Connecting to SLM2048 switch through management console XSLT Processor problem
When I try to connect to my SLM2048 I receive the following message: "your browser does not seem to support xsltprocessor"
How can I resolve this ? I'm using IE 11 and Chrome 40.0.2214.93 m
Hi Rlokar001,
I am afraid this switch is not compatible with new browsers anymore. If this is not one of SG200 switches the only solution could be old browser and fix. Please take a not of the zip file with fix documents:
https://supportforums.cisco.com/discussion/10771501/srw248g4-issues#3103511
Regards,
Aleksandra
Similar Messages
-
I can not access the switch through the console (solved)
Hello,
I'm having a problem.
I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures.
The HyperTerminal settings
error:
If anyone can help me?
Thank you and excuse the bad English.Hello Rumenigue,
It looks to me like you are using a console cable. The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself.
Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
Hope I have helped,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center -
Business Objects Management Console - Shedule Jobs Problem
Hi,
I am novice in Business Objects technology and i am facing a problem that i describe next:
The Jobs Scheduled are not running but if we execute the Job manually the Job runs normally.
Do you have any idea about what can be wrong? Is there any logs that can be checked?
Thank for your efforts.
Best Regards
João FernandesHi Rim and Sebastian,
Thank you for your interest in my problem.
I am running Data Integrator Management Console and the version is Business Objects Data Integrator 11.7.2.1
I check the starting date and there is none because we want to run the job in a daily basis.
I hope this information could help you to help me.
Best Regards
João Fernandes -
Connecting to Oracle 10G Enterprise Manager console
Hi SDNers,
We've recently successfully upgraded Oracle from 9.2.0.7 to 10G (as part of a Solution Manager 4.0 upgrade) and I'm now interested in getting started with the new Oracle 10G Enterprise Manager (web-based console).
I'm at the point where I have EM up and running, but it is not connecting to our SAP database because it is trying to connect to port 1521, whilst the database uses 1527.
Does anyone know how to change the EM configuration so that it points to port 1527 and therefore connects to the SAP database?
Thanks in advance,
Arwel.Yep!
Here's a copy of its contents:
Thanks,
Arwel.
tnsnames.ora Network Configuration File: d:\oracle\SOL\102\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
SOL.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = lvrplsolman)(PORT = 1527))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SOL)
EXTPROC_CONNECTION_DATA.PRINCES.CO.UK =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO) -
The message states: The page isn't redirecting properly. Firefox has detected that the server is redirecting the request for this address in a way that will never complete. * This problem can sometimes be caused by disabling or refusing to accept cookies.
Cookies are enabled.
Using Firefox version 3.6.12forget it....got it figured out.
thanks! -
Error in connect to Enterprise manager console
I am getting the following error message when trying to connect to oracle 9i Enterprise manager console with the following username and password: sysoper/oem_temp as sysoper AND sys/password as sysdba
Error Message :ORA12532:TNS:Invalid arguement
I installed oracle 9i in my home PC.
Can any one Please Help me
Thanks in AdvanceHi all
Are you trying to connect using stand alone? or using and OMS?
I tried to connect using stand alone, i didnot change any system usernames and passwords (Defaults)
Username: System
password: Password
service: orcl
connect as : Normal
I also tried to connect as
username : Sys
password: password
as: sysdba
Still getting the same Error
THANKS ONIL -
Management console problem after installing recommended patch cluster
Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O -
Unable to connect to Exchange 2010 Management console after - Exchange 2010 SP3 Rollup 7
We have been having issue with our Exchange Server 2010's Transport Service failing due to a database corruption. I was hoping that maybe applying the Roll-up 7 for Exchange might fix this issue, however after applying the patch we are unable to start the
MSExchangeMailboxAssistants "Error 1053: The service did not respond to the start or control request in a timely fashion."
Then I notice that we were unable to connect to the Management Console or through PowerShell.
Event 1000, Application Error
Faulting application name: MSExchangeMailboxAssistants.exe, version: 14.3.210.2, time stamp: 0x53e2bf34
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x5315a05a
Exception code: 0xe0434f4d
Fault offset: 0x000000000000940d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
PowerShell error:
Exception calling "TryLoadExchangeTypes" with "2" argument(s): "Could not load file or assembly 'Microsoft.Exchange.Man
agement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name va
lidation failed. (Exception from HRESULT: 0x8013141A)"
At C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1:75 char:92
+ $typeLoadResult = [Microsoft.Exchange.Configuration.Tasks.TaskHelper]::TryLoadExchangeTypes <<<< ($ManagementPath, $t
ypeListToCheck)
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodExceptionHi,
Please try the following steps to narrow down the issue:
1. Uninstall and reinstall .NET package in Exchange server.
2. Under location C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG, took a copy of Machine.Config.default, renam it to Machine.config and copy it under this path again.
