Connecting to someones computer

Does any body know if its possible to share other peoples files on different computers without loosing your files on your ipod. I sometimes want to connect to my friends computer but it keeps telling me I will loose my files.
is ther any way around this????

PT wrote:
mmu1253397 wrote:
What you are trying to do is also illegal.
Perhaps, but nothing in the original post indicated anything illegal to me.
While you can speculate what the original poster is doing is illegal, nothing from that post points to illegal activities. All the original post mentions is "sharing other people's files". Do you have first hand knowledge of what exactly those files are and know them to be illegally shared?
Perhaps he is a musician collaborating on a new song with another musician who have a need to exchange song files as part of that collaboration. Perhaps he is sharing home movies with someone else. Maybe his friend downloaded some public domain movies and wants to give him copies.
Cheers,
Patrick
I did jump to a conclusion.

Similar Messages

  • My WiFi name and password has changed. Did someone hack my WiFi? My computer can connect but not my iPhone 5s, and the connection for my computer is full, please help.

    Hello, this is my first post.
    Well lately I've been experiencing some connection issues with my iPhone 5s. I was on my iPhone just watching Youtube when my iPhone 5s disconnected, I tried to connect again by going to settings> Wi-FI> and then select my network as usual, but the weird thing is that my Wi-Fi network has changed it's name to Wireless, it used to be Wireless710. Also the password has been changed.
    My computer can easily connect due to the fact that it is hardwired to the Wireless Cable Modem Gateway.
    Extra Info:
    Carrier is Sprint.
    I am using Windows 7 Ultimate.
    My Wireless Cable Modem Gateway is Netgear.
    And now I am confused because when I open the small tab with the computer and a plug on the bottom right corner next to the speaker icon it says I'm not connected :/?! Here is a picture of it:
    Note that I can not connect to it but am connected on my computer. It just disappeared on my phone and computer, I even unplugged my router waited for 20 seconds and connected it back in. Did it wok? for my computer yes again because it is hardwired, but my phone? No. Wireless 710 still won't show up. Is this a possible hack? Please help me as much as you all can, thank you very much.

    Log in to the router's console with a web browser from your computer. What kind of encryption did you have on the router? If it was WEP that's about as secure as no encryption. It should be WPA or WPA2. There has been an exploit reported in Netgear and Linksys routers that allows someone connected to the router if Remote Access to the console is enabled to take it over and install spyware on it.
    Is it your router, or the cable providers? If it is yours it has been hacked. If it belongs to the cable provider they may have changed it to make it more secure. Call them.
    And if it has been hacked and is yours the best thing to do is to throw it away and get a new, more secure router. Or you can try reflashing the firmware by going to Netgear's site and downloading a clean copy.

  • I have a 2nd generation Ipod. I have it connected to my computer and see (my name) ipod on my screen. Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:   The Ipod, (my name) is synced with another ITunes li

    I have a 2nd generation Ipod.
    I have it connected to my computer and see (my name) ipod on my screen.
    Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
    The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
    An Ipod can be synced with only one ITunes library at a time.  Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
    Then it asks me if I want to delete and sync.
    I am not sure what to do for fear of erasing everything I have put on my Ipod.
    I would appreciate if someone could help me out. 

    If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
    Here is the iPod/iTunes manual from the Apple Support Site.
    http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
    Have A NICE DAY!

  • IPod Touch 4th Gen won't connect to my computer, charge or connect to iTunes.

    Okay, here is the issue. My computer runs Windows Vista. Ever since I have updated iTunes to 11.0.2, my iPod touch hasn't been able to connect to the computer at all. I don't know if there is any correlation between the update and my issue, but I need someone to be the judge of that. Apple has suggested that you uninstall iTunes, QuickTime, etc. restart the computer and then reinstall them. So I have done that multiple times, and my iPod still won't connect to the computer. My sister's iPod touch, 4th gen just like mine won't connect to iTunes or the computer either. I have spent a lot of time looking up possible solutions, but none of them work at all. I've done everything Apple suggests in troubleshooting and such, but nothing works. I was hoping someone else might be able to give me a solution. One that hopefully does not involve uninstalling and reinstalling Apples programs, which I have done several times.
    I have tried all accessable USB ports on my computer, and I have switched between the four different USB cords that we have, so this isn't the issue. My PS Vita will connect to the computer with no issue at all, so it isn't the USB ports either. I can plug my iPod Touch into my PS3 and it will charge the instant I plug either end of the cable in, the same for my sister's. I can plug it into the dock on my mother's alarm clock and it will charge just fine. I'm open to any suggestion, so please help me out here.
    -Jay

    So you tried everything here:
    iOS: Device not recognized in iTunes for Windows
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Try connecting to another computer to help determine if you have an iPod or computer problem.

