Connecting to Non HD TV

How can I connect my ATV to my Big Screen TV thru the regular RCA Video Input?
Is there a way to combine the component RBG outs to a single Video Out?
My TV doesn't have an HDMI input and the component inputs are already in use by my HD Cable Box?
This is a severly limited platform.

It's not that hard. Get your standard red/yellow/white cables. You will also need a paperclip and a HDMI(male)-DVI(female) adapter. Go to the main finder window/menu (the one that comes up when the ATV first launches).
-Unwind the paperclip (or use bell-wire) to connect pin 14 to 16 of the DVI side. (For a diagram of which pin is which look up DVI on Wikipedia. )
-Plug your composite-yellow in the green "slot" (this will give you an image, but BW)
-unplug the composite-yellow, plug an male HDMI-female DVI adapter (with an unwound paperclip connecting pin 14 to 16)
-Let about 30 seconds go by
-unplug the HDMI-DVI adapter and replug the composite-yellow, when the image comes back, it comes back full color
-If it doesn't, make sure the metal is touching the inside metal clips of 14 and 16 and try again (make sure you are letting enough time go past).
The negative of this method is that it will go back to b/w every time the apple tv loses power. You could avoid this with a UPS or just keep the ATV somewhere accessible.
I use this adapter: http://www.amazon.com/gp/product/B000FUVNX8/ref=oxya_ohproduct

Similar Messages

Setting up a new TC. Everything went fine. I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC. All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router. I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC. The TC fired up found tttttttthe internet connection, and glowed green. I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os. All devices connect with the internet via the Airport device. they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet. When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
Any suggestions?

Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
What is this router?? Is it the TC or a router supplied by the ISP?
It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
On the airport utility open your TC by clicking it then clicking edit.
Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
And make sure Network is set to DHCP and NAT.
Please give me the screenshots of the same things from your setup.

CRM server connecting to NON-R/3 servers & R/3 Servers

HI Experts,
Please explain how the r/3 sysytem & CRm system are connected ,
how the crm system & Non -r/3 SYSTEMS are connected.
the above mentioned are connected mainly by SOAP ( Simple object Access Proctocol).
Please explain the conecpt for the above mentioned two
Thanks in advance
Prajith P
Edited by: Prajith Prabhakara on Feb 15, 2011 4:21 AM

Hello Prajith,
The SAP CRM system with the CRM Middleware and CRM Applications forms the core of CRM System Landscape. The CRM Server can run as a stand-alone solution or with various back-end systems. If SAP ECC is the backend system, only a plug-in(PI_BASIS) is needed to handle the data exchange with the SAP CRM Server.
CRM Server can be connected to non R/3 Back-end through SOAP (Simple Object Access Protocol ), XML, ASCII adapter, BW system, SAP R/3 Back-end through the R/3 adapter.
Other systems may be other ERP systems on non-SAP vendors. While many systems are linked to a CRM Server, they may not always use CRM Middleware functionality. The BW e.g. extracts data from a CRM Server u201Cpassingu201D this data u201Cbyu201D the CRM Middleware, which means it does not use BDocu2019s. The APO System is accessed via qRFC and BAPI calls from a CRM Server, also without the help of CRM Middleware.
Hope that helps.
Regards,
Rohit

Can I connect two non-TB external displays to a new MBP?

Looking to pick up a new MBP and I would like to connect two non-Thunderbolt monitors, they are nice but WAY too expensive, and I'm wondering if this is possible. I know I can use Matrox Head2Go line of products, but I would like to avoid shelling out another 2-300 on other hardware if I can avoid it.
So any other ways to drive two monitors? I'm surprised there is no Thunderbolt -> DVI adapter or something. Heck maybe there is, but I haven't seen it yet.
Thanks

here is the adapter your were looking for http://store.apple.com/us/product/MB570Z/A
you'll also need to consider getting something that supports usb to dvi which will make your third monitor connnected via a usb port. This uses DisplayLink Drivers which let you connect a monitor via usb. Warning, it does not have full support for Lion yet.
I'm using the arkview usb display adapter. there are other on the market, they all use DisplayLink. And since I'm on Lion I'm waiting for DisplayLink to fix their drivers to work on it (it's been a struggle).
If you're on Snow Leopard it will do you well to stay on it. .
you could get on Thunderbolt display and then connect a monitor to that with the dongle I showed you. Then you will have no issues with Lion and your three displays.
Thunderbolt tech is new and new adapters will be coming out for it, especially something that handles mutliple screens. but you'll have to wait for this technology to be made.

