Connecting two m-audio box's with each other?

Hi Everyone. I've got two M-Audio Solo box's. Is there any way i connect those two with each other so i can use both at the same time in GB?
Many thanks!!!

Just plug them in and create an aggregate device that consists of them. You can open Audio MIDI Setup utility and search its help for "Aggregate" to find out how, or if you want a step by step, here's a tut:
http://thegaragedoor.com/tutorials/agg.html

Similar Messages

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How do I enable two wireless clients to communicate with each other?

    I have a WRT54GL with the latest firmware.  I have two computers which are both connected to the router, with IP addresses assigned via DHCP.  Neither has a firewall running.  I cannot get them to communicate with each other -- even ping doesn't work.  I can ping the router itself using the IP address assigned to it on the WAN side by my ISP.   Both computers have no problem reaching the internet through the router.
    What settings on the router will enable the communication to occur?  I can't find anything in the router's user interface which appears to control this. 
    Thanks.
    Solved!
    Go to Solution.

    Hi annie25,
    I think it would be best to check on netgear or belkin technical forums how to make these two talk. 
    Yesterday is history. Tomorrow is mystery. Today is a gift.

  • [SOLVED] midi and audio playback interfere with each other?

    Hi, thanks for reading...
    I've recently installed tux guitar and have been trying to use it together with an audio player (vlc player).  However I am only able to get one of these applications generating sound at any one time.
    If I load up a tab file and play it (using midi) from tuxguitar I find I am no longer able to play audio files in vlc player or rhythmbox. 
    After quiting tux guitar I can play audio again.  But I can never get them both to work at the same time.  (Really I just want to switch between applications without having to quit one to use the other.)
    Any advice on how to start debugging this would be greately appreciated. 
    Last edited by drandre (2010-01-04 21:32:48)

    brebs wrote:You're probably playing audio through ALSA's emulation of OSS, which means that dmix won't work. You need to output to *ALSA*.
    I just tested it out myself. First, I experienced the same problem that you did. Mplayer wasn't able to play any audio because is said the sound device was locked or in use or something silly. In Tux Guitar, I disabled the JACK and OSS plugins (and a lot of other plugins) and changed the sound settings to "TuxGuitar Sequencer" and MIDI Port "TiMidity port 0 [128:0]. (I have timidity setup as my MIDI "hardware", like it is described in the Arch wiki) After that (and rebooting), I was able to play a TAB file and an MP3 in mplayer at the same time.
    Let me know if you have any questions about what I did.
    DISCLAIMER: This was a simple test. I don't use (or know how to use) Tux Guitar.

  • TS3367 Can more than two people chat on Facetime with each other at once?

    Want to Facetime with my two friends. One has a mac and the other an iphone. I have an ipad. Can the three of us Facetime together? Thanks!

    Only 1 to 1 communication is allowed on FaceTime.
    I haven't tried, but you can take a look at this app.
    http://www.oovoo.com/mobile.aspx?pname=mobileoverview

  • Two cursor variable can match with each other

    I have 2 cursor in one procedure
    it is possible that cursor 1 variable do some calculation with cursor 2 variable.
    for example cursor 1 is for inStock and cursor 2 for Out stock
    Balance = Cursor1.inQTY - Cursor2.outQTY

    Suppose
    Cursor Cursor1 is
    select Idate,Icode,IFcode,Iqty,IPrice from returnreport;
    Cursor Cursor2 is
    select Rdate,Rcode,Rfcode,Rqty,Rprice from TempRed;Cursor1 result is
    IDATE      Icode Ifcode   Iqty        IPRICE        REDUNITS
    28/06/2010   13    1     148375.7308  101.8004   
    30/08/2010   13    1     100284.0398  101.7111  Cursor2 Result is
    Rdate       RCODE  RFCODE    Rqty     Rprice
    01/07/2010  13          1  2804.7464
    31/08/2010  13          1 39315.8646
    08/09/2010  13          1 24515.9089 
    28/09/2010  13          1      80000 
    30/09/2010  13          1 11693.4219  I want to update Cursor 1 table's Column REDUNIT with Cursor 2.
    go_block('returnreport');
    first_record;
    check here IQTY of RETURNREPORT
    Loop
    Cursor1.Iqty - Cursor2.Rqty
    it is like a first in first out basis
    check balance = Iqty - Rqty
    Update Redunits = Balance
    if balance = 0 then
    go 2nd row
    and update remaining balance in 2ns row.
    regards

  • 2 J2EE RI servers which communicate with each other

    Hi all,
    I'm wondering whether the following scenario is possible, and if so, of course I would like to now how I have to achieve it.
    I want to run two j2ee ri application servers on two different machines. What I want, is that the applications on the two different servers can communicate with each other.
    Any help on this will be greatly appreciated.

