Connecting to Starter kit 1.0

Hello,
I have been working on my starter-kit 1.0 robot for about a month now. Recently i decided that i would go moble with it and control it through my new laptop instead of my desktop. When i try to run the robotics hardware setup, I can see the robot but cannot connect to it. when I try i get the error code "-2147220288". I cannot find anything about this code online. When i contacted NI support, their fixes did not work. The wierd thing is, is that my laptop can assign it an IP but fails when it tries to download the software. Has anybody else had this problem and more importantly know how to fix it?

How are you connecting using a wireless card on your desktop? Make sure your laptop is on the same subnet as your desktop and RIO. You can do this by statically setting the IP address of your PC to have the same first 3 numbers (ex. 10.1.2.28, 10.1.2.29, 10.1.2.30)
If you cannot see the RIO with both computers connected, try disabling firewalls and antivirus on the laptop.
Zach P.
Product Support Engineer | LabVIEW R&D | National Instruments

Similar Messages

Can't connect Robotics Starter Kits 1.0

I already went through the NI Robotics Hardware Setup and followed it step by step, but still I cant connect the robotics starter kit to my PC. It said ''No Targets Detected''. I already tried all the possible solution on the troubleshoot page, but all of them didnt work. Any help on this? Thanks

Hi cycloneticz,
Which LEDs light up after you turn on the power to your robot?
Are you connecting the robot directly by Ethernet to your PC or are you plugging it into a network?
Regards,
Adam Brown
Applications Engineer
National Instruments UK

Error while installing IFRS Starter Kit in BO FC

Hi Experts,
We are trying to install Starter Kit for IFRS SP1 in BO FC version 7.5. We are following the steps in the installation guide.
However while running the SCAN task, we encounter an error : "Processing task SCAN - (error) ". The log shows that
the packets are extracted, but it is not able to generate the receive tasks. What is the possible cause of this error?
The product information of FC shows that "Build : 7.5.0.1021". How to find the service pack that is installed?
Thanks in advance.
Regards,
Shoba

Ok,
The problem is the following : You can only install IFRS packages in a non signed database. Yours is signed as 0000.TOP so it will not work. Even if the goal is to have IFRS packages installed + 0000.TOP signature.
You should do the following :
1. Create a new empty database.
2. Create a new Finance Datasource in CtAdmin.msc which point to the new DB
3. Initialize it as a CHILD DB (All task / Migrate).
4. Connect to the application with ADMIN account and verify that the DB signature is empty (if it's not the case, you will have to switch SQL initialization querries back to child behaviour and restart from step 1).
5. Copy IFRS packages and configure the transfer vector (folder destination).
6. Create and execute the SCAN task
7. Execute each reception task
8. Change DB Signature from 0000.ROLL-OUT to 0000.TOP (SQL querries are documented in the IFRS installation guide).
Good luck

Unhandled Error in Starter Kit 2.0

Hello,
I am trying to develop some applications with the NI sbRIO-9632 that came with the Starter Kit 2.0, however whenever I try to run the Robotics Hardware Setup I get an "Unhandled Error".
The device appears in the "Targets Detected" list with the correct serial number and with an IP address.
I tried to "ping" the device to see if it responded and the results are shown in the screenshot:
First time the device was connected directly to computer
Second time the device was connected in the same network as the computer I was using
Third time I "pinged" the computer next to me
Last time again the device was connected directly to computer
I included some screenshot that show how I got the problem.
Can anyone help?
Thank You
Davide
Attachments:
ErrorDetected.PNG ‏81 KB
IPAddress.PNG ‏35 KB
Ping.PNG ‏63 KB

DLabview wrote:
Nope, the computer I was using was connected to a wired LAN network.
However the PC has 2 ethernet ports, one is the default one whereas the other one is on a different networking card.
The network is quite a busy and extended, the department I'm working in is quite big and contains many hundreds of PCs and devices connected via wired LAN or via Wi-Fi access points.
The device didn't really crash though, it basically fails to connect to a PC in order to receive a program.
Other people are experiencing my same issue with the same sbRIO, and we don't really know what is going on.
Davide
Just to make sure, try to connect an ethernet cable directly between the sbRIO and your computer (perhaps connect it to that extra port).
Also, is the sbRIO connected to a hub or a switch? If it is a hub and it starts to transmit broken packets from some junky WLAN card/router, it might cause problems?
First I got some bad latency, basically the connection went intermittent on/off, on my sbRIO, then a few minutes it went belly up and crashed (froze).
Br,
/Roger

