Connecting to Wireless Network at Hotel

I am staying at a Hampton Inn (Hilton hotel chain) and can't get my MacBook to work on the wireless network they have here.
The hotel instructions to access the wireless are:
1. Configure your wireless network card as needed. Make sure that data encryption (WEP) is disabled.
2. Select or enter SSID "hhonors".
3. Launch your web browser.
4. Enter the access code provided to you at the front desk and accept the terms of use to start browsing the internet.
Based on the instructions the hotel gave me, I turned on the computer and opened a browser window using Safari, but instead of bringing up a webpage to enter in an access code, I just got a message that I was not connected to the internet. I then opened a browser window using Firefox and got the same message. When I used the connection diagnostic, I go throught the steps, and it shows the hhonors wireless network, but when I choose, it asks for a WEP key. I even tried entering the access code as the WEP key, which, of course, didn't work.
I can see the hhonors wireless network when I click on the AirPort, but when I select it from there I get a message that says "The selected network uses an Access Control List to restrict access and this computer is not on the list".
The hotel has indicated they have not had anyone else having problems (and a couple folks in the lobby are on the same wireless system). I'm at this hotel for a number of days, and while they supplied me with a cable to connect through the ethernet port, I would really prefer to use the wireless (especially as the cable is very short and I am basically having to huddle in the corner on a chair). I know my AirPort works as I use wireless at home, and just left a friend's home where I used their wireless with no problem.
Do I need to manually change the settings on my AirPort, and if so, how should it be set up?
Thanks in advance for any assistance.

Hi CrysMM: I believe Craig in the previous response is correct. I have stayed at a Hilton recently and I believe I had to first select the wireless network as per Craig's instructions. Only then could I open a Web Browser an input the access code in a web page from Hilton. I hope that makes sense, if so Happy surfing.
Stedman

Similar Messages

  • Two Issues: Cannot connect to wireless networks; Cannot load certain sites

    Hey everybody,
    I have a MacBook Pro 15".
    In just the past week, I've stumbled upon two sudden problems with my network/internet connectivity.
    First, I can no longer connect to wireless networks, be it an infrastructure point or computer-to-computer ad-hoc networks. I'm not really sure why. I installed the latest AirPort Update (4.2.3, according to System Profiler). I also recently installed both iStumbler and KisMac v.21. When I started having issues, I thought that maybe one of these two programs might be the culprit, so I uninstalled both of them but I still have the same problem.
    Second, I've had issues with not being able to connect to certain websites. I use both Safari and BonEcho as my browsers. The specific sites seem random:
    www.weffriddles.com
    www.macrumors.com
    images.google.com
    sports.yahoo.com
    finance.yahoo.com
    to list a few.
    If you need any diagnostic information, please let me know.
    Thanks in advance for any advice/help you can provide!
    Tommy H.
    MacBook Pro   Mac OS X (10.4.9)   browsers: Safari, BonEcho/ Airport Driver Version: 4.2.3

    If you are trying to connect to a third-party router using WPA or WEP, there is a good chance that your Airport card was broken by Apple's 2007-02 Airport Update. There is no fix, and for many of us, our Macbooks and Macbook Pros are useless for wireless connections until Apple fixes the issue. At this point, Apple seems to be denying that there even is an issue, so we may all be in for a long wait indeed.
    See this thread if you have some time:
    http://discussions.apple.com/thread.jspa?threadID=883021&tstart=0

  • Hp C4580 printer won't connect to wireless network, but see network is available.

    I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
    My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
    Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
    I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
    lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
    I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
    Help would be great.

    Hello there! Welcome to the forums @Cushionman ,
    I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
    Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
    Let me know the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • [SOLVED]cannot connect to wireless network due to a channel setting

