Connecting to router

how do i connect to my router from my computer so i can foward ports? WRT54G version 8. i try using 192.168.1.1. i doesnt work like on my old router, is there any way to connect to it? (please name multiple ways if there is) (also if there are free programs i can use to connect to it as well)

By default the Ip of the router is 192.168.1.1 ..... if you are not able to use that Ip .... check the Ip address from DOS window ..... using the gateway address .... open the setup page ....
See if it works ...

Similar Messages

Airport is connected to router but no internet

I have seen many forums and posts on this and nothing seems to help so i will explain my own situation and see if it helps. I am using white macbook, purchased from the apple store in september '07. I am running os x 10.6.8. The router i am using is a D Link DIR 615. The line of connection is as follows: cable from wall to modem, modem to router, and devices connect to router via wireless.Here is my dillema. Airport connects to the router, full bars, i get internet conection for about 2 minutes, then i get nothing. Airport is indicating that I am still connected to the router, and I have an IP (not the 167 or self assigned, it says im good to go). For me to get back on the internet i have to turn off the airport, turn it back on and reconnect to the router. I have tried to renew DHCP lease, i can when connection is good but after the 2 minutes i can't. I tried taking the network off my keychain to where i would have to type in the password each time, that didn't do it. I changed the password on the router, as well as other settings, that didn't do it. The reason this puzzles me and make me believe that it is my own airport is because multiple machines in our household work fine on the router, including a macbook pro form either 09 or '10, an iPhone 3G S, and an android smart phone. other people have come over and used our wireless with no problem. My computer is the only one that does this. And the shame of it is, I am a graphic designer and I use my computer the most in the houshold, and I need the internet connection the most. if anyone has any idea, and I am completely open to giving more information if you need it. I understand it could be extremely technical and it is already beyond my reach.

Hi Kelly Chant-
Any chance that the little AirPort antenna in the back has become dislodged? Try powering down everything on the network including routers and/or switches, wait 10 minutes, turn it all back on and see what happens.
Luck-
-DP

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

HP Deskjet 4630 e won't connect to router

I have tried every method suggested for setting up the wireless connection between router and printer. I have succeeded in getting the printer to function using a USB but wish to print wirelessly.
The printer does not "see" the router. I have one question, is the SSID the same as our network name? Or is it the name on the back of the router? I've been inputting the name we gave our network and that password.

There are no SSIDs listed at all?
From another wireless device as the computer or a smartphone can you see more than your router's SSID or is this the only listed network in your area?
(In order to deny any issue with the wireless radio of the printer.)
If ther are multiple networks in your area but the printer sees none, try printing a Wireless Test Report and let me know the results of the test. That can be done by following Step four: Print and evaluate a Wireless Network Test below:
http://support.hp.com/us-en/document/c03916067/
A dual band router is a router who transmit in both the 2.4 and the 5.0 GHz bands, as I can see by your router specifications it is not a dual band router.
Please let me know the results of the Wireless Test,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Problem connecting to router HP Photosmart e-All-in-One

Trying to install new HP Photosmart e-All-in-One. Printer will not connect to Router. I select wireless network, feed in password. Screen then says printer error and asks to be turned off. Code B8126AD6 flashes up for a short period. When feed in incorrect password will tell me incorrect, however, if correct password inputted always has a problem

I had a similar issue with my Officejet 7410 All In One Wireless and my new Linksys Router with WPA security.
Going through the Network Setup from the printer control panel finds the signal, allows me to enter the security code, accepts the code like all is well but upon pushing the enter button it goes back to the menu selection screen.
No message that it didn't connect, or that it was successful.
Changed the router's security settings to "Open" and the printer is now connected to the network.
Windows 7 and downloaded the full feature software.
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Model HP G60 Notebook PC
System Type x64-based PC
Processor Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.63, 3/8/2010
Hardware Abstraction Layer Version = "6.1.7600.16385"

Airport (new applemac pro) connection to router issues?

Hi all
I know this subject as been aired many times, and I have scoured the forums for an answer but there does not seem to be a definitive answer. But here goes with our particular issue. We bought a new 15inch apple mac pro laptop a few days ago. Being PC users this was a big step for us.
Setting it up was not a problem but what is an issue is the so called Airport hardware/software.
I use a Belkin N wirelss modem/router F5D 8633-4 uk. This connects my PC and 2 pc laptops (PC and 1 laptop us ethernet cable, the other uses wireless connection). all works wonderfully well.
Having set up the account in the apple mac pro as instructed, we find that:
*we had to change from PPPoA to PPPoE
*the ethernet connection is fineish
*the wireless connection is not and cannot find our network. It shows it on the list but refuses to ackowledge it, it greys out?
It does for some odd reason connect via PPPoE but shows no network and thus when I check my PC for connected devices the apple mac does not show up. It may be using another network but I have no access to any other than the one we use at home.
I spoke to the people at Belkin who took me through the ethernet connection and helped sort out an issue re outgoing mail (it would receive and not send). The ethernet connection will now do both. Issue resolved.
However, not so through Airport.
We have tried adding new account, deleting accounts and even deleted the keychain as is suggested in these forums.
I have spoken to apple helpdesk but to no avail. Might need another go.
Basically all I am after, is that the laptop through Airport connects to the network and recognises it as such.
Any help gratefully recieved.
Keith

