Connecting TV and Computer Speakers at the same t

Hi,
I have a SB Li've Value and I wanted to connect my regular computer speakers as well as my TV to it.
I am using a mono plug to hook my computer speakers and my TV currently. Whenever I want output on my TV I have to unhook my computer speakers from the soundcard and plug in the mono plug from the TV.
Is there any possible that I do not have to do that and I can get output on both using the mono plugs.
Please help me out as I have looked al over the place and I cannot find an answer to this problem.

Get an /8" stereo Y splitter (single male, split side females)

Similar Messages

  • TS3018 earbuds and bluetooth speakers at the same time?

    Can IPod Touch be used with earbuds and bluetooth speakers at the same time?

    No. You can only select which output device you want.

  • Can you play music to wireless and wired speakers at the same time?

    If you have Airport express, can you play music on speakers plugged into the airport express at the same time as you play from speakers attached to your computer?
    Thanks

    Yes you can. In the bottom right hand corner of the iTunes main window there is a drop down menu. Select the AirPort Express base station(s) you'd like to send your music to and also select 'Computer'. Not only will it play through all, it will play IN SYNC!
    I can't remember with which version of iTunes this was introduced, best to grab the latest version to be sure.

  • Keeping a Officejet Pro 8600 connected wireless and by ethernet at the same time

    I have one computer connected to this printer by ethernet, because the computer is to far away to be connected by usb. Whenever I want to print off of a laptop or tablet the printer won't print unless I physically disconnect the ethernet cable. When someone wants to print from the ethernet connected printer, they have to go back and reconnect the cable. Is there a way to fix this? Because quite honestly its a PAIN. I have had other printers from other manufactures that I was able to do this with. I find it hard to believe that HP would have such a backwards and utterly inconvenient setup.

    Welcome to the HP Community @zhadum5000 !
    I read through your post and wanted to respond to you. The printer cannot connect to both wireless and ethernet at the same time. You can connect wireless and USB however, you cannot combine both network connections. Your best bet would be to either stick with only ethernet, or only wireless.
    I hope this helps answer your question!
    Have a great day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Is there a way to play music through the internal speakers and external speakers at the same time?

    I have iHome speakers and would like to listen to my music through them and the internal speakers of my Macbook pro at the same time.

    More information:
    https://discussions.apple.com/thread/2609977

  • Using External Speakers And Internal Speakers At The Same Time

    I know this is probably a long shot, but is it possible to use both the external speakers I have (the cheaper Bose ones) and the internal speakers of my Intel iMac at the same time?
    Probably not, right?
    I'm just looking for a cool three speaker kind of experience. Just wondering. Thanks for the help. Asante sana.
    Pete

    Pete
    Once you plug into the external headphone jack that's were your audio output for iTunes is. The exception here for me is at start-up, the sound will use the internals untill the external set-up is detected.
    Something else you can do to add more to your external set-up is to split it with an adapter(s).
    Examples use this adapter: http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=search&ModuleNo=1221&criteria= one lead to your powered externals,
    and the other to a Stereo or TV with this adapter: http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=31700&doy=19m2
    You can buy these adapters at most electronics outlets.
    Hope this helps you expand on your sound set-up!
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Can I connect hdmi and display port at the same time?

    The toslink on my 2010 mini is glitchy. So I want to run the audio through the hdmi to my recevier. And the video through the minidisplay port to hdmi to a monitor. Will this work? Can I use the hdmi for audio only and the display port for video only? Thanks

    Yes, that is exactly how to use dual monitors.
    Optionally:
    if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
    or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
    In Quick Links try Account if Sign In does not work.

  • When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

    My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black.  Thanks!

    Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

  • My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    My ipod has a black screen.  I have tried to hold the sleep/off button and menu button at the same time with no luck.   I connected to my computer and tried restore on itunes -  still with a black screen a voice said "screen locked'  code 542

    Is the iPad charged?  Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

  • Possibility to route Sound? (connect headphone and speakers at the same ti

    Hi is it possible to route the sound of my X-FI Titanium (PCIe)?
    I want to connect Headphone and 2. Speakers at the same time and want to be able to decide where the sound comes out.
    It wasnt possible with my previous audigy 2zs, but it thought now it could be possible, because every cheap onboard sound can do that.
    The only solution so far was to choose stereo surround but that wont work in games because most games recognise 4 speakers and some sound is missing.
    Any hints?
    Thanks in Advance

    I used to be able to do that in XP with an SB Li've 024 which?was like 2+2 stereo card before 5. came out.
    Thinking....maybe somethig like [url="http://www.pccables.com/images/05004.jpg">this[/url]?(3.5mm STEREO JACK Y-SPLITTER ADAPTER) plugged into front out for headphones and front speakers.
    You can also get a cable that does similar.

  • Hello I was updating my phone earlier today and it had the connect to iTunes sign on it and I cant get past that sign. I put it up to iTunes and its still doing the same and on my computer it is saying it cant reset my phone. what do I do?

    hello I was updating my phone earlier today and it had the connect to iTunes sign on it and I cant get past that sign. I put it up to iTunes and its still doing the same and on my computer it is saying it cant reset my phone. what do I do?

    Hi sarahlovebell21,
    Thanks for visiting Apple Support Communities.
    If you see the "connect to iTunes" screen on your iPhone, that means its in Recovery Mode and needs to be restored.
    You can find more information and steps to restore your iPhone here:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Best Regards,
    Jeremy

  • Sharing Music with Computer and Airport Express at the same time?

    I just purchased and set up airtunes with some powered speakers.
    I cannot figure out how I can play the same music at the same time to shared computers and the Express Powered Speakers at the same time.
    Can you help me with configuring instructions please?
    iMac G5 with Airport Extreme and DSL w/ iTunes pointing to external hard drive music library.
    PowerBook G4 in the kitchen wireless can share music when computer is selected.
    Powered Speakers on the screen porch with Airport Express connected can only play music when Express is selected.
    How do I fix this so that when we have a dinner party we have the same music in the office, the kitchen and the screen porch all playing together at the same time?
    Thanks.
    I hope my question is clear as I really would love to sort this out before our party.

    Although your problem is slightly different, it seems that you are having the exact same issues that I had just two days ago - solved for me by Felix. If you check the link below, it goes through what I had to do, which was basically to update the software on my airport express base station, which he explains well:
    http://discussions.apple.com/thread.jspa?threadID=476631&tstart=30
    When I did it, it then gave me the option on iTunes (check the picture at http://www.apple.com/airportexpress/airtunes.html to see the magnified bit on iTunes) and then I could just choose multiple speakers concurrently.
    Hope this helps.

  • Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

    hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Problem connecting Firewire device and external HD at the same time

    Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
    The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
    I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

    Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Maybe you are looking for