    Hello guys, I recently came across a problem with my wireless network.
    It was first a system-wide upgrade(adapted from the pacman's log):
    [2010-08-22 15:10] Running 'pacman -Syu'
    [2010-08-22 15:10] synchronizing package lists
    [2010-08-22 15:10] starting full system upgrade
    [2010-08-22 16:14] upgraded avahi (0.6.25-3 -> 0.6.27-2)
    [2010-08-22 16:14] upgraded nspr (4.8.4-1 -> 4.8.6-1)
    [2010-08-22 16:14] upgraded nss (3.12.6-3 -> 3.12.7-1)
    [2010-08-22 16:14] upgraded chromium (5.0.375.125-1 -> 5.0.375.127-1)
    [2010-08-22 16:14] upgraded curl (7.21.0-1 -> 7.21.1-1)
    [2010-08-22 16:14] upgraded freetype2 (2.4.1-1 -> 2.4.2-1)
    [2010-08-22 16:14] upgraded gnome-keyring (2.30.3-1 -> 2.30.3-2)
    [2010-08-22 16:14] upgraded gstreamer0.10 (0.10.29-1 -> 0.10.30-1)
    [2010-08-22 16:14] upgraded orc (0.4.6-1 -> 0.4.7-1)
    [2010-08-22 16:14] upgraded udev (160-1 -> 161-1)
    [2010-08-22 16:14] upgraded gstreamer0.10-base (0.10.29-1 -> 0.10.30-1)
    [2010-08-22 16:14] upgraded gstreamer0.10-base-plugins (0.10.29-1 -> 0.10.30-1)
    [2010-08-22 16:14] upgraded k3b (2.0.0-2 -> 2.0.1-2)
    [2010-08-22 16:14] upgraded linux-firmware (20100623-2 -> 20100807-1)
    [2010-08-22 16:14] >>> Updating module dependencies. Please wait ...
    [2010-08-22 16:14] >>> MKINITCPIO SETUP
    [2010-08-22 16:14] >>> ----------------
    [2010-08-22 16:14] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-08-22 16:14] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-08-22 16:14] >>> More information about mkinitcpio setup can be found here:
    [2010-08-22 16:14] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-08-22 16:14]
    [2010-08-22 16:14] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-08-22 16:14] ==> Building image "default"
    [2010-08-22 16:14] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-08-22 16:14] :: Begin build
    [2010-08-22 16:14] :: Parsing hook [base]
    [2010-08-22 16:14] :: Parsing hook [udev]
    [2010-08-22 16:14] :: Parsing hook [autodetect]
    [2010-08-22 16:14] :: Parsing hook [pata]
    [2010-08-22 16:14] :: Parsing hook [scsi]
    [2010-08-22 16:14] :: Parsing hook [sata]
    [2010-08-22 16:14] :: Parsing hook [usbinput]
    [2010-08-22 16:14] :: Parsing hook [keymap]
    [2010-08-22 16:15] :: Parsing hook [encrypt]
    [2010-08-22 16:15] :: Parsing hook [lvm2]
    [2010-08-22 16:15] :: Parsing hook [filesystems]
    [2010-08-22 16:15] :: Generating module dependencies
    [2010-08-22 16:15] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-08-22 16:15] ==> SUCCESS
    [2010-08-22 16:15] ==> Building image "fallback"
    [2010-08-22 16:15] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-08-22 16:15] :: Begin build
    [2010-08-22 16:15] :: Parsing hook [base]
    [2010-08-22 16:15] :: Parsing hook [udev]
    [2010-08-22 16:15] :: Parsing hook [pata]
    [2010-08-22 16:15] :: Parsing hook [scsi]
    [2010-08-22 16:15] :: Parsing hook [sata]
    [2010-08-22 16:15] :: Parsing hook [usbinput]
    [2010-08-22 16:15] :: Parsing hook [keymap]
    [2010-08-22 16:15] :: Parsing hook [encrypt]
    [2010-08-22 16:15] :: Parsing hook [lvm2]
    [2010-08-22 16:15] :: Parsing hook [filesystems]
    [2010-08-22 16:16] :: Generating module dependencies
    [2010-08-22 16:16] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-08-22 16:16] ==> SUCCESS
    [2010-08-22 16:16] upgraded kernel26 (2.6.34.3-1 -> 2.6.35.2-1)
    [2010-08-22 16:16] upgraded kernel26-headers (2.6.34.3-1 -> 2.6.35.2-1)
    [2010-08-22 16:16] upgraded libdatrie (0.2.3-1 -> 0.2.4-1)
    [2010-08-22 16:16] upgraded libgnome-keyring (2.30.1-1 -> 2.30.1-2)
    [2010-08-22 16:16] upgraded libpciaccess (0.11.0-1 -> 0.12.0-1)
    [2010-08-22 16:16] upgraded libxvmc (1.0.5-1 -> 1.0.6-1)
    [2010-08-22 16:16] upgraded mdadm (3.1.2-2 -> 3.1.3-1)
    [2010-08-22 16:16] upgraded pixman (0.18.2-1 -> 0.18.4-1)
    [2010-08-22 16:16] upgraded poppler-data (0.4.2-1 -> 0.4.3-1)
    [2010-08-22 16:16] upgraded powertop (1.11-2 -> 1.13-2)
    [2010-08-22 16:16] upgraded pycairo (1.8.8-1 -> 1.8.10-1)
    [2010-08-22 16:16] upgraded pygtk (2.17.0-1 -> 2.17.0-2)
    [2010-08-22 16:16] upgraded qimageblitz (0.0.5-1 -> 0.0.6-1)
    [2010-08-22 16:16] upgraded usbutils (0.87-1 -> 0.90-1)
    [2010-08-22 16:16] upgraded vlc (1.1.2-2 -> 1.1.3-1)
    [2010-08-22 16:16] upgraded xextproto (7.1.1-1 -> 7.1.2-1)
    [2010-08-22 16:16] upgraded xf86-input-evdev (2.4.0-1 -> 2.4.0-2)
    [2010-08-22 16:16] upgraded xproto (7.0.17-1 -> 7.0.18-1)
    Then after a reboot, I wouldn't be able to connect to wireless network anymore.
    I tried "netcfg Wireless_Archer(my wireless profile's name)" as usual, it replied:
    [root@mzws log]# netcfg Wireless_Archer
    :: Wireless_Archer up [BUSY]
    > WPA Authentication/Association Failed
    [FAIL]
    Next I tried to bing the network up manually. I followed the "Wireless Setup" and "WPA supplicant" wiki, then I get a timed out problem:
    [root@mzws ~]# ifconfig wlan0 up
    [root@mzws ~]# iwlist wlan0 scan
    wlan0 Scan completed :
    Cell 01 - Address: D8:5D:4C:59:52:EC
    Channel:13
    Frequency:2.472 GHz (Channel 13)
    Quality=66/70 Signal level=-44 dBm
    Encryption key:on
    ESSID:"Archer"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
    12 Mb/s; 24 Mb/s; 36 Mb/s
    Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=000000000bf666fe
    Extra: Last beacon: 70ms ago
    IE: Unknown: 0006417263686572
    IE: Unknown: 010882848B960C183048
    IE: Unknown: 03010D
    IE: Unknown: 2A0100
    IE: Unknown: 32041224606C
    IE: IEEE 802.11i/WPA2 Version 1
    Group Cipher : CCMP
    Pairwise Ciphers (1) : CCMP
    Authentication Suites (1) : PSK
    Preauthentication Supported
    IE: Unknown: DD0900037F01010008FF7F
    IE: Unknown: DD1A00037F0301000000D85D4C5952ECDA5D4C5952EC64002C010808
    Cell 02 - Address: 00:22:B0:8C:76:D7
    Channel:1
    Frequency:2.412 GHz (Channel 1)
    Quality=22/70 Signal level=-88 dBm
    Encryption key:on
    ESSID:"szpatrick"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
    18 Mb/s; 36 Mb/s; 54 Mb/s
    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
    Mode:Unknown/bug
    Extra:tsf=000000e93e5b9174
    Extra: Last beacon: 1340ms ago
    IE: Unknown: 0009737A7061747269636B
    IE: Unknown: 010882848B961224486C
    IE: Unknown: 030101
    IE: Unknown: 32040C183060
    IE: Unknown: 0706474220010D10
    IE: Unknown: 33082001020304050607
    IE: Unknown: 33082105060708090A0B
    IE: Unknown: DD050050F20500
    IE: Unknown: DD0E0050F204104A0001101044000102
    IE: Unknown: 050400010000
    IE: Unknown: 2A0100
    IE: Unknown: 2D1A6E1013FFFF0000010000000000000000000000000C0000000000
    IE: Unknown: 3D1601050100000000000000000000000000000000000000
    IE: Unknown: 7F0101
    IE: WPA Version 1
    Group Cipher : TKIP
    Pairwise Ciphers (2) : CCMP TKIP
    Authentication Suites (1) : PSK
    IE: IEEE 802.11i/WPA2 Version 1
    Group Cipher : TKIP
    Pairwise Ciphers (2) : CCMP TKIP
    Authentication Suites (1) : PSK
    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
    IE: Unknown: DD1E00904C336E1013FFFF0000010000000000000000000000000C0000000000
    IE: Unknown: DD1A00904C3401050100000000000000000000000000000000000000
    IE: Unknown: DD07000C4304000000
    Cell 03 - Address: 00:25:68:EB:3F:FC
    Channel:11
    Frequency:2.462 GHz (Channel 11)
    Quality=26/70 Signal level=-84 dBm
    Encryption key:on
    ESSID:"vodafone3FFB"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
    9 Mb/s; 12 Mb/s; 18 Mb/s
    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=00000002f6c23184
    Extra: Last beacon: 570ms ago
    IE: Unknown: 000C766F6461666F6E6533464642
    IE: Unknown: 010882848B960C121824
    IE: Unknown: 03010B
    IE: Unknown: 050400010000
    IE: Unknown: 200100
    IE: Unknown: 2A0104
    IE: IEEE 802.11i/WPA2 Version 1
    Group Cipher : CCMP
    Pairwise Ciphers (1) : CCMP
    Authentication Suites (1) : PSK
    IE: Unknown: 32043048606C
    IE: Unknown: DD180050F2020101020003A4000027A4000042435E0062322F00
    IE: Unknown: DD1E00904C334E101BFFFF000000000000000000000000000000000000000000
    IE: Unknown: 2D1A4E101BFFFF000000000000000000000000000000000000000000
    IE: Unknown: DD1A00904C340B071B00000000000000000000000000000000000000
    IE: Unknown: 3D160B071B00000000000000000000000000000000000000
    IE: Unknown: DD0900037F01010000FF7F
    IE: Unknown: DD0A00037F04010020000000
    IE: Unknown: 0706494520010D14
    [root@mzws ~]# wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
    [root@mzws ~]# iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"Archer"
    Mode:Managed Frequency:2.472 GHz Access Point: D8:5D:4C:59:52:EC
    Bit Rate=1 Mb/s Tx-Power=14 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=66/70 Signal level=-44 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    [root@mzws ~]# sleep 10s;dhcpcd wlan0
    dhcpcd[4076]: version 5.2.7 starting
    dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
    dhcpcd[4076]: wlan0: carrier lost
    dhcpcd[4076]: wlan0: carrier acquired
    dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
    dhcpcd[4076]: wlan0: broadcasting for a lease
    dhcpcd[4076]: wlan0: carrier lost
    dhcpcd[4076]: wlan0: carrier acquired
    dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
    dhcpcd[4076]: wlan0: broadcasting for a lease
    dhcpcd[4076]: wlan0: carrier lost
    dhcpcd[4076]: wlan0: carrier acquired
    dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
    dhcpcd[4076]: timed out
    I tried the "iwconfig wlan0 channel auto", but that didn't work. Here's the output of "lspci | grep -i net":
    [root@mzws ~]# lspci | grep -i net
    00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03)
    03:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
    So what's the problem here? I searched the forum and google, and it seemed that I connected to a wrong router(for sometimes I only one "carrier lost" then "timed out"), but how was that happened? Things worked quite well before the upgrading as well as in my Windows environment.
    Any reply would be appreciated! Thanks in advance!
    Last edited by karbon (2010-08-23 06:40:10)

