Connecting two computers with firewire

What is the command to start up a notebook as a firewire drive connected to a lap top?

Just hold the t key at bootup... hopefully the other one is a Mac.
http://support.apple.com/kb/HT1661

Similar Messages

  • Connecting two computers with two routes?

    Yes, can I hook up two computers, each with a different router on one phone line?  I hope this makes sense.  I have one main computer hooked up to a wireless/wired router and the one in another room I want to hook up to the internet also.  Do I need another router for that other computer?  The distance on the wireless does not reach to the other computer.

    Here are my educated guess(es) :
    Perhaps you could..
    #1 use a wireless extender?
    #2 use a wireless bridge?
    #3 convert the second router into a hub/switch/wap?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Connecting two computers with xover cable

    I have the Sun Java System Application Server PE8 installed on a computer under Windows XP Professional, and another computer to connected to it with a crossover cable.
    The client can ping the host, but when the client tries to connect to the app server with a web browser I get a "Failure to connect to web server" error.
    However, I can connect to the app server from a browser on the host itself.
    Do you I need to anything to make the app server accessible from another machine? Perhaps define some security settings?
    bobj5000

    It sounds like you got it right if the client can ping the host so I'm not sure why you can't get to the web server. I would assume if you can ping you would be able to connect to the web server. I don't think this is an appserver issue so I'm not sure you will get a response in this forum. Maybe you could try another resource that deals more with setting up windows boxes using a crossover cable.

  • Problem with connecting two computers with windows7 to the internet at the same time with wrt110

    Me and my friend have both installed windows7 on our computers.
    If one of us connects to the internet via wireless router WRT110 it goes without any problems.
    But if we both try to connect to the internet at the same time, it doesnt want to connect.
    Can anyone help?
    Solved!
    Go to Solution.

    You can try upgrading/reflashing the router's firmware....Download the firmware from www.linksys.com/downloads and save it on the desktop....Login into the Linksys GUI and click on Administration tab...click on subtab "firmware upgrade" and choose the correct .bin file...click on upgrade....Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now,press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Connecting two computers using ethernet

    How do i connect two computers to transfer my iphoto library using ethernet? How do I know how long it will run?

    Why not connect the two using Firewire Target mode. Apple explains how in:
    http://support.apple.com/kb/HT1661

  • Can connect two Macs with USB2 cable?

    Can connect two Macs with USB2 cable?

    You can connect two Macs with an ethernet wire, or conect two Macs using Firewire if one is placed in target disk mode, but that is it.

  • Can I connect two macs with thunder bolt ?

    can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
    thanks for any help

    You can connect the two.  Whether you can use VNC, I have no idea.
    http://store.apple.com/us/product/MC913ZM/A
    Ciao.

  • Cannot connect two computers to the same game server HELP!

    I have a Linksys WRT54G Router.  I have two computers and I want to be able to use them on the same gaming server.  Unfortunately, the game only have one port, so I can only port forward one of my computers.  How can I configure my router to have two external IP addresses to the server so it won't kick one of my computers out.  Thanks!

    Hi,
    I am in a gaming community and many members have a Linksys at home (but I don't know which kind exactly). Many of us try to connect two computers to the same server (many have a family). It seems it is a common problem that no one can connect two computers to the same game server.
    I have a BEFSR41 V3 Firmware version 1.04.8
    I use fixed IP address and no connectivity problem on Internet.
    I have win XP SP2 on both computer.
    I am using a DSL modem
    I can connect the two computers to two different game servers at same time, but not the same server. Default port for this game is the same for all servers I use. I tried with both port forwarding enabled (in that case one PCs can connect the other not) or not (in the second case, whenever the second PC connects, the first one lose his connection to the server, no mater the order I try to connect my PCs).
    Now the weird thing is that one member in my community just decided to throw away his Linksys router and he bought another brand (which I won't name to remains politically correct). Now, without changing anything in his PCs or his connection type, he can now play with two PC on the same server.
    I am seriously thinking doing the same move. Since more and more game are now using Internet (and servers that controls piracy, $$) and family want to play together, not being able to connect two PCs on the same game server makes Linksys in bad situation from marketing point of view.
    For example, in my gaming communtity, we now all know that Linksys can't handle two PC on same server, but other brand can...
    Thank you in advance for your help.

  • Can I connect two computers to one device?

    Can I connect two computers to one device? I am trying to have them control different aspects of the experiment that I'm running.

