Connecting to my 1024x768 lcd tv - promise of success then failure

Hello Forum,
I have been trying off and on for 18 months to connect my G5 to my JVC LT-Z37EX6 through the PC-in port. I have the adapter to make the connection, and at start-up the white screen with the apple shows up on the TV; as soon as it switches to the log-in screen, I see only black. I can unplug from the tv and back into the monitor, and the signal is good. Acceptable resolutions from my TV manual are VGA and XGA, neither of which works.
It seems like I am so close! What is it about the start-up screen which allows it to display, while the log-in screen does not? AHHHRG!
I'd be grateful for any insights. I also have HDMI, which I could buy expensive adaptors for. Not as clean as I would need to switch between my surround-sound DVD set up each time. I this the best route and is it a sure way?
If this post would work better on another forum, please tell me.
Thanks!
Message was edited by: Shawn Dolley

Hello Tom,
Thanks for the reply.
I have tried most of the resolutions available, and all of the low ones. I even downloaded software to customize resolutions/refresh rates to try other possibilities, and ended up rebooting in safe mode to get my signal to display again.
I have also gone through the TV menu. Of course I switched to PC-in port and played with resolution (2 choices) but that is it.
My 1680 x 1050 Apple Cinema display does not have TV-out.
The frustrating part is that the white screen with the apple displays on my set. What is it about that signal which is special?
Anyway, your suggestions are good to try from many angles, but, alas, I have been down them roads.
Thanks again,
Shawn

Similar Messages

  • MACBOOK DON'T CONNECT WITH LG FLATRON LCD DISPLAY

    Hi friends!
    I bought a LG FLATRON LCD DISPLAY Model M1994A.
    My Macbook 13" have a 10.5.6 Leopard.
    The fact is when connect de Macbook with LCD screen thru VGA cable and miniDVI adapter. Plug the miniDVI adapter, and the screen of Macbook blinking forever at the blue screen; the lcd has the message "NO SIGNAL"
    If I unplug the miniDVI adapter, everything gets back to normal on the macbook screen. I plug it again, I get the blinking blue screen.
    Tried rebooting, unplugging everything else from the external screen, no luck.
    If I boot the macbook with the external screen on and the macbook closed, then it is recognized a little bit: appears the apple boot screen then blinking, but when I want to use both screens, it will blink again.
    HELP ME PLEASE!!!
    Regards from Chile!

    May not be any help but, I have the LG W1952TQ and it works great with my MacBook. You may try going to system prefs, click on displays, then click on Detect Displays and see if that works, I had to play with the resolutions some and ended up selecting 1152 X 864 setting for mine.
    Hope this helps ya,
    Barry

  • Connecting Mac Book to LCD Screen

    Can you connect a macbook to an LG LCD computer screen instead of buying an apple cinema display? And if so where can i get the cords/cables to do so??

    Yes, you can. I had my MB connected to an LG LCD via a VGA cable. You'll need an adapter to plug into your MB. Chances are, your MB should have a Mini-DVI port - if so, you'll need this adapter (assuming that your monitor supports VGA). http://store.apple.com/us/product/M9320G/A

  • I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

    As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
    I do this and no matter what I seem to do this message continues to return.
    Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
    Many thanks
    Mike

    Hello John
    Sorry I haven't got back to you sooner.
    Thanks very much for your help, your solution solved my problem.
    Thanks again and kind regards
    Mike

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • Database Error (maybe) while working on User-Role or Assiging a Cloud (Unable to connect to the VMM database because of a general database failure)