    Thanks Proofrific, but I believe it's not, for the DHCP server is a built-in module in my wireless router.
    I am now able to connect to my wireless network now. And it seems to be a little kernel bug as I discovered a thread(sorry but I forgot which one) in the forum discussing a similar problem.... Somebody in that post suggested a work-around to change the channel, as their default setting is channel 13 or 12.
    I tried and it did work! Just simply open your router's setting page and then change the channel from auto to 3(in my case), and netcfg worked well now. For the manual configuration, I suppose the "iwconfig wlan0 channel 3" should be issued.
    Thanks everyone in the forum for providing their solutions!

  • Impossible connecting with wireless network Netgear WNR 2000

    I can not log on to my wireless network (Netgear WNR 2000) with my macbook. My other PC:s work fine and connect always. My Macbook only connect after I have restarted the router. When I use my Macbook in other places I can connect with wireless network. What is the problem?

    I'm assuming that you're using the right network password!  After that, the most common causes of difficulty are:
    - The router not set up for DHCP and so cannot allocate an IP address to the MacBook
    - The router has "MAC" Address Authentication (a security feature - don't mistake MAC for Mac[intosh]) turned on and the AirPort MAC address isn't in the pass list.
    - The default "Automatic" location in System Preferences > Networks has been modified so that it no longer works.
    Bob

  • Can I connect to wireless networks far away?

    How do I connect to wireless networks further away?
    Is there a way I can improve my laptops wireless range so I can connect to wireless networks further away?

    Hi!
    You can only connect to wireless networks that the notebook recognizes. If the notebook recognizes a wireless network, you can connect to them. If it doesnt recognize (because it is further away) you can not connect.
    Furthermore you can not improve the wireless range from the laptop. You can do this on a WLAN router, not on the notebook.
    Bye

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Need HELP! connecting to wireless network; IP Address problems!

    I am trying to connect to wireless networks using the AirPort built into my MacBook Pro. There are two specific networks I am trying to connect to, both are WEP protected. I know the passwords and can get into each of them but I cannot connect to the internet, which is the main reason for connecting to them in the first place! When I go into System Preferences and click on Network, I see that next to AirPort it says I am connected to the network but may not be able to connect to the internet because my computer has a Self Assigned IP address. I assume this means my computer is not receiving an IP address from the network. I am set on full auto with DHCP. So what's wrong? Please Help!!!

    That indicates that the MacBook Pro did not successfully communicate with the DHCP server on the network. Do those networks have access control (MAC address filtering) enabled? If so, the best solution is to reconfigure the base station so that this feature is disabled. This adds no real security since MAC addresses are easily discovered and cloned.
    If you can't disable access control, you will need to add the MAC address of the wireless interface of your MacBook Pro to the list of allowed clients.

