Connecting to Terminal Server though RDP or CoRD?

I am running 10.9.1.
I have used RDP and CoRd successfully in the past prior to the latest OS upgrade. Neither program will connect to the terminal server and no one can connect to my Mac using TeamViewer or any other remote in.
Any ideas for troubleshooting?
Thank you,
Jeff

Peter--
Welcome to the Apple Discussions.
I actually don't know anything about this, but, like you, I'd expect you to need an application for the connection. Microsoft has a Remote Desktop Client for Mac that might well be what you're looking for. My guess would be that the .rdp file they gave you is probably the configuration for your network.
HTH,
charlie

Similar Messages

Mac Client that can connect to Terminal Server Gateway

Anyone know of a Mac app that can connect to a remote computer via a Terminal Server Gateway? The Windows version of MS Remote Desktop will do this but of course that is Windoz only.

You could try CoRD. I don't know if it has the TS gateway option either, but it is an RDC client.
CoRD (Microsoft RDC Screen Sharing)
<http://www.macupdate.com/info.php/id/22770/cord>

RF's can't connecting to terminal server.

Hello,
I having trouble with my new terminal server. I am using RF's (intermec & motorola) in my business and We have two terminal servers that is running with 2008r2 standard. RF's can connect to first terminal server unproblematic but can't connect
to other one and getting error as "Because of a security error, the client could not connect to the remote computer, verify that you are logged on the
network, and then try connecting again"
I can connect to all terminal servers with my domain computer via remote desktop connection.
Own enterprise network has PEAP-WPA2 user authentication
Rf's are not in the domain.
I need help from you.
Thanks.

Hello everyone,
We found a solution regarding this case with microsoft team. Solution is in the following.
Issue Statement:
Cannot connect RF scanner to a particular server using RDP.
Symptoms:
> The RF scanners are Intermec CK3R devices with windows embedded handheld 6.5 classic installed on them. They fail to connect to
a particular server using RDP. However, same user and device can successfully connect to another server. The server to which the device fails to connect is TRKKTA01-N.
> Never been able to connect to the problem server.
> Both the good and the bad server are Windows 2008 R2.
> The Devices are connecting using per user licenses.
> We can connect to the problem server using a Fat client like Windows 7 machine with the same user ID.
> both the Problem server and the working server are in the same network but on different VLANs.
> On the Scanner, when trying to RDP user gets the following error:
"Because of a security error, the client could not connect to the remote computer, verify that you are logged on the network, and
then try connecting again"
> Already different encryptions have been tried but the connection still fails.
Environment:
RDS server is Windows 2008 R2. Clients are Intermec CK3R devices and OS is Windows embedded handheld 6.5 classic.
Scope Agreement:
We will close the case once we find the cause of the RDP failure and provide a possible fix for it.
If the problem is found to be due to third-party code we will provide information to substantiate this.
Case Status: Resolved.
Steps used to resolve the issue were:
1. Create the following reg key on the license server:
Use512LenPropCert on the Server
Subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Registry entry: Use512LenPropCert
Data type: REG_DWORD
Value: 1
2. De-activate the license server
3. Re-activate the server using the telephone method
4. Delete the x509 cert keys from the terminal servers
Best Regards,
Ufuk BAYGIN

Can't connect to terminal server via Mac RDC

Users can't log in to our terminal server (Server 2008) from Mac using RDC 2.1. After typing in the server name, the client asks the user to login. The user fills in their username, password and domain but receives and error stating "The credentials
that were used to connect to [server_name} are incorrect".
Any user, including myself who am a Domain Admin, get this error. When I log in using the domain's Administrator account, however, I can log in just fine.
None of this occurs when trying to login from a Windows client. The Mac I tested on is running OS X 10.5.8. Any help would be greatly appreciated. Thanks.