3. Do IIS reset by running iisreset from a Command Prompt window.
4. Reboot the server and verify whether the Exchange services are started.
Regards,
Winnie Liang
TechNet Community Support -
Service manager console can't connect to Service manager data warehouse SQL reporting services
When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND. -
Management console connection refused
When I tried to use the management console to connect to JRockit on another
machine, I got the error at the end of this email. I downloaded a
license, the application is definitely running and listening on 7091. Could
someone provide some insight into this error?
Thanks
ava.rmi.ConnectException: Connection refused to host: 127.0.0.2; nested
exception is:
java.net.ConnectException: Connection refused
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:574)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:94)
at
javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Ljava.lang.Object;)Ljavax.management.remote.rmi.RMIConnection;(Unknown
Source)
at
javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2229)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:229)
at
com.jrockit.console.rjmx.RJMXConnection.setupServer(RJMXConnection.java:617)
at com.jrockit.console.rjmx.RJMXConnection.connect(RJMXConnection.java:175)
at
com.jrockit.console.rjmx.RJMXConnectorModel.connect(RJMXConnectorModel.java:387)
at
com.jrockit.console.browser.BrowserAbstractNode.connectNode(BrowserAbstractNode.java:102)
at
com.jrockit.console.application.AllUIOperations$4.doAction(AllUIOperations.java:127)
at
com.jrockit.console.application.AllUIOperations.executeAction(AllUIOperations.java:664)
at
com.jrockit.console.application.UIOperation.actionPerformed(UIOperation.java:311)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at
javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at
javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at
javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at workshop.core.plaf.JbMenuItemUI.doClick(JbMenuItemUI.java:640)
at
javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at
javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:942)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3093)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
Caused by: java.net.ConnectException: Connection refused
at
jrockit.net.SocketNativeIO.connect(Ljava.io.FileDescriptor;Ljava.net.InetAddress;III)I(Unknown
Source)
at java.net.AbstractSocketImpl.doConnect(Ljava.net.InetAddress;II)V(Unknown
Source)
at java.net.PlainSocketImpl.doConnect(Ljava.net.InetAddress;II)V(Unknown
Source)
at
java.net.PlainSocketImpl.connectToAddress(Ljava.net.InetAddress;II)V(Unknown
Source)
at java.net.PlainSocketImpl.connect(Ljava.net.SocketAddress;I)V(Unknown
Source)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:178)
at
sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at
sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:569)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:94)
at
javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Ljava.lang.Object;)Ljavax.management.remote.rmi.RMIConnection;(Unknown
Source)
at
javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2229)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:229)
at
com.jrockit.console.rjmx.RJMXConnection.setupServer(RJMXConnection.java:617)
at com.jrockit.console.rjmx.RJMXConnection.connect(RJMXConnection.java:175)
at
com.jrockit.console.rjmx.RJMXConnectorModel.connect(RJMXConnectorModel.java:387)
at
com.jrockit.console.browser.BrowserAbstractNode.connectNode(BrowserAbstractNode.java:102)
at
com.jrockit.console.application.AllUIOperations$4.doAction(AllUIOperations.java:127)
at
com.jrockit.console.application.AllUIOperations.executeAction(AllUIOperations.java:664)
at
com.jrockit.console.application.UIOperation.actionPerformed(UIOperation.java:311)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at
javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at
javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
JeffI did that as well, but it doesn't change the error message beyond the IP address which is refusing the connection:
Could not open Management Console for testfix.dhcp.isgenesis.com.
java.rmi.ConnectException: Connection refused to host: 10.0.129.82; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:574)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:94)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2239)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:229)
at com.jrockit.console.rjmx.RJMXConnection.setupServer(RJMXConnection.java:616)
at com.jrockit.console.rjmx.RJMXConnection.connect(RJMXConnection.java:194)
at com.jrockit.console.rjmx.RJMXConnectorModel.connect(RJMXConnectorModel.java:209)
at com.jrockit.mc.browser.views.JRockitBrowserToolkit.connect(JRockitBrowserToolkit.java:372)
at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:35)
at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:56)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
-- Caused by --
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:516)
at java.net.Socket.connect(Socket.java:466)
at java.net.Socket.<init>(Socket.java:366)
at java.net.Socket.<init>(Socket.java:179)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:569)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:94)
at javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Unknown Source)
at javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2239)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:229)
at com.jrockit.console.rjmx.RJMXConnection.setupServer(RJMXConnection.java:616)
at com.jrockit.console.rjmx.RJMXConnection.connect(RJMXConnection.java:194)
at com.jrockit.console.rjmx.RJMXConnectorModel.connect(RJMXConnectorModel.java:209)
at com.jrockit.mc.browser.views.JRockitBrowserToolkit.connect(JRockitBrowserToolkit.java:372)
at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:35) -
Management console fails connecting to Management server.
