"Connecting to the network is taking longer than usual" message after I wake my computer from sleep

Connecting wirelessly after waking computer from sleep yields the message "connecting to the network is taking longer than usual". This only occurs after sleep, it also does not allow it to autoconnect like when starting the computer up. All
drivers seem to be up to date and happens at more than one wireless location, home and school. I have a windows 7 opperating system.

I just had the same problem with my HP Pavilion dv6 laptop.
I was able to resolve the problem by uninstalling my Intel Centrino Wireless Network adapter (but I did not delete the driver). I did this by right-clicking My Computer, Manage, Device Manager, expanded the Network Adapters group, and right-click the
Wireless Network Adapter and click Uninstall. I recommend that you reboot once this is done.
My laptop now connects to Wifi immediately after waking the laptop from sleep.
This is what finally resolved my problem. Sony Vaio with 64bit Windows 7. Wireless would sometimes take up to 3 minutes after Windows started to connect. After following these instructions, I first removed all wireless networks, then from the System Control
Panel I deleted (along with the driver) the Wireless Adapter. I then installed a fresh driver directly from the maker (not OEM).
I now connect to Wifi immediately after booting or waking from hibernation.
Thank you
Emmitt<abbr
class="affil" style="border:0px;font-style:inherit;font-family:inherit;margin:0px;outline:0px;padding:0px;display:inline-block;vertical-align:top;color:#000000;"></abbr>

Similar Messages

Satellite L735 taking longer than usual to start-up

My toshiba Satellite L735 was taking longer than usual to startup (more than a minute, usually takes 40 secs) gave it to the service centre, they said they updates the BIOS, optimised processor calculation, formatted it.
It was fine again, but the problem was back in less than a month, took it again, the person at the counter just reduced the unnecessary programs from the boot list, came back home to notice it was taking even longer to startup (more than 2 mins).
When i switch it on, its all fine i get the windows logo in no time, but after that a black screen appears and stays for about a minute and a half, then the homescreen appears, the windows startup sound thats supposed to play as soon as the homescreen appears plays about 40 secs aftr the homescreen has appeared.
Please help.
Thank you.

Hi
The notebook seems to load the windows slowly because too many processes would be loaded at the beginning.
First of all I recommend downloading and installing the CCLeaner. This freeware tool would help you to clean the registry and to remove the garbage from the system.
Furthermore you should check your processes which would be loaded at the beginning.
Start msconfig and go to StartUp tab. Here you can disable no necessary and not important processes.
I dont know how many computer experience you have so be careful with that.
If you dont know exactly what the single process does, google for more details.
Removing a mark near the process will disable this you can enable this later too
Furthermore I would recommend checking your antivirus software I switched from Norton Antivirus to Avira Antivir software because it much faster and does not need a lot of hardware resources the Avira antivir is freeware software so you can install and use it for free.
Last but not least defragment the HDD to ensure faster data access
Good luck

MOSS 2007 Search - Crawling is taking longer than usual time since last month for same content sources

Hi all,
Off late we have discovered that content crawling is taking longer than expected also overlapping to next scheduled too. Literally no crawl logs seen for hours. No entry in crawl logs. Is there anyone out here having similar issue? Please share a solution
if any found.
My farm is implemented with MOSS 2007 SP2 Ver no 12.0.0.6554
There is not packet drop between index server, App and SQL server/Cluster
Thank you in advance,
Reach Ram
Ramakrishna Pulipati SharePoint Consultant, Bangalore, INDIA

I believe this is ready for submission for the Time Machine forum.
As noted, it does not cover diagnosis and correction of specific problems or errors, as that would seem to be better handled separately.
It also doesn't cover anything about Time Capsule, for the very good reason that I'm not familiar with them. If someone wants to draft a separate post for it, or items to add/update here, that would be great!
Thanks very much.

Apps taking longer than usual to load

lately, I have noticed that it is taking a really long time to launch applications on my macbook pro. what can I do to speed up this process, or would I be better off reinstalling Snow Leopard? thanks!

I have tried rebooting several times in the last 3 days, but that doesn't fix my problem. My system has 4 GB memory, and it doesn't ever run out of it since I got this mac...
as for page in/out, so far, i've had 95419 page ins, and 52916 page outs.
For CPU Time, Chrome has had 7:47.83 and kernal_task has had 5:06.59 (and over 30 million sent messages).
the one thing that seems to run really high is something called 'intercheck' it has had 1:27.10 CPU Time!
the main reason for my inquiry is because I've been noticing that my battery is not lasting longer than 2 hours between charges. Thanks for your help... I might take it into a genius bar tomorrow if we can't resolve this issue before then.