Hi,
For remote desktop in MAC OS, you can try to update the new Remote Desktop Connection. New Multiple Session Support gives Mac users simultaneous access to multiple
Windows-based PCs or to a network server that hosts remote applications and files. Since it is a Universal application, Remote Desktop Connection Client 2 is compatible with the latest technologies on Windows and Mac platforms.
Please refer to the following link:
Microsoft Remote Desktop Connection Client for Mac 2.1.1
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=18140
Setting 'Allow connections from computers running any version of Remote Desktop (less secure)' in the Terminal server to sees if it’s work well.
Technology changes life……

Acrobat 8 and 9 slow scrolling in terminal server or RDP

Adobe, there have been several postings here regarding the painfully slow scrolling introduced in acrobat 8 and 9 when viewing a multi page PDF via terminal services or RDP. It is discussed here in your forums and other internet forums. Have you a solution? Have you investigated this? It occurs not via a lan connection but a wan connection. You need to access an RDP session via dsl to reproduce this.
This is not a Microsoft Terminal services or RDP problem. It is an Acrobat problem. This did not occur with Acrobat 7. Thus the current method of fixing is to not install versions of acrobat above 7 or downgrade your Acrobat 8 or 9 install to 7. Not a lasting solution.
Acrobat, I implore you to investigate this problem and offer a solution.

I had the slow scrolling problem, too. Just occurred out the blue on December 15, 2010. Here's the simplest solution:
http://help.adobe.com/en_US/Acrobat/9.0/Standard/WS58a04a822e3e50102bd615109794195ff-7d1b. w.html
This link deals with the auto scrolling function under "View" at the top of your Adobe Reader page. Basically, with your Adobe document open and watching "auto scrolling" (i.e. your pages scrolling very slowly), hit a number (1-9) to adjust the speed of scrolling. I picked 5.
Then, go to "View" again and select "Auto Scrolling" to turn off this function.
Now, re-open your Adobe Reader document (if closed) and you should be able to scroll at a "normal" and not slow pace.
Hope I'm right with this one.
Happy Holidays.

UCS B blade connection to terminal server

I have a UCS B200 m3. I would like to have console access from a termial server directly to the blade. Is there anything that I need to enable on the ucs manager?
I can go into the ucs manager and click on "KVM Console" and get a session, but I need to have it through the term server.
To try to accomplish this, I used the console port on the blade. It comes with a dongle that connects there. That dongle has a serial, 2 usb and a video port.
I connected the serial end to a serial cable, and with a ethernet connector (those small square ones) to one end of an octal cable on my terminal server.
I'm not getting anything on the console through the term server.
In the ucs manager I've tried going into the servers->Policies->root->BIOS defaults->Cisco UCS B200-M3->Server Management
There I've enabled console redirection and 9600BAUD
Also tried on
servers->Policies->root->BIOS Policies->SRIOV to change the console redirection fields. I had no progress with that.
Has someone done this before that can help? Or someone that has an idea how this should work?

I have a UCS B200 m3. I would like to have console access from a termial server directly to the blade. Is there anything that I need to enable on the ucs manager?
I can go into the ucs manager and click on "KVM Console" and get a session, but I need to have it through the term server.
To try to accomplish this, I used the console port on the blade. It comes with a dongle that connects there. That dongle has a serial, 2 usb and a video port.
I connected the serial end to a serial cable, and with a ethernet connector (those small square ones) to one end of an octal cable on my terminal server.
I'm not getting anything on the console through the term server.
In the ucs manager I've tried going into the servers->Policies->root->BIOS defaults->Cisco UCS B200-M3->Server Management
There I've enabled console redirection and 9600BAUD
Also tried on
servers->Policies->root->BIOS Policies->SRIOV to change the console redirection fields. I had no progress with that.
Has someone done this before that can help? Or someone that has an idea how this should work?

Unable to connect to linux server though tight VNC server

Hi!
I have configured VNC server 4.1 for my Linux Red hat server. VNC server is working on port 5903 and user "oracle" is allowed to connect (It means he is vncuser). while i try to connect to server using VNC it prompts to enter password. It means server is reachable. But When I enter correct password it returns Authentication Failed even though password is 100% . To confirm password I changed it using "vncpasswd" command and then I restart the vnc service by $ service vncserver start command. The service started successfully but couldn't access the server through VNC.
I checked in /etc/sysconfig/iptables and it contains entry as
-A RH-Firewall-1-INPUT -p udp -m udp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 53 -j ACCEPT
So what anything else i m missing ? What should I do ?
Thanks & Regards
Tushar

Thanks
My remote server OS is Red Hat 5.2 . And I am trying to connect to my remote host server (Red hat 5.2 ) through VNC which is installed on my local system Windows XP. I usually use putty to get command base access of my remote server. I have also configured SSH tunnel in putty so that i can connect to VNC and get GUI access of my server.
What action will taken if i run command given by you. Do I have to reboot my server, if yes then it is not possible.
$ service iptables stop
I think there is no issue of firewall. Because it asks me to enter password .That means ping to server is reachable on port 5903.
My /etc/sysconfig/vncservers file contains following entry
VNCSERVERS = "3:oracle"
And one line for display resolution.