UC on C210 Westmere starter kit

Hi guys,
I have a customer who already posses a couple of Cisco UCS C210 M2 servers based on preconfigured starter kits ( 2 x X5650, 48Gb RAM, 2 x 146 HDD) and IBM SAN storage. We were planning to deploy Unified Communications following the UC on UCS blueprint. I was going through the guidelines found on this link:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/solution_overview_c22-597556.html
What I find problematic here is this paragraph which states that only quad-core cpus are supported at this time:
"Processor: The CPU quantity must match the quantities listed in Tables 1 and 7. The CPU type must either match the types listed in Tables 1 and 7 or be a more powerful option (that is, Intel Xeon or later architecture with better performance as measured by benchmarks such as PassMarks). Only quad-core CPUs are supported at this time. CPU options that are less powerful than the configurations in Tables 1 and 7 are not supported"
This conflicts with the existing X5650 processor which is 6 core.
Does anybody know if this is already overcome? Any experience with such scenario?
Thanks in advance,
Elton

BE 6000 consists of the following foundational elements:
Cisco Unified Communications Manager
Cisco Unity® Connection
Cisco Unified Provisioning Manager
Cisco UC Virtualization Hypervisor
Cisco Unified Computing System C220 M3 Rack-mount server.
Following applications can be optionally added to Cisco Business Edition 6000 solution.
Cisco Unified Presence
Cisco Unified Contact Center Express
Cisco Unified Attendant Consoles
Cisco Business Edition 6000 supports a maximum of five applications (from the list of 6 applications above) running co-resident on single UCS C200 hardware platform and supports full featured redundancy for all the core applications over a WAN or LAN environment.
http://docwiki.cisco.com/wiki/Cisco_Unified_Communications_Manager_Business_Edition_6000
CUC and UCCX can provide an IVR, it just depends on what requirements and complexity of an IVR you need.
The more complex option is in UCCX. Basic IVR in CUC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Starter kit 2.0

Hi,
I am having some trouble with the daNI starter kit 2.0 robot. It is not detected by MAX or anything else, does anyone else ecountered this problem?
Thanks
Stefan
Solved!
Go to Solution.

Hi Stefanb1
Usually, if a RIO device such as a compactRIO or sbRIO isn't appearing in MAX, there may be a few different reasons. Firstly, have you installed the NI-RIO drivers on to your PC? It's important that you've installed your software in the correct order, with the development suite first, then the extra modules and toolkits (such as the robotics toolkit) and finally, drivers (NI-RIO).
If you have installed your software in the correct order, please ensure the quality of your ethernet cable and connection.
Kind Regards,
Shalimar Ali
Applications Engineering Intern

Re: Teleoperate the Starter Kit from 20 floors away

I have been trying to open the VIs attached to the blog Teleoperate the Starter Kit from 20 floors away most of which open successfully. However when trying to load 'Starter Kit Remote Reciever.vi' I get messages saying that I am missing two VIs and a FPGA bitfile. These being;
"TCP Send Recieve.vi"
"Get Sensor Motor Offset.vi"
"Starter Kit Roamin~F0_FPGA Target_Starter Kit FPGA V~B4.lvbitx"
I have located the TCP VI as per the instructions in the comments on the blog, however cannot find the other two. Where would they be located?
For reference, I am running LabVIEW 2011 (32-bit), and connecting to a Starter Kit 2.0 (DaNI).
Regards
Peter

Dear Clad,
Thank you for the reply.
It's good to know that the serial part is okay except for the missing part. I've editted the code, in which i've replaced the "byte count" with "byte to read" function.
Before this, i assumed that, putting a constant number of "byte count" would be helpful in term of specifying the number of bytes that will be read by the VISA serial. Thank you for your suggestion on this.
I've installed NI FPGA in my computer.
About this:
"Have you linked the I/O that will read out the 'sensor motor offset (rad)', 'stop motors (F)', 'left ccw velocity setpoint (rad/s)', 'right ccw velocity setpoint (rad/s)', 'sensor motor offset (rad)'?"
I'm so sorry, but could you explain more about this?
I assume, the code (Reciever1001) will work alongside these two codes (Bot Command and Control1001) .
Looking forward for your reply
Thanks
Regards,
cawan
Attachments:
BotCommands.ctl ‏5 KB
Control1001.vi ‏50 KB
Receiver1001.vi ‏47 KB

