COnnecting to two different powered speakers in two different rooms???

I have a Linksys router with iTunes running on my PC which I can send a signal out to my living room AP express to recieve my iTunes @ my powered speaker. I now have added another AP express in my bedroom along with another powered speaker. Is it possible for iTunes to "broadcast to all", or are we stuck selecting "My Computer" or one of your powered speaker sets?
Windows XP

HI Jimithang:
Welcome to Apple Discussions!
With the most recent version of iTuens (6.0.5) and
the most recent firmware updgrade for your Airport
Express
http://www.apple.com/support/downloads/airportexpressf
irmwareupdate63forwindows.html
iTunes will allow you to stream audio from iTunes to
multiple Airport Express units at the same time(and
even the computer)
You also may be interested in Airfoil, a program that
will allow you to stream audio to your Airport
Express from just about any application.
http://www.rogueamoeba.com/airfoil/
Let me know how it works out for you!
THANK YOU SO MUCH!! I am now streaming real time to 3 different rooms and it sounds amazing. Thank you very much for your quick and detailed response. Apple Rocks!

Similar Messages

Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid.

11g Multiple Rpd on one BI server connecting to two different data marts

Hi
Did anyone tried and successfully implemented multiple rpds on one bi server. I have similar requirement in one of the clients place.
1. Install OBIEE 11g with vertical scaling( reason client doesnt want to spend extra money on additional server licenses) and would like to utilize the powerful existing servers.
2. Install 2 rpds on One BI Server and connect to two different datamarts.
3. Create two PS and provide two links to have two different reporting environments.
Appreciate with any pointers. I am very clear on Vertical Scaling and bumping up the Bi , PS and Java Hosts components. I saw a post with successful implementation of the same functionility in 10g and nothing in 11g. I already reviewed ritmanmeed blogs but did not give a complete picture of successfull implementation.
Thanks

Hi,
Yes, it is possible to have two different .rpds on one BI Server but then you need to set up two different Presentation Servers.
Refer the below threads for more information.
Re: multiples RPD in one server
Re: Multiple RPD & Multiple Presentation service instance on single BI Server
https://forums.oracle.com/forums/thread.jspa?messageID=9189677&#9189677
Can i put two rpd files in nqsconfig init file in BI Admin
Hope this help's
Thanks
satya

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

JDBC connection to two different machines from the same program

I want to use JDBC to connect to two different databases that are on two different MySQL installations on two different machines.
One of the installations is MySQL 4.1.12 and the other is 4.1.14-nt
For some reason, all my statements seem to be going only to one machine, even though I am very clearly set it up to go to two different machines.
Does anyone know whether connecting to two different installations from one program presents any unusual problems?
Thanks.

Unless there is some horrible defect in the MySQL JDBC driver (which I doubt!), there should be no problem and like the other poster says, please post snippits of your code so we can see what your doing...

TS1398 I am unable to connect to two different wifi at different locations having same name but different passwords

I am unable to connect to two different wi if at different locations having same user name but different password one is at home other at work

I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.

Connecting to two different SQLServers present on different Locations

Hi,
How can i connect to two different SQL Servers which are at different locations in the same session? IS there any way to do this without disconnecting from the first server?
cheers,
Sachin

Well,
actually my problem is that im reading Database
e Properties through a file which contains multiple
database entries. And i have only one Connection
Object so if im logged into one ex SQLServer in
London, I have a class which will allow me to loginto
another database SQL Server at New York. Now how do i
keep my connection as well as connect to New York
Database Server with the same Connection Object. If
possible, I need to logoff from the Server at London.
How do i do this? Any Ideas?Redesign. You have a connection object that can only have one connection. Either you have to close that connection and reconnect to the other one, or you need two of them. Those are your choices.

Is it possible to connect to two different clusters?

Hi,
I was wondering if it was possible to connect to two different clusters from the same process?
What I would like to do is to able to get some cache on the first cluster and others on a second cluster. The cache-config DTD doesn't seem to forbid the definitions of several remote-cache-scheme. So I should be able to map all "c1-*" caches to the first cluster and all "c1-*" caches to a second cluster...
Is it possible?

Thanks,
Yes I'm connection via extend.
Could you give me an example of such configuration? I've made a test from a C++ client with the following client config:
====================================================================
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>c1-*</cache-name>
<scheme-name>extend-1</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>c2-*</cache-name>
<scheme-name>extend-2</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
<scheme-name>near-c1</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-1</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<near-scheme>
<scheme-name>near-c2</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-2</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001413</address>
<port system-property="tangosol.coherence.proxy.port">4321</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
<remote-cache-scheme>
<scheme-name>extend-paul</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001412</address>
<port system-property="tangosol.coherence.proxy.port">4131</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
========================================================================
if I do a CacheFactory::getCache("c1-Test"), the log shows a connection to the 1st cluster
if I then do a CacheFactory::getCache("c2-Test"), the log shows a connection to the 1st cluster and not to the second cluster
What did I do wrong?

I just bought a new iMac and now I am trying to use it as a screen for my Macbook pro, but it don't have a Mini DisplayPort the new model only have Thunderbolt which my Macbook don't have. Is there any way to connect this two mac's anyway??

