Connecting to Surround Sound (Qosmio G20)

I am trying to connect my Qosmio G20 to my external surround sound sysytem via an amp.
As far as I know I have connected everything correctly, but I am only getting sound from my left speakers front and rear, no where else.
I have checked the speakers and all the settings I can think of on the laptop, is there something I am not doing in order to send the signal to all the speakers??
Any help is greatly appreciated.
Many Thanks

Hello
Check please this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 . I believe that Quad`s posting will be useful for you.
Good luck!

Similar Messages

Xfinity X1 - TV Sound Cuts In And Out When Connected to Surround Sound Receiver

I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber. I am experiencing issues with TV sound cutting in and out. The sound cuts out for 2-3 seconds, all the time. The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver. HDMI cable run from Onkyo receiver to TV. I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV.

I highly doubt your modem has anything to do with this because it doesn't have MoCA.However it sounds like you an original green power light Pace DVRs and they are well known to have audio dropout issues. I would replace that DVR with a different version.
Is this problem happening on a specific channel? CBS seems to be having issues lately. I am watching the CMA awards right now and I have heard the volume change a couple times but this is the only channel it is happening on which would suggest it is not Comcast's fault.
spv510erp wrote:
I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber. I am experiencing issues with TV sound cutting in and out. The sound cuts out for 2-3 seconds, all the time. The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver. HDMI cable run from Onkyo receiver to TV. I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV.

Pioneer AV Receiver connection for surround sound

How would I be able to setup for a 5.1 sound output from the iMac to a pioneer AV receiver? I am only getting a 2.1 output always. I used to play the same video with a 5.1 output from a PC. However, am not able to do the same with my new iMac (late 2010 model). I connected my iMac from the miniDisplay port to the receiver using a HDMI adapter.

Well as of now since the macbooks dont have HDMI, the way to get the best quality audio is over optical.
Head over to www.monoprice.com and search there for the best deals on high quality cables.
What you want is a mini-toslink to regular toslink cable.
here is a link for a 12ft one for $3 plus shipping.
http://www.monoprice.com/products/product.asp?cid=102&cp_id=10229&cs_id=1022902&pid=1558&seq=1&format=1#largeimage

Sound no longer playing through Surround Sound via TV

I have had my Mac Mini for about a year now and recently purchased a new 3D LG TV. Prior to that I had another LG hooked up through it and have a Panasonic surround sound system set up with I believe it's a Gefen digital to analog converter, because unfortunately LG only makes digital and alls that is available is analog through my surround sound. I have always been able to listen to my computer through the surround sound, however, since I purchased this new TV I have not been able to. The sound plays through the TV speaker but will not play through the surround sound yet when I change inputs over to my PS3 or DirecTv I can hear everything else except my computer. This is why I am convinced it is the computer and not the TV. I don't know if I'm missing a setting or something needed to change for this type of TV or what. I am pretty technical when it comes to electronics so I have tried changing all different types of settings and played around trying to fix this but so far no luck so who has an idea or ever heard of this before?

@mndwgz and Lousyfool
Sorry for the delay, however, I was out of town and just getting back to this issue. I'm not 100% positive but I'm pretty sure that it has something to do with the computer settings or something of the sort because like I said prior to me switching tv's it has worked no problem, both of which were connected the same exact way. Both LG tv's only have an optical digital output port on it while my Panasonic surround sound only has an A/V input. To solve this I have a Gefen Digital to Analog converter in between the connection from the TV and the Surround Sound, so my computer is not connected anything in between the computer and HDMI connection to TV. Sound comes out of the TV through the computer but will not bypass through the TV to the Surround Sound. However I know it's not the TV settings because my PS3 regardless of the HDMI input plays sound through and over all my speakers. I have not tried rerunning my computer through the old LG LCD tv connect the surround sound as well to see if it worked because all the way up until I switched to an LED tv, it had. It's weird how this is a problem but have tried switching settings, changing inputs, problemsolving etc. but just don't see how my PS3 is converted through the tv to the converter to the surround sound and my mac mini is not!
Old LCD TV- LG model 42LH30
New LED TV- LG model 47LM6200
Surround Sound- Panasonic model SA-PT950
Converter- Gefen Digital to Analog Converter

IPhone 5 audio issues when paired with surround sound via Bluetooth.

iPhone 5 has developed audio issues since ios7 updates when its connected to surround sound system via Bluetooth. Audio jumps and skips in erratic and unpredictable manner on music app and worse on third party apps such as YouTube . Have restored phone from factory settings etc. Have also checked surround sound for fault with Bluetooth; iPhone 4 ios7 works fine, android works fine but newest iPod touch with ios7 appears to have developed same issue as iPhone 5 since ios7 updates. Advise people to check for this issue on their Bluetooth devices and any advice would be appreciated on this issue :)