Exchange issues synch taking longer than usual

This issue is a little difficult to describe. But now when I go to my exchange email "inbox" it seems like it has to download the entire list again, or that its downloading it from a point. For whatever reason it seems like the "synchs" aren't taking hold and require a full download to take place, whereas a check for mail might have taken 5 seconds before, now I go to my inbox and its empty and can take up to two minutes to show me my mail.
I've tried a full reboot of the ipHone. But other than that I'm not sure where to go?
Thanks in advance!

Hi.
I have run the first two cc requests that the note suggests and I am awaiting a response from client.
On a related note, I have enabled the tracing on a user while he makes the responsibility switch.
The log file generated, makes no sense to me at all. What am I supposed to be looking for! Any "errors" or "warnings" I guess ....?
I will paste a few lines below that document when the responsibility change is being made:
In Argument 0 - Type: Number Value: 263
In Argument 1 - Type: String Value: DEFAULT
In Argument 2 - Type: Number Value: 0
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.FND_ORG_ID
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.FND_ORG_NAME
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.FND_ORG_CODE
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.FND_CHART_OF_ACCOUNTS_ID
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call to FNDSCSGN new_resp.
In Argument 1 - Type: String Value: global.frd_debug
FNDSCSGN, -2, Prog Unit, Exit, 303466015, /FNDSCSGN-1/NEW_RESP
FNDSCSGN, -3, Prog Unit, Exit, 303466015, /FNDSCSGN-1/P58_02_DEC_201019_35_21
FNDSCSGN, -4, Trigger, Exit, 303466015, SWITCH_RESPONSIBILITY
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard_private.switch_responsibility.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is SWITCH_RESPONSIBILITY.
In Argument 1 - Type: String Value: global.frd_debug
FNDSCSGN, -5, Prog Unit, Exit, 303466015, /FNDSCSGN-1/P41_02_DEC_201019_35_21
FNDSCSGN, -6, Trigger, Exit, 303466015, MENU_TO_APPCORE
FNDSCSGN, -7, Prog Unit, Exit, 303466015, /DMU-2/P11_02_DEC_201019_34_33
Thanks,
DA.

PayPal to Bank Acct. Taking Longer Than Usual

I'm a new poster here who has used PayPal to receive payments and transfer them to my bank account here in Mexico for the past two years. Since I began this process, the transfers have always arrived in my bank account between 36 to 60 hours after the initial transfer request unless it was the weekend. Basically, it's always taken 24 hours for the transfer to show up as "completed" and then another 12 to 36 hours to be available at my bank depending on whether I made the initial request before or after 2:00pm local time. My latest transfer request (from PayPal to bank) was solicited Monday, August 3rd during the morning hours, meaning the funds would in the past be available to me on Wednesday. It is now Friday, and the funds still aren't there. The email I received from PayPal when making the request says that it should be available by Aug. 11th so I guess I'll have to wait until then before contacting support, but the transfers have always gone through like clockwork until this one. My PayPal account is verified and is linked, etc. Has anyone had a similar case in which transfers to a bank account are consistently successful within a short time frame and then all of the sudden a transfer is days later than usual arriving in a bank account? There's nothing different on the PayPal request nor at my bank that would cause this unusual delay as far as I can tell. Thank you in advance for your feedback.

I have tried rebooting several times in the last 3 days, but that doesn't fix my problem. My system has 4 GB memory, and it doesn't ever run out of it since I got this mac...
as for page in/out, so far, i've had 95419 page ins, and 52916 page outs.
For CPU Time, Chrome has had 7:47.83 and kernal_task has had 5:06.59 (and over 30 million sent messages).
the one thing that seems to run really high is something called 'intercheck' it has had 1:27.10 CPU Time!
the main reason for my inquiry is because I've been noticing that my battery is not lasting longer than 2 hours between charges. Thanks for your help... I might take it into a genius bar tomorrow if we can't resolve this issue before then.

Rendering taking longer than usual

I'm cutting on FCP 6.0.6. I've noticed its taking a lot longer to render these days. Anyone know why? Thanks.

Do you really mean I should erase the entire cache of a project with a few hundred clips spread through several sequences? How long would it take to build it back again? Is there any chance something might go wrong and it doesn´t build everything back, throwing away hundreds of hours of work? I´m just doing the final touch ups in the project, can´t afford to go back, audio editing being the main concern (it was quite complicated).
If I copy the entire cache to some other folder before cleaning it up and something goes wrong when building it back, can I just paste the backed up cache into the former folder?
I run the system on a SSD for programs with 65,2GB free right now and it´s only 12% fragmented (very little, right?). the Raid has 750GB available. It was 10% fragmented but the project continues to freeze after defragmenting (have still to defragment the SSD, but I don´t know if I should do it now: the little I mess with it the SSD the better, right?).
Thanks a lot!

