's radio should have a reset capability. The front panel on my SONY comes off, and there's a reset button there. Do you have documentation that came with the car for the radio, or if an aftermarket radio, for the radio itself? If not, there is generally information on the web that you can Google to find the reset procedure.
    HTH.

  • HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac.  The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
    I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

  • My brand new iPhone 5 keeps saying "Connection Unsuccessful: Make sure "___" is turned on and in range" when I try to connect to my BlueTooth Stereo.

    I just bought a brand new iPhone 5 (White and Gold) and have been having trouble keeping it connected to my BlueTooth Stereo.  The stereo was purchased brand new back in September and is current on all software.  Before I had my iPhone 5, I had the iPhone 4 and had no troubles with it connecting or remembering to connect to the stereo when it was in range.  Now, in order to connect to it, I have to first "forget the device" then search for it again, find it, and connect.  As soon as I turn either the stereo off, turn the iPhone off, or switch modes on the stereo (to CD mode, radio, etc) it loses the connection and does not pick it up again.  It still shows up in my list of available bluetooth devices, but when I try to connect it says "Connection Unsuccessful: Make sure '____' is turned on and in range" which of course, it is.
    I bought this stereo because I am a music teacher and use my phone frequently when teaching my classes.  You can probably imagine how cumbersome it becomes when after each class if I have alternated between using my iPhone to play music or switching to CD mode, I then need to "forget the device" and follow the steps I outlined above to get it working again.
    Has anyone else had this problem with the new iPhone and does anyone have a solution (I HOPE!!!!!)
    Thanks!
    -Disgruntled Music Teacher

    I've not seen this type of behavior, but see if this support document helps. http://support.apple.com/kb/HT1664

  • Iphone (5c) no longer connects iTunes to bluetooth since recent Apple iphone update

    iphone (5c) no longer connects iTunes through bluetooth since latest update (8.1.2)

    Hi Jill4547, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you're not able to sync your iPhone to iTunes wirelessly, or Bluetooth connections are not working as expected. 
    The iPhone syncs wirelessly to iTunes using a Wi-Fi connection. If you haven't been able to sync wirelessly since updating to iOS 8.1.2, you can use the steps in this article to check your sync settings in iTunes:
    Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support
    You can also use this article to troubleshoot the Wi-Fi connection on your iPhone:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    For help with troubleshooting Bluetooth connections, see the tips in this article:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    All the best,
    Jeremy 

  • Unable to connect internet using Bluetooth in my E...

    Hi
    Iam using Nokia E5.
    Iam able to connect to mobile internet to laptop using USB connection,while using bluetooth for connceting internet iam getting below error.
    "failed to connect to network.the modem is in use by another application ormay not be configured properly"
    please advise how to over come this.

    Same problem here with E72...well in 75% of cases, sometimes it connect easily, which make me believe the settings are correct.
    Any news here? Does the problem lie with the computer or with the phone? Sometimes, but usually not, restarting one or both device helps.
    Thanks,

Maybe you are looking for