Hey there Vxas,
It sounds like you are gettings some very unexpected behaviour from the iPhone to your bluetooth surround sound system. I would try the troubleshooting recommended in this article:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
Restart your iOS device.
Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and Forget this Device. Try to pair your Bluetooth accessory again.
Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
Restart your Bluetooth accessory by turning it off and then on again1.
Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
Thank you for using Apple Support Communities.
Take care,
Sterling

Qosmio G20: watching movies - no sound from TV

Hi
I want to watch movies playing in my qosmio G20 but displaying it on my TV
I connected it using S-Video cable and its getting displayed but no sounds, the sound is still coming from the laptop.
Is there a way I can make the sound come from the TV or my surround sound system?
Cheers

Hi
As far as I know S-video is just for video signal and on this way you can see just picture displayed on the TV. If you want to have sound you must connect headphone jack to the TV.
The best solution is if you use delivered SCART cable. On this way the picture and sound will be send to the TV.
Bye

How do I connect my Apple TV to my Philips surround sound DVD system?

I can't seem to get surround sound when watching Apple TV (or when watching live or recorded TV via my Virgin Tivo). I use a three-years old Philips DVD home surround system to get surround sound when I'm watching Blu-Ray (I have connected my Philips Blu-ray and my Philips DVD player without difficulty). But I can't figure out how to get surround sound whne watching Apple TV. I bought an optical cable with an audio jack on one end, to connect to the DVD player and the optical end clicks into the ATV. Still nothing. Any ideas?

The surround system seems to support digital audio - it has settings for HDMI audio and video (even though it doesn't actually have an HDMI port) I bought the optical/audio cable on the advice of a staff member in the Apple Store, but frankly, she didn't see, to understand my problem. She recommended I insert the cable into the "MP3 cable IN" port but that' not working.
I'm probably not explaining myself very well - bottom line: I have a DVD surround system and an Apple TV, so how do I connect them?

How can I connect my apple TV to my surround sound system without running any extra cables?

I have my Apple TV connected to my TV via HDMI. The TV is connected to an auxiliary box that outputs sound to house speakers. I don't want to run any additional wires because of the distance to my auxiliary box and the fact all my wires now run through the wall. Also the auxiliary box lacks any extra HDMI ports.
On cable, the TV sound plays surround sound, but on the Apple TV sound plays from the TV itself.
Is there any way to alter settings on the TV (LG LB6100 Smart TV) to change the sound source?

if you have a router and set it up for wifi and have ethernet plugged in then point your iPhone to that router and it will connect to the ATV.

HT1454 i connect my iPad to my tv with hdmi cable but the surround sound from the receiver is not working why is this?

i want to play my ipad on through my tv and receiver to get surround sound (not using the tv speakers) I connect the htmi cable to my tv and ipad do i need more cable to get my surround sound to play the audio? i thought hdmi did it all.

if you have a 6th or 7th gen classic, you'll have a have the video out cable from apple. only the 5th gen will play with a generic 3 connector video out cable.

How to connect Qosmio G20 to HD Plasma TV

Hi...I'm so confused!!!!....please can someone advise me......Been reading all the posts on this.....What is the best way to Connect G20-139 running Vista Home to a HD Plasma?????........Can i buy a D-video to HDMI cable (searched the net but not sure on what i'm looking for in a cable...LOL).....any help please....i'm no expert!!!!

Hello Pattayamad,
About your question:
Hi...I'm so confused!!!!....please can someone advise me......Been reading all the posts on this.....What is the best way to Connect G20-139 running Vista Home to a HD Plasma?????........
Right now you will not be able to connect your Qosmio g20 to a high definition TV. Not because the Qosmio, but because you are running Windows Vista on it. The actual nvidia drivers are not working properly to enable the Scan progressive output to your Plasma TV. You can use only the Svideo output, which is not so good. Lets wait for the new graphic drivers for the geforce go6600.
Can i buy a D-video to HDMI cable (searched the net but not sure on what i'm looking for in a cable...LOL).....any help please....i'm no expert!!!!
No, there is not a D-video to HDMI available. You can use the D-video to component cable (red, green and blue RCAs) or you can buy the SCART adapter to component, and use the cable supplied with your notebook (D-video to SCART) with this adapter.
but , if you want to output Scan progressive resolutions with the video component cable, you must use the windows media Center 2005 OS. Not working with Vista.
Francisco

How do I connect Apple TV and surround sound to my projector?

