Connecting to the mobile device

Hi ,
We have installed the MAM 2.5 Application successfully on the system.
The Application is working fine now.
We have to use the mobile device now we are planning to connect it to the
system and then perform the sync.
Are we supposed to install mobile Engine again on the device and install the
application or in the first sync we get the application the device.
Can you let me the procedure how to get the application on the device.
Thanks,
Aswini

Hi Aswini,
You will need the following three CAB files to Install SAP MI Client on your PDA.
1.Creme cab file
->CrEme327a_AX_CE50_PPC_minimal.CAB file if u are using the Mobile 5 Device.
->CrEme327a_AX_CE42_PPC_minimal.CAB if u are using the Mobile 2003 device.
You can download the creme from NSICOM site.
http://www.nsicom.com/Default.aspx?tabid=159
2.Jsse file.
3.MI Client cab file.
->MI25Tom_en.CAB..file.(You can download the same from service.sap.com)
First you should connect your PDA with PC via USB/Active sync.
Then Copy these files in temp folder of your device.Then Click on cab files in following sequence creme->jsse->MI Client cab file.to install the SAP MI Client on to your device.Once the SAP MI Client is installed on your PDA.You can download the MAM Application in the sameway as on desktop PC.
Hope this helps.
Thanks
Regards
Devendra

Similar Messages

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

When i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help?

when i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help????

For Windows: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

How do I connect to the mobile database in c#?

I am creating a application in c# for windows mobile 6 using Oracle Database Lite.
The problems start by not understanding the tutorial in vb of the transports. I want to make the connection string and the program stops with an error.
The way I am creating the connection string is the following:
String connectionString = "dsn=msus;uid=system;pwd=" +++ _password;+
_connection = new OracleConnection(connectionString);+
_connection.Open();+
The error in the mobile device is:
POL-5150 access violation
Every steps of creating publications items an publication on the Mobile Server was successful. The msync synchronized with no problems. User has privileges for using the application. I think this is not the way of making the connection string, but I can't find the right one!
Thanks for the support.

the _password is the password of the user hzenha... which is hzenha... I am send it as an argument to the method that as the code I've shown in the first post. The code is the only one I use about connections to the database... I don't access it elsewhere.

How to edit the nbu file when the mobile device is...

How to edit the nbu file when the mobile device is not connected?
That software that is available in the nokia site “nokia phone browser” is not useful! Why?
It is not working unless the mobile device is connected (attached)
It is quite slow when editing the contacts! (attached)
Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
Is there some workaround in this regard?
Is there some software the can edit the nbu files?
Thank you for the help,
Best
Jamal
Attachments:
Clip_774.jpg ‏166 KB
Clip_775.jpg ‏127 KB
Clip_773.jpg ‏243 KB

when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
Merry Chrasmas too ;-)

An unknown error (-15006) occurred while connecting to the AirPlay device "Living Room Apple TV".

Hi All, need some advice here, this occurs in iTunes these days never had this prob before Using iTunes Airplay or AppleTv.. It's irritating Me!An unknown
,, error (-15006) occurred while connecting to the AirPlay device “Living Room Apple TV”.''''
Thanks for possible solutions
BossJoop Imac + 2012, 3e gen Apple tv + all latest software and updates

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your computer.

Not getting all the notifications to the Mobile Device

Hi All,
We are not able to get all the notifications that are assigned to the mobile device. Only part of the notifications are downloading to mobile device. I can see using MAM30_011_GETLIST there are 195 notifications assigned to that device. Out of 195, I can able to see only 97 notifications on the device.
I debugged and found that whenever I am creating a notifications using some functional locations either from the backend or using mobile device that never get downloaded to mobile device.
Please through some light on this issue I would be grateful to you.We are using Server Driven Functionality.
MAM version is MAM30 SR05.
Regards,
Scott.

Hi,
The reason is very simple here. Some of the notifications are referring to technical objects(equipment/functional location) which are actaully not present on the middleware. So when a user request for data from the client to the middleware, because there is a reference from notification to technical objects, middleware will only send those notifications whose all references are actually present on the middleware.
So the way to check if all the technical objects are present in the middleware or not, you can do the following:
1. First check the no. of entries for both equipment and functional location in the middleware.
2. Then later go to the backend, as yours is server driven, then i would say go to variant of technical objects, execute the variant and make a note of the no. of entries it gives.
3. Verify if both middleware and backend gives same no. of entries.
If no, then try to correct the replication and then do a sync from the client.
If yes, then what I see is, even though you have all technical objects selected as a part of variant, there are still some notifications with technical objects which are not a part of technical objects selection in the above variant.
So, try to change the variant for technical objects to get more no. of technical objects which covers all the technical objects that might be a part of your notifications.
Hope this solves your problem.
Thanks & Best Regards,
Siva.

I lost my Sync Key on my Desktop Firefox, but i still have it on my Firefox Home (IPhone 4). Is there a way to restore it/show it on the mobile device?

