Connecting to WiFi networks using EAP
I have scoured Google and many forums for specific information about being able to connect to wireless networks requiring EAP or PEAP using the itouch. I guess simply put, does the itouch support connection to a EAP secured network, such as the one at both my office and my college campus? If it does support EAP, how do I input my username and password information? My office network is not setup to broadcast the SSID so I have to go to Settings->Wi-Fi->Other... and start there. The security is set up with WEP but a password is not required, how is this handled from the "Other..." screen? Thanks for any advice.
I see, so i suppose for right now, the iTouch has no PEAP support.
BTW, you said you updated the IPT, does that mean there is a way to update the firmware?
Similar Messages
-
I have lost my iPod touch however it was not connected to wifi network , how do i find it . A reply would be very appreciated
you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
IPod Touch will not connect to WiFi network
Hi,
I am getting errors connecting to WiFi networks with my iPod Touch. This had affected a Touch I got a couple months ago. Initially, the WiFi worked perfectly on my WEP network and several others. Then, one day, I couldn't get any WiFi. After standard troubleshooting steps (forget network & re-enter, reset network settings, restart, restore iPod, etc.), it still wouldn't work. I returned the iPod and bought another. At first it also worked perfectly on any WiFi network I joined.
But now I'm affected by the same issue. This time, I went to the router settings and saw that the router (a Linksys) had assigned the iPod Touch an IP address. Yet, in the settings pane on th iPod Touch, the iPod had no IP address. I just ahead and reset all network settings, forget the network, reset the update and still nothing. And this was recently after updating to 1.1.2 firmware.
Given that this has now happened to iPod Touches, I'm concerned that it may be an issue that is affecting others. Any suggestions? The error I get in Safari is "Safari can't open the page because it can't find the server."same problem!it connects to the linksys(not always,but miracles happen),and it can't load any page. it's really anoyingi. actually remember that the first day i bought it could've connect to linksys,but then my dad just helped me to acces our network and i didn'try to use it. but when i was in neighbourhood and wanted to open safari, it found me a link sys,but couldn't load anything. like nothing,even thou the signal was pretty strong...and i tried to do something like this in different places and buildings,the only place where i could actually connect is home with my network,that's it!
i don't want to return my ipod,but it really drives me to it..=/
is there anything that i can do?
tnks. -
My MacBook Air is running very slowly and has difficulty staying connected to wifi networks.
Problem description:
My mac is running very slowly and I have difficulty staying connected to wifi networks. I have only used half of my hard drive. My computer was purchased in Canada, where I used it for over a year but now I am living in the US.
EtreCheck version: 2.1.5 (108)
Report generated January 11, 2015 at 5:56:14 PM MST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2011) (Verified)
MacBook Air - model: MacBookAir4,2
1 1.7 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:31:38
Disk Information: ℹ️
APPLE SSD SM128C disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 120.10 GB (59.92 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Splashtop Streamer.app
[not loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Support]
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
[not loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.splashtop.streamer-for-root.plist [Support]
[loaded] com.splashtop.streamer-for-user.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.leapfrog.connect.authdaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.splashtop.streamer-daemon.plist [Support]
[loaded] com.splashtop.streamer-srioframebuffer.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.leapfrog.connect.monitor.plist [Support]
[loaded] com.splashtop.streamer-for-user.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AirDisplayStatusItem Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
Dropbox Application (/Applications/Dropbox.app)
ScreenCapture Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
WDQuickView Application (/Incompatible Software/WDQuickView.app)
Internet Plug-ins: ℹ️
NPDjVu: Version: 6.1.1 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 5.2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
PrintDialogExt: Version: 6.1.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DirectorShockwave: Version: 11.0.3r470 [Support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
3rd Party Preference Panes: ℹ️
Air Display Preferences [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
0% fontd
0% Dropbox
0% Google Drive
0% AppleSpell
Top Processes by Memory: ℹ️
236 MB Safari
150 MB com.apple.WebKit.WebContent
90 MB Google Drive
82 MB Dropbox
69 MB mds_stores
Virtual Memory Information: ℹ️
486 MB Free RAM
1.62 GB Active RAM
1.15 GB Inactive RAM
1.04 GB Wired RAM
1.85 GB Page-ins
41 KB Page-outs
Diagnostics Information: ℹ️
Jan 11, 2015, 05:30:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AirDisplayStatusItem_2015-01-1 1-173050_[redacted].crash
Jan 11, 2015, 05:25:11 PM Self test - passedThanks!
Here is the results from running EtreCheck while in safe mode. (I hope I understood your directions correctly to do just that).
