Connecting to windows PC

I was in the process of restoring my used 20gb ipod when it it seemed like my computer froze. Now, I both my ipod won't recognize the USB cable (brand new) and the computer won't recognize ipod. I don't know whether it is charging because it seems the ipod won't recognize the USB cable.
How can I get ipod to recognize USB cable and computer to recognize ipod so that I can complete restore process.

I'm pretty new at Macs (I bought an iMac G3 for $40
recently.), and I was trying to connect my Windows
printer (Canon i900D) to my Mac, but my Mac cannot
connect to the PC or printer at all! The Mac can
recognize the PC. The PC can read the Mac's files,
but not vice versa.
The PC is a Windows XP Pro SP1.
I can connect to another PC though, a Windows XP Home
SP2, and reach it's files and printers.
That would suggest to me that it is a setting in your XP SP1 pc.
Firewall off, printer shared, etc ?
Can you connect to the printer from your other windows pc ?

Similar Messages

How can I use my airport extreme to connect a windows machine to the internet? I don't have the software disks anymore...

I no longer have any disks for my airport extreme (its pre-time capsule)... how can I connect my windows machine to it in order to get to the internet?

You can directly download the AirPort Utility for Windows from Apple Support here.
Once the AirPort Extreme is properly configured for Internet access you can connect your PC to the Extreme either by a wired or wireless connection.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

I had the same problem when i dl-ed a new anti-virus softward, but what I did help me reconnect Firefox again!
Here is what I did,
Go to open firefox browser-->option-->advanced-->network-->settings-->and change it to auto-detect proxy settings for this network!
It worked for you, hope it will work for you too =)!
Cheers

How can I display modes in connection create window

Hi Pro,
I create a environment/model, then I get into EPM excel addin, try to create a connection, but eventhough I choose my environment created, but I get blank list for model drop down list. how can I display modes in connection create window?

Hi Yi Fei,
Add user to your environment, check their security profiles, also check roles in BW.
Andy

Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

Remote desktop connection in windows 7 pro

I have a problem accessing remote desktop connection using windows 7 64 bit.
My remote desktop connection shell version 6.3.9600 shows the Network Level Authentication is not supported.
My other computer also win 7 pro 64 bit has a different shell version 6.2.9200 that supports Network Level Authentication.
How do I go backwards to shell 6.2.9200?
I have been trying use remote desktop using the more robust security and could not figure out why I could not log.
I have screen shots of the two shells and my system screens

Hi,
Configure Network Level Authentication
Click Start, click Run, type regedit, and then press ENTER.
In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
In the details pane, right-click Security Packages, and then click Modify.
In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK.
In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
In the details pane, right-click SecurityProviders, and then click Modify.
In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK.
Exit Registry Editor.
Restart the computer.
Hope this helps!
Andy Altmann
TechNet Community Support

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Problem Connecting a Windows Computer to Our Domain

I'm trying to connect a windows XP pro computer to a domain. There is an OD replica on the same subnet set as a Backup Domain Controller. The OD master is on a different subnet, it is set as a Primary Domain Controller.
The error I'm getting is:
The following error occurred attempting to join the domain "DN":
The Specified domain either does not exist or could not be contacted.
If I turn the backup domain controller off the error pops up as soon as I try to join the domain. If the backup domain controller is running a login prompt pops up I enter the username and password and the error pops up after about 15 seconds.
I've attempted to verify settings using: http://www.shellharbourd.det.nsw.edu.au/pdf/osxserver/080_win_osxdmn.pdf and everything looks correct.

The Apple store will do this for you.
You can call Apple support and they will help you do it.
You can type "move itunes library from pc to mac" into the google search bar.

TS1538 i need help because i need help getting my ipod touch to connect to windows vista and

i need help getting my ipod touch to connect to windows because it keeps saying udb device not recognized and i tr\]ied restarting the settings!!!!!

Have you tried here:
iOS: Device not recognized in iTunes for Windows

Apple tv can no longer connect to Windows PC home computer

Apple TV could no longer connect to Windows 7 PC home computer.
This happened after several Windows updates and Mcafee updates.
After reviewing the web for people with the same problem, I found that you can get your Apple TV back the way it was by:
1. Remove Mcafee and install Microsoft Security Essentials (free from the Microsoft website), then
2. Start the Windows Firewall from the Control Panel, then
3. Click on the left pane click on "Allow a program or feature through the Windows firewall", then on the new window
4. Click "Change Settings", click Yes to the pop up window, and
5. Select both Bonjour Services one at a time, and check the box that says "Home/Work(private)" network. Click OK at the bottom and you are done!
I was thrilled when I got my Apple TV back to normal.
Good luck.

mcafee is a horrible piece of software along with norton the only reason they have tons of users is because they pay pc makers to preinstall it and most nonTech users just pay up after the 30days of free virus scanning

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean. When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error message when connecting to Windows

I have a newer Ipod, 4g, that Im trying to connect to Windows. I d/l the latest version of Itunes and installed but when I connect the Ipod, it says it has detected an Ipod in recovery mode and I will need to restore etc. I first did the restore and update as it said. It gave a message that it was successful but then the error message came back up. I looked online and it suggested I reset the Ipod itself, which I did but the message still comes up. Is there any fix to this or does it need to be sent in? The unit is just about new, no songs on it yet. It belongs to a friend of my daughter who asked me to put some songs on it for her.

I have the same problems. Also I sent my ipod to repair but nobody find anything. The only possibility to snyc is: Switching off pc, connect ipod with pc, starting pc and itunes and now I can sync. But after a while itunes comes up with the same error massage (recovery mode). I think some service from itunes or ipod does not start correct, but I do not know which one.
Has anybody an idea?

Ipod nano does not connect to Windows and itunes

Dear All
in my family we have 3 ipods: a shuffle, a ipod 20gb and a nano. While the first 2 are easily connecting to windows and itunes, the nano doesn't and does not recognise the USB port of my laptop[message 'unkwnon device']. I have tried, I think, most of the suggestion I found on the apple support and in the forum. Does somebody know any 'special' tip, my son is really getting frustrated by this situation because he can't get the same music. Please help. Thanks in advance
ciao

Hello franbat,
Thank you for the details of the issue you are experiencing with your son's iPod nano. I found an article with steps to address this:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

IPhone 4S not connecting to Windows XP Pro

My iPhone 4S is not connecting to Windows XP Pro. I've already tried restarting my Apple USB Driver but it still will not connect. Any suggestions?

After plugging it into my computer for roughly the 173rd time in the space of 6 hours it randomly opened itunes installed 3 drivers and started working.
For future reference, what in gods name just happened?

Connecting to windows PC

Similar Messages

Maybe you are looking for