Jump Start Kit application server failed to start

Hi,
My Jump Start Kit Application server is failing to start. The Error is as below
2012-10-22 11:58:18,076 FATAL [com.fatwire.logging.cs.db] - <Exception loading meta data for data sourcecsDataSource>
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (User not found: SA)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1549)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
at com.fatwire.cs.core.db.DataSourceBackedPool.acquire(DataSourceBackedPool.java:47)
at COM.FutureTense.Servlet.JDBCConn.getMeta_trans(JDBCConn.java:188)
at COM.FutureTense.Servlet.JDBCConn.getMeta(JDBCConn.java:130)
at COM.FutureTense.Servlet.JDBCTable.<init>(JDBCTable.java:285)
at COM.FutureTense.Servlet.JDBCConn.GetTable(JDBCConn.java:1333)
at COM.FutureTense.Common.ftDBTable.getconn(ftDBTable.java:3899)
at COM.FutureTense.Common.ftDBTable.grab(ftDBTable.java:982)
at COM.FutureTense.Common.ftAppLogic.getEvent(ftAppLogic.java:2010)
at COM.FutureTense.Common.ftAppLogic.initEventEngine(ftAppLogic.java:3453)
at COM.FutureTense.Common.ftAppLogic.init(ftAppLogic.java:1939)
at COM.FutureTense.Common.ftAppLogic.init(ftAppLogic.java:1897)
at COM.FutureTense.Common.CatalogManager.execute(CatalogManager.java:321)
at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
at COM.FutureTense.Servlet.FTServlet.doGet(FTServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.cs.core.logging.context.filter.ContextHeaderFilter.doFilterWork(ContextHeaderFilter.java:37)
at com.fatwire.cs.core.logging.context.filter.RunOncePerRequestFilter.doFilter(RunOncePerRequestFilter.java:54)
at com.fatwire.cs.core.logging.context.filter.HttpFilter.doFilter(HttpFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.sql.SQLException: User not found: SA
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcConnection.<init>(Unknown Source)
at org.hsqldb.jdbcDriver.getConnection(Unknown Source)
at org.hsqldb.jdbcDriver.connect(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.tomcat.dbcp.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
... 39 more
2012-10-22 11:58:18,076 ERROR [com.fatwire.logging.cs.db] - <Exception getting database connection>
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (User not found: SA)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1549)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
at com.fatwire.cs.core.db.DataSourceBackedPool.acquire(DataSourceBackedPool.java:47)
at COM.FutureTense.Servlet.JDBCTable.get_trans(JDBCTable.java:698)
at COM.FutureTense.Servlet.JDBCTable.get(JDBCTable.java:611)
at COM.FutureTense.Servlet.JDBCTable.<init>(JDBCTable.java:288)
at COM.FutureTense.Servlet.JDBCConn.GetTable(JDBCConn.java:1333)
at COM.FutureTense.Common.ftDBTable.getconn(ftDBTable.java:3899)
at COM.FutureTense.Common.ftDBTable.grab(ftDBTable.java:982)
at COM.FutureTense.Common.ftAppLogic.getEvent(ftAppLogic.java:2010)
at COM.FutureTense.Common.ftAppLogic.initEventEngine(ftAppLogic.java:3453)
at COM.FutureTense.Common.ftAppLogic.init(ftAppLogic.java:1939)
at COM.FutureTense.Common.ftAppLogic.init(ftAppLogic.java:1897)
at COM.FutureTense.Common.CatalogManager.execute(CatalogManager.java:321)
at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
at COM.FutureTense.Servlet.FTServlet.doGet(FTServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.cs.core.logging.context.filter.ContextHeaderFilter.doFilterWork(ContextHeaderFilter.java:37)
at com.fatwire.cs.core.logging.context.filter.RunOncePerRequestFilter.doFilter(RunOncePerRequestFilter.java:54)
at com.fatwire.cs.core.logging.context.filter.HttpFilter.doFilter(HttpFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.sql.SQLException: User not found: SA
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcConnection.<init>(Unknown Source)
at org.hsqldb.jdbcDriver.getConnection(Unknown Source)
at org.hsqldb.jdbcDriver.connect(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.tomcat.dbcp.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
... 39 more
2012-10-22 11:58:18,076 ERROR [com.fatwire.logging.cs] - <Exception processing CatalogManager request>
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (User not found: SA)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1549)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1388)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044)
at com.fatwire.cs.core.db.DataSourceBackedPool.acquire(DataSourceBackedPool.java:47)
at COM.FutureTense.Servlet.JDBCConn.Ping_trans(JDBCConn.java:291)
at COM.FutureTense.Servlet.JDBCConn.Ping(JDBCConn.java:274)
at COM.FutureTense.Common.CatalogManager.execute(CatalogManager.java:1122)
at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
at COM.FutureTense.Servlet.FTServlet.doGet(FTServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.cs.core.logging.context.filter.ContextHeaderFilter.doFilterWork(ContextHeaderFilter.java:37)
at com.fatwire.cs.core.logging.context.filter.RunOncePerRequestFilter.doFilter(RunOncePerRequestFilter.java:54)
at com.fatwire.cs.core.logging.context.filter.HttpFilter.doFilter(HttpFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:557)
at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.sql.SQLException: User not found: SA
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.jdbcConnection.<init>(Unknown Source)
at org.hsqldb.jdbcDriver.getConnection(Unknown Source)
at org.hsqldb.jdbcDriver.connect(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.tomcat.dbcp.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:582)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1556)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createPoolableConnectionFactory(BasicDataSource.java:1545)
... 31 more
Can you please tell me why this error is coming and how to resolve it.

