Connecting to printer via wireless network

I have a hp photosmart 7760 connected to my main PC, which is connected to my home network. That PC is running Windows XP. I just bought a new laptop running vista 64 bit.
When I try to connect, it tells me I do not have the correct driver installed. I downloaded and installed the vista 64 bit driver from the internet but it still doesn't work.
What's work????? Now I'm wondering if I have to install that driver on my main PC....and if so, will that mess up my ability to print from that PC?
Many thanks to anyone that can help me.
This question was solved.
View Solution.

I found a response from Microsoft Answers on how to fix this problem. I haven't tried it yet but I think it will work.
Problems printing from a 64-bit Vista PC to a printer connected to an XP PC
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/e5ecc93d-fd91-403c-93a0-c3792b...

Similar Messages

Connecting MacBook to printer via wireless network

I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

Can't connect PC and Mac to print via wireless network

I have the HP Office Jet All-In-One 6500. I've never been able to get both my Mac and PC to print wirelessly.
First, Mac worked fine wirelessly, then had to print via ethernet for PC. Then that quit working for PC. So I uninstalled printer drivers on PC, reinstalled and it works great printing via the network.
However, now my Mac -- my main computer -- wont print. It spends hours "connecting....." MacBook running Leopard OS 10.5.8.
Why can't both computers access this printer over the same wireless network? Absolutely NO settings were changed on my Mac from the time it worked, until now. Only thing I did was get the PC to work.
I've tried turning the printer off and restarting.... didn't help.
I bought this wireless printer so that both computers could use 1 printer.... I don't want to have 2 printers for my little office! Please help HP!

First, please look on the label underneath the router and let us know the exact model and hardware version of the router. Also check which firmware you are running on the router at http://192.168.1.1/ and verify that you are actually running the most current firmware. You can find out which is the newest firmware on the downloads page of the linksys website.
Second, is it possible that you used the Mac before to connect directly to the internet without the router? In that case it could well be possible that the Mac is still doing so, connecting to the internet itself, bypassing the router and thus terminating whatever internet connection the router established before (which the PCs were using).
Third, after being kicked out, please check the following in a command prompt window on the PCs ("Run..." and enter "cmd"). "ping 192.168.1.1" you should still get replies.
Fourth, what is the IP address and gateway address which the Mac gets when getting online?

I cannot find the 'WPA passphrase' to connect my printer via wireless and cannot find it in Airport utility (MAC says it cannot find any open airports)

MAC OS X 10.6.3 - desktop Mac
I browsed similar questions and saw that someone recommended going to the Airport Utility and then selecting manual set up or something- anyways, it could not find any airports. I have brought my printer from my house as my BF's has died - this is the first time it's asked for a WPA passphrase. We tried a very long series of capital letters and numbers as well as the password for the internet and both times the printer said "invalid passphrase"..... ......

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Problems Connecting Computer & Printer Via Wireless

I've recently just bought a HP Deskjet 2544 printer. I've installed the printer as per all the instructions, however when i tried to install this via the wireless it could not find the computer even though it was connected to the wireless in the house. Because of this problem, I was able to install via the USB cable.
Since installing I can print only via the USB cable. I've went back and tried to connect the computer and the printer via wireless and everything is telling me they are connected (i've ran a systems report and all the lights are on, on the printer), however I keep getting the same messafe "unable to connect to your computer".
Any ideas how to fix this, so that I can print wirelessley?
Thanks
Claire

Hi, this link should help you resolve this problem.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Macbook will not connect to printer via the network

I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
"The "Canon..." printer could not be found in your list of printers" (altho it is listed)
"Unable to get printer status (forbidden)"
"Status: In use, Default" (altho the printer is ready and not in use)
"Operation could not be completed -client-error-not-possible"
Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
The network works well supporting Macbook and several Tivos.
Any help on what I should try next?
Thanks for any suggestions
John

Hello John,
For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
If the printing still fails with the printed added as above, then please reply.
PaHu

HP Officejet Pro 8610 does not connect to laptop via wireless network

I have a new HP Officejet Pro 8610. It is connected wirelessly to my home network. My laptop, running Windows 7, is connected to the same network, but cannot find the printer. I have tried turning everything off and resetting the router, but still have the same issue - my laptop cannot find the printer.
I am able to email a document from my laptop to the printer using the printer's email address.
What can I do to get my laptop to find the printer on the wireless network?

Hey!
This is an issue with your wireless, you either have to get your router looked at you are looking at relocating your printer and your router so they are closer together. If you are able to connect all of your devices to the network fine when you are in the same room; Call HP Technical Phone Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

No longer able to print via wireless network

I have an HP OfficeJet 6500A Plus E710N and have had it connected to my wifi network and working properly for some time now. Recently, print jobs would queue up and nothing would print b/c it said the printer could not be found on the network.
I deleted the printer from my print preferences and tried to reconnect, but I can't see the printer on the network.
I have powered off the printer, reset the wifi conncetion (printer still sees router), and properly entered the WEP key.
Does anyone have any suggestions?