EtreCheck version: 2.1.6 (109)
Report generated January 20, 2015 at 8:41:33 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2011) (Technical Specifications)
MacBook Air - model: MacBookAir4,2
1 1.7 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 377
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:4:59
Disk Information: ℹ️
APPLE SSD SM128C disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 120.10 GB (59.56 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[not loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) [Support]
[not loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) [Support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist [Details]
[failed] com.apple.watchdogd.plist [Details]
Launch Agents: ℹ️
[not loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.splashtop.streamer-for-root.plist [Support]
[not loaded] com.splashtop.streamer-for-user.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.google.keystone.daemon.plist [Support]
[not loaded] com.leapfrog.connect.authdaemon.plist [Support]
[not loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.splashtop.streamer-daemon.plist [Support]
[not loaded] com.splashtop.streamer-srioframebuffer.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Support]
[not loaded] com.leapfrog.connect.monitor.plist [Support]
[not loaded] com.splashtop.streamer-for-user.plist [Support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AirDisplayStatusItem Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/AirDisplayStatusItem.app)
Dropbox Application (/Applications/Dropbox.app)
ScreenCapture Application (/Library/PreferencePanes/Air Display Preferences.prefPane/Contents/Resources/ScreenCapture.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
WDQuickView Application (/Incompatible Software/WDQuickView.app)
Internet Plug-ins: ℹ️
NPDjVu: Version: 6.1.1 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 5.2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.5.4 [Support]
PrintDialogExt: Version: 6.1.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DirectorShockwave: Version: 11.0.3r470 [Support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
3rd Party Preference Panes: ℹ️
Air Display Preferences [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
0% AppleSpell
0% notifyd
0% fontd
0% opendirectoryd
Top Processes by Memory: ℹ️
241 MB Safari
168 MB Finder
129 MB com.apple.WebKit.WebContent
103 MB WindowServer
77 MB CalendarAgent
Virtual Memory Information: ℹ️
139 MB Free RAM
1.85 GB Active RAM
1.75 GB Inactive RAM
537 MB Wired RAM
810 MB Page-ins
164 KB Page-outs
Diagnostics Information: ℹ️
Jan 20, 2015, 08:37:12 PM Self test - passed -
Connecting to wifi network - Measure connection time
Hi
I'm connecting to WiFi network. How can I measure the connection time? I mean, I need to get the time the connection takes.
I tried to use the following events (Of WMI):
MSNdis_StatusDot11AssociationStart
MSNdis_StatusDot11AssociationCompletion
But the second event didn't work. I mean, I get the info when the connection started but didn't get any info when the connection completed.
Can you please help?
Regards,
Nadeem BaderHi Nadeem,
I‘m writing to check if the suggestions were helpful, if you have any questions, please feel free to let me know.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain. What can I do so that I can connect other devices to my Wifi?
Read the router's user manual on how to change your password.
If you are going to select another password, make sure it's one that you will NEVER forget AND no one else can figure it out. Print it out & keep in a safe place. A place that ONLY you know about AND never forget. -
Hello,
I have an iPhone 4S. I have been having issues with my wifi. It works for several months, but one day for no reason I have been able to determine, the wifi stopped working. It has been many weeks since it has worked. I have tried several networks (home, work, relative's houses, etc...)
After visiting the Apple Genius Bar, I was told it was probably a software issue the wifi worked fine in the apple store on a unprotected network which showed that the wifi was able to function. It was recommended that I backup and then to a full reset to factory settings.
I did the backup and reset. It has had no effect on my ability to use internet to secured networks.
I also updated the iOS to the most recent update ( 6.0.1) to see if that would help, but it didn't.
To summarize:
-iPhone connects to wifi networks
-Unable to use internet (or other data functions) while connected to a password protected wifi...but able to do so on unprotected networks.
-Already tried resetting network settings.
-Already tried resetting to factory settings.
-Already tried updating iOS.
ThanksMight be a wifi router issue. Try power cycling the router and/or updating it's firmware. You might also try temporarily removing any security features until you get it sorted out. If still an issue, it might be wifi on the iPhone itself... there have been many reports of wifi problems with iOS6. Have you restored as new, i.e. without your backup? You could also Google for ways to downgrade back to iOS5.
Regarding the Chipotle issue, go for the bowl instead of the burrito. -
Can't connect to wifi network after iOS update
Can't connect to wifi network after iOS update.
This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again. -
HP Officejet 6700 Premium cannot connect to wifi network
Since a few days, our HP Officejet 6700 Premium can no longer connect to wifi network. All our other devices as laptops, smartphones, tablets have no difficulty in connecting to the wifi. reconnecting and entering the WPA password doesn't help.
The printer says the SSID of our wifi network is not unique, it detects multiple access points.
What can I do to solve this issue.
TxHello there @karatejan
Welcome to the HP Forums!
I read about the issues you're facing when trying to connect your Officejet 6700 printer to your network recently. I have three suggestions for you, and please let me know the results when you are done.