    That depends upon the device. If it's GPIB, you could
    use the E-NET card to convert it to LAN. That would
    allow control by many computers. The only problem with
    that might be sychronization. That is, Computer 1 does
    its setup. Then Computer 2 does a reset. Compuer 1's
    setup is now gone.
    As another poster suggested, you could always network
    between the two computers.
    [email protected]

  • PLEASE HELP. Two computers with the same External IP Address

    I have two computers with the same IP address which is causing problems. I tried to ipconfig/release ipconfig/renew but I get the error "No operation can be performed on a Local Area Connection* 11 while it has its media disconnected.
    I tried resetting router/modem, made sure "Obtain an IP address automatically" are all enabled. DHCP is enabled.
    Two of the computers have the same one and the other IP is completely different (not 1 or 2 off). When I open the router settings and click DHCP Reservation it shows the IPs 1 number off and all different like you said. i.e ***.***.*.106, ***.***.*.107,
    ***.***.*.108. But with the proxy service I'm using, when trying to allow each computer to use them it shows different IP addresses than what is shown in the DHCP Reservation.
    If I clone my MAC address the identical IP of the two computers changes but they'll still share the same IP. The third doesn't change.
    I tried ipconfig /release - ipconfig /renew - ipconfig /flushdns nothing yet. Not sure about your #2 and #3. And I just updated my firmware.
    Anyone with expertise? Thanks.

    Cyber_Defend_Team and ZigZag3143x I powered down all three computers and turned off/reset the modem and router.
    I restarted them one by one and after, the two computers with the conflicting IP address changed their IPs but their IPs are still conflicting.  The third computers IP stayed the same.
    What else can we do?

  • HT202213 I have two computers with home sharing on, but I can't transfer music. What do I do?

    I have two computers with home sharing on, but I can't transfer music. What do I do?

    What do you mean by "won't pick up the songs"?
    You can only sync with one iTunes library. However, you can manage mauic and videos among different computer by:
    Using iPhone, iPad, or iPod with multiple computers
    You can transfer iTunes purchases to a computer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • Can I authorize two computers withe the same iTunes

    Can I authorize two computers withe the same iTunes

    Yes, you can authorize two computers with the same Itunes Account.

  • Can I use Logic Pro 9.1.6 on two computers with one licens

    I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

    Hi, is  the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
    If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

  • How to connect two computers

    please help me
    how to connect two computers through telephone line

    Double Post. See:
    http://forum.java.sun.com/thread.jspa?threadID=770305&tstart=0

  • What happen when we connect Two PC with IP from Same subnets

    Scenario 2nd : What happen when we connect Two PC with IP from Same subnets. PC1 -192.168.10.1/24 PC2 - 192.168.10.2 on a two different L2 Switch on different vlans which are connected via a LAN cable.
    All ports are access ports
    Interview Question : No More Info.
    Pc1<SwA>------<SwB>PC2
    Q.1 Will they communicate If yes what will be packet/frame flow.
    Q.2 If not where will be the packet/frame drop. ? Why.
    I need step by step if possible plz how the packet moves , vlan taggings n all internal works that happens behind .. plz 
    thnx in advnce ....

    Hi Abhishesk,
    The PCs should communicate each othet.
    Since there is no trunk port involved, there is not tagging involved.
    Since both the PCs are into the same subnet. PC1 will not need default gateway for the communication with PC2. So PC1 will start with sending ARP request for PC2 MAC address.
     Since all the ports in SW1 are in same VLAN, the ARP should reach all ports including the switchport where SW2 is connected to.
    Sw2 has got a complete different access port on ALL the switchports. Sw2 will receive the ARP from Sw1. Remember that there is no tagging for the frame. Hence Sw2 will again send the ARP packet to all the ports which belong to same VLAN wherein the packet is received. ie, Sw2 will send the ARP packet to all the ports in Sw2. PC2 will also get the the ARP.
    The ARP reply will make it way back using the same logic.
    Now both the PCs can start the actual packet exchange.

Maybe you are looking for

  • How to use my own chart of accounts

    Good afternoon, I installed EBS 11i on WinXP a month ago for learning purpose and never learned it before, so I am very new. I got problem using my chart of account to create new journal. That I did : 1. using VIS data, login as user operations setup

  • InDesign infinite loop when exporting INDD as IDML - one specific document

    Hi, I have several thousand INDD files that are generated using CS4. We are migrating to CC server so need to be able to run scripts against these files. One of the scripts performs some (simple) manipulations and then saves as IDML... Except... With

  • Laptop won't turn on with AC cord attached or on battery power

    My laptop recentlystopped working and now will not turn on.  Each time that I try to power on the blue lights flash for approx. 5 sec and then go off and that is it.  Any suggestions as to what this might be?  Thank you in advance

  • Avoiding OutOfMemoryError

    Is there a way to avoid the OutOfMemory Error? Like forcing the JVM to ask the Operating System to create and return more memory using pagefile?

  • Finished installing Verizon Media Manager but execute the program

    I get an error message; c:\Program Files\Verizon Media Manager\Release\Verizon Media Manager.exe The application has failed to start becuase its side-by-sde configuration is incorrect. Please see the application event log for more detail. How do I g