  • [SOLVED] Cannot connect to wireless networks any more after update

    Hello,
    I updated my system some days ago and, after that, I can't connect to wireless networks any more.
    My network card is ath9k and I'm currently using wicd.
    When I try to connect to my wireless network, I get "Veryfing AP association" message, then it fails to connect.
    Here's the dmesg output :
    [ 6369.650201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6369.824358] r8169 0000:05:00.0 eth0: link down
    [ 6369.824375] r8169 0000:05:00.0 eth0: link down
    [ 6369.824398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6369.936721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6371.462702] r8169 0000:05:00.0 eth0: link up
    [ 6371.462718] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6373.214209] wlan0: authenticate with 00:1c:10:57:47:17
    [ 6373.236813] wlan0: send auth to 00:1c:10:57:47:17 (try 1/3)
    [ 6373.248706] wlan0: authenticated
    [ 6373.248735] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [ 6373.248737] ath9k 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [ 6373.248739] ath9k 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [ 6373.250756] wlan0: associate with 00:1c:10:57:47:17 (try 1/3)
    [ 6373.253150] wlan0: RX AssocResp from 00:1c:10:57:47:17 (capab=0x411 status=0 aid=3)
    [ 6373.253379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 6373.253418] wlan0: associated
    [ 6373.253431] ath9k 0000:09:00.0 wlan0: failed to set key 0
    [ 6405.384916] wlan0: deauthenticating from 00:1c:10:57:47:17 by local choice (reason=3)
    [ 6405.387398] cfg80211: Calling CRDA to update world regulatory domain
    [ 6409.789779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6409.890892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6410.069734] r8169 0000:05:00.0 eth0: link down
    [ 6410.069750] r8169 0000:05:00.0 eth0: link down
    [ 6410.069778] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6410.263183] r8169 0000:05:00.0 eth0: link down
    [ 6410.263212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6411.717705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6411.898268] r8169 0000:05:00.0 eth0: link down
    [ 6411.898297] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6413.630832] r8169 0000:05:00.0 eth0: link up
    [ 6413.630848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6415.903790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6416.089275] r8169 0000:05:00.0 eth0: link down
    [ 6416.089302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6416.089327] r8169 0000:05:00.0 eth0: link down
    [ 6416.386308] r8169 0000:05:00.0 eth0: link down
    [ 6416.386338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 6418.067675] r8169 0000:05:00.0 eth0: link up
    [ 6418.067691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    This particular line caught my attention: " wlan0: de-authenticating from 00:1c:10:57:47:17 by local choice (reason=3)". So I searched for it (without the MAC address) on the internet and found several solutions for it, involving wpa_supplicant, dhcpcd, IPv6 (disable it on /etc/sysctl.d/40-ipv6.conf) and card power management (operation not supported, don't have option on BIOS), but none of them worked for me.
    Here's an excerpt from /var/log/wicd/wicd.log:
    2014/03/01 11:48:15 :: Connecting to wireless network Curiosity
    2014/03/01 11:48:15 :: Putting interface down
    2014/03/01 11:48:15 :: Releasing DHCP leases...
    2014/03/01 11:48:15 :: Setting false IP...
    2014/03/01 11:48:15 :: Stopping wpa_supplicant
    2014/03/01 11:48:15 :: Flushing the routing table...
    2014/03/01 11:48:15 :: Putting interface up...
    2014/03/01 11:48:17 :: Attempting to authenticate...
    2014/03/01 11:48:19 :: Setting static IP : 192.168.2.188
    2014/03/01 11:48:19 :: Setting default gateway : 192.168.2.1
    2014/03/01 11:48:19 :: Verifying AP association...
    2014/03/01 11:48:19 :: Attempt 1 of 10...
    2014/03/01 11:48:24 :: Attempt 2 of 10...
    2014/03/01 11:48:27 :: Attempt 3 of 10...
    2014/03/01 11:48:30 :: Attempt 4 of 10...
    2014/03/01 11:48:33 :: Attempt 5 of 10...
    2014/03/01 11:48:36 :: Attempt 6 of 10...
    2014/03/01 11:48:39 :: Attempt 7 of 10...
    2014/03/01 11:48:42 :: Attempt 8 of 10...
    2014/03/01 11:48:45 :: Attempt 9 of 10...
    2014/03/01 11:48:48 :: Attempt 10 of 10...
    2014/03/01 11:48:51 :: Connection Failed: Failed to ping the access point!
    2014/03/01 11:48:51 :: exiting connection thread
    2014/03/01 11:48:55 :: Sending connection attempt result association_failed
    2014/03/01 11:48:55 :: Autoconnecting...
    2014/03/01 11:48:55 :: Attempting to autoconnect with wired interface...
    2014/03/01 11:48:55 :: Putting interface down
    2014/03/01 11:48:55 :: Releasing DHCP leases...
    2014/03/01 11:48:55 :: Setting false IP...
    2014/03/01 11:48:55 :: Stopping wpa_supplicant
    2014/03/01 11:48:55 :: Flushing the routing table...
    2014/03/01 11:48:55 :: Putting interface up...
    2014/03/01 11:48:58 :: Setting static IP : 192.168.2.188
    2014/03/01 11:48:58 :: Setting default gateway : 192.168.2.1
    2014/03/01 11:48:58 :: Connecting thread exiting.
    2014/03/01 11:49:01 :: Putting interface down
    2014/03/01 11:49:01 :: Releasing DHCP leases...
    2014/03/01 11:49:01 :: Setting false IP...
    2014/03/01 11:49:02 :: Stopping wpa_supplicant
    2014/03/01 11:49:02 :: Flushing the routing table...
    2014/03/01 11:49:02 :: Putting interface up...
    2014/03/01 11:49:04 :: Setting static IP : 192.168.2.188
    2014/03/01 11:49:04 :: Setting default gateway : 192.168.2.1
    2014/03/01 11:49:04 :: Connecting thread exiting.
    2014/03/01 11:49:07 :: Sending connection attempt result success
    I've been connecting through wire since then and it's extremely uncomfortable being planted in one place.
    Thanks.
    Last edited by joaowojwicz (2014-04-03 12:17:53)