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer, and run the set up again.
If you are running a Windows OS, from your PC, perform a Clean Boot, which will turn off the start up programs just in case there is something blocking the installation. Try the USB to wireless set up again.
Check your router settings to match these recommended settings:
1. Network name and password to have no spaces or punctuation.
2. If using WPA2 security, switch to WPA personal.
3. Dual broadcast Wireless b/g/n (printer may only connect to g).
4. Mac filter needs to be turned off.
5. Firewall settings need to be at there default settings, or set to a lower security.
6. Multicasting "on".
7. Following ports need to be un-blocked:
Incoming (UDP) ports : 137, 138, 161, 427
Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
How can I set up a guest WiFi network using Time Capsule and Airport Express extension?
How can I set up a guest WiFi network using Time Capsule and Airport Express extension?
Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.
-
My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.
One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having -
Can't connect to WiFi networks via tray icon, manually adding works fine
I've searched for about a day for anyone having a similar issue and have come up with nothing so far. I have an older HP laptop with Windows 7 32 bit that is having issues with connecting to WiFi networks. It will find all available wireless
networks just fine, and when I select mine, it comes up with the prompt to enter my password, however when I hit OK to connect, the prompt disappears and nothing happens or responds afterwards. A few things that I've tried in order to troubleshoot and
narrow down the problem:
-I've tried connecting to two different wireless networks; one with WPA2 encryption and one with no encryption, both have the same issue (obviously the non-encrypted wireless network doesn't prompt for a password, but once I hit connect all prompts disappear
and acts as if I did nothing).
-I've added the WPA2 encrypted network manually to my list of wireless networks, and once I do this it connects just fine. When removed, it disconnects and the issue happens again (this confirms that the wireless password I'm entering is correct and
that there are no issues with the wireless network itself, as well as other devices working flawlessly on the same wireless network).
-I've disabled all firewalls and antivirus through this whole process, did not make a difference.
-I've reset winsock which didn't make a difference.
-I've run a virus scan, no viruses on the laptop.
I've run out of ideas as to what would prevent being able to connect to a wireless network through the normal process of finding nearby access points, putting in your password, and having it work. I understand that I could simply leave the wireless
network added manually, but this is not an option for when the laptop is taken elsewhere as having to add whatever wireless network I'm near manually is not something that should have to be done.I would recommend to update the driver for you wireless nic as a first step. Also, if installed, get rid of third party utilities that 'manage' your wireless network(s)
Also check if you can
clear out the remembered connections i've encountered issues before when a network with same ssid but different connection settings was stored by windows.
MCP/MCSA/MCTS/MCITP -
I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?
Hi troy157,
I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
If the issues persists, the article below will give you a few more troubleshooting steps:
iOS: Troubleshooting applications purchased from the App Store
Try the following steps to resolve your issue, testing the app after each step.
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
Ensure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your device
Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
I hope this information helps ....
Have a great day!
- Judy -
Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my Macbook Pro. I have turned off Bluetooth ( which was not an issue previously), uninstalled Chrome, again not an issue before I upgraded, and have not seen any improvement.
I was using an older OS system (Snow Leopard) on my 2010 Macbook Pro. I am wondering now if the upgrade was an unwise move?jbuckworth,
which apps do you run under battery power? Are any of them identified as “apps using significant energy” when you click on the battery icon in the menu bar? If you have a 15-inch or 17-inch model, are your apps using the discrete GPU (which consumes more power than the integrated GPU)?
How many charge cycles has your battery accumulated?
How long have you had Mavericks installed? Is Spotlight still reïndexing your boot drive? (It does that whenever your OS is upgraded, because so many files change in an OS upgrade.) -
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
Maybe you are looking for
-
Hi, What are the settings required to create servcie purchase order automatically from PR. I case of standard process we have to flag auto Po in MMR and VMR. But in case of service PO ,what is the process. REgards, Venkat
-
[IPv6/WLC7.2] Could we use 2960s "LAN LITE" ?!?!
Dear Experts, Im doubt with following diagram, Topology designs CAPWAP Access Point to do Dual-Stack tunnel IPv6 in to IPv4 tunnel. And need WLC to be L2 directly adjacency to IPv6 enabled-Router. Questions are - Can I use existing L2 switches such 3
-
Important Hints on Color Management under Windows XP!!
After struggling for several hours, I have learned a couple important tidbits I have not seen elsewhere in these forums. As much confusion as I read in here about color management and color issues, this might be quite important to some. If you want t
-
Hello all, Can some one please help me in resolving the below mentioned issues? 1) I am trying to validate an prepayment invoice for an employee expense report and its going on system hold with name No Rate and reason as "Invoice is not in functional
-
At midnight tonight will best buy sell xbox one on their online store? Thank you Solved! Go to Solution.