  • My ipod 4 will not turn on, charge or connect to itunes/computer. nothing has happened to it to cause any damage to the hardware.

    i have  n ipod 4th geration. it has no hardware damage or water damage. it will not turn on, charge, or connect to itues/computer. my computer will not even pick up any hardware connection when i plug it in. the screen stays black. ive tried holding the power and home button then letting go of the power button but nothing seems to be working. someone please help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How many AppleTVs can connect to one computer?

    I have a client that would like to set up a large number of 2nd Generation AppleTVs to be synced to one Mac's iTunes and iPhoto libraries.
    What's the maximum number of ATVs that can connect to one computer? My client would like to connect 13, but is there a maximum number?

    Bear in mind that unlike AppleTV1 you cannot AFAIK specify different photo content to different AppleTVs - you'd therefore need to get the 13 'different' slideshows on each maybe using events, then manually choose the differing slideshow to run if doing all of this remotely.
    If someone could walk around and just hook a laptop up to each AppleTv to transfer photos over ethernet you'd have more flexibility, but this would be a chore if AppleTV lost photos for any reason.
    I don't use photos much with ATV2 and am unsure if they survive a reboot or power outage in memory.  Also unsure if there's a limit to the number of photos that can be transferred.
    AC

  • Connecting to my computer remotely?

    Hey there. I am trying to make it to where I can connect to my computer remotely using FTP file sharing. In Sharing preferences, I have FTP access turned on and have set my local hostname to The Chariot. When I select File Sharing, it tells me that other people can access my FTP server at ftp://thechariot/.
    The problem is, they cant. I have tried it from my friends mac at his house, and it says connection failed. the weird thing is that I can access it from my computer. when I try to connect to it from my own computer, it prompts me for my computer user name and password, I enter it, and there I am connected to my own FTP server. Why does it not do this from anyone else's computer?
    Does anyone know how to resolve this?

    You are currently protected from the internet through your router. Your router has an ip address which the world knows, sort of. Nobody outside your router knows what your ip address on The Chariot is at all. Further, your router prevents anything from getting through from the outside world.
    So, first, you have to learn how to open up your router to forward the ftp port (21) to your Mac's IP address. You then need to learn that the rest of the world will be able to access your computer. Further, you may find out that FTP passwords are passed in the clear, so it is possible, while not likely, that someone can sniff your password and gain access to your Mac. Now, if you are running as an Admin user, that person can do all sorts of things to your computer.
    While you are learning about this, you should look into sftp or ssh instead.

  • WRT54GS Router-trouble connecting to vista computer

    I have 2 laptops. One is xp and one is vista. I used the setup cd to install my new router on both of them. the first thing i noticed was that there were 2 very different setups for the vista and the xp computers. when i loaded it into the xp computer it came with a proram called "easylink advisor". All i did was folow the directions and it was perfect, the xp computer is wireless. when i go onto the easy link advisor it has an option and tells you how to connect another computer to your router wirelessly. I followed all the steps on that and it did not work. as soon as i unplug the blue cord from the vista computer the internet connection is lost. I noticed that the router is connected to that computer becasue when i go to "manage wireless networks" it is there, but  when i click on the symbol by the clock and click "connect to a network" there should be a lst of all the networks i am connected to and there is nothing there. so where is my netowork??? its there according to the "manage wireless networks" page!?!?!?!
    I hope that someone can help me with this problem. I have been at this all day!
    thanks

    Try turning your ON the wireless switch of the laptop & you will be able to see the wireless networks...click yours...click CONNECT...if secured it will ask you for hte wireless password & you will be able to go ONLINE WIRELESSLY!!!!!!!!!!!!!!!

  • Connect to your computer.Use Itunes to restore!

    Good Evening all,
    I have the 30gig black video Ipod and I am having issues! All that its doing and nothing more is saying "Connect to your computer. Use Itunes to restore" Then it says the same thing in 3 other languages below. Hey that sound pretty simple but when I try and plug it in to my computer it says Do Not Disconnect in small writing. It was actually bigger earlier today. So I tried to run Ipod updater 2006-06-28 it just sits on the screen saying initializing... with absolutly no function. I tried the 5 r's to no avail. It seems I cant do a thing with it. Please help, someone!
    30 gig Video   Windows XP  

    Soory guys i just keep messing around and it finally started to work. Thanks.

  • Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

    i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt  work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

    To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
    Just what is the problem you are tying to resolve?
    Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

  • Using ARD remotely connecting to work computer with Airport Extreme...