I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??

Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables.

Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

Yes, that is possible. Please check out the following Apple Support article for details on how.

Connecting to two networks at the same time

Hi Kadin,
I am looking for the same answer for a long time. I have two situations that requires to connect to two different metworks and that is when I travel with my portable Linksys router WRT54GC .
1. I stay at a hotel with a wireless Internet network connection and I try to use the network to access the Internet and then (2) I also need to access my external Maxtor harddrive to which I am connected through my portable router WRT54GC .
2. I have an almost identical situation but instead of the hotel network now I have a brand new T-Mobil cell phone made by ITC, which is called Wings and it uses a new way to connect my laptop to the Internet by using a Windows Mobile 6 Internet-share connection, which basically connects my laptop to the T-Mobile network and assigns it a IP address.
The problem that I have is that in both cases I can connect to each one of the networks separately but not simultaneously.
Any advise as to how this can be done. I also tried the Wireless WET54G as a bridge with similar negative results.
Thanks,
Pole

Ok not real clear on your setup, but here is the "networking answer" why you can not connect to two networks.
A device must have an IP address on the same subnet of the device you want to establish a connection or an IP route must be known to the network routers, since your internal address are most likely in the reserved private range, no internet router is not going to know how to deliver the packets to the correct hosts.
the simple answer is assign a secondary IP address to the network adapter on your laptop.
In the windows IP address properties for secondary address you can not set a default gateway. Windows only has 1 default gateway.
good luck
jwm

Problem on connect to two servers with SSL

Hey all!
I've got a problem with connecting to two different servers via SSL in one Application. Every Connection works fine on its one via SSL.
But if i try to initialize a new connection it fails every time.
My thought is that the problem is the DriverManager. I'm not quite sure how this DriverManager works, but what i know is that it's a single-ton Class and with that maybe stores some parameters from the first connection which didn't get reloaded when trying to make a new connection.
Here's the way i create the connection ..
    String host="best.host.ever";
    int port="3306";
    String MYSQL_URL="jdbc:mysql://"+this.host+":"+this.port+"/";
    DBName="db_foobar";
    sqlProps = new Properties();
    sqlProps.setProperty("user","foo");
    sqlProps.setProperty("password","bar");
    sqlProps.setProperty("zeroDateTimeBehavior","convertToNull");
    sqlProps.setProperty("useSSL","true");
    System.setProperty("javax.net.ssl.trustStore", trustStore);
    System.setProperty("javax.net.ssl.trustStorePassword", "trustpass");
    System.setProperty("javax.net.ssl.keyStore", keyStore);
    System.setProperty("javax.net.ssl.keyStorePassword", "keypass");
    System.setProperty("javax.net.debug","ssl");
    printDebug("[Konstruktor] : Connecting to "+MYSQL_URL);
    try {
         Class.forName("org.gjt.mm.mysql.Driver").newInstance();
         this.conn = DriverManager.getConnection(MYSQL_URL+DBName,sqlProps);
        connectionCount++;
        initOK=true;
    //Catch stuff following...Is it possible that the System.properties i'm setting are only readed one time by the DriverManager (if it's readed by the DriverManager at all)?
So when i initialize a new Object with different System.properties they may not get used again.
Hopefully somebody has an explanation or a solution for this.
Besides: If i launch the programm twice it's no problem to have to differen SSL connections at the same time.
Thanks for reading and in advance for trying to help!

Yep, it's the standard authentication failure message. (The error code is 1045).
The Exception which is thrown is a SQLException with the message:
Access denied for user 'username'@'p54BB743D.dip.t-dialin.net' (using password: YES)
errorcode: 1045
The code i'm using runs well with one connection and even with multiple connections as long as not more than one connection are using SSL.
To explain:
The user has the possibility to run the application with a user defined data-source (the connection). You can add a new connection and the application will then add a tabbed pane with the same gui but uses the other data source then.
This runs fine with multiple connections (I managed to work on 3 differen intranet servers and 2 different servers online, one of them using SSL)
So all together 5 Connections. Now i wanted to add a 6th server with SSL two and thats the point where it crashes. (Both SSL Servers run perfect on their own with my application - only both together doesnt work).
About that: Class.forName, yes i'm using it every time when i make a new Connection. This is wrong? Could you explain why?
Anyway thanks for your answers so far!
Message was edited by:
Hotkey_ger

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

Much depends on the available connectivity of your television.
If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have.

Network Two Printer in Different Rooms

I currently have a airport extreme with a shared printer connected to it. My my two printers can print to this shared printer like it is supposed to. I would like to add another shared printer, however I want it in a different room than where my airport extreme is located. I was thinking of buying an airport express and incorporating it into the network with the other printer connected to it. That way it would be shared. Seems to work logically.
Does anyone have a working setup like I describe it above? One (1) airport extreme as the base, one (1) airport express as the network expander and two (2) shared printers (one on each airport).

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

COnnecting to two different powered speakers in two different rooms???

Similar Messages

Maybe you are looking for