The error got resolved..
The files in
App_Server\apache-tomcat-6.0.32\default\data\hypersonic
were corrupted hence the error.
Replaced them with the ones from a correct installation and voila!

Robotics starter kit 2.0

Hello
i have problems when i make robotics projects:
- I can't save my data if i download and run it on the Robotics Staters Kit 2.0, but it is nomal when i run it on LabVIEW's framework
- I created a Fuzzy VI and then integrated with programs controlling DC motor. Fuzzy logic VI runs well in LabVIEW's framework but can't run on the Robotics Staters Kit 2.0
Please help me
thank you so much
Attachments:
testWrite data.vi ‏45 KB
Fuzzy controller 1-2.vi ‏23 KB

hi
- i tried to connect but it couldn't photo 1st. do you have solutions to save data when VI runs on Robotics Starter Kit 2.0 target?
- When VI run on Labview framework, everything is ok for fuzzy controller: photo 2nd, but when run this VI on Starter Kit target, output from controller is "zero"
please take a look and help me
Best regards: Duc Phuc

No auto-connect on start-up or restart (iMac)

Just an update on my problem. I too had problems with auto-connect to my network router after sleep, due to download of update 10.7.3. Worked with Apple Tech Support and local Apple Store to resolve problem - Tech Support representative and FAQ contributors alerted me to the availability of latest WIFI Update, which I downloaded and installed. Update DID resolve auto-connect problem for my system's "awake-from-sleep" mode, BUT it then began a SPORADIC no-connect problem upon startup and restart. I've reported this problem to the Tech Support representative, and she said she would alert the appropriate system teams of this problem.
I'm no software expert, but I believe the problem may be tied, in some way, to that part of the OS that triggers not only network card drivers, but also Bluetooth connectivity, clock activation, and any other sub-system icon displayed in the upper-right corner of the desktop. While I can manually connect to the network, and have the connection work without dropping, it will NOT connect automatically - sometimes - upon startup and restart. It WILL work automatically upon awaking from sleep. It tries to find the network signal during startup/restart, but doesn't always connect.
I'm thinking that if it was the drivers, themselves, for the network card that were, in some way, corrupt or incorrect, the system wouldn't connect at all ... (???)
Anyway, it's working a little better - but it's still not fully-operable; and I'm still looking for a permanent fix from Apple. I have a feeling that one of the reasons why Apple is bringing-out Mountain Lion so soon after Lion's advent is to possibly resolve some of the problems and "quirks" folks are having with Lion. I know I've experienced other little problems since upgrading to Lion that I'm simply living with, knowing that sooner or later, a fix will be forthcoming - either by patch, update, or a new OS ...
- Chris

