Connecting two iPads via Bluetooth

I would like to connect to another iPad to play games but my iPad dosen't pick up the other iPad via Bluetooth wot can I try

Happy to help
Here's a check list
1 does the game suport Bluetooth multiplayer gaming
2 is Bluetooth on
3 telling us the game/s would help
4 does the game suport wifi network gaming that can help a lot for you

Similar Messages

  • Won't connect to ipad via Bluetooth

    why won't my iPhone connect to my iPad via Bluetoot?

    Well, I should have asked Pagancelt not sleeky as he said above he says he DID it.
    I quote:
    Re: iPad won't connect to iMac via bluetooth 
    Apr 29, 2012 3:35 PM (in response to mccass)
    I was successful in connecting my iPad and 27" iMac via bluetooth for the purpose of internet sharing, so it can be done. I was able to use my iMac's free wifi connection (which the iPad couldn't pick up, as I don't want to stand by the window) to get internet on the iPad. I forget how, unfortunately, which is why I'm back in the forums - my connection went down!
    *Edit: Foolish me. My iMac shows up under "Devices" on the iPad Bluetooth pane in General Settings. All I had to do was tap it to revive the connection (since I paired the devices the first time I set up the connection). iPad is now getting internet off iMac again :-)

  • Connecting 2 iPads via Bluetooth

    A teacher is attempting to use an app called Q-Interactive Assess. The instructions state that the 2 iPads need to connect via bluetooth with both having the same bluetooth name. They have connected sporadically, however they will lose connection at any given time and then are unable to "see" each other. I have already taken the troubleshooting steps with bluetooth issues, and this hasn't helped. She is using new iPad Airs. Thank you.

    Have you contacted Q-Interactive Assess support?

  • When I connect my headphones via bluetooth to my iPad 4 I lose my internet connection?

    I recently upgraded to iOS 7.1 and along with the problem mentioned in the title there are many other, not so major problems but I can put up with them.
    So basically before I updated I could do this fine with no problems but ever since it updated my Turtle Beach PX5 has been able to connect to my iPad via Bluetooth but as soon as the connection is established I lose internet connection which is extremely frustrating as I tend to FaceTime while I'm playing on a console.
    If I go into the wifi settings no possible access points are shown unless I turn off my bluetooth. Although on one occasion I have been able to connect to both services but the bluetooth was very unstable and after 20 or so seconds it seemed to have disconnected itself.
    It's extremely frustrating that I pay money for a quality product (might I add that I've very much enjoyed up to this point) expecting that both these services can run simultaneously when they cannot.
    So I wondered if there is a solution to this? Has anyone else had similar problems? And is there any way I can downgrade as the newest update (for me at least) has been a major disappointment.

    One thing you should definitely try is keeping your iPhone 4 connected via USB cable in your computer and restarting.  This should make the computer recognize that it is connected and as long as you have your iTunes set up to automatically open upon connection with your iPhone you should be all set!

  • Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

    Hi Tomiwa,
    You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
    There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
    That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

  • Morning, is it possible to connect your apple Ipad via bluetooth with a blackberry phone?

    Morning, is it possible to connect your apple Ipad via bluetooth with a blackberry phone?
    Lastly can you download from a wwindows computer to your Apple Ipad?

    No.
    You can use iTunes on a PC to sync content to an iPad.

  • My ipad doesnot connect with Xperia via bluetooth, My ipad doesnot connect with Xperia via bluetooth

    My ipad doesnot connect with Xperia via bluetooth, My ipad doesnot connect with Xperia via bluetooth

    You cannot link to another smartphone via Bluetooth from your iPad except perhaps to use the Xperia's personal hotspot (WiFi is supported, but I'm not sure about Bluetooth). If you wish to transfer files or data, that's not possible.
    Regards.

  • Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

    We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

    Hi there.
    I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
    Welcome to discussions by the way.
    Hope this helps JB

  • Transfer of photos from ipod to ipad via bluetooth, help

    transfer of photos from ipod to ipad via bluetooth, help

    The blluetooth isn't meant to do that. It's largely meant for headphones and keyboards.
    now, if you have the camera connection kit  you can attach your iPod to your iPad using that (plugging the iPod's charging cable to the USB part of the CCK) and the photos will transfer. I've done it with my Touch.

  • I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth.