I have installed Oracle 9.2 on Red Hat Advanced Server V2.1.
Also installed Management server and client software on the system.
Started everything up: oemctl start oms, agentctl start agent, apachectl start...
Run Manager Console on Linux machine (i.e. locally)
Runs successfully - connecting stand-alone
Runs successfully - connecting to management sever
Installed client software on a Windows NT PC.
Runs successfully - connecting stand-alone
FAILS - connecting to Management server
On another NT PC, try running web interface to Management server
FAILS - Same error as when using thick client.
Failure is the same in both cases: The exception (java.lang.NullPointerException) occured.
Failure of both of these suggested a server issue...
Don't know where to find management server logs?
Looking at $ORACLE_HOME/Apache/Apache/logs/error_log seems unable to find files, e.g.:
[Mon Nov 25 10:01:46 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/readme/emreadme.htm
[Mon Nov 25 10:01:57 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/java/awt/KeyboardFocusManager.class
[Mon Nov 25 10:02:11 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/oracle/ewt/alert/resource/AlertBundle_en
_GB.class
[Mon Nov 25 10:02:11 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/oracle/ewt/alert/resource/AlertBundle_en
_GB.properties
[Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/oracle/sysman/vt/console/app/ConsoleBean
Info.class
[Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/sun/beans/infos/ConsoleBeanInfo.class
[Mon Nov 25 10:02:15 2002] [error] [client 192.0.0.120] File does not exist: /u0
1/app/oracle/product/9.2.0/oem_webstage/oracle/sysman/emSDK/client/appContainer/
WebApplicationBeanInfo.class
I have tried reinstalling Oracle website, however this made no difference.Can you ping the server which is running OEM from the client NT machine?
Are you trying to connect using DNS or IP?
Verify that this works first. -
Hello :)
I have to ask because this issue is boring me a long time ago :(
From time to time when I connect to virtual machine from failover cluster manager console I've get virtual machine connection screen (console) which is reduced only to upper left quorter of full screen. There is no scroll bar ... If I live migrate
VM to another node (or restart VM on same node) and reconnect, console screen is displayed ok (ie all console screen is visible).
It is happening regardless of OS version installed into guest VM: 2003 R2, 2008 R2, 2012, 2012 R2).
I've check inside VM ( I can see that integration services are installed and running but when I click onto console window with mouse I've get message:
"Virtual Machine Connection
Mouse not captured in Remote Desktop session
The mouse is available in a Remote Desktop session when
integration services are installed in the guest operating
system...."
From SCVMM console I can see that IC version on guest VM is: 6.1.7601.17514
I would like to know what is going on and is there any way how can I detect those situation or even better how to prevent it ?
Thank you for any idea.
Best regards
NenadHi Nenad,
As you mentioned you have tried 2003 R2, 2008 R2, 2012, 2012 R2 guest vm, but all this do not work properly, With Server 2003 platform the 2008r2 Hyper-V the 2003R2 are not
supported, in your case you must update to Windows Server 2003 R2 with Service Pack 2.
Server 2012 as guest vm on 2008r2 you must install the following hot fix:
You cannot run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
https://support2.microsoft.com/kb/2744129?wa=wsignin1.0
Server 2012 is the last version of Windows that will be supported as a guest operating system on 2008r2 Hyper-V therefore the 2012r2 guest vm is not supported.
Please use the following command can query all guest vm’s IC version, please compare this problematic vms IC version with functioning vms.
The following powershell command can be used to display the version of integration services installed on all VMs on the Hyper-V host:
PS C:\Users\administrator> get-vm | ft name, IntegrationServicesVersion
Name
IntegrationServicesVersion
TestVM2012
6.2.9200.16433
SQL01
6.2.9200.16433
SQL02
6.2.9200.16433
SCVMM01
6.2.9200.16384
SCVMM02
6.2.9200.16384
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Can't connect to Enterprise Manager Console.
Hi..
I started the enterprise manager console via the command " @emctl start dbconsole "
when i try to connect to the web browser based app running on port 1158
(according to contents of install/portlist.ini ) I get the error
You have chosen to open em which is a: application/octet-stream from http://localhost:1158/em.
This happens on firefox. On IE i just get garbage.