    ewaller wrote:Well, let's start with a couple sanity checks.  Look at the output of uname -a and of pacman -Qi linux  and ensure that the running kernel (uname) is the same version that is installed.
    Then. please post the output of lspci -nn and of ip link
    Then, take a look at the output of sudo iw wlan0 scan
    and see if you can see your AP.  Also, verify that your wireless is called wlan0 by checking the ouput of ip link
    Okay
    >>log: uname -a
    Linux Canopus 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:10:07 CET 2014 i686 GNU/Linux
    >>log: pacman -Qi linux
    Name : linux
    Version : 3.13.5-1
    Description : The Linux kernel and modules
    Architecture : i686
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.13.5
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : None
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 61687.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sat 22 Feb 2014 20:11:46 BRT
    Install Date : Mon 24 Feb 2014 02:50:00 BRT
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : SHA256 Sum
    >>log: lspci -nn
    00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
    00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
    00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
    00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
    00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
    00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
    00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
    00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
    00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
    00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
    00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
    00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
    00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
    00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
    05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
    09:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
    0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
    Yes, my wireless is called wlan0. I linked something to /dev/null to get the predictable names
    >>log: ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 94:39:e5:f2:17:3f brd ff:ff:ff:ff:ff:ff
    3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 18:03:73:93:4d:1b brd ff:ff:ff:ff:ff:ff
    I'll just paste my wireless connection here.
    >>log: sudo iw wlan0 scan
    BSS 00:1c:10:57:47:17(on wlan0)
    TSF: 59645240249 usec (0d, 16:34:05)
    freq: 2462
    beacon interval: 100 TUs
    capability: ESS Privacy ShortSlotTime (0x0411)
    signal: -31.00 dBm
    last seen: 260 ms ago
    Information elements from Probe Response frame:
    SSID: Curiosity
    Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
    DS Parameter set: channel 11
    ERP: Barker_Preamble_Mode
    ERP D4.0: Barker_Preamble_Mode
    Extended supported rates: 6.0 9.0 12.0 48.0
    karol wrote:
    Post the list of packages that were updated.
    When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.
    Okay, put code tag now. Here's the whole log since Feb, 24th. This was the day I started having problems.
    [2014-02-24 02:32] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 02:32] [PACMAN] synchronizing package lists
    [2014-02-24 02:32] [PACMAN] starting full system upgrade
    [2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 60 trust: 1-, 0q, 0n, 5m, 0f, 0u
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
    [2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Importing owner trust values...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Updating trust database...
    [2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
    [2014-02-24 02:49] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
    [2014-02-24 02:49] [PACMAN] upgraded hicolor-icon-theme (0.12-2 -> 0.13-1)
    [2014-02-24 02:49] [PACMAN] upgraded banshee (2.6.1-2 -> 2.6.2-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez-cups (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez-hid2hci (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez-libs (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez-plugins (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded bluez-utils (5.14-1 -> 5.15-1)
    [2014-02-24 02:49] [PACMAN] upgraded cairo-perl (1.103-2 -> 1.104-1)
    [2014-02-24 02:49] [PACMAN] upgraded cups-filters (1.0.45-1 -> 1.0.46-1)
    [2014-02-24 02:49] [PACMAN] upgraded dbus-glib (0.100.2-1 -> 0.102-1)
    [2014-02-24 02:49] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
    [2014-02-24 02:49] [PACMAN] upgraded easytag (2.1.9-1 -> 2.1.10-1)
    [2014-02-24 02:49] [PACMAN] upgraded ethtool (1:3.11-1 -> 1:3.13-1)
    [2014-02-24 02:49] [PACMAN] upgraded flashplugin (11.2.202.336-1 -> 11.2.202.341-1)
    [2014-02-24 02:49] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
    [2014-02-24 02:49] [PACMAN] upgraded gdk-pixbuf2 (2.30.4-1 -> 2.30.5-1)
    [2014-02-24 02:49] [PACMAN] upgraded glib-perl (1.301-1 -> 1.304-1)
    [2014-02-24 02:49] [PACMAN] upgraded gparted (0.17.0-2 -> 0.18.0-1)
    [2014-02-24 02:49] [PACMAN] upgraded pango-perl (1.224-2 -> 1.225-1)
    [2014-02-24 02:49] [PACMAN] upgraded gtk2-perl (1.247-2 -> 1.249-1)
    [2014-02-24 02:49] [PACMAN] upgraded imagemagick (6.8.8.6-1 -> 6.8.8.7-1)
    [2014-02-24 02:49] [PACMAN] upgraded kdesdk-poxml (4.12.2-1 -> 4.12.2-2)
    [2014-02-24 02:49] [PACMAN] upgraded libass (0.10.2-2 -> 0.11.1-1)
    [2014-02-24 02:49] [PACMAN] upgraded libfm (1.1.2.2-2 -> 1.2.0-3)
    [2014-02-24 02:49] [PACMAN] upgraded libftdi (1.1-2 -> 1.1-3)
    [2014-02-24 02:49] [PACMAN] upgraded libindi (0.9.6-7 -> 0.9.7-1)
    [2014-02-24 02:49] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
    [2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-02-24 02:50] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
    [2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-02-24 02:50] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
    [2014-02-24 02:50] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
    [2014-02-24 02:50] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
    [2014-02-24 02:50] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
    [2014-02-24 02:50] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
