Connecting Two Monitors VIA USB

I was wondering if there are any setups for connecting two external DVI monitors VIA USB to my Macbook Pro late 2011.
OS X Mavericks 10.9.5

For external displays you will have to use the Thunderbolt port ( with appropriate adapters) .
Ciao.

Similar Messages

Is it possible to connect two Macs via USB ?

Is it possible to connect two Macs via USB just like Firewire back in the day via Target mode or is there something similar? I am asking this because about 2-3 years ago I would normally image Macs via Target Mode. I used to have a regular Macbook running 10.6 along with a customized-ready-to-go .dmg image saved on the Desktop. Whenever I needed to put that image into any Mac I would simply connect the two Macs via Firewire, I would then press "T" at startup which will get me in Target Mode, I would then see the disk appear in the desktop of the Mac I had the image. I would then copy that image to the T mode macbook using super duper. Can this still be done through USB with new models and if so will I also need to press T at startup ?

No, USB connection does not qualify for this, only firewire and thunderbolt, as I read (but cannot test, for the time being I have only one such mac around).
This is why the short series of alu MBs (2008) are not qualified for target mode either.
p.s. What ‘new models’ do you refer to?

What is the best way to connect two monitors to MacBook Air?

I have a MacBook Air and I want to connect two monitors to it (not Thunderbolt Displays). I was thinking about using a Mini DisplayPort to DVI adapter to connect one monitor and a USB to DVI adapter to connect the other (such as Diamond BVU). But I have heard that this causes it to become slightly slow to respond on Mission Control and causes videos to lag. Is there anyway to connect two monitors without the lag? Or should I just use one monitor?

The MacBook Air only allows daisy chaining monitors via Thunderbolt with Apple's Thunderbolt displays so you'll need to go 3rd party with something like -
http://www.spectrumaudio.com/matrox-dualhead2go-digital-mac-edition.html?gclid=C JzWuvHM0LMCFSXZQgodHWYApg

Can I connect two monitors to a Mac Mini?

Can I connect two Monitors to a mac mini

Yes, but how depends on what model of Mini and what kind of monitors. Early models only had one monitor port. Later models had a Mini-DVI port and a Mini-Displayport. Current models have a Mini-Displayport and a HDMI port. The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter. The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such. So, again, the answer is "yes", but with limitations

Can i connect two monitors to my mac book pro with HDMI?

can i connect two monitors to my mac book pro with HDMI?

I retract my previous "No." If you can live with limited performance (slow refresh/choppy action video/no gaming) on the second external monitor, you could use a USB video adapter and a DVI-HDMI adapter to connect it to a USB port on your computer.
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Just a note about the system information that appears below your post: iOS 4.3.3 does not run on Macs, only on iPods, iPads and iPhones. When you're posting about your MBP, it would be more useful to those responding to know which version of Mac OS X you're running. Doesn't matter for purposes of this post, but something to remember for future posts.

How do I connect two monitors to my macbook pro?

How do I connect two monitors to my macbook pro? This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

The MacBookPro only has enough horsepower in the video card for one external monitor.
If you want two or more, you need a MacPro.
Or a MacBook Pro and a Remote Desktop controlled MacMini.
http://www.apple.com/remotedesktop/

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

Connecting my 6630 via USB

O/S - Win XP SP 2
Phone - 6630
PC Suite - 6.81.13
Hi
I'm trying to connect my 6630 via USB, i've installed and re installed PC suite but even though Windows recognises my phone, and installs the drivers etc. the Get Connected dialog on PC Suite shows as connecting but there is no response. What might be the problem and what should I do?
YK

What is the response you are waiting for ? What areyou trying to do with the PC Suite and how ?

Connecting MIDI controller via USB

Does anyone know how to connect a Roland SH-201 to a MacBook Pro via USB to use as a midi controller in Logic Express 8. I've installed the SH-201 driver, however I am getting a warning saying it is not compatible with an Intel based Macbook.
Just some general guidance in connecting a keyboard via USB to work within Logic Express 8 would be good.
Thanks.

Well, if the synth's USB driver is not compatible with your laptop's system, there is nothing you can do about it I'm afraid. There is always an option to get a portable USB to MIDI Interface (price would be around $20-50, I think) and connect your synth to Macbook Pro through it.