How to best connect multiple non TB monitors to 2013 macbook air

I have the new Macbook Air (2013)
Model Name:          MacBook Air
Model Identifier:          MacBookAir6,2
Processor Name:          Intel Core i7
Processor Speed:          1.7 GHz
I would like to connect two non Thunderbolt displays to my Air. Suggested cables? is there more than one way to do this?
Thank you! Chuck

Check out Thunderbolt (Mini DisplayPort) to dual-DVI:
http://www.monoprice.com/Product/?c_id=101&cp_id=10114&cs_id=1011409&p_id=8118&s eq=1&format=1
(Not a recommendation, just a posiblity.)

E71x Connected in non-compatible mode

Brand new E71x
Vista - 4GB RAM, 250GB HDD, 512MB Video
Nokia PC Suite 7.1.26.0
Connected cable to PC USB 2.0 port
and other end to E71x
In PC Suite main window see "Connected in non-compatible mode". What now?

OK I found the solution on the Asia forums. It's a setting within the phone that dictates what the phone does on a USB cable connection.
Menu>Settings>Config>Data Cable.
Change from Media Transfer to PC Suite and all is well.

Connecting to non-secure listener port over TCPS

Hi,
I am trying to connect to non-SSL port over TCPS.
When I use tnsping, it hangs.
When I do an OCIServerAttach, it hangs.
Client is 10.2
And Database server is 9.2 and higher..
Any way I can find out why this is happening??
-Harsha

Maybe I'm not getting the point, but when you do not use SSL on this port, why do you want to use TCPS. Wouldn't TPC be a better choice?
cu
Andreas

Connecting to Non-Oracle Databases

How can we connect to Non-oracle databases like MS-SQL server using Developer Forms and reports?
can any body please provide steps to do this.

HI
to connect to Non-Oracle Database u have to use OCA ,,,u have to define ODBC data source for the database <source1> u want to connect. to connect from the forms or reports
user name/password@ODBC:source1.
hope this help u
try to look for the developer help

Nokia 6500 Slide Connected In Non-Compatible Mode

Hi,I've cracked my screen and unable to access anything! I transferred my SIM (3 network) to another phone. Although the phone works all my contacts and messages have disappeared. I am quite positive they were saved to SIM. Anyway tried connecting using broken phone with SIM using USB and get message Connected in non-compatible mode and I still cannot access contacts or messages. I'm getting extremely frustrated can anyone help?
Many thanks
Solved!
Go to Solution.

You have a S40 phone, Another thing you can try is, when you are sure the keypad is unlocked, connect the phone and after a few second press the right selection key(the one you usually use to step back or disagree or cancel) which should be cancel. If your phone is anything like my 5200 that will send it straight to connect via PC suite. I think even pressing the red button will do this(Not sure about the red button though but the right selection I'm certain about)
Show your appreciation. Hit that kudos button real hard

What is best way to connect a non-sap sys sending xml idocs to SAP system

Hi Can some one please guide as to what will be the best approach in connecting a NON SAP system to a SAP system.
The non sap system should not be connected to access real time data,it does not support RFC,it can send data in IDOC xml format and i think in teaxt files also.Also I dont think there is any EDI subsystem in place.
There has to be a periodic upload of material data from SAP /stock status/
then there will be incoming data into SAP for sales order/purchase order etc
What would be the best way to connect the two systems,IDOCs with partial EDI looks the best way ,but I am confused as to how will the XML IDOC be converted to normal IDOC and viceversa,how to handle the event triggering mechanism.
If someone has experience in such a scenario ,please help.
There is a option to update the database of the application through SQL also...

Hi,
Check this link.
Web Services from Function Module
it might help u.
Thanks.

Nokia N70 connected in non compatible mode

First here are some facts: Im Using Pc Suite v6.83 on Windows XPsp2. Im using USB cable to connect to my N70.
Now here's the problem: The first time I used PC Suite after Installation, it worked fine. When I used it again the second time, it acted strangely. It didn't detect my phone correctly. It detected the N70 alright, but a baloon popped up from the PC suite Icon on the system tray saying "nokia n70 connected in non compatible mode". Then when I went to the Get Connected wizard, a warning popped up which says "Your phone is in file transfer mode and connot be used with PC suite. quit file transfer mode from the phone if you want to use PC suite". I wonder how could this be since I know that the N70 has no file transfer mode.
Then after finally having my phone detected correctly after diconnecting then connecting the USb cable, my system detected the phone as a digital camera imaging device and as a mass storage device, showing up in windows explorer aside from showing up in the Nokia Phone browser. I Don't think this is a normal bahaviour.
Then the third time I tried to use PC suite, it detected the phone as bing in in non compatible mode again. Yhis time disconnecting and reconnecting the USb cable didn't help.
I found some strange things in the windows device manager too. I found out that under portable device, the N70 was there but disabled and labled as not properly working.
Have you guys encounterd this prblem before? If you did maybe you can help me resolve it. Thanks in advance!