I was given this as a solution from another forum, it seems to work:
The only place you need to be making changes is in System Preferences > Network > Airport
However, before you do that, connect the MBP to the Modem/Router with ethernet cable.
Can you access the internet and do everything else that you need to?
Go through the Wireless settings on the router again, and remove any security (purely temporary).
Go back to the Mac and set up the Network > Airport (it may now be called Wireless) for your wireless network.
Once the security has been removed and you have restarted the router, can you connect to the wireless network?
If you can, go back and add security to the wireless network, WPA2 should do, make a note of the password/those numbers, and try again.
The PPPoE thing should only apply to the Modem side of the Modem/Router, to connect the Router to the DSL line and should not apply to anything on the Router side of the device. All your computers and network printers will not be concerned anything to do with PPPoE. The Router side of the device deals only with regular TCP/IP and wireless.
The wireless side of the MBP is not concerned with how the Modem talks to the outside world (ISP). If it did, then you would constantly have to reconfigure your wireless network on the MBP every time you tried to connect to a different wireless network.
Hope it helps.

Frustrated - Can't connect to router with laptop after disconnect, other devices work fine.

I have a RevI Actiontec router with dual antennas(not sure of firmware as I am not at home). My wife can be on her laptop all day, then when I come home with my IPad, it make her lose connection to the router. The router still connects to my iPhone 4 and iPad (both with iOS 6.0.1), but she is unable to connect to router at all. Everything continues to function normally on my Apple devices, so we are still connected to the internet. I have a laptop as well, and when this is happening, both of the laptops stop connecting, but the apple devices and our Toshiba TV and BluRay players continue to function normally. As a temp fix, I disconnect internet from my iPad and restart the router. It works until we try to run both at the same time.
I am mildly computer literate, though I know little about network setups beyond security, MAC filtering, and other slightly advanced setup stuff.
This is really frustrating and seems to be getting worse. We used it like this in our new house for several months before this started happening.

Also check to make sure neither of the devices are set to use a static IP address.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Wi-fi bridge between two routers TP-LINK WR841ND (WDS). HP 1536 dnf MFP connect to one of this routers (copper). My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect to router across WiFi.

Hello.
I have wi-fi bridge between two routers TP-LINK WR841ND.
The name of this technology - WDS.
HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
Second device (my NETBOOK) connect to second router (WiFi).
I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
to router across WiFi.
Please, help!

Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
Does AirPrint work?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't Connect to Router Manager

I want to review the Router Statistics but can't get connected.
I have typed in the address,
http://192.168.1.1/
Also tried via the Router Icon &
http://voyager220v.home/
but get message "Can't Connect to Router"
All other web sites are easy to get into.
Any idea of why this problem is occurring?
Solved!
Go to Solution.

Have you tried rebooting the Voyager or resetting it to default by pressing the recessed reset button.
Are all the lights on at the front, and the correct brightness?
Failure of the Voyager 220V power supply was fairly common, but any 12V regulated power unit will work, if it has failed.
The Voyager range of modems were some of the best, I still have quite a few as standby routers and extra wireless points.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Connected to router but cannot get on the internet

Hi,
I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
Can anyone help?
Thanks

Couple of things to check:
1) Are you using the wireless passkey that is on the Homehub label to log on with?
2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
Once done try and connect to internet.

How I can connect to router without enterign enable- privilege mode 15?

I don't want ot enter enable mode->privilege mode 15
I want to connect from console to router with entering privelege username and connect to router.
How I can do this?
Thank you

I should do this with aaa-new model and use local username and password

Connecting Wired Router to Time capsule?

Ok so i was wondering if anyone on here knew if i could connect like a regular linksys router to my Time Capsule and have it access the internet. See my issue (and I'm sure I'm not the only one) Is that I have more devices and only 3 ports to plug devices in to the router using ethernet cables. My question is if i Connect a router to the second port on my Time Capsule can I use the ports on the Linksys to connect devices and allow them to connect to the internet?? Thanks for any help you can give me. I am hoping it would just be that easy but if anyone has any suggestions feel free thanks

Welcome to the discussions!
You can connect the Linksys to any of the LAN <-> ports on the Time Capsule. The important thing here though, is that the Linksys must be configured in Bridge Mode to do what you want.
Most Linksys models can be configured by plugging them directly into your computer and then entering their default IP address in your browser address bar. It's probably 192.168.1.1
Check with Linksys support if you are not sure how to configure the device as a Bridge.
You could also plug devices into any of the other LAN ports on the TC.