    Greetings,
    that does the lookup, so I have the bean clasees in
    the classpath of the project (is that what you
    ment?).In addition to the bean classes, the client needs the stub files generated by deploytool - the reason for the ClassCastException is due to that the cast actually gets made against the server stub(s) which, in this case, isn't available to the client. The stubs are generated during deployment and have the same name as your interfaces with the suffix '_impl' (implementation). The first dialog of the deployment wizard has the option to "Return client jar" - select it (a checkbox) and add the resulting jar file (has the same name as your .ear file with the ending 'Client.jar'), to your client's CLASSPATH (just mount it as a filesystem in Forte4J ;). This file has the stubs along with the rest of your bean's associated classes.
    Can you help? I'm realy stuck.I hope this helps.
    Thanks.
    Oded "Shushu" HasidiRegards,
    Tony "Vee Schade" Cook

  • How to automate the adding of check-box along with each numbered item in Framemaker file ?

    I tried using the wingdings font as check-box. But I don't want to use it manually every time. I want to have it as a style part of my procedure style (numbering style).   I need the check-box along with each numbered item. Whenever I apply my numbering style in FM, I should get something like:
    " <checkbox> 1. <text> "

    Use "N:\u2751\ <n+>.\ " for the autonumber format.
    "N" Use counter N
    "\u2751" One of many checkboxes available in Unicode
    "<n+>" increment the counter
    "." ordinary period
    "\ " non-breaking space
    This assumes that you are on FM8 or later, and your Unicode font has that glyph code point populated (Arial Unicode MS does if your font doesn't).
    Don't use WingDings (or Zaph Dingbats) anymore. Using codepage overlays has any number of issues, and these two sets of legacy codepage dingbats don't even match each other.

  • Link two LRT224 with each other using VPN

    What's the best way to connect two LRT224 with each other, which are in two different citys?
    Open VPN or IPSec?
    I think Gateway to Gateway should be the right mode, but I am very unsure with the lot of settings ...
    Solved!
    Go to Solution.

    Try the EasyLink VPN feature of LRT214/LRT224, which simplifies the site-to-site VPN setup.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=03cf456383fc4d958cf918110c7fcd42_How_to_configure_...
    EasyLink VPN works in the following way conceptually.
    1. At the primary site, enable EasyLink VPN Server (inbound tab on the Web GUI) and create an account (username/password) for each remote site.
    2. At a remote site, enable EasyLink VPN Client (outbound tab on the Web GUI), and enters the matching account credentials (username/password).
    3. The remote site will automatically reach out to the primary site to establish an IPsec tunnel.
    Note: LRT224 can support up to five EasyLink VPN peers in a star VPN topology.

  • Can aim users and .mac users video/audio chat with each other?

    today was a crazy day with ichat. two of my friends were able to video chat 1 on 1. my mac is qualified to handle 3-way or 4-way chats. when they invite me, the bubble pops up. i hit accept and the loading spindle keeps on spinning for minutes until it just denies me entrance. they get an error saying i never accepted, so as soon as they invite me, they don't get any other response back.
    could it be that i am on the AIM network and both of them are on the .mac network?
    iMac G5   Mac OS X (10.4.9)   1.8ghz, 1.5gig ram, 3rd party camcorder, latest iChat. router installed.

    can aim users and .mac users video/audio chat with each other?
    Yes. Apple does not have its own publicly available IM service; iChat uses the AIM network, and there are few functional differences between AIM and .Mac screen names. If they are using a client other than iChat, there may be interoperability issues with audio and video chats, or the other client may not support those types of chatting.
    (21228)

  • Connect two floating text boxes in Pages so the text continues

    Hi,
    I'd like to connect two floating text boxes in Pages 5.0 so text continues beetween them. I'm sure that in Pages '08 this function was implemented, is there some way to do this on the new version? Thanks!!