    So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
    I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
    Thanks for your time! Shawn

    Hi Shawn,
    So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
    That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
    If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
    Also these steps are so one person, can connect to one computer at your work.
    Open Airport Utility:
    go to the dock
    Click on the finder
    go to the menu bar
    Click on the "Go" menu
    Chose "Utilities" from the "Go" Menu
    double Click on "AirPort Utility"
    Access the Base Station:
    Double Click on your Airport Extreme BaseStation that is your internet connection router.
    a new window should pop up with your Airport Base Station as the Window Name
    Configure Static Address for the computer you want to connect to via ARD:
    Click on the internet Icon from the toolbar
    Click on the "DHCP" tab
    For "DHCP Reservations:"  Click on the "+" button
    For the "Description" put "ARD"
    For "Reserve Address by:"  set "DHCP Client ID"
    Click the "Continue" button
    For "DHCP Client ID:" set "ARD"
    write down the number in "IPv4" address field
    Click the "Done" Button
    Configure routing to ARD computer:
    Click on the "Advanced" icon from the tool bar.
    Click on the "Port Mapping" tab
    Click on the "+" button
    for "Service:" Chose "Apple Remote Desktop"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Apple Events"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Login - SSH"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "Update" button.
    wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
    Configure the ARD computer to use the correct IP address:
    Go to the computer you want to be able to remotely connect to
    On that computer, Go to the menu bar
    Chose the "Apple" menu bar
    Chose "System Preferences…"
    Click on the "Show All" button
    Click on the "Network" icon
    For the active network connection, (the connection on the left side with the green dot), click on it
    Clock on the "Advanced…" button
    Click on the "TCP/IP" tab
    for the "DHCP Cient ID: field put "ARD".
    Click the "OK" button
    Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
    Find out what your public internet IP address is.
    On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
    when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
    At this point you should be able to connect to the computer remotely
    connect to the internet from another location.
    open Apple Remote Desktop
    go to the file menu
    chose connect to computer using ip address
    set the address to the address to the IP address you wrote down for step 6. 2.
    use the same password as you used to connect to the computer at work using ARD.
    So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
    Also some network connections change.  When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
    Of corse there are ways around this. But that's kind of another conversation.
    Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
    ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
    This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

  • IPod won't connect to my computer correctly

    When I plug my iPod Classic 80GB into the computer the screen of my iPod freezes.
    It is recognised as new hardware when plugged into the computer but does not appear in iTunes.
    When I first purchased my iPod it connected to my computer fine, but now that it has music on it it is failing to connect properly.
    My computer only has USB 1.1 ports, could this be the reason?
    If this is the case, is there any way to work around it without having to update to USB 2.0?
    Thanks

    I've had a similar experience. I just purchased the IPOD Classic (80gb) a few days ago. It originally synced up nicely. Out of nowhere, the IPOD froze, as did my O/S (Vista). I executed a System Restore on the O/S, and also reinstalled iTunes again (v7.5)
    Since I was unable to do anything with my device, I let the battery run out. Hoping that I would be able to reconnect the device to my PC and recharged the battery, and thus unfreeze the device, it was not to be.
    At this point, I have the device connected to the PC 9charging), but it continues to turn on and then off. I see an Appe insignia for a few seconds, then nothing. If the PC is not recognizing the device, how do you go about trying to reset the device?
    I'm ready to get a replacement, but am hoping someone can assist.
    Thanks,
    dgioia

  • My won't connect to any computer

    My won't connect to any computer, it's up to date with IOS 6.1.3 and i've used mulitple ipod charging cables but nothing works, it only charged when it's completely flat too, then it turns on and stops charging, goes flat and charges again, I also reset it and it didn't help, and now i've lost all my photos because i can't connect to a computer to restore my back up, someone please help, also the only way it full charges is if i leave it in sleep mode, it doesn't say it's charging but later on it will have full bettery

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    also
    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPod loses "Last Played" after being connected to another computer

    I've done a lot of searching on this, but it's a hard thing to search for since it's difficult to explain. Hopefully someone has heard of this before. If it's already been posted somewhere, I apologize.
    Basically, I sync my iPod classic 80gb with my work computer. I use a lot of smart playlists to manage what I listen to. "Last Played" is an integral part of my smart playlist system.
    If I connect my iPod to any computer other than my work computer, the iPod will forget any of the songs I listened to since the last time I synced. I would like to be able to use the iPod as a portable hard drive, but when I do I lose this information. I just tested this to be sure, but when this happens, I don't lose any ratings that I've given to songs since my last sync. So far I've only noticed "Last Played" being dropped.
    Any information would be a huge help. Thanks!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Can OS updates be done on 3G without connecting to a computer?

    A family member living in a rural area has an iPad 3G but does not have a computer with Internet connection. Can the OS update be done without connecting to a computer with Internet connection?

    An Internet connection from a computer is required to download the update. But the update could be downloaded on a computer that does have a connection and then copied to your family member's computer, if someone would be visiting him or her. Anyone with a computer with an Internet connection can download the update manually from Apple's servers.
    http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,14.2.1_8C148Restore.ipsw
    Once copied to the family member's computer, it can be installed by Option-clicking the Update button in iTunes and choosing the downloaded file.
    Regards.
    Regards.

Maybe you are looking for