08-Jul-2007 05:32 PM
pmguanco wrote:
First here are some facts: Im Using Pc Suite v6.83 on Windows XPsp2. Im using USB cable to connect to my N70.
Now here's the problem: The first time I used PC Suite after Installation, it worked fine. When I used it again the second time, it acted strangely. It didn't detect my phone correctly. It detected the N70 alright, but a baloon popped up from the PC suite Icon on the system tray saying "nokia n70 connected in non compatible mode". Then when I went to the Get Connected wizard, a warning popped up which says "Your phone is in file transfer mode and connot be used with PC suite. quit file transfer mode from the phone if you want to use PC suite". I wonder how could this be since I know that the N70 has no file transfer mode.
Then after finally having my phone detected correctly after diconnecting then connecting the USb cable, my system detected the phone as a digital camera imaging device and as a mass storage device, showing up in windows explorer aside from showing up in the Nokia Phone browser. I Don't think this is a normal bahaviour.
Then the third time I tried to use PC suite, it detected the phone as bing in in non compatible mode again. Yhis time disconnecting and reconnecting the USb cable didn't help.
I found some strange things in the windows device manager too. I found out that under portable device, the N70 was there but disabled and labled as not properly working.
Have you guys encounterd this prblem before? If you did maybe you can help me resolve it. Thanks in advance!
Message Edited by geronimo on 10-Jan-2008 07:59 AM

Nokia BBA DLL load connected in non-compatible usb...

Dear Guys,
I tried to update my Nokia N95 software, I connected it via Nokia orginal USB cable, when the updating start it wrote 15 minutes remains, and after that my devices hang and this error raised on the tray
"nokia BBA DLL load connected in non-compatible usb mode"
the software updater shows me steps which are turn off my device and reconnect it and press ok.
I did, but it this done many times
I have XP service P3 Prof.
How I will install the update??
Please Help me! it is urgent.
Thanks in advance
Mohammad Abu Hmead

I'm new to this but i think the dll file is not working try downloading the BBA dll. file from dll.com or try searching in google for dll files when you find the website that gives you free dll file download that file to desktop and then add that to the folder in which all files are kept associated to connectivity.

E61i- USB connected in non compatible mode.

My E61i is not getting recognised by the PC. I get the error "USB connected in non compatible mode."

Check under the connectivity menu then USB, that the mode is set to ask which connection you want when connected to a PC. If it is set to mass storage mode it will continue to connect in that mode until you either change it to PC Suite mode or if you set it to ask you always.
Best to set it to always ask then you can select the mode you need at different times.
When connecting o the PC select PC Suite mode
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

4.0EA1 Diff Carts Unable to compare carts when connected as non-owner

Unable to compare carts when connected as non-owner.
Background:
We have 2 identical environments and I want to compare their objects. I login as user3 with select_catalog_role
Steps:
Connect as user3 then populate two carts. One selecting tables from schema1 another cart selecting tables from schema2. Now run Diff Carts.
Behavior:
Text field for Connection is disabled: When there are 2 carts loaded Diff Carts does not allows to compare to Connection. This field remains disabled even when one of the cart tab is closed and Diff Carts is started again.
Unable to compare: Diffing with another cart has connection issues. Diff report shows error (table icon with exclamation mark).
For Schema1 it says
<schema1>.<table_name> using null connection.
Unable to compare objects.
Ensure that you have the required permissions.
You must own the objects or have select_catalog_role.
For schema2 it says
<user3>.<table_name> using null connection.
It is trying to find table for user3 although owner is schema2 in cart2

I am able to reproduce your issues with the diff from cart ui and have filed a bug and identified a fix for it. The issue is that if the combo box is disabled, it remains disabled and the only way to get it enabled again is to restart sqldev.
When diffing between two carts, the connection that is used for the add to cart is used for the authorization so if you add it to the cart from user3, user3 will be used for permissions. This is the intended behavior. have also filed a bug for the error message with "null" for the connection.

"This High-Speed USB device is connected a non High-Speed USB Hub" pops up!

Hi. I have an iPod mini and a Window XP desktop. I've checked my computer as stated in the forum. I know I have a USB 2.0 port according to one of the posts I've read, but I guess it's not a high speed LOL. So I was wondering if it takes more time to fully recharge the iPod mini with a non High-Speed USB Hub than it does with the High-Speed USB Hub.
Windows Home XP w/ non-High Speed USB 2.0 ports Windows XP
Windows XP

hiya!
This High-Speed USB device is connected a non High-Speed USB Hub
hmmmmm.
let's check through some of the possibilities in this document:
Tips for charging iPod and connecting to your computer
love, b

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

Connecting to Non HD TV

Similar Messages

Maybe you are looking for