    No, feature removed allong with over 90 others:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Pages '08 or Pages '09 should still be in your Applications/iWork folder.
    Trash/archive Pages 5 and rate & review it in the App Store.
    Peter

  • Two switches in server mode do not advertise their vlan info. with each other

    Hello All,
    I have some queries regarding the VTP advertisement as below.
    Scenario.....
    I have taken two switches named as switch-A and Switch-B connected with each other with port f0/1.I have defined f0/1 as trunk on both the switches.
    Then i created the Vlan 2,3,4 on switch-A ,Switch-A configurations revision number got changed from 0 to 3.But when i look up the same on switch-B the revision number is 0 and the vlan that was created on Switch-A is not replicated to Switch-B.
    Both Switch-A and Switch-B has default VTP domain configured i.e Null
    Both the Switches are in Server mode.
    On both the Switches domain password set to null.
    Why the vlan is not getting advertise from Switch-A to Switch-B?.According to the vtp configuration they both belong to the same vtp domain i.e null.
    So they should advertise the vlan information with each other.
    Your suggestion will be appreciated on this.Awaiting for your reply
    Thanks,
    Mrityunjay singh

    Hi Jon,
    The trunk is up and running fine.Please find the output for  trunk and vtp status as below.
    SWITCH-A output---------
    SWITCH-A(config)#do sh int f0/1 switch
    Name: Fa0/1
    Switchport: Enabled
    Administrative Mode: trunk
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk private VLANs: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    SWITCH-A(config)#do sh vtp status
    VTP Version                     : 2
    Configuration Revision          : 3
    Maximum VLANs supported locally : 255
    Number of existing VLANs        : 8
    VTP Operating Mode              : Server
    VTP Domain Name                 : 
    VTP Pruning Mode                : Disabled
    VTP V2 Mode                     : Disabled
    VTP Traps Generation            : Disabled
    MD5 digest                      : 0x58 0xD0 0x3C 0x06 0x01 0xE3 0xD7 0x4D 
    Configuration last modified by 0.0.0.0 at 3-1-93 00:03:02
    Local updater ID is 0.0.0.0 (no valid interface found)
    SWITCH-B output.......
    SWITCH-B(config)#do sh int f0/1 swit
    Name: Fa0/1
    Switchport: Enabled
    Administrative Mode: trunk
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk private VLANs: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    Capture Mode Disabled
    Capture VLANs Allowed: ALL
    SWITCH-B(config)#do sh vtp status
    VTP Version                     : 2
    Configuration Revision          : 0
    Maximum VLANs supported locally : 255
    Number of existing VLANs        : 5
    VTP Operating Mode              : Server
    VTP Domain Name                 : 
    VTP Pruning Mode                : Disabled
    VTP V2 Mode                     : Disabled
    VTP Traps Generation            : Disabled
    MD5 digest                      : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A 
    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
    Local updater ID is 0.0.0.0 (no valid interface found)
    I have tried by changing the vtp domain name instead of null and it is working fine in that scenario.But my question is why not is works when the  vtp domain is set to null on both the switches.
    Your update would be appreciated.
    Thanks,
    Mrityunjay Singh

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • Both can connect to test sites but not videochat with each other

    I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
    But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
    If we both can videochat with the test sites, how come we cannot videochat with each other?
    Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
    What could be the likely problem?
    On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
    Any help is much appreciated.

    Hi Heng-Yee Yong,
    The test sites are most likely set to have the ports open by UPnP which does not use NAT.
    If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
    I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
    Go to the Network tab.
    Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
    This means your computer will have to take an IP form the Modem.
    This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
    This App can help identify if NAT is a problem
    http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
    Or at least whether you have Consistent NAT or not.
    8:50 PM Wednesday; April 26, 2006

  • Migration between two environments which can't communicate with each other

    My customer is intending to do migration from test environment to production environment using CCM.
    But the two environments are not in the same network.
    The environments' setting is as blew.
    BO TEST Repository can communicate with Web BO Server.
    BO PRODUCTION Repository (Cluster environment) can communicate with Web BO Server.
    BO TEST Repository and BO PRODUCTION Repository (Cluster environment) are in the different network, they can't communicate with each other.
    Setting Target Repository manually in CCM.
    Questions are:
    1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
       Is that right?
    2. If 1 is not right, is there additional setting should I do?
       For example, If I need to open some firewall port?
    3. Is there other attentions should I notice?
    Thanks

    Questions are:
    1. In CCM, as long as both Source Repository and Target Repository can communicate with Web BO Server, the migration will be successful.
    Is that right?
    Yes that is correct
    2. If 1 is not right, is there additional setting should I do?
    For example, If I need to open some firewall port?
    You have another option which is to use the BIAR files. Export your objects to a BIAR file in source environment, and import them from BIAR into the target environment
    3. Is there other attentions should I notice?
    when using BIAR files as solution, Make sure that you keep them < 1GB size to avoid corruption
    you may have to increase or adjust timeouts on input and output repository servers as well

Maybe you are looking for