Connecting to windows networks from a mac

I have a G5 with airport card installed which is connected via ethernet to an airport express, and there are several wireless networks provided by my school nearby which I am unable to connect to through either my card or the express. Meanwhile, my friend has a windows laptop (which I'm typing on now) that is able to access these networks correctly, and detects them automatically. Is there any way I can configure my G5 to connect to these? I've tried connecting to the networks in question manually (there's no password), but am unable to do so, as it gives me a generic error 'there was an error joining the Airport network "<network name>".' Is there a specific configuration issue that's preventing me from accessing the networks, or are they only accessable from Windows computers?

The cable connects my computer to my airport express, which I've used in the past to extend my range (especially at home). However, even with the cable disconnected and the express unplugged I am still unable to connect to the school network. Any other thoughts?

Similar Messages

Can I access work's windows network from home mac?

Can I use my Mac G4 running OS X Tiger to remote connect to my work pc running XP?

Theoretically, yes. However, this depends on how your firm has set up its network. For example, if they have implemented a VPN. You should contact your network administrator to discuss the issue. Some companies prohibit such access for security reasons.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Connecting to a pc from my mac via airport express wireless network

I have successfully been able to access my mac from my Windows XP machine via my AE wireless network that I set up with my Mac. However, I am unable to do the reverse. I.e. connect to my PC from my Mac.
There seem to be two issues I need to figure out to make this work:
1. Firstly, the option to allow sharing for any of my Windows folders has been restricted because apparently I need to create a network first but I have a network and both the PC and Mac can access the internet, share a printer and see each other via this network so I don't understand what's wrong. Do I have to create a network from the pc side of things as well in order for this to work?
2. When I attempt to connect to the pc from my mac I do the following from Finder: GO >> "Connect to Server" then I type in smb://<ip address of the pc>. When the dialogue comes up asking for "Workgroup/Domain", "Name" and "Password" comes up I know I have the correct workgroup and I know the pc is there because it's full name is displayed but I'm not sure what to enter as "Name" and "Password". I assumed it was the username and password for the windows user on the pc whose files/folders I want to access but then I'm told the connection can't be made because the name or password isn't correct. I tried every user name and password I could think of in these fields--even the accounts for my mac--but they all give me the same response.
I'd appreciate it if someone could someone lend a hand.
Joey

Sorry, I don't know which articles you have already reviewed.
Sharing folders on the PC should be nothing more than enabling "File and Printer Sharing for Microsoft Networks" option under Network options & then identifying which folders you want to share.
Other references to try:
- http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1164.html
- http://docs.info.apple.com/article.html?artnum=106471
- http://docs.info.apple.com/article.html?artnum=19652

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

Connecting to Windows computer from Mac

So here is my issue:
I can connect to my Mac from my PC, but not the other way around.
Both of my machines have internet, and my mac is on a wireless connection.
I want to know how I can access the files from my Windows machine from my Mac.
This is what ive tried so far, and every time I enter in the address it tells me I have entered in a wrong user name or password when I have not had the change to enter anything in!
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1164.html
Am I dealing with an OS X problem here or am I dealing with an XP problem? Wherever the issue is coming from, is it fixable?

Might be both... OSX will/can send past passwords & such before asking, but this site should fix you up. Also might need to ensure they are both the same Workgroup.
Is that smb://+ the IP you're entering?
iFelix...
http://www.ifelix.co.uk/tech/3020.html

Cannot connect to the internet from my MAC on WRT160Nv2 - no problems connecting from my PC

Hi,
I have just bought a WRT160Nv2, but I am having problems connecting to the internet from my MAC (a powerbook with OS X) when I connect to the router wirelessly. If I try from my PC the Internet works fine. Also if I connect the MAC directly to the routers LAN port, the Internet works.
When I connect wirelessly from the MAC I do get an IP adress, and I am able to access the routers web configuration page. I can also see that the correct DNS gets assigned, so I am low on suggestions to what could be the problem.
Currently I have the router set up to WPA2 encryption, but I have tried different settings, e.g. no security at all with the same result.
I just tried upgrading to the newest firmware (WRT160Nv2_v2.0.02_008), also with no luck.
Also I should mention that the MAC can connect to other wireless connections without problems, e.g. my previous ZyXel DSL router.
Any ideas to what could be the problem?
Thanks,
Rasmus

Well maybe WPA2 Security is not compatible with Mac so change the Security mode to WEP or WPA and prepare security key of 10 digit password and while connecting to the wireless network on Mac type a $ sign first followed by the 10 digit passoword and it should work.

Unable to change screen quality when accessing Window machine FROM my Mac

Hi there,
I've been playing around with a copy of Apple Remote Desktop 3.1 and I'm very happy with the results when connecting to a Mac Server from my MacBook. We have quite a slow line so I use the sceen adjuster on the top-right corner of the screen to make the remote screen black & white to speed up the connection. I have another server here which is Windows server running RealVNC. When I connect to that machine and try changing the screen quality to black & white, it does nothing Can anyone change the screen quality when connect to a Windows machine from a Mac running Remote Desktop? If so, could you tell me your setup please?
Martin BG
Life as an Apple Switcher - http://aurora7795.blogspot.com

Go to System Preferences-->Display. Choose the biggest dimension there. The screen will turn blue and your display will change.