WRT54G software installation now prevents internet connection WITHOUT router

Since installing the software/drivers that were on the installation CD I can no longer connect to the internet when NOT using the router. i.e. if I connect my modem directly to my PC it recognises the modem is connected but then gives me a "limited or no connectivity" message and I cannot connect to the internet at all. However, if I connect my modem to the router and then connect the router to my PC I can get an internet connection just fine. Whatever software was installed has prevented all internet connectivity when not using the router. Does anyone know how I can get a direct modem-to-PC connection working again? Thanks

start ==> control panel ==> system ==>hardware ==> device manager ==> network adaptor ==>ethernet adaptor ** right click on that adaptor ==> go to properties==>go to advanced tab==> linkspeed & duplex==> changed card speed to 10 mbps half duplex

TS3274 Suddenly connection to router is lost & cannot reconnect?

Suddenly my connection to router is lost. I put in security, etc, but it will not connect. My other IPad works fine. Help please?

It's Sheila. I solved the problem by rebooting the iPad. Voila. It worked.

Window Server cannot connect to Router?

I have installed a windows server 2012 r2 datacenter on virtual box using windows7. I installed AD Ds, DHCP and DNS on it. To install DHCP on window server I first disabled the DHCP service on my router and then on server I changed the ip address to static(10.1.10.2)
and added default gateway as 10.1.10.1 (IP address of router). But by doing that my server and other computer connected to network are not connecting to router.(i tried pinging router)? I am a student and I am working on a test lab using d-link router which
is further connected to main house router.
Thanks

Hi please check this artical hope this helps
https://blogs.oracle.com/fatbloke/entry/networking_in_virtualbox1

How do I connect WRT54GS Router to Talk Talk MT882?

I was able to set up my Talk Talk wired SmartAX MT882 modem but I now want to use my Linksys Wireless-G WRT54GS Broadband Router but it can't connect.
I entered the Talk Talk setup using the setup cd.
I then used the Linksys setup cd to connect the router.
But part way through the setup I get a message saying:
The router is not able to connect to the internet. Try turning the cable/DSL Modem Off and back On again.
Did that and nothing changes. Still the same message.
I've seen on a couple of forums that you should change the internet connection type of the SmartAX MT882 to Pure Bridge and the Linksys WRT54GS to PPPoE.
That doesn't change anything.
After having connected the Modem to the computer with the Ethernet cable vis the ethernet port I then take that out and place it into the internet port on the router and connect the other ethernet cable from one of the numbered ports(1-4) on the router to the ethernet port on the modem.
It seems that the modem has to be connected directly to the computer?
I'm completely stuck on what to do.

To get the Huawei SmartAX MT882 and the Linksys WRT54G to work together, you need to disable a DHCP server on one of the two (cause they are both routers, in this case we will disable the DHCP on the WRT54G). First leave the MT882 turned off and disconnected from the network for now. Connect to the WRT54G at http://192.168.1.1 with username and password set as "admin" unless you changed it beforehand. On the first page disable the DHCP server and change the address of the WRT54G to 192.168.1.200 (We are going to keep the IP within the same subnet as the MT882 but outside the range of the MT882's DCHP range). You will also need to switch the Advanced Dynamic routing on the WRT54G to the Router mode meaning that there is another router on the network. Also in the advanced dynamic routing mode turn on the the Dynamic Routing (RIP) to LAN+Wireless because we will plug in the MT882 into the LAN port (Not the WAN/Internet port) of the WRT54G. Disconnect from the WRT54G network. Plug in your MT882 directly into the computer via Ethernet or USB and log into the administration panel via http://192.168.1.1 if connected via Ethernet or http://192.168.1.2 if connected via USB. User name and password are both "admin". In the MT882 administration in the advanced setting turn on/enable RIP (Dynamic routing) for eth-0 (its most likely already enabled for ppp-0, ie. your provider, but now it is enabled with the Ethernet too). Now connect the MT882 Ethernet cable directly into one of the WRT54G's LAN ports and connect to the WRT54G with your computers via wireless or lan. Now once the computers are connected they will ask for an IP address and the WRT54G will forward them to the MT882's DHCP server for an address and thus you will get multiple computers through wireless connected to the MT882 and the "Internet". Good luck.

Connecting to router

Similar Messages

Maybe you are looking for