    [2014-02-24 02:50] [PACMAN] upgraded lirc-utils (1:0.9.0-69 -> 1:0.9.0-70)
    [2014-02-24 02:50] [PACMAN] upgraded lynx (2.8.7-7 -> 2.8.8-1)
    [2014-02-24 02:50] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
    [2014-02-24 02:50] [PACMAN] upgraded mercurial (2.9-1 -> 2.9-2)
    [2014-02-24 02:50] [PACMAN] upgraded mutter (3.10.3-1 -> 3.10.4-1)
    [2014-02-24 02:50] [PACMAN] upgraded networkmanager (0.9.8.8-1 -> 0.9.8.8-3)
    [2014-02-24 02:50] [PACMAN] upgraded networkmanager-pptp (0.9.8.4-1 -> 0.9.8.4-2)
    [2014-02-24 02:50] [PACMAN] upgraded pcmanfm (1.1.2-2 -> 1.2.0-1)
    [2014-02-24 02:50] [PACMAN] upgraded postgresql-libs (9.3.2-4 -> 9.3.3-1)
    [2014-02-24 02:50] [PACMAN] upgraded ppp (2.4.5-8 -> 2.4.6-1)
    [2014-02-24 02:50] [PACMAN] upgraded python2-configobj (4.7.2-6 -> 5.0.1-1)
    [2014-02-24 02:50] [PACMAN] upgraded python2-urwid (1.1.1-1 -> 1.2.0-1)
    [2014-02-24 02:50] [PACMAN] upgraded python2-zope-interface (4.0.5-2 -> 4.1.0-1)
    [2014-02-24 02:50] [PACMAN] upgraded sbc (1.1-1 -> 1.2-1)
    [2014-02-24 02:50] [PACMAN] upgraded t1lib (5.1.2-4 -> 5.1.2-5)
    [2014-02-24 02:50] [PACMAN] upgraded totem-plparser (3.10.0-4 -> 3.10.1-1)
    [2014-02-24 02:50] [PACMAN] upgraded vimpager (1.8.5-1 -> 1.8.6-1)
    [2014-02-24 02:50] [PACMAN] upgraded vlc (2.1.3-1 -> 2.1.4-1)
    [2014-02-24 02:50] [PACMAN] upgraded webkitgtk (2.2.4-2 -> 2.2.5-1)
    [2014-02-24 02:50] [PACMAN] upgraded wine (1.7.12-2 -> 1.7.13-1)
    [2014-02-24 02:50] [PACMAN] upgraded xarchiver (0.5.2-6 -> 0.5.3-1)
    [2014-02-24 02:50] [PACMAN] upgraded xcb-util-wm (0.4.0-1 -> 0.4.1-1)
    [2014-02-24 02:50] [PACMAN] upgraded xmlto (0.0.25-3 -> 0.0.25-5)
    [2014-02-24 02:50] [PACMAN] upgraded youtube-dl (2014.02.13-1 -> 2014.02.22.1-1)
    [2014-02-24 12:51] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 12:51] [PACMAN] synchronizing package lists
    [2014-02-24 12:51] [PACMAN] starting full system upgrade
    [2014-02-24 12:57] [PACMAN] upgraded ffmpeg (1:2.1.3-1 -> 1:2.1.4-1)
    [2014-02-24 12:57] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
    [2014-02-24 12:57] [PACMAN] upgraded python2-configobj (5.0.1-1 -> 5.0.1-2)
    [2014-02-24 12:57] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6-1)
    [2014-02-24 12:57] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
    [2014-02-24 12:57] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
    [2014-02-24 12:57] [PACMAN] upgraded xbmc (12.3-8 -> 12.3-9)
    [2014-02-24 13:19] [PACMAN] Running 'pacman -Syy'
    [2014-02-24 13:19] [PACMAN] synchronizing package lists
    [2014-02-24 13:20] [PACMAN] Running 'pacman -Suu dhcpcd'
    [2014-02-24 13:20] [PACMAN] starting full system upgrade
    [2014-02-24 13:24] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/downgrade/downgrade-3.3-1-any.pkg.tar.xz'
    [2014-02-24 13:24] [PACMAN] installed downgrade (3.3-1)
    [2014-02-24 16:04] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 16:04] [PACMAN] synchronizing package lists
    [2014-02-24 16:04] [PACMAN] starting full system upgrade
    [2014-02-24 16:04] [PACMAN] upgraded vim-spell-br (20120506-1 -> 20120802-1)
    [2014-02-24 16:04] [PACMAN] upgraded vim-spell-en (20120506-1 -> 20120802-1)
    [2014-02-24 18:30] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 18:30] [PACMAN] synchronizing package lists
    [2014-02-24 18:30] [PACMAN] starting full system upgrade
    [2014-02-24 20:13] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 20:13] [PACMAN] synchronizing package lists
    [2014-02-24 20:13] [PACMAN] starting full system upgrade
    [2014-02-24 21:31] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 21:31] [PACMAN] synchronizing package lists
    [2014-02-24 21:31] [PACMAN] starting full system upgrade
    [2014-02-24 21:53] [PACMAN] Running 'pacman -Suy'
    [2014-02-24 21:53] [PACMAN] synchronizing package lists
    [2014-02-24 21:53] [PACMAN] starting full system upgrade
    [2014-02-24 22:38] [PACMAN] Running 'pacman -R networkmanager'
    [2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet'
    [2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control'
    [2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals'
    [2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module'
    [2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module telepathy-kde-send-file telepathy-kde-text-ui'
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-text-ui (0.7.1-2)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-send-file (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-integration-module (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-filetransfer-handler (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-desktop-applets (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-runner (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-auth-handler (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-approver (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-accounts-kcm (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-list (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed skype4empathy (20110407-4)
    [2014-02-24 22:40] [PACMAN] removed telepathy-kde-common-internals (0.7.1-1)
    [2014-02-24 22:40] [PACMAN] removed empathy (3.10.3-1)
    [2014-02-24 22:40] [PACMAN] removed telepathy-mission-control (5.16.0-1)
    [2014-02-24 22:41] [PACMAN] removed kdeplasma-applets-networkmanagement (1:0.9.0.9-1)
    [2014-02-24 22:41] [PACMAN] removed network-manager-applet (0.9.8.8-1)
    [2014-02-24 22:41] [PACMAN] removed networkmanager-pptp (0.9.8.4-2)
    [2014-02-24 22:41] [PACMAN] removed networkmanager-openvpn (0.9.8.4-1)
    [2014-02-24 22:41] [ALPM] warning: /etc/NetworkManager/NetworkManager.conf saved as /etc/NetworkManager/NetworkManager.conf.pacsave
    [2014-02-24 22:41] [PACMAN] removed networkmanager (0.9.8.8-3)
    [2014-02-25 03:40] [PACMAN] Running 'pacman -Suy'
    [2014-02-25 03:40] [PACMAN] synchronizing package lists
    [2014-02-25 03:40] [PACMAN] starting full system upgrade
    [2014-02-25 03:44] [PACMAN] upgraded youtube-dl (2014.02.22.1-1 -> 2014.02.24-1)
    [2014-02-25 12:23] [PACMAN] Running 'pacman -Suy'
    [2014-02-25 12:23] [PACMAN] synchronizing package lists
    [2014-02-25 12:24] [PACMAN] starting full system upgrade
    [2014-02-25 12:24] [PACMAN] upgraded dmenu (4.5-3 -> 4.5.13.5ed5e90-1)
    [2014-02-25 12:24] [PACMAN] upgraded telepathy-glib (0.22.0-1 -> 0.22.1-1)
