Connecting to Windows Workgroup via Kerberos

How do i connect to windows workgroups using kerberos authentication?

in the finder select "Go" then "Connect to server" and enter "smb://servername/sharename"
kerberos is an authentication scheme, not a protocol. In order for it to work (when it's not broken), you need to be logged in with kerberos credentials.

Similar Messages

I can't connect to Windows Server via FTP

I've been using FTP for about 13 years and it works fine on Apache servers but can't connect to a windows Server via my Fetch FTP program. The site owner sent me a screenshot and copied/pasted the password so I know I have the info correct. It is still giving me errors.
Is there a special method to connect to Windows server via FTP?

Hi Lorel,
Try FileZilla...
https://filezilla-project.org/

Lost connection to Windows workgroup

I cannot figure this out. I have had Macs & PC's networking fine for years, but the following just happened to me with a month old MacMini.
The MacMini is running Snow Leopard. It has been able to network with a Windows workgroup and access all the computers & connected printers. As of yesterday, none of these computers show up in Finder under Shared or Network. I used to always see the Windows workgroup under Network, but now it does not appear.
I have tried everything that I can think of, but cannot find where this is going wrong. I am able to access the MacMini from the Windows machines (one running XP and the other running W7), but not he other direction.
I am able to connect to the Windows machines by using Finder>Go>smb:// method, but this doesn't get me to the printer.
After years of effortless shared printing, I'm at a loss.

See if this web site can be of help:
http://www.ifelix.co.uk/tech/

Palm Pro won't connect to Windows XP via USB

I can't get my Palm Pro to connect to windows XP. When I connect it, via the USB connection, it prompts that it has found new hardware, however the ActiveSync portion fails and nothing happens. I've uninstalled & installed the software twice and even dug into the registery to make sure it was completely cleaned out. Futhermore, it connects to my laptop at home no problems. Firewall is disabled.
Thoughts?
Post relates to: Treo Pro T850 (Sprint)

In device manager you do not see any listing for the Palm or Windows Mobile device, but you see the DM jump or blink. When you connect the USB cable, do you get a beep-beep low then high, or a triple gong sound. The triple gong sound would indicate that the connection is established, but the device is not recognized. You may have a driver issue that require a clean uninstall / reinstall. I am guessing that you did try another USB port. Here are the steps for the clean uninstall / reinstall:
Full uninstall of PD on XP:
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

Connecting to windows workgroup wifi

I am trying to print from my iMac G5 through a windows workgroup wifi network at home using an HP printer but no success

Do you know if you have the correct print driver for the HP printer on you iMac? Get the model number for the printer and go to the HP website and download the current driver for that printer (for non-intel-based Macs).
Maybe that will help.
Good luck.

Connecting to Windows Computer via wireless network (Password issue)

I have a wireless network set up at my house, and we all can see each other's shared computers, and the windows machines can connect to each other without a problem.. but my Mac cannot connect to them, but they can connect to me. When I goto "Connect to Server" it asks me for a username and password for the windows machine.. I don't know what to do from here!!! Please help, thanks a bunch

In your Sharing panel, did you go into "Options" and check the box for sharing via SMB?
Then from XP you should be able to reach the Mac via //(ip# or DNS name)/
and you should see the available shares.

Can't connect to windows xp via server name

I have a network via Airport Express: imac 10.6.8 and PC windows XP sp3
Suddenly, without any reason, I got this issue:
I can't see the PC in on left share bar of Finder windows.
The only way to see the PC is : go > connect to server" > server address = smb://ip address BUT doesn't work if I use the computer name instead of the ip address( i.e ".smb://ip-address" works fine BUT "smb://computer-name" doens't work : message "connection failed")
Sometimes , very rerely, the XP computer name appears on the share bar but again, if I try to connect I get "connection failed " message.
It seems that iMac is not able to translate the logical computer name with the ip address.
Due to this issue , I have a trouble to use the shared windows printer because I have to install (on the mac) the windows printer using the ip address of the PC but if the IP address changes (I use DHCP and sometimes I have other computers on the network so the IP addres may change) I have to install again the printer with the new IP address.
Can someone help me?
Many thanks
Giuseppe

Same problem - can't see the Apple TV on iTunes to be able to connect despite changing the TCP address etc