CONNECTION TO IQ server though DOTNET CODE

I want to connect to Sybase IQ server. I got connected Sybase ASE thru ASE CLient but I am not able to connect to Sybase IQ. I read on net that one need to connect thru SQL Anywhere for IQ servers.
I tried the same but my connection is getting dropped because of the error message
the server may not be SQL Anywhere Server.
The connection code that I am using for SQLAnywhere(Version 16) is :
SAConnection conn = new SAConnection("host=IQServerIPAddress:IQServerPort Number;UID='MyUserNAme';PWD='My Password';"); conn.Open();
The connection code that I am using for ASE is :
public AseConnection con = new AseConnection(); string conn = "Data Source=IQServerAddress";Port=IQServerPort;UID='MyUserNAme';PWD='My Password';"); con.ConnectionString = conn; con.Open();
We have AseClient to connect to a remote sybase ASE server for which we use "using Sybase.Data.AseClient;" DLL to connect to.
Do we have any IQClient as well to connect to a remote Sybase IQ server?
If Yes, What would be the name of the DLL that Supports IQClient?
Any Help is appreciated!!

Hi Abhishek,
There is IQ Client called IQ Network Client. It contains connectivilty librararies (odbc, jdbc, ..).
Once IQ client installed, they libraries are placed in bin64 in Iwndows and lib64 in Unix ($IQDIR16/lib64/)
To download it
https://support.sap.com/software.html (see screen capture)
Sybase Products--> SYBASE IQ--> SYBASE IQ 16.0
SYBASE IQ NETWORK CLIENT 16.0
OR
SYBASE IQ ODBC DRIVER 16.0
Regards,
Tayeb.

Server 2008 TS - some client could not connect to the server

Hi guys,
I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
"Because of a security error, the client could not connect to the remote computer.
Very that you are logged on the network, and then try connecting again."
I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
http://support.microsoft.com/kb/2477176/hu
(These scanners can connecto to another Terminal Server.)
Is it client or server-side issue?
Have you another idee?
Regards,
Gabor

Hi,
Thank you for posting in Windows Server Forum.
Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
You can also refer below article for additional information.
How to resolve the issue “Remote Desktop Disconnected” or “Unable to
Connect to Remote Desktop (Terminal Server)”
Hope it helps!
Thanks.
Dharmesh Solanki

Entorno Terminal Sever / Terminal Server environment

Hola,
estamos migrando todas las aplicaciones delos usuarios de nuestra organización a un entorno de terminal server. Todas las aplicaciones residirán en el servidor.
Instalamos BDS en el servidor pero no logramos que funcione al conectar el dispositivo en el PC local a través de terminal server.
Utilizamos la versión 6.1 del cliente de escritorio remoto.
Se puede hacer o al estar el dispotivo conectado localmente no es posible realizar la sincronización?
Gracias.
Un saludo.
Jordi
Hi,
we are migrating all the applications of our users to a terminal server environment. All the applications will reside in the server.
We installed BDS in the server but when we connect the device in the local PC it doesn't work when we connect across terminal server.
We use rdp client 6.1.
We can do it or it is not possible?
Thanks in advance.
Regards.
Jordi

Hola,
estamos migrando todas las aplicaciones delos usuarios de nuestra organización a un entorno de terminal server. Todas las aplicaciones residirán en el servidor.
Instalamos BDS en el servidor pero no logramos que funcione al conectar el dispositivo en el PC local a través de terminal server.
Utilizamos la versión 6.1 del cliente de escritorio remoto.
Se puede hacer o al estar el dispotivo conectado localmente no es posible realizar la sincronización?
Gracias.
Un saludo.
Jordi
Hi,
we are migrating all the applications of our users to a terminal server environment. All the applications will reside in the server.
We installed BDS in the server but when we connect the device in the local PC it doesn't work when we connect across terminal server.
We use rdp client 6.1.
We can do it or it is not possible?
Thanks in advance.
Regards.
Jordi

What do I need to do to allow multiple users to connect to a Server?