Can't access a Windows PC from my Mac

Hi ,
I'm having real problems connecting to my PC from my Mac.
I'm using a wireless router, both the pc and my macbook are connected wirelessly to the the router. From the PC I can ping the pc, the router, external web addresses, and the mac. From the mac I can ping the mac, the router, external web addresses but not the pc.
What's really strange is that I can connect to the mac from the pc, transfer files from the pc to the mac, and transfer files from the mac to the pc. However I still can't connect or ping the pc.
I've tried enabling sharing on the pc, I've got the same "workgroup" for the pc and the mac.
I've now run out of ideas, does anyone else have any that might help ?
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)

Hi iFelix,
Does the PC have an account with a username and a
password.
yes the pc does have an account with username and password, and for consistency I made them the same as the mac username and password.
I'm still not sure why I can't even ping the pc though ?
I followed your tutorial through, that's when I managed to get the pc to access the mac and transfer files, unfortunately I stll can't see the pc though (Very good tutorial too).
Thanks

I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

Yes, I've that and it didn't work. Today, I reinstalled printer software on one printer and the "paused" message changed to "offline". It's a three-in-one printer. I turned off and on again and it still says "offline"
"

Cannot connect to wireless network from a new HP Officejet Pro 6830

Just purchased a HP Officejet Pro 6830 wireless printer.
Set it up connecting my Dell PC and it initially worked.
THEN something happened.
ICON on screen on printer indicates "NO WIRELESS NETWORK FOUND"
Tried rebooting the Cable modem, then the router, then the printer and then the PC.
Still did not work.
What should I do?
Thank you for any help.

Hi @I-Love-HP-Gear,
Welcome to the HP Forums!
I noticed that you cannot connect to the wireless network from a new HP Officejet pro 6830, I am sorry to hear this, but I am happy to help you with your connection issues!
Are you able to make copies with the printer? Copy Text or Mixed Documents.
What Operating System are you using? Windows or Mac? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, please see the following:
This general printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue.
This wireless guide for maintaining the connection. Printer Does Not Maintain Wireless Connection.
The HP Wireless Printing Center for more information. HP Wireless Printing Center.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to connect to windows network

Is there a way to connect your iPad and/or iPhone 5 to a Windows network? If so how?

Hi, Charlie -
I'm not insulted at all! I appreciate the dialog.
Here's what I can tell you. I checked the airport utility and it indicates specifically that the Airport Express is being used to "Extend a wireless network." It's not connected to the Airport Extreme by any cable.
Given the difference in indicated signal strength on my MacBook Air (I'm using it now and it's 3 feet away from the Mac Pro), I've got full strength on the Air but when I try to connect the Windows machine it indicates only 1 bar/unit of strength. I'm guessing that it's not seeing the Express (extended) but only the Extreme that's much farther away. I'm in the basement at one end of the house and the Extreme is on the second floor at the other end of the house. When I boot the Mac Pro to OS X I'm able to join the extended network. Hmmmmm...
Rob

Can't connect to Windows network (ethernet)

im trying to connect my macbook to existing, enterprise Windows network. im not at all concerned w/ sharing files on my mac... but i would like to be able to:
1) use the (ethernet-based) Windows network for internet (its DHCP-based)
2) use the Windows network's printers
3) access Windows network shared folders
...having trouble.
currently, im plugged in via ethernet (good cable) and "Connected".
however, when selecting "Using DHCP" it says:
"Ethernet has a self-assigned IP address and may not be able to
connect."
...my Windows co-workers use DHCP, but their addresses are in the
10.5.2.x range; whereas mine is a 169.x.x.x address. somebody told me that:
+"This is an address used to request an address from the DHCP (Dynamic+
+Host Configuration Protocol) server for your network. Seeing this+
+means for whatever reason you are not getting assigned an address+
+by that server. The first thing I'd try is asking your network+
+administrator about it. It could be the network access is restricted."+
...ive checked, and we are not restricted; our admin thought i should be able to get an IP address.
any ideas?
thanks,
sm

If you are not getting an address via DHCP, and your mac is set up to accept DHCP on the Ethernet network line, then you are probably not physically connected to the network. Tell your admin to help you get a connection to his network.
Second, to access a Windows Active Directory domain, have your admin use the Directory Utility located in the Utilities area of Finder (this is in Leopard, not sure about earlier versions) have him bind you to his Active Directory domain. The domain name is his AD domain name, and the computer name is what he and you want to name your computer. The reason he/she has to do it is because you need a Windows/AD admin user ID and password to do it, just like you were doing this to any Windows machine.
This makes accessing Windows objects easier. Alas, Windows printing via AD seems to have been broken with the 2008-002 security update, but I have to think this will be addressed.

Sporadic problems connecting to Windows Network

I'm one of two Mac persons on a Windows network here at work. The problem is that we often can't connect to the server/network. It's a Windows 2003 Server, and we're both running on Tiger.
What puzzles me is that we sometimes can log on to the network, and sometimes not.
Is there any explanation (or preferably a solution).
Thanks in advance!
Message was edited by: Snuf

IT should know this from their Logs, but if you have access to the Server, check it's time & the Macs' times when you can't connect.
For the other problem, might try to use one of these lines in terminal...
sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
sudo ifconfig en0 down;sudo ifconfig en0 up
Use en0 if Ethernet, en1 if Airport, in both places in either line.

I can see my windows network, but my Mac Air can't

I recently set up my iMac to use the printer attached to my Windows-networked PC. I couldn't even do that until I set my Windows network as a Workgroup, but when I did, the iMac immediately saw it and I was able to connect the connected printer. I was hopeful that I could do the same with my wife's and my Mac Airs, but such was not the case. Neither Mac Air can see the Windows Workgroup (from the same geophysical location as the iMac). What else need I do to enable the Mac Airs to see the network?
Thanks,
Tom

Fred,
I don't even know what a subnet is! All the referenced computers are connected wirelessly. The only hardwire connection is between the Windows PC and the printer. I'll confirm this later, but I am pretty sure it is entirely accurate.
Thanks for any assistance,
Tom

Connecting to windows networks from a mac

Similar Messages

Maybe you are looking for