Some additional input - Just received a call from "John", Apple Tech Support, asking me to do two things in an attempt to resolve my connectivity issues.
(1) Upon start-up, wait a minute or two to see if the network finally locks-in automatically, vice manually selecting the network connection. There may be some "priorities" being addressed via the OS wrt/ Bluetooth connections for the keyboard and mouse, that may prevent a faster lock-on by the network components. He says this sometimes manifests itself upon start-up and occasionally on restarts for some systems. It may be that, for some system configurations, Bluetooth components experience some minor interference from telephone systems or routers placed adjacent to these component locations - and since these components have "priority", system-wise, it may further delay network connectivity as well.
(2) Drag-out an old USB keyboard (and mouse), disable your Bluetooth access, and use them in place of the wireless keyboard and mouse to see if it results in a more-positive result for network connectivity upon start-up and restart.
Naturally, I'll give it a try, and see how it works. Told John I'd let him and Josie (another Apple Tech Support representative) know how it's working in a couple of weeks.
Really appreciated his call - very nice of him to follow-up. I'll let you-all know how it works ...

Help! On ios app store, in featured I accendently tapped app starter kit and I can't get out!

Help! On ios app store, in featured I accendently tapped app starter kit and I can't get out! I closed the app out of mutlitasking, hit the featured button multiple times, but nothing happened! There's not even a back button! I can still see top 25, search, updates, but not see featured, genus, new,etc
HELP!!!!!

what mac os x are you useing.

Problem stopping the Labview Starter Kit motors (huge offset?)

Hi
I implemented an algorythm for the Labview Starter Kit. It reads a map and navigates from the initial point to the goal. The Starter Kit only performs two movements: "go straight X mm", and "turn 90º left/right (the turning is made when stopped, like a rotation).
The problem Im encountering is the turning. It uses a digital compass (CMPS09): when the robot needs to turn left/right, I feed the CCW Velocity of the motors (using the read/write FPGA functon) with +3.4 rad/seg and -3.4 rad/seg, into a timed loop.
The condition to stop is simple: "if heading=desired heading for the actual turn --> finish loop and stop motors".
Well, it happens that in the time window from calling the "stop motor" function, and the robot motors and wheels actually STOPPING, the robot travels 9-10 extra degrees!
So, for example, I want the robot to turn from north (0º) to 90º. The CCW velocities are feed with +3.4rad/seg and +3.4rad/seg into a timed loop, and I checked that the timed loop finishes when the heading is 90º. But the final orientation of the robot is exactly 100º, because the motor seems to take a little time to stop.
The deviation depends on the velocity of the motors, I was able to reduce it to 3/4 degrees using a turning velocity of 1rad/seg, but it has no use since it´s extremely slow and the motors works very badly (they dont even are able to maintain a constant speed in slower velocities).
I tried to check the Starter Kit FPGA.VI but I fail to understand how the "stop motor" function works.
I dont know if there is any way to correct or reduce the "stopping time" of the motors. If I correct the turning function to subtract 10º for every turnop before starting the movement, the algorythm works as long as I use the 3.4rad/seg velocity... but that solution is extremely shabby, and I dont think I cant say that on my Final Project! There has to be a way to improve it, isn´t it?
EDIT: For the record, I tried several variations for the loop, and several timing, form us to ms, and I think that´s not the problem, because I wasnt able to get better resulsts at all.

I did have similar problems and I figured all that I installed too many real-time components. It might not be the case with yours but you might try.

3D Starter Kits

I purchased the Samsung 55" LED 3d tv bundle back at the end of January. New house, new TV, right? The kit (2 pairs of glasses, Shrek movie, etc.) was back ordered. No big deal... I had plenty of other things keeping me busy. Well, the dust has settled, most of the boxes have been unpacked, and I've been playing with the TV. I called BB, and they still don't have the kits. And they really don't know when they will come in. I called Samsung to see if I could get the squeaky wheel greased, and they said that wasn't their deal, it was strictly a BB deal. I should call them.
Does anyone have some insight??
Thanks in advance!!