I inadvertently changed my networks name from "esteroal" to HOME-5022. Both were listed thru EWS. Now I can no longer access my printer network or EWS since I have no IP address for the new network (HOME-5022). HELP

Using a printer via wireless network

I am new to MAC and am not quite sure what I'm doing with it yet! My question is how can I make my Mac book recognize my printer through my wireless network. I have 2 other PC's and a labtop in my home that all recognize each other and use the same printer. Is there a way to do this with my Mac or do I need the "airport" thing I keep reading about?

I'm also new to this Mac environment and I'm having the exact problem as you. I cannot install to my windows shared printer (Canon LBP3050). Hope somebody can explain a step by step guide to installing Windows Shared Printers. Tried this done that but nadaa.. Pleaaaseee advice.

Can't connect to Powerbook via wireless network......

I have an iMac and a Powerbook and a wireless router. From the Powerbook, I can connect to the iMac's hard drive wirelessly by going to the network pane then clicking on Jason's iMac G5, entering the password, etc. But, I can't do the oppostite. I would like to access the Powerbook's hard drive from the iMac but everytine I try to do so I get an error message that says "Connection's Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and try again." And yes, in Sys Prefs, I have Personal File Sharing turned on on both computers BUT, everytime time I try to connect to the PB via the iMac, file sharing turns back off on the PB and I have to turn it back on....... any help would be appreciated. Thanks, Jason
Powerbook G4, iMac G5 Mac OS X (10.4.4)
Powerbook G4, iMac G5 Mac OS X (10.4.4)

I opened console.app and this is what it said:
Mac OS X Version 10.4.4 (Build 8G32)
2006-01-16 01:42:08 -0500
2006-01-16 01:42:10.906 SystemUIServer[78] lang is:en
Jan 16 01:43:54 jasons-powerbook-g4-15 crashdump[201]: AppleFileServer crashed
Jan 16 01:43:55 jasons-powerbook-g4-15 crashdump[201]: crash report written to: /Library/Logs/CrashReporter/AppleFileServer.crash.log
any suggestions?
thanks, jason

Connecting computer & printer with wireless network

Operating with a MacBook Pro and a HP Photosmart 7510.
Both devices on are on the same newtwork but as I am attempting to install the printer on my computer it is not picking the printer up?!

What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problem connecting laptop to printer via wireless connection

I installed my HP Photosmart D110 series and the printer is not detecting my wireless internet (which is a Verizon Wireless card) . I only know the basics when it comes to computers, internet, etc. Therefore, this might be a completely stupid question, but is it possible to connect only through my Verizon card or do I need to purchase a router as well?
When I print my Wireless Network Test Report from my printer it tells me that it's recommended to change my network name to make it unique? I have no idea how to do this. And is it even applicable here?
I would greatly appreciate some feedback here.Thank you!

OK,
1. On the printer: Setup > Network > Reset network Defaults
2. On your PC, go to Start > Control Panel > Network and Sharing Center. Look for a wireless network that starts with 'hp" or "HP". Join it. There is no password. On the printer: Setup > Network > WIreless Network Test.
3. Now, in Start > Control Panel > Printers, Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I suddenly can't connect to printer on wireless home network.

I have an Officjet Pro L7680 and we just had a new cable company installation in our house. We have 1 desktop and 2 laptops. All three share this printer and we had no problems. Since the install, 1 laptop won't connect to the printer. The cable co. tech support was not able or willing to help, saying it's not their fault. I get a message that the printer is offline, when the other computers have no problem printing.
This question was solved.
View Solution.

On the problem computer, go to Control Panel > Printers and delete all instances of the printer.
Next, print a Wireless Network Test from the front of the printer (Network menu). Note the printer's IP address.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

C4750 Connection via wireless network to my Mac

My C4750 Photosmart Printer is connected to our home wireless network and the home PC can print to it no problem. I'm trying to set up my Mac to be able to print to it also when the Mac is connected to the same home wireless network.
From the System Preferences and Printer menu on the Mac, I can see the printer and can see it sitting "idle" and when I try printing a job it says "In Use" and the print job appears on the Printer icon with the "1" indicating it has one job waiting and it says "Connecting to Printer" but the print never starts.
Any help would be appreciated.

Hi MaciHawk,
I did some investigating and I found that no actual software and driver package is available for this operating system on your Mac. We can try to check the Apple updates for anything new or we can try the HP Printer Drivers v3.0 for OS X.
Other than that, the only thing else we can do is upgrade the operating system on the Mac.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Connecting to printer via wireless network

Similar Messages

Maybe you are looking for