Hi,
What do I need to do to allow more than two people to be able to connect to a server via RDP?
I am using Server 2012 and I need 4 clients to be able to RDP in.
The clients will only be accessing the Server from our internal network while they are onsite.
Do I have to setup Licensing and what other steps do I need to do?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of Hari. Normally by default server will allow only 2 remote connection for administrator purpose. So you want 4 users to connect you need RDS CAL to access it. As already suggested you can purchase RDS CAL (Per User or Per Device) according
to your requirement.
After installing RD License server you need to activate it first and then you can install the purchased RDS CAL.
More information:
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

SAP Connectivity slow - Terminal Services

Dear ALL,
we have two Locations (A & B) & Main Server is placed at Location (A) and users from Location (B) connect through terminal Server (IBM Server) there are approximatly 6 users who connect at a time to terminal server, so what should be the RAM size of the Terminal Server.
As of now we have given 2GB RAM, But the performance is very Poor
Applications:
SAP 2007B & 4 ADD-ons
Thanks in Advance

Hi Pankaj,
Check the following link
Sizing a Terminal Services server for Business One
Re: SAP BUSINESS ONE IS SLOW
Re: Slow SAP connection
SAP Business One Best-Practice System Setup and Sizing
*Close the thread if issue solved.
Regards
Jambulingam.P

Terminal Server Printing with OSX

We have a windows 2003 terminal server.
We have 10 remote powerbook users with OSX.
All the remote users have printers "without" postscript capabilities.
We want to remote access the terminal server, using RDP, and have the ability to print on the local users printers.
How can we achieve this. We can find no support for this anywhere on the web.
Need urgent assistance.
Thanks
shooshine

I'm not quite sure what you and your IT manager tried, so I'll try to restate myself.
If you don't have the ability to install printers "locally" on the server (many users are restricted to installing only "network" printers) then your IT manager should create a new local printer on the server and one of the default "ports" you can select is "Print to File". This is in the same dropdown list that includes LPT, USB, etc. As you continue through the printer configuration wizard you'll be asked to select a printer descirption. A "generic" Postscript description is fine for standard page sizes such as Letter, Legal, etc.
You would then (through RDC) open your document and print, selecting the "print to file" printer. You'll be asked where to save the .ps file. I suggest the Desktop so that it's easier to find.
Then you can open the "My Computer" icon where you'll see the C: drive, D: drive, etc., and (if you've configured your RDC client to share your Mac's local disk) a drive letter assigned to your Mac disk. Copy the .ps file to your Mac's disk, which will copy it to your Mac's hard drive.
The Preview application can open Postscript files and render them on-screen. Once you're this far, it's should be simplay a matter of printing to your locally attached printer or saving the file to a PDF or similar file format out of Preview.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.9)

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

RDP to a Terminal Server via TTPT not working through routers.

I am having problems using RDP to a terminal server through a user home router and DSL connection.
User has a Linksys WRT5G v3 (Firmware 4.21.1) connected to a Cisco 678 DSL Modem.
If I direct connect the home computer to the Cisco DSL Modem everything works fine. When I try to go through the Linksys, I can get the PPTP authenticated but the RDP client just times out.
It would seem like this is a port forwarding issue, but I have tried to use the port forwarding to the IP address of the home computer(statically assigned) by forwarding ports 47, 1723 for the PPTP and port 3389 for RDP.
I have seen the same issue on my home Broadband cable setup with a NetGear Router. Having spent over an hour with the NetGear technical support without resolution. I swapped in a old Linksys Wireless Router BEFW11S4 v4 (firmware 1.52.02) and it fixed the issue.
What is the issue with some home routers letting RDP out? Is there a known model that it will work on?

I believe I have found what my issue is. The older Linksys BEFW11S4 model has a “hard coded” DHCP Server Start IP Address range of 192.168.0.X you can only change the last octet. The newer Linksys WRT5G and WRT54Gs have a “hard coded” DHCP Server Start IP Address range of 192.168.1.X.
Apparently this is their “dumb downed” solution for home routers. They do not allow you to select a different subnet to hand out with DHCP but interestingly they do allow you to fully configure the LAN IP address.
How this affected me is that my target server/network uses the same 192.168.1.X addressing scheme.
I was able to use the newer router by configuring the LAN address to like 192.168.0.200 and turning off the DHCP server. Then I assigned a static IP address to the computer in the home network to something like 192.168.0.250. Then I could successfully use PPTP and RDP to connect to a terminal server.

Connecting to Terminal Server though RDP or CoRD?

Similar Messages

Maybe you are looking for