    [2014-02-25 12:24] [PACMAN] upgraded tumbler (0.1.29-1 -> 0.1.30-1)
    [2014-02-25 12:25] [PACMAN] upgraded youtube-dl (2014.02.24-1 -> 2014.02.25-1)
    [2014-02-25 14:55] [PACMAN] Running 'pacman -Suy'
    [2014-02-25 14:55] [PACMAN] synchronizing package lists
    [2014-02-25 14:55] [PACMAN] starting full system upgrade
    [2014-02-25 15:19] [PACMAN] upgraded ipython2 (1.1.0-1 -> 1.2.1-1)
    [2014-02-25 15:19] [PACMAN] upgraded python2-pip (1.5.2-1 -> 1.5.4-1)
    [2014-02-25 17:13] [PACMAN] Running 'pacman -Suy'
    [2014-02-25 17:13] [PACMAN] synchronizing package lists
    [2014-02-25 17:13] [PACMAN] starting full system upgrade
    [2014-02-25 18:10] [PACMAN] Running 'pacman -Suy'
    [2014-02-25 18:10] [PACMAN] synchronizing package lists
    [2014-02-25 18:10] [PACMAN] starting full system upgrade
    [2014-02-25 18:41] [PACMAN] Running 'pacman -S fbgrab'
    [2014-02-25 18:41] [PACMAN] installed fbgrab (1.0-7)
    [2014-02-26 13:19] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 13:19] [PACMAN] synchronizing package lists
    [2014-02-26 13:19] [PACMAN] starting full system upgrade
    [2014-02-26 13:25] [PACMAN] upgraded libmariadbclient (5.5.35-1 -> 5.5.36-1)
    [2014-02-26 13:25] [PACMAN] upgraded mariadb-clients (5.5.35-1 -> 5.5.36-1)
    [2014-02-26 13:25] [PACMAN] upgraded mariadb (5.5.35-1 -> 5.5.36-1)
    [2014-02-26 13:25] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
    [2014-02-26 13:25] [PACMAN] upgraded s-nail (14.6-1 -> 14.6.1-1)
    [2014-02-26 13:26] [PACMAN] upgraded xbmc (12.3-9 -> 12.3-10)
    [2014-02-26 16:00] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
    [2014-02-26 16:02] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
    [2014-02-26 16:42] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 16:42] [PACMAN] synchronizing package lists
    [2014-02-26 16:42] [PACMAN] starting full system upgrade
    [2014-02-26 17:25] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 17:25] [PACMAN] synchronizing package lists
    [2014-02-26 17:25] [PACMAN] starting full system upgrade
    [2014-02-26 17:25] [PACMAN] upgraded libaccounts-glib (1.15-1 -> 1.16-1)
    [2014-02-26 17:25] [PACMAN] upgraded libaccounts-qt (1.10-1 -> 1.11-1)
    [2014-02-26 17:52] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 17:52] [PACMAN] synchronizing package lists
    [2014-02-26 17:52] [PACMAN] starting full system upgrade
    [2014-02-26 17:53] [PACMAN] upgraded signon (8.55-1 -> 8.56-1)
    [2014-02-26 18:08] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 18:08] [PACMAN] synchronizing package lists
    [2014-02-26 18:08] [PACMAN] starting full system upgrade
    [2014-02-26 21:52] [PACMAN] Running 'pacman -Suy'
    [2014-02-26 21:52] [PACMAN] synchronizing package lists
    [2014-02-26 21:52] [PACMAN] starting full system upgrade
    [2014-02-26 22:08] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
    [2014-02-26 22:41] [PACMAN] Running 'pacman -S xchat'
    [2014-02-26 22:41] [PACMAN] installed xchat (2.8.8-13)
    [2014-02-27 00:02] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 00:02] [PACMAN] synchronizing package lists
    [2014-02-27 00:02] [PACMAN] starting full system upgrade
    [2014-02-27 01:41] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 01:41] [PACMAN] synchronizing package lists
    [2014-02-27 01:41] [PACMAN] starting full system upgrade
    [2014-02-27 12:20] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 12:20] [PACMAN] synchronizing package lists
    [2014-02-27 12:20] [PACMAN] starting full system upgrade
    [2014-02-27 12:26] [PACMAN] upgraded net-snmp (5.7.2-8 -> 5.7.2.1-1)
    [2014-02-27 12:26] [PACMAN] upgraded youtube-dl (2014.02.25-1 -> 2014.02.26-1)
    [2014-02-27 16:01] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 16:01] [PACMAN] synchronizing package lists
    [2014-02-27 16:01] [PACMAN] starting full system upgrade
    [2014-02-27 16:05] [PACMAN] upgraded wpa_supplicant (2.0-4 -> 2.1-3)
    [2014-02-27 19:58] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 19:58] [PACMAN] synchronizing package lists
    [2014-02-27 19:58] [PACMAN] starting full system upgrade
    [2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus'
    [2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus-font'
    [2014-02-27 20:01] [PACMAN] installed terminus-font (4.38-4)
    [2014-02-27 21:04] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 21:04] [PACMAN] synchronizing package lists
    [2014-02-27 21:04] [PACMAN] starting full system upgrade
    [2014-02-27 22:51] [PACMAN] Running 'pacman -Suy'
    [2014-02-27 22:51] [PACMAN] synchronizing package lists
    [2014-02-27 22:51] [PACMAN] starting full system upgrade
    [2014-02-28 12:09] [PACMAN] Running 'pacman -Suy'
    [2014-02-28 12:09] [PACMAN] synchronizing package lists
    [2014-02-28 12:09] [PACMAN] starting full system upgrade
    [2014-02-28 16:51] [PACMAN] Running 'pacman -Suy'
    [2014-02-28 16:51] [PACMAN] synchronizing package lists
    [2014-02-28 16:52] [PACMAN] starting full system upgrade
    [2014-03-01 12:10] [PACMAN] Running 'pacman -S bluez'
    [2014-03-01 12:19] [PACMAN] Running 'pacman -S xf86-input-joystick linuxconsole'
    [2014-03-01 12:20] [PACMAN] installed xf86-input-joystick (1.6.2-3)
    [2014-03-01 12:20] [PACMAN] installed linuxconsole (1.4.6-1)
    [2014-03-01 12:21] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/rejoystick/rejoystick-0.8.1-3-i686.pkg.tar.xz'
    [2014-03-01 12:21] [PACMAN] installed rejoystick (0.8.1-3)
    [2014-03-01 12:22] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/joystick/joystick-20051019-12-i686.pkg.tar.xz'
    [2014-03-01 12:48] [PACMAN] Running 'pacman -Suy'
    [2014-03-01 12:48] [PACMAN] synchronizing package lists
    [2014-03-01 12:48] [PACMAN] starting full system upgrade
    [2014-03-01 12:49] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
    [2014-03-01 12:49] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
    [2014-03-01 12:49] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
    [2014-03-01 12:49] [PACMAN] upgraded feh (2.9.3-1 -> 2.10-1)
    [2014-03-01 12:49] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
    [2014-03-01 12:49] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
    [2014-03-01 12:49] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
    [2014-03-01 12:49] [PACMAN] upgraded ppp (2.4.6-1 -> 2.4.6-2