    Hi,
    Suddenly I got this error in SCVMM 2012-R2 Roll-up 1:
    When working with User-Roles (create/update) or assigning a Cloud :
    "VMM encountered a critical exception and created an exception report....
    search user forums for well-known failure root causes for self-help" (how sweet)... (if it's "well known", why not coding the exception handling correctly?)
    The relevant part of the report might be this:
    "SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again."
    (side question: what does this mean: "Ensure that the SQL Server is ... configured correctly"?
    I can say that :
    SQL is configured by the book, that all services are running (did a reboot of VMM server too) and that all other VMM functions work OK. I don't believe that SQL is only used for user-roles...
    Acting as Domain admin and VMM admin.
    All updates are installed.
    Please find the report @the and and a screen shot attached.
    Thanks for any help.
    Report.txt:
    ------------------- Error Report -------------------
    Error report created 03.04.2014 15:07:56
    CLR is not terminating
    --------------- Bucketing Parameters ---------------
    EventType=VMM20
    P1(appName)=vmmservice.exe
    P2(appVersion)=3.2.7620.0
    P3(assemblyName)=Utils.dll
    P4(assemblyVer)=3.2.7620.0
    P5(methodName)=Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery
    P6(exceptionType)=Microsoft.VirtualManager.DB.CarmineSqlException
    P7(callstackHash)=4c11
    SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again.
    EIP=0x00007ffb74c75a88
    Build bit-size=64
    ------------ exceptionObject.ToString() ------------
    Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again. ---> System.Data.SqlClient.SqlException: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       --- End of inner exception stack trace ---
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    *** Carmine error was: DatabaseFailure (2605); SQLServer; 8144
    [s#5cf2] ExecuteNonQuery()
    [s#5c38] Task`1.SubtaskRun(this: (Task`1#b), TaskID: (guid) 0e1c3e3d-76de-4d8b-bfc2-cbcc400fadf4)
    Full call stack from when the exception was thrown:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
       at System.Environment.get_StackTrace()
       at Microsoft.VirtualManager.DB.CarmineSqlException..ctor(SqlException sqlException)
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    --- SqlException details -----------------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
     Error = 8144
    Index #0
    Source: .Net SqlClient Data Provider
    Number: 8144
    State: 2
    Class: 16
    Server: localhost\SCVMM
    Message: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
    Procedure: prc_RBS_UserRoleSharedObjectRelation_Insert
    Line: 0
    --- Caller StackTrace -----------------
    FileName:; Method:ExecuteNonQuery(); lineNo:0; ilOffset:178.
    FileName:; Method:<AddObjectSharingData>b__14(); lineNo:0; ilOffset:12.
    FileName:; Method:<HandleInsertErrors>b__3(); lineNo:0; ilOffset:11.
    FileName:; Method:HandleInsertErrors(); lineNo:0; ilOffset:6.
    FileName:; Method:AddObjectSharingData(); lineNo:0; ilOffset:312.
    FileName:; Method:AddSharingData(); lineNo:0; ilOffset:23.
    FileName:; Method:AddResourceSharing(); lineNo:0; ilOffset:464.
    FileName:; Method:RunSharingSubTask(); lineNo:0; ilOffset:49.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:23.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:RunNewAndSetUserRoleSubtasks(); lineNo:0; ilOffset:166.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:140.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:SubtaskRun(); lineNo:0; ilOffset:221.
    FileName:; Method:RunInternal(); lineNo:0; ilOffset:112.
    FileName:; Method:Run(); lineNo:0; ilOffset:4.
    FileName:; Method:System.Threading.IThreadPoolWorkItem.ExecuteWorkItem(); lineNo:0; ilOffset:0.
    FileName:; Method:Dispatch(); lineNo:0; ilOffset:162.
    -------- exception.InnerException.ToString() -------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
    --------------- exception.StackTrace ---------------
    at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    ------------- StackTrace from handler --------------
    This is the call stack from where the exception was caught, not where it was thrown.
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    -------------------- Assemblies --------------------
    mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Version=4.0.30319.34011
        BuildType=retail
        Product=Microsoft® .NET Framework
    VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Version=4.0.30319.34003
        BuildType=retail
        Product=Microsoft® .NET Framework
    TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Version=6.3.9600.16394
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Version=6.3.9600.16384
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    WSManAutomation, Version=3.2.7510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.PhysicalMachine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Version=3.2.7515.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UpdateManagement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.RunAs, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.DB.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    --------- Extra Data for Watson Report -------------
    Error Reporting Enabled=True
    *** Extra Data ***
    Process ID = 1500 (0x05dc)
    Managed Thread ID = 25
    Native Thread ID = 1260 (0x04ec)
    Thomas.

    I (quite honestly) am one of those folks that generally do not read the KB articles associated with a patch or UR or SP - as you don't expect details like have been put into this particular one.
    But as Kristian pointed out - within that KB article is the SQL script that modifies / updates this SQL Stored Procedure.
    http://blogs.technet.com/b/scvmm/archive/2014/01/29/how-to-update-scvmm-2012-r2-to-update-rollup-1.aspx
    Needless to say, the feedback was given to MSFT that folks would overlook that this SQL script needed to be run.  So we are just trying to help out.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • Ipod touch 3rd generation will connect to my wifi for a few seconds and then nothing will load. help please?

    I have an ipod touch 3rd generation 64gb and it has iOS 5.1.1 and it will connect to my WiFi for a few seconds and then nothing will load. It says I have full connection bbut nothing works. I have 2nd generation ipod and it connects fine. Along with my laptop and xbox 360. I have tried downgrading it and restoring it from itunes. I also tried forgetting the network and inputting it myself but it sti does the same thing. I even tried resetting my wireless modem but it still didnt make a change. I really could use some help. I can't call apple cause im no longer under warranty.