    I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth. It is recognising the devices but 'connection unsuccessful'

    That is correct.  Macs do not pair to iPhones, iPads, etc.
    However, pairlng is not required to get Handoff to work.  Both devices must have Bluetooth on, but they need not (indeed cannot) be paired.
    OS X Yosemite: Pick up where you left off with Handoff
    You must be using supported devices:
    OS X Yosemite: supported devices for Handoff, Instant Hotspot, Phone Calling, SMS, and AirDrop

  • Can i play a game between two ipads using bluetooth

    Can I play games betwwen two ipads using bluetooth

    It depends on the game. The app has to be specifically written to allow play between two devices via Bluetooth.
    Regards.

  • HT4111 magic mouse to ipad via bluetooth

    can you connect magic mouse to ipad via bluetooth?

    No.
    Apple iOS touch devices are touch devices only.
    Why would you want a mouse to use with a tablet.
    If you need a physical mouse and keyboard, should look at and purchase a MacBook Air instead.

  • Directly Connect Two Macs Via Ethernet

    This has certainly been answered before, but a quick search didn't give any results. So here goes ...
    I wanted to connect two macs via ethernet. I use the mount tool in finder "connect to server" all the time with machines on a network, but I've never done with with two macs directly connected.
    So I connect them and my first instinct is to check the IP address of the machine I want to connect to. I then go to "connect to server" and type it in using the AFP protocol, but it doesn't work.
    At this point I'm stumped and not sure what to do. I don't use the "network" item in the finder sidebar very often but I clicked it, and sure enough the machine I want to connect to was listed, and I was able to connect / mount.
    So here's my question ... if I wanted to use "connect to server" tool, or even mount it manually with the mount command, how would I do it? Is it using AFP still to mount and the IP address is just bogus? Something else going on?

    But I'm telling you I tried using the IP address ... here, let me try again ...
    I find this address on the machine I want to connect to: 169.254.177.122
    I put this into "connect to server" on the machine I want to connect from: afp://169.254.177.122
    It spins for a while, then says it can't connect. Strangely, if I do a cmd-i on the machine in the network sidebar, it says: nfs:// automount ... into /Network
    So are you sure putting in the ip should work? If so what am I doing wrong?
    Okay ... plot thickens. When I cmd-i after I connect, it indeed says it is an AFP connect, but it gives the "local" name, say powerbook.local. But then, if I "ping powerbook.local" if gives me back the same IP I tried in connect to server. Huh?
    mbp:~ rjcarr$ ping powerbook.local
    PING powerbook.local (169.254.177.122): 56 data bytes
    Weird. It isn't that big of a deal ... I just like to know what is going on.

  • Why can't I sinc my iPhone to my iPad via bluetooth?

    Why am I having a problem syncing my iPhone & iPad via Bluetooth?

    Geez... I had such high hopes
    You had completely unrealistic hopes.
    Bluetooth is far too slow for anything more than the smallest of files.
    Considering the fact that iPads and iPhones can store many gigabytes worth of data, you would be waiting weeks to sync your media.
    USB is much, much faster. You can also transfer files via WiFi if the app you're using supports it. When iOS5 comes out later this year you'll also be able to sync via WiFi.
    Bluetooth is just not designed for syncing huge amounts of audio and video data.

  • Where do I find files sent to my iPad via bluetooth?

    Where do I find files sent to my iPad via bluetooth?

    It depends on what the files are. If they were photos or videos they would likely be in the Camera Roll in the Photos App.

Maybe you are looking for

  • Japense language getting displayed in master data not in query

    Hi all, I am trying to load the asset master from ecc and bw which both are unicode. But then the master data gets loaded perfectly with japanese in the master with    asset   language   description 1. 300001   en           加硫 2. 300002   ja         

  • Return Type of Applet's getParameter() method

    Hello I am having win7 machine with a jre 6 update 24 on it . I tried to execute method getParameter("DOCBASE") on Ie8(32bit) as well on IE8(64) bit. I am amazed to see DIFFERENT return value (NULL for 32 bit and Empty String for 64 bit)for both conf

  • Flash Builder 4.7 - unable to open

    I have opened my old 4.6 workspace with 4.7 and updated my projects flex sdk to 4.6.0 located in FB4.7 sdks folder no problems. Now I am getting the follow error: "unable to open '/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flexbu

  • Why is my battery life so short?

    I bought a brand new battery but only get about 2hrs of life out of it.  I've gone through the support pages and tips for improving battery life, but it hasn't changed.  Can anyone help me with this?

  • Issues updating/setting multi value lookup columns via powershell

    Hi All,      I have an issue updating multi values in a lookup field via powershell I can update a single value  lookup field as below but can't get to update if its multi value. As stated below when I hardcode it. It works. No idea what 'm missing.