Console connection to Windows Console via RDP

RDP 5.2 has the option of connecting to the console of a Windows Terminal Server. Is this also possible from SGD?
There is no option for the console connection for /opt/tarantella/bin/bin/ttatsc
SGD version is 4.2
Thanks in adavance,
Remold Krol

In the article you posted (http://support.microsoft.com/kb/278845/ )
I can read:
MORE INFORMATION
In Windows Server 2003, when you use Terminal Services, you can connect to the console session (session 0), and at the same time, open a shadow session to it (as long as you connect from a session other than the console). With this added functionality, you can log on to a Windows Server 2003-based server that is running Terminal Services remotely and interact with session 0 as if you were sitting at the physical console of the computer. This session can also be shadowed so that the remote user and the local user at the physical console can see and interact with the same session.
if I connect via the command mstsc -v:servername /F -console as you describe, in task manager I see my connection with id 0...

How connect to windows network via wifi?

i try to connect to my windows shared network via wifi,but it doesn't work.
here's the error message
please help me to solve this problem
thank you.

Check the settings on your iPad for automatic downloads.....
Settings>Store>Automatic Downloads>Apps. If it is enabled, turn it off. The apps shouldn't download again as far as I know, but this is a good a place as any to start.

58" Cloud TV...can no longer connect to Windows computer via MediaShare

Have a Dell all in one and 58" Toshiba Cloud TV. Love the TV, but have had nothing but trouble with the MediaShare function. Sometimes it finds the computer on my network, sometimes not. Now won't at all for the last week. Have tried rebooting computer, TV, and wireless router. No effect. Dell is running Windows 8.1 and has file sharing and network discovery turned on.

mcafee is a horrible piece of software along with norton the only reason they have tons of users is because they pay pc makers to preinstall it and most nonTech users just pay up after the 30days of free virus scanning

Windows authentication via kerberos on LDAP

question - where can I generate ktpass -princ host/ etc. it isn't at j2ee engine machine ( is it at SAP Web Dispatcher)??

Hi Damian
You need to run the command on the Domain Controller
Theo

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problems Connecting 2 New Macs to a Windows Workgroup

We have a Windows workgroup in our orphanage that has been working fine. The Windows XP computers use the IPs of 192.168.0.1 (the gateway computer that connects to the Internet), 192.168.0.10, 192.168.0.20, 192.168.0.80, 192.168.0.90 and 192.168.0.100
I have (attempted to) assign the IP addresses of 192.168.0.30 and 192.168.0.40 to the two new Macs I am wishing to add to our system. Eventually I want to go all Mac.
I am using the DNS of 202.102.224.68 and 202.102.227.68 on the workgroup.
All of the windows boxes except one are standard network with LAN cables. One is wireless. There are three wireless access points in the system and I am attempting to set up both Macs using Airport.
Prior to hooking up the two new Macs I have two Sony Viao Laptops that are able to connect to the network via any of the three wireless access points. All the computers and the laptops can connect to the Internet via the gateway computer at 192.168.0.1. File sharing works fine. Printer sharing works fine with any of the three printers we have in our workgroup. Remote access works fine also.
Now that I have included the two new Macs they can see each other but not the other computers in the workgroup. The PCs cannot see each other now... and.... the two Macs can connect to the internet via the Win XP gateway at 192.168.0.1 even though it does not show up in Finder.
I am terribly confused and I have tried to read every post in this thread but none seem to help.
I downloaded and installed "Workgroup Manager" but the first thing that happens when I attempt to run it is it asks me for "Address", "User Name" and "Password" in the connect window titled "Workgroup Manager Connect"
Of course I know my user name and password but I have no idea what it is looking for in the "Address" box.
I would sure like some help if anyone has the time.
What I want to achieve is simply add the two new Macs to the workgroup so all computers can have file sharing, remote access, Internet access and printer sharing.
Thank you in advance!
The Oowf
Message was edited by: oowf

I was told my post was in the wrong forum so I re-posted in the correct forum and want to delete this post but can't see how.
I would ask an admin to delete it for me..
I do apologize...
Thank You!

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Connecting to Windows Workgroup via Kerberos

Similar Messages

Maybe you are looking for