Insert taking longer than usual

One of my single row INSERT operation is taking ~20 sec. It has a CLOB column (REQUEST_VALUE). This is a 2 node RAC setup.
Any pointers?
Here is the tablespace configuration.
dba_tablespaces:
PROD01_DATA
PROD01_LOB
dba_segments for the table
Tablespace: PROD01_DATA
dba_lobs for the table
SEGMENT NAME SYS_LOB0000033324C00003$$
COLUMN REQUEST_VALUE
TABLESPACE PROD01_DATA
dba_data_files: PROD01_DATA
BYTES 2147483648
BLOCKS 262144
STATUS AVAILABLE
RELATIVE_FNO 11
AUT YES
MAXBYTES 1.6106E+10
MAXBLOCKS 1966080
INCREMENT_BY 1
USER BLOCKS 262136
USER BYTES 2147418112
dba_data_files: PROD01_LOB
RELATIVE_FNO 16
MAXBYTES 1.0737E+10
MAXBLOCKS 1310720
(others same as PROD01_DATA)
From the AWR:
Cache Sizes
Buffer Cache:     640M     576M     Std Block Size:     8K
Shared Pool Size:     832M     896M     Log Buffer:     30,732K
Shared Pool Statistics
Memory Usage %:     90.75     87.80
% SQL with executions>1:     98.23     95.79
% Memory for SQL w/exec>1:     97.24     95.5
Top 5 Timed Events
Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Clas
CPU time          583          49.1
reliable message     7,972     78     10     6.6     Other
db file sequential read     31,566     41     1     3.5     User I/O
control file sequential read     58,149     40     1     3.4     System I/O
latch: shared pool     188     34     179     2.8     Concurrency
Edited by: hardcodr on Jul 8, 2011 11:09 PM

If you really want to know where time a spent for a specific SQL statetemet you should use SQL trace and TKPROF for the related SQL statement.
See http://www.oracle-base.com/articles/10g/SQLTrace10046TrcsessAndTkprof10g.php.

Emptying the trash taking long than normal

I started to have a problem to empty the trash, is taking longer than normal to empty. This started two months ago. Any ideas of what coud it be?

Hope this helps.
http://reviews.cnet.com/8301-13727_7-10420037-263.html

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

TS3798 Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

Have you tried rebooting your wireless router by removing power from it for about 30 seconds, then powering it back up?

I went to back up my iPhone4 and it said there was an update. So I clicked on 'update and backup' (or something close to that.) It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes. ***??

I went to back up my iPhone4 and it said there was an update. So I clicked on 'update and backup' (or something close to that.) It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes. ***??? I restarted my computer and tried the whole process again and still...the power cord with an arrow to iTunes. And I know this means I have to go to Apple and get another phone and will lose anything that wasn't backed up. Anyone else have this happen or have a solution so I don't have to do a restore???

Reboot your computer.
Disable your antivirus and firewall.
Connect the phone to a USB port directly on your computer, not to a hub. If your computer is not a laptop and has ports on both front and back use a port on the back.
If iTunes does not recognize the phone when you connect it see: http://support.apple.com/kb/HT1808
If it STILL doesn't work open a command window and type:
netsh winsock reset
Then try again. (It seems that a recent Microsoft Windows update may have corrupted network settings; this restores them to the factory default).
BTW, was there an error number associated with the failed update?

Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

My Apple TV is reading " There was a problem connecting to the network" error - 3906

I have reset all network components and the Apple TV. I first set up Apple TV and it worked beautifully. The next time I turned it on it gave me the error message. I have tried reconnecting to the netwrk multiple times. I have my laptop and my ipad connected to the network, but the Apple TV will no longer connect. I am out of solutions. Any suggestions would be greatly appreciated. Thank you.

I had the same problem. I just solutioned it just by disabling MAC Address filtering in my LinkSys router. This is strange as I did enter the address of my ATV3 in the list of allowed devices in the router configuration software.
The truth is that it now works! I just seems that ATV is not compatible with MAC Address filtering.

Suddenly can't connect to internet even though it's still connected to the network. Why?

My ios 5.1.1 ipad 3 is less than 1 year old and has been connecting fine in my room. Then suddenly internet stopped working even though it's connected to the network. Tried restarting, forgetting, resetting. It worked for like 1 min randomly, then stopped working again. It only works if I move closer to router. Laptop and another Ipad both work fine. Just don't understand why my ipad stopped working suddenly when it was fine before.

Yes I do want my problem fix. Thank you for helping.
I was just wondering why it would be the router when my ipad connects if it's closer to the router and everything seems to be working fine too.

"Connecting to the network is taking longer than usual" message after I wake my computer from sleep

Similar Messages

Maybe you are looking for