  • Can not connect to wireless networks with ipad 2

    My ipad used to connect to the wireless net at home and in public areas.
    Now all by the sudden it can't "see"  the network.
    Message: " could not connect to wireless network"
    I have tried "everything" also on different networks,
    except resetting the modem.
    My iPhone works, as do all my other computers.
    Modem is Zyxel P2812

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't use apps because it says I'm not connected to wireless network

    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??

    rixxy12345 wrote:
    How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
    Which apps?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • I have done the step 1 to 3,but still cannot connect the wireless network?

    i have done the step 1 to 3,but still cannot connect the wireless network?

    Step 1 to 3 of what? Can you elaborate on the issue?

  • Can't connect to wireless network with encryption.

    I have had no trouble connecting to hotel wireless networks, or my college wireless network. However, when I try to connect to my home network wirelessly, or another family member's network wirelessly, my connection times out when I enter the username and password. I have a MacBook Pro if that makes a difference.

    Try typing a $ in front of the password.

  • M100: Wireless network in hotels in asia

    I have a problem with my Toshiba Portege M100:
    Normally when you want to use the wi-fi network in an hotel in Asia, you have to connect through a popup screen that appears automatically after activating wi-fi.
    For some reason it's not working anymore (the popup doesn't appear).
    My other notebook still works, so the problem is not in the config of the hotel.
    Is there anyone out there with some experience in this area?
    Thanks in advance for helping out.
    Greetings,
    Henk

    Hello
    Which pop-up screen you mean exactly? If the WLAN card is enabled go into WLAN properties and check Wireless Networks tab. Activate Use Windows. Option and click on refresh under available networks.
    All available networks will be shown. If the WLAN is not encrypted the connection is very easy.

  • WRE54G losing connection to Wireless Network?

    I sent this to [email protected], and I was kindly informed that the service had been discontinued and I should probably redirect over here.  Yay.  Anyway, here's the deal, anybody with any ideas would be greatly appreciated.  Thanks!
    I recently purchased a Linksys WRE54G Wireless Extender to extend a wireless network. I attempted the Auto Configuration, but after holding the side button for 5 seconds and releasing, all I saw was a red light and a blue light - upon moving the extender to a point at the edge of my network, I tried connecting to it, but could not. I then connected the Extender to the wireless router (A D-Link) with the network cable and completed the Manual Configuration. I had to change the device's assigned IP address from 192.168.0.x to 192.168.1.x, but once I did that and positioned the extender in a room where my computer was recieving 3/5 signal strength, I could connect to the wireless network at a much greater distance than I had been able to before, indicating that the extender was working. The Extender worked great for 18 hours or so, at which point I could no longer access the Internet. My network properties still show 3/5 or 4/5 connection strength, so I am connecting to the extender fine, but the Extender now shows one red and one blue light again. I attempted the Automatic Configuration again from this point, but all I get is one solid blue and one flashing red/blue, which after about 5 seconds turns solid red. I try repairing my connection at my computer, but I am not being assigned an IP address.
    Any ideas? Is the extender too far away from the router? I find this hard to believe since it is located in a position where my computer recieves 3/5 - 5/5 signal strength.
    The router is equipped with an aftermarket Hawking amplified 500 mW omnidirectional signal booster, could this be causing interference to the extender which is located ~40' directly across (line-of-sight through 2 windows) a courtyard? I have not tried unplugging this and reattaching the OEM antenna to the D-Link router.
    I'd be glad to accept any ideas, since I've been working on extending this wireless network (its at a hotel) for a while now with very little success, and the WRE54G product has had by far the most promise of several tries.
    Thank you for the help!

    Nope, can't have that. You either don't have RE configured right or some 2.4 gHz interference broke the connection to your router. The red link indicates that the RE is NOT connected to your network.  I thought you said that it was working for 18 hours.  Did you try the power cycle to restore all network connections and resetting your preferred networks? If you can't ping the RE and you can't access the RE webpage, you first have to get it connected to the network first. You can follow the steps in this post rather than the "autoconfig" method, which is not that reliable.
    http://forums.linksys.com/linksys/board/message?board.id=Range_Expanders&thread.id=692
    The instructions will be a bit different in your case cuz you indicated the d-link router IP addy is 192.168.0.1. Most routers are 192.168.1.1. So you should set the RE IP addy at 192.168.0.240. Post back if you have any difficulties doing a step.
    Edit: Try this instead if power cycle doesn't work. Press the reset button in for 30 sec with paper clip to restore factory default. Then bring the RE close to the router again and press the "auto-config" button til the link blue light is constant. Then position it where you want it. If RE disconnects again, you might have it too far from the router or that antenna might be interfering.
    Edit 2: Read the first post closer and saw you manually config-ed RE once already. You should not use the auto-config button anymore. You definitely need to reset and start over with the manual config.
    Message Edited by Luckydog on 06-26-2008 06:54 AM
    Message Edited by Luckydog on 06-26-2008 09:23 AM

Maybe you are looking for

  • Neo iOn-2 iPod  Vehicle Adapter doesn't display tune info on vehicle screen

    I recently bought a "Neo iOn-2 iPod to GM12" for my 2004 Chevy Avalanche. It plays GREAT thru the factory installed Bose system but does NOT display what's playing on the XM/Radio screen. I was told by the Mp3YourCar.Com people that they are awaiting

  • Mapping - Split string separated by value ;

    Hi, I have a mapping where 4 source values makes the key for 1 target value. In the target string (result after value mapping) i want to get the last value in the string "TargetValue1. <i>SourceValue1;SourceValue2;SourceValue3;SourceValue4;TargetValu

  • Functionality of BPC 10.0

    Hi all, I would like to know if the BPC can perform the following functions: Requirement Yes/No Automatic mapping of accounts between parent and children entities with different Chart of Accounts Ability to adjust historical foreign exchange rates pa

  • How does the login process works with a bind to AD?

    Hi there, I am trying to bind our mac to our Active Directory. Before doing I'd like to understand well how the login process works. Is there any reference I could look up to? For what I've understood until now with an example user "testAccount" and

  • SETTING DEFAULT LANGUAGE IN BEA WEBLOGIC SERVER 11G

    Hello, I want to change the default language for Oracle Bea Web Logic 11G (10.3.4.0). Can anyone tell me in what opcion can i do it? Thanks in advance. Regards,