Directly Connect Two Macs Via Ethernet

This has certainly been answered before, but a quick search didn't give any results. So here goes ...
I wanted to connect two macs via ethernet. I use the mount tool in finder "connect to server" all the time with machines on a network, but I've never done with with two macs directly connected.
So I connect them and my first instinct is to check the IP address of the machine I want to connect to. I then go to "connect to server" and type it in using the AFP protocol, but it doesn't work.
At this point I'm stumped and not sure what to do. I don't use the "network" item in the finder sidebar very often but I clicked it, and sure enough the machine I want to connect to was listed, and I was able to connect / mount.
So here's my question ... if I wanted to use "connect to server" tool, or even mount it manually with the mount command, how would I do it? Is it using AFP still to mount and the IP address is just bogus? Something else going on?

But I'm telling you I tried using the IP address ... here, let me try again ...
I find this address on the machine I want to connect to: 169.254.177.122
I put this into "connect to server" on the machine I want to connect from: afp://169.254.177.122
It spins for a while, then says it can't connect. Strangely, if I do a cmd-i on the machine in the network sidebar, it says: nfs:// automount ... into /Network
So are you sure putting in the ip should work? If so what am I doing wrong?
Okay ... plot thickens. When I cmd-i after I connect, it indeed says it is an AFP connect, but it gives the "local" name, say powerbook.local. But then, if I "ping powerbook.local" if gives me back the same IP I tried in connect to server. Huh?
mbp:~ rjcarr$ ping powerbook.local
PING powerbook.local (169.254.177.122): 56 data bytes
Weird. It isn't that big of a deal ... I just like to know what is going on.

Problem Connecting Two Monitors

Just set up a new HP Mini 300-30 with two monitors. Monitor connection is through a device I bought that has HDMI cable connecting to back of HP Mini and two outlets on device to connect two monitors using VGA cables that came with each monitor. Monitors work but are set up with mirror image and I have not been able to find a way to make each monitor run indpendently. If I use keyboard and press Windows key + P it brings up a screen where I can select monitor options. I select the option to run separate monitors but nothing happens. I believe I have tried everything but the correct way.

Hello @RedWingFan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer is not able to display two independent images, and I would be happy to assist you in this matter!
To ensure your displays are configured correctly, I recommend following the steps in this document on Using Two or More Monitors with One Computer (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

Hi tanuj178,
If you had an issue while restoring your iPhone and are now seeing an icon instructing you to connect to iTunes, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

How do you connect two monitors to macmini

how do you connect two monitors to macmini

Hello, is this the latest Mini?
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Details:
*With 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM is reserved for graphics use.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

HT1386 During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect

During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?

Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen

Connecting 6720 Classic via USB crash PC USB devic...

When connecting 6720 Classic via USB cable to my Acer laptop all USB ports on laptop seize to work and Windows display a message that the USB device has malfunctioned. Eventually the PC is permanently stucked and only way to proceed is reset laptop on power button and prior to that remove the laptop charger to entirely power it off and let it reboot on battery. Harddisk controller is permanently indicating with a green light but harddisk is not spinning. When this happens the Nokia phone does not prompt for USB usage (connection type) and is also hanging in application execution for a while. I would like to be able to configure the phone not to charge via USB, but have not found a way to do that. I believe that the charging via USB is creating a low level hw driver and power surge problem in my laptop. Problem is not consistent but happens from time to time. When connecting the normal 230 VAC charger to Nokia device so the Nokia device is charging when connecting to laptop via USB the problem does not occur. In this situation the Nokia device will not try to charge from USB connection.
Any possibility to disable the charging over USB on the Nokia 6720 Classic device??

I had the same problem with my 6720 when I connected it to my HP laptop via USB to download maps. It crashed my computer making all USB ports unusable until I restarted the computer again. I think it happened after I downloaded the necessary software upgrade. I had to eventually use bluetooth to transfer maps data to my phone. It worked without any hitches. Can someone at Nokia fix this problem with the USB?

Connecting Two Monitors VIA USB

Similar Messages

Maybe you are looking for