I'm trying to resync my newly set-up Firefox on Mac OS X. Somehow it never occured to me, that i'd have to save the key.
So is there a way, as stated in the title, to restore my Sync key from the mobile device, without deleting all of my Bookmarks etc?
thanks in advance

Hi,
Sorry to read that. Unfortunately, because of security reasons, there's no way to retrieve your Sync key from any mobile device. That's why it's really important to keep a secure back up of it.
The only remaining option at this stage is to save your bookmarks on the phone and manually migrate them to your computer. Once you have done this, reset your account.

HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Getting "There are no speakers connected to the AirPlay device " device-name "

For the past several years, I have had a stereo receiver hooked up to and airport express to stream music wirelessly from my iMac to stereo speakers. All of a sudden, I started getting the message "There are no speakers connected to the AirPlay device "<device-name>". So, what changed, we recently changed ISP from Verizon DSL to RCN cable, I changed my Apple ID (due to the ISP change), I upgraded all computers to OS X Lion, and I have a new iPhone5. I can't tell you exactly when during the process things went bad, but I can tell you what I have done to solve the problem:
I checked that my devices are configured correctly. The network layout is as follows: I have an Airport Express on the 3rd floor of my house, along with the iMac containing the iTunes library, I have an Airport Express on the 2nd floor acting as a repeater, I have an Airport Express on the 1st floor acting as a repeater and connected to my stereo receiver and 4 speakers. I control which set of speakers is "on" via the receiver.
I checked that I can get sound out of the speakers via the receiver by selecting FM and got radio to play, so I believe the receiver is ok.
I swapped this receiver with another receiver and got no sound and still the message "there are no speakers connected..."
I moved the Airport Express from the AUX port to the TAPE2 port to check the port. Still no sound.
I checked the cable with a Bose box and got sound, so I believe the cable is ok.
I plugged a headset directly into the Airport Express and got no sound.
I swapped the 2nd floor and 1st floor Airport Express units, reconfigured the new 1st floor unit to turn on Air Play and still get no sound and the error message.
I am controlling the music using the Remote app on my iPhone. I have configured the new device to use this library.
I am tired, confused and at a loss. What can be going on here?

All that I can suggest is that you perform a Factory Default Reset on the Express to wipe the current settings and set it up again.
If you are still having problems after that, you need to take the Express to an Apple Store or Apple Servicer near you to let them have a look at what I suspect is a defective AirPort Express.
Resetting an AirPort Base Station or Time Capsule FAQ

When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

See Here... http://support.apple.com/kb/TS1567

Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

I have the same problem - did you solve it?

I can't get version 11.1.4 to install because it fails to get the Mobile device program. I don't have any mobile devices. How can I overide this so I just get iTunes on my PC?

I cannot get iTunes 11.1.4 to install. I have tried uninstalling iTunes and downloading itues again witha manual install. It always fails because it cant get the mobile device part to work. I am the administrator and I don't have ANY mobile devices. I just want to update the program on my PC - and now I don't have any iTunes at all.

The best information on dealing with the iTunes install is in the user tip: https://discussions.apple.com/docs/DOC-6562

"An error occurred while connecting to the AirPlay device "Living Room Apple TV". An unknown error occurred (406)."

This error message keeps popping up overtime I try to play an iTunes bought tv show from my mac book pro to my apple tv "An error occurred while connecting to the AirPlay device “Living Room Apple TV”. An unknown error occurred (406)."
Does anyone know what this means and how to fix it. Both devices are registered on the same apple id and password. This problem just started happening within the last week or so but prior to that everything was working as it should have. In fact since the launch of icloud things have been glitchy for me with purchasing and playing off the apple tv as well.
Can someone please help?'
Thanks

Unfortunately Apple's error codes are very much a mystery (at least to me), try restarting the Apple TV, iPad and router. If that doesn't help look into whether you might be encountering interference on your network.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

An error occurred while connecting to the AirPlay device "Apple TV". An unknown error occurred (-15000).

Hi ,
I acquired an Apple TV (Gen3) a couple of days ago.
The Apple TV seems to be connected properly to WIFI (Good signal)
I watched streaming videos on Youtube and film trailers – the speed is ok.
I followed the protocol but, still, I cannot connect Itunes to the Apple tv.
These are the error messages:
On the TV : apple tv could not connect to library
In Itunes: An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000).
Please note that Apple TV doesn’t appear in the list of devices in Itune’s preferences menu.
The Home Share is enabled on both devices and I connected with the Same Apple ID on each device.
Airplay is on.
Ref Apple TV :
Apple tv: Model MD199HC/A
Serial number DY******RHN
apple tv software : 5.3(6105)
Imac: OS X version 10.8.4
I already tried to :
Unplug/plug modem and router
Test connectivity
Disable the Firewall
Re-enable the firewall with Itunes in the list of ‘allowed’ devices
Re-set Apple TV (3 times) + Up to date
Re-start Apple TV and computer several time
Itunes is up to date
Could you please help?
Many Thanks
Sylvie
<Edited By Host>

Hi all,
Thanks for your comments.
In my knowledge, there isn't any security software active on my computer.
After re-setting my routeur several times, I finally swapped it against an Airport Time Capsule.
It solved the problem, however, I would be interested to know if a (less expensive) solution exists.
Sylvie

Connecting to the mobile device

Similar Messages

Maybe you are looking for