>>>>>
c:\app\Ryden\product\11.1.0\db_1\bin>@emctl start dbconsole
@emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
Copyright (c) 1996, 2008 Oracle Corporation. All rights reserved.
https://dell-laptop2:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The requested service has already been started.
>>>>>
any suggestions much appreciated.
thanks!
chris
Chris Bedford
Founder & Lead Lackey
Build Lackey Labs
http://buildlackey.comShow us the output of
emctl status dbconsoleMost of the times, EM stops with DGCP being enabled on the system after the db's creation. I faced alot of it just 2 days ago when 2 of my boxes stopped EM. So show us the output of the above command and to have an idea of basic EM troubleshooting, read this,
http://oracle-base.com/articles/misc/BasicEnterpriseManagerTroubleshooting.php
HTH
Aman.... -
Oracle ESSO, Logon Manager Console couldn't connect to repository ORA-01017
I installed Logon Manager Console on my Windows XP SP3 and try to connect to repository (Oracle DB 11g) with instanse name:
Provider=OraOLEDB.Oracle;Data Source=MYDB;User Id=user;Password=password;
Repository type: Oracle Database
And get following error: ORA-01017: invalid username/password; logon denied
But i can connect to database with sql developer. Same DB, user and password
Please help, what i'm doing wrong?
Edited by: LITBe on Sep 2, 2010 4:25 AMUpdate:
If I attempt to connect with instanse name:
Provider=OraOLEDB.Oracle;Data Source=myOESSO;User ID=system;Password=oracle;Integrated Security=no;
Repository type: Oracle Database
I get another error: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
If
instanse name: Provider=OraOLEDB.Oracle;Data Source=myOESSO;User ID=system;Password=oracle;
Repository type: Generic Database
I get another error: ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
Maybe this help someone to understand what happening because i don't understand... -
Management console-connection time out please help
after Composite environment installation,first time I am trying to open the management console. It throws a dialog window connection error. and in the text message connection to <host name and nr > failed.
In the exception message, i can see connection time out:connect
Here is the log
java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initStreamsFromSocket(HTTPSocket.java:648)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initializeStreams(HTTPSocket.java:470)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getOutputStream(HTTPSocket.java:427)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:355)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:548)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
at com.sap.managementconsole.soap.sap.sapcontrol.SAPControlStub.getInstanceProperties(SAPControlStub.java:1248)
at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.getInstanceProperties(SAPSOAPDataLoader.java:823)
at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.<init>(SAPSOAPDataLoader.java:87)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sap.managementconsole.common.SapControlInterfaceFactory.getControlInterface(SapControlInterfaceFactory.java:91)
at com.sap.managementconsole.common.DataLoader.createControlInterface(DataLoader.java:313)
at com.sap.managementconsole.common.DataLoader.startup(DataLoader.java:232)
at com.sap.managementconsole.common.DataLoader.access$100(DataLoader.java:64)
at com.sap.managementconsole.common.DataLoader$1.execute(DataLoader.java:437)
at com.sap.managementconsole.operations.AuthorizedOperation.execute(AuthorizedOperation.java:38)
at com.sap.managementconsole.common.DataLoader.reinitialize(DataLoader.java:444)
at com.sap.managementconsole.common.DataLoader.run(DataLoader.java:542)
at java.lang.Thread.run(Unknown Source)Hello,
Can you post the std_server0 log ?
Regards,
Siddhesh
Maybe you are looking for
-
Dear All, Last Year 2009-10, Raised a DownPayment Invoice for 3,00,000/- & made an outgoing payment for that. After adjusted 2,25,000/- in Invoice & concluded that remaining amout 75,000/- wont come back(Like bad Debts). So now I want to close this
-
Hi, i have a LOV which needs to show the data based on data in another field. When i open the page all the fields are defaulted, but my lov doesnt work, it works when i change the data in the other field, But after that whenever i come back to the sc
-
Weird problem using external tables
Hi, Please move my message to the correct forum if it is not in the right one. Problem: I have the following external table definition: CREATE TABLE blabla ( AANSLUITINGSNR_BV NUMBER(15), BSN_NR NUMBER(9), DATUM_AANVANG_U
-
I ran out a sequence this afternoon and certain clips do not have audio. But when I bring that ran out clip back into Premeire CC the clips that did not have audio when playing in quicktime player or any other player such as Squeeze9 they do play tho
-
Yeild and Activity Types are not coming on confirmation
Dear Sir's Hope everyone fine by the grace of GOD. Friends i am facing a problem while doing Confirmation of production order in T.Code Co11n .Yeild(net production) is not picking from the Production order and also Activity types are not coming while