My current set up is that I have a projector connected to my Blu-Ray player. My surround sound speakers connect to my Blu-Ray player. They all came in the box together and the speaker wires all go into the Blu-Ray. Everything works perfectly.
However now I have bought an Apple TV and although I can play it through the projector, the sound is only through the projector and not the surround sound. I tried plugging the Apple TV in the HDMI in the projector and then connecting the Apple TV to the Blu-Ray via optical cable, but that didn't work.
In the back of the projector there is 1 HDMI port and an audio port but no optical port
In the back of the Blu-Ray, you have the speakers, the HDMI, the audio in and the optical port.
How can I connect everything so that I can use my Apple TV with surround sound?

The manual doesn't say anything an optical port on the BD ?

Connecting my MacBook Pro to my DVD Surround Sound Speakers?

I'm a student filmmaker in the UK and pretty much do all my video editing from my bedroom using Final Cut Studio. I am using a MacBook Pro3,1 (bought in 2007) and have recently decided that I want to start working in 5.1 surround sound.
As I have no surround sound speakers with my MacBook Pro, I was wondering if it would be possible to connect it up to my DVD surround sound system? This would ultimately save me having to buy a compatible set and having two lots of surround sound speakers around my room...
My DVD player is a Panasonic SC-PT150. The 6 surround sound speakers each connect to it through the standard +/- "clip-in" wire set up (which, obviously isn't compatible with my MacBook Pro). There are also two AUX sockets (one for Left and one for Right) on the back of the DVD player. So far, I have tried connecting my MacBook Pro to these sockets using a Mini plug to RCA cable, however, all I get is an incredibly loud humming noise.
Does anyone have any suggestions as to how I might, either overcome this problem or, get the setup to work another way? Thanks in advance for your help.

Thanks both of you for your help.
It doesn't mention either of those connections in the manual, however, yes you are right, it takes digital input. I'll have to call and check if the toslink cable is compatible.
I tried connecting the mini-stereo-to-RCA cable to my Nokia phone (which is actually where the cable came from) and that plays through the DVD speakers just fine, when i select AUX mode. Although, as you said, it only plays stereo.
Say the mini-toslink cable is compatible, would I need to get a 5.1 surround sound card for my MBP?
Thanks again.

Qosmio G20 VGA in for connecting to XBox 360

How can i connect a Xbox 360 to the qosmio using a VGA HD cable like this?
http://www.xbox.com/en-US/hardware/x/xbox360vgahdcable/
Is it possible to use the fantastic monitor of the Qosmio to play?
Any help apreciated

Mores is right, there is no VGA input on the Qosmio G20 (I wish there was though), you have to use an S-Video connection from your Xbox. Using the Qosmio player works perfectly well, there's no delay at all, the only problem I had was the video quality was utterly terrible. S-Video out from my 360 to a TV was fine, but input into the laptop looked awful, oh well!
Cheers,
Steve

Can I Connect an iPod Nano to Logitech Z-680 surround sound system?

I want to know if I can connect my iPod Nano 16GB to my Logitech Z-680 Surround Sound System. I already connect my MacBook to the system by plugging into the three plugs in the back of the controller then those three plugs merge into one plug which I then plug into the headphone jack on the side of my MacBook. Since the battery life of my MacBook is 2 hours, at best, Id like to use my iPod to play music. I tried plugging in the plug that I use for connecting my MacBook into the headphone jack of my iPod but I could not get any sound. The single plug seemed a bit small for the iPod. There are, also, two other jacks on the Logitech Z-680 controller, which are located on the front of the controller. One is for headphones and the other I am not sure. It has a musical note symbol above it. I have never used that jack before. Any suggestions/guidance is greatly appreciated.

This video guide should explain it:
Guide
I cannot see the video where I am right now, hopefully this helps. Unfortunately it's quite busy and difficult to answer your questions with the right research.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Is it possible to connect satellite dish directly to Qosmio G20?

Hy everyone,
I have a Qosmio G20-PQG21. The receiver is 60 meters away from laptop position. In this case the channel cannot be changed. The problem this person want to change the channels. The problem is quite simple... can i connect the coaxial cable from dish directly to tv tunner and setup the program guide? or do you have another solution for my situation?
Thanks in advance

Hi
In my opinion its not possible to connect the satellite cable directly to the Qosmio.
You cannot also connect the TV directly with the satellite dish. Its the same case on the notebook. You need a sat receiver between the notebook and sat dish.
There are two possibilities:
1.) You will buy a longer cable from the sat dish to the receiver and place the receiver nearer notebook.
2.) You will place the notebook nearer the sat receiver ;)

Connecting to Surround Sound (Qosmio G20)

Similar Messages

Maybe you are looking for