I know this will not help you much but it does seem to be a growing industry epidemic at best. there just isnt much support for the 3D TV stuff. This is my open letter to my television company mitsubishi.
Thought I would repost a letter to MDA and pre warn others from buying into this brand of 3D TV. Who knows it might save you time money and effort.
to MDA in reguard to:
"Thank you for contacting Mitsubishi Digital Electronics America, Inc. We are pleased to be able to assist our customers via our website. Here is the information that you have requested:
To purchase additional glasses that are compatible with Mitsubishi TV’s are Samsung Model # SSG-2100MG/ZA or part #789P012A10
Regards
MDA"
3- 8-10
Dear MDA I truly can not put into words the over whelming remorse I have had in purchasing your brand of TV. It is not the TVs fault for the remorse, on the contrary the TV works fine and performs as it should and intended.
It is the remorse for purchasing the TV in the anticipation that it would come with full support in the growing 3D industry. More specifically, the Accessories, the emitter, the glasses, the customer service, it's quite frankly none existing.
I'll outline a bit in detail the tremendous efforts on my families part in whole, to obtain even the minute of information on where or even how to purchase the said above mentioned items.
First outing: HHgregg
Item: Emitter
After searching the tri county area for the emitter or the starter pack we encounter a number of problems. It would seem that none of the retail stores carry your manufactured starter kit or glasses except HHgregg. We called to make sure they have at least one in stock, which they did. Once we arrive we find out they in fact did not have the kit they sold it ten minutes prior to our arrival. After haggling with the manager they do find a kit located twenty miles away. With no apologies from the store manager we left for the twenty mile hike; only to find out the kit had been previously opened an returned. So desperate were we, we bought that set as is with no discount!
The kit to this day work great and fine.
Second outing: Brandsmart USA
Item: Glasses
After the semi major purchase of the emitter and the enormous headache over the hassle we decided to wait a few months before venturing out for a extra pair (or two) of glasses. In our house hold we have six people. Me, my wife and four kids. Naturally we need four more glasses. This time staying away from HHgregg and vying to never again deal with this type if business. We decided to check out Brandsmart USA as they were running a special on samsung glasses. Ironically it seems Mitsubishi does not make their own glasses as listed in the manual. They list Samsung. The only current brand Samsung offer now is the SSG-3100ab. Armed with what little bit of information Mitsubishi has provided us with, we were under the impress this model would work. We ended up paying a hefty fee of $778.00 for four glasses. All of which are non compatible with YOUR television's 3D emitter.
Only after contacting your company that it was later revealed the only brand or model that is compatible is the Samsung Model # SSG-2100MG/ZA or part #789P012A10. Needless to say We've returned incompatible glasses this morning.
Third outing: http://www.mitsubishi-tv.com/OnlineRetailers.html
Item: Compatible Glasses
Two god awful outings into the ever quest of finding items to work with your television and equipment accessories. This time we thought we'd stay at home and find the glasses. After much sleuthing around on the Internet and going through every one of your authorized dealers there is little luck we will find a compatible set of glasses. Either one of two things happens on your dealers web page. One, OUT OF STOCK! or Two, absorbingly high priced that's not worth the effort we've had to put forth into the purchase.
My wife personally contacted Samsung to find out what glasses they produce are compatible with your TV. To her astonishment and mine, As far as they recall "there isn't any Samsung glasses that are compatible with any Mitsubishi 3D TV". I'm not sure why they would say such a thing nor could I understand why your manufacture spec would list them as your compatible provider?
Allow me for a minute to introduce my self. My name is ****** ***** I'm an independent contractor for Heating Venting Air conditioners, also known in the field as HVAC. During my course of time I have personally sold and installed a great many of units ranging from Trane, American Standard, Reem and of course Mitsubishi. On average I spend at least five to ten hours a day at my customers homes. During the time it takes me to sale a system and to install it, I generally have about a two to three over conversation with the home owners. All of which isn't Solly dedicated to my sales. The conversations usually range from refrigerators to washers to dryers and as you might guess television sets too.
I can honestly say, when it comes to the 3D TV market your television isn't looked upon in much favor. I Truly wished I could tell my home owners the TV I bought for my 3D needs is enough to satisfy my families needs. Instead the conversions generally run into some thing of a First, Second, Third outing experience!
sincerely,

"Invalid column name" when restoring SAP DM IFRS Starter Kit

I want to share an issue that we came across when restoring the SAP Disclosure Management IFRS Starter Kit. Namely when trying to restore it on an environment we got the following error:
Server Error in '/' Application.
Invalid column name 'AccountExpirationDate'.
Invalid column name 'PasswordChangedDate'.
Invalid column name 'LastSuccessfulLoginDate'.
In our case, after getting this error we tried restoring the SK on SAP Disclosure Management SP06 and it turned out to work ok so hope that this solves it for anyone else stuck at the same