    Reset the iPod and connect to its syncing computer.  It it shows in iTunes restore the iPod.
    Next see if placing the iPod in recovery mod will allow iTunes t see the iPod so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    Please see the subject line thanks
    I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor.  Have the case number for the promised refund available.
    If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device.  Buying storage in iCloud does not add space to the device which is what you need.
    You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
    HTH

  • jservException Connection from /172.16.1.2 refused due to authentication failure

    We recently encountered an issue with our iStore server where the CPU spiked taking the website offline. The server was still up and running however we were forced to restart Apache to get the server back up and running. The logs were very undescriptive outside of the following error: <jservException> Connection from /172.16.1.2 refused due to authentication failure. Everything has worked fine before/since this incident.
    We are running iStore/EBS version 11.5.10 and our overall architecture is one iStore server in the DMZ with an application server and a DB server on our server VLAN all running Oracle Enterprise Linux. What steps can we take to track down this issue to find the root cause? Any help would be appreciated, thanks.

    Sharuk wrote:
    what Db version
    11g r2
    What is OS version
    OEL 5.9
    did you installed cluster
    Yes
    where the Installation Was when Power goes down ?
    This I posted in my question, power went down when it was creating OEM Files (CONFIG: Starting execution: /u01/app/oracle/product/11.2.0/dbhome_1/bin/emctl secure dbconsole -host racnode1 -sid racdb)Simply recreate OEM

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • Tried to install iOS 7 and it said I needed to connect my phone to iTunes, so I did and then it said my phone wasn't updated to the software now my phone isn't working!

    Tried to install iOS 7 and it said I needed to connect my phone to iTunes, so I did and then it said my phone wasn't updated to the software now my phone isn't working! all it's doing is showing a iTunes logo with a charger thing under it and won't let me cancel or anything

    After connecting your iPhone to the computer did you restore using the iTunes on your computer?

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • HT1212 I've been trying to restore my mini ipad to factory settings. When I click restore ipad (while its connected to itunes) it will update for a while then a pop up will say I have to enter the passcode on the ipad! IDK THE PASSWORD!!! HELP

    I've been trying to restore my daughter's mini ipad to factory settings. When I click restore ipad (while it's connected to itunes) it will update for a while then a pop up will say I need to enter the passcode on the ipad!! That's the whole point of restoring the ipad. We don't know the password and it's disabled. HELP

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent. Today I tried connecting them via blootooth. MBP state "pairing success" whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over

    I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent.
    Today I tried connecting them via blootooth. MBP states "pairing success" (only after NUMEROUS attempts!!!) whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over.
    Also, the iPad does not seem to recognize ANY bluetooth device in the house (they ARE discoverable since my MBP DOES "see" them) like, for instance, my mini-Mac.
    Any help would be appreciated; (I hope the problem lies NOT in the bluetooth antenna, in other words not in hardware.)
    P.S. The MBP seems fine since it DID connect to Mac-mini.

    Hello:
    Was the iPad paired with another device?  If so, you need to "unpair" it from the previous device.  Bluetooth devices may be connected with only one thing at a time.
    Barry

  • OniPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. Can anyone help with this?

    With my new iPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful. However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. It worked well with my previous iPhone 4S. Can anyone help with this?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Wish list for the Helix 2?

    I realize this is a bit early, but now that there are a few Helix units out in the wild, what features would you like to see added or changed for the next ThinkPad Helix iteration? My personal wish list: Must-haves: - Haswell  - a solid desktop dock

  • Sharing Internet with windows, connected by ethernet, using mac's airport

    So I have a desktop that doesn't have Wi-Fi and I too cheap to buy anything for it. So I'm trying to use the MacBook's airport to give the Windows internet through the ethernet connecting them both. I went to internet sharing and entered "Share conne

  • Exception  while connecting to SAP from Java

    Hi, When my application tries to connect to SAP R/3 system, I am getting  the following exception: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Coul

  • BD Lookup Error _ Not using the COmmunication channel!

    Dear all, I Tried to  do DB Lookup as told in this blog by siva /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler I used the below code. I am not Getting any error, the mapping is successfully ACTIVATED. But in the Receiver field i

  • TOC associated with book isn't a choice when exporting to epubs

    I'm using InDesign CS4 because I can't afford to upgrade to CS5.  I'm running it on Win XP SP3 with 4 GB of RAM. I have set up a book and it exports to pdf without problem. But when I try to export it to digital editions, the only TOC choice I am giv