Hi Rajneesh,
Check whether you have both the row-axis and column-axis of the input template through 'edit report'.
Probably your input template has some member dimensions missing in your template.
We have faced the same problem before and corrected it.
This error occurs sometimes when we create a input template by clearing defining the row & column axis in the template but afterwards try some EPMOlapmember in any axis by deleting the original report elements.
So check the input template once again. I think you will track the error.
Regards,
Bishwajit

Oracle 8i for Linux Starter Kit

Hello,
Need an Oracle God to help me with 8i for linux!
I am would like to learn about oracle database software. Just purchased the Starter Kit that includes 8.1.6 Enterprise Edition. Now I have done some research on the install for this and found out that it is very difficult. I tried to cookbook together the install from various posts/oracle web site/etc. I was successful in getting it to install, but could not get the stubs patch to install.
I now have a fresh install of Mandrake 8.0. No changes have been made to glibc.
First question is where to get the correct glibc rpm to keep the installer from crashing, and from causing other problems to my system. MandrakeUpdate was smoking crack and fetching a different file for glibc 2.2.2-5, then it said that it would conflict with gcc or something like that. I want to make sure I am getting the appropriate
files.
Second, on page 19 of the book, I do ok until it comes to setting the environment variables. Am I supposed to login as my Oracle user, an type '$HOME/.bash_profile' to set these variables? This relates to the problem with the stubs patch saying that ORACLE_HOME was not in the environment.
Third, I am using this link to get to the stubs file.
http://download.oracle.com/otn/linux/oracle8i/glibc-2.1.3-stubs.tar.gz
My plan is this.
1. Update the appropriate glibc rpm to allow the installer to run.
2. Install Oracle based on the books instruction verbatim.
3. Do not install the educational database. First install the stubs as above.
Questions.
Will a custom install allow me to keep the installer from attempting the database?
Once the stubs are installed, where is dbassist located to install the database after the fact?
Please Please help me with this situation. I would really like to learn databases, Oracle in particular. If this does not work, I doubt that I can return the book, considering the cd is open.
Thanks in advance for any kind assistance.
Jerold Von Hemel
jerold at vonhemel dot com
null

Here is a mini update since my last post...
ok, by updating my glibc stuffs from 2.2.2-4 to 2.2.2-5 I am able to get the runinstaller to work (it echos a bunch of 'map failed' in the console though I wonder if there is something wrong with that)... however since I am only doing now at work I can only try to install on my laptop which is does not have enough HD space. I am down to 230M left and there is no way it will install so I will try it again on my PC after I go home today. Btw, here are the files that I have updated:
glibc-2.2.2-5mdk.i586.rpm
glibc-devel-2.2.2-5mdk.i586.rpm
glibc-profile-2.2.2-5mdk.i586.rpm
ldconfig-2.2.2-5mdk.i586.rpm
nscd-2.2.2-5mdk.i586.rpm
You can get these from any mirror sites I think. Or run your MandrakeUpdate under the Config/Packaging menu (you need to select a mirror site by clicking mirror site update).
As for the SRPMS/glibc-2.2.2-5mdk.src.rpm...
I can't find this file in any of the mirror site.
However, now I am facing another issue. I tried the "echo $ORACLE_HOME" as suggested but it returns me with an empty line same as I try a make up env like "echo $dafadas"... so does this means that it is not reading the ORACLE_HOME in my .bash_profile in the oracle account? I also notice that even I did all the same procedures, while in RH6.2 the oracle install path is my $ORACLE_HOME, in Mandrake8 the path is /home/oracle/OraHome1? I stopped at this step and didn't go forward because 1, there is not enough HD space to continue and 2, I am not sure that the path is correct. If anyone reached this state and went beyond please let me know if I am on the right track or not...
P.S. I remember doing that same thing about not installing the database during the installation for oracle 8.0.5; however, I couldn't access to the database even using my oracle account later on. I don't know if that is a permission problem or something like that.
Thanks in advance
Mimic

Connecting to Starter kit